Urgent help on new patches for india localisation..

Hi all ,
My instance is 11.5.9 is at india localisation level 105D2.
I have to upgrade it for Cess, Service and Vat tax.
Please suggest me which all patches i need to apply.
Is there any issue in upgrading for Cess, Service and Vat tax at 105D2 level.
Regrads
shashi bhushan
[email protected]

Hello,
you will absolutelly need a JAVA stack to use Adobe Forms. It can be a double stack installation, or a stand alone JAVA installation of the same release connected to the ABAP.
Best regards,
Dezso Pap

Similar Messages

Urgent help needed - new to Macs, accidently cut and paste over top of photo folder and now no sign of folder or file, no auto back-up in place, how can I restore photos pls

Urgent help needed - new to Macs, accidently cut and paste over top of photo folder and now no sign of folder or file, no auto back-up in place, how can I restore photos pls

Thanks for prompt reply, yes we have tried that but have now closed down the browser we where the photos were.
We haven't sent up time machine, do you know whether there is any roll-back function on a Mac?
Thanks

New patch for MSI Media Center Deluxe II

all-
forgive if this has been posted before, but there is a new patch for the MCD II. it upgrades it revision 3. i will try it out tonight when i get back from my LSAT class.
http://www.msi.com.tw/program/support/driver/dvr/spt_dvr_detail.php?UID=447%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20&NAME=MS-8912
i wish MSI would make it easier to find or notify somewhere on the website about these patches. also it would be nice to read what exactly these patches fix.
currently the only issues i have with MCD II is the slideshow doesn't work for My Pictures, and you can't stop a video file in the middle and switch to another entity- say TV, DVD, or even music without have the sound in the video file continue onwards.
not sure if i should uninstall current patch to install 2nd patch, but will try all combinations to see which one works.

what a waste of 18 MB. the update did not fix anything at all. the slideshow bug is still there, as is the video file sounds.
i did a clean uninstall of the previous version, and installed from the CD, then applied the patch. no difference.
did a clean install from CD, applied patch 1, then applied patch 2. no difference.
worse of all, the program, when exited, does not switch the monitor refresh rate back to what it was before. (this was fixed from the previous patch).
but i won't discourage those who had issues with the first patch not to use the second patch- maybe it will fix mcd2 for them. for i had no real problems with the 1st patch.

New patches for SAP GUI 6.40 and the Screenreader Extension

Hi,
patch 10 for SAP GUI 6.40 and version 8 of the screenreader extension have been published on service.sap.com and ftp.sap.com.
Best regards,
Christian

Hi John,
short update: I talked to the service market place team, and unfortunately the software corner is not a standard SMP site, so the nice features you know from other pages are not available, and won't be in the near future.
I will post news about new patches here, but as mentioned this is not part of the official workflow and may not always happen, for example when I'm on vacation
Best regards,
Christian

Urgent help required...for replacing JSP session variables

I am trying to enhance the performance of a j2ee based webapp which use session variables to store the data...
Is there any alternative for session variables..The project is based on j2ee-Struts frame work..But the amount of code maintainance should be minimum ....so i can't create beanforms for all these data...
Is there any XML based methods available...??

ok... thanks... i created a fla file and inthe action script
pasted the following code
var nc:NetConnection = new NetConnection();
nc.connect("rtmp://flash.ispstream.com/ondemand/unikron/my_video_dj/");
var ns:NetStream = new NetStream(nc);
contentMain.myVideo.attachVideo(ns);
ns.setBufferTime(5);
ns.play("dvd_r");
nothing is working if i tried to load... can u help me out

Re : Help on New harddisk for T41

I need help on how to get baCK THE ibm ACCESS on the harddisk.
I have changed a new harddisk but did not have a copy of the window xp
except the product key.
Now I could not even get into IBM access to do anything.
Please help !

It might be too late because of the model, but you can contact Lenovo to get a copy of the Recovery Disks. They are typically $45, but if the hard drive was faulty, and was still under warranty, they might be able to send them to you for free.
T61,T42(x2)T41,T40(x2),R40,T30(x2),T23(x3),T21,T20,X20,A31,A21M,600/E/X(multiples of each),770X,i1400(x2),760XL,760ED(x2 w/base),380XD,755CD,750P,360P,365X,560X,701C/CS,730T,PS/Note

Need help. New camera for student

I need a need camera for my 15 year old girl who is taking photography. she needs a camera with a reflex system or a digital camera with a "M" (whatever that is). can anyone advice which would be the best camera and best price.
I do not wish to buy something fancy, I need something affordable and to meet requirements for class.
thanks for the help

It actaully depends on the budget. There are some point and shoot camera with manual controls like Canon G12, Nikon P500. If you want one with interchangable lens than can go with DSLR cameras. Few days back Canon has announced 2 new DSLRs Canon T3i and T3 you can have a look at the Canon T3i Preview. Also it is quite possible that Canon drops the prices for Canon T2i or Canon T1i since the new one has come, so if you can wait for few more weeks than might see some drop in prices.
This information is provided "as is" for information purpose only, I am professional content editor at Camerafobia Blog - Digital Camera, DSLR Reviews
I am hobbyist photographer and have played with most of the leading cameras.

URGENT HELP REQUIRED - E-filing for GB - IMG CONFIG

Hi
We are on ECC 6.0 and have just installed XI. I am trying to complete the SAP IMG Config, however there is limited documentation about this, particularly the constants and e-mail content.
Does anyone have any useful (ideally step by step) documentation on how to complete the customisation?
Your URGENT assistance is greatly appreciated.
Thanks
Michelle

Hi refer theses links
http://help.sap.com/saphelp_erp2005/helpdata/en/cd/5a0641f753f523e10000000a155106/frameset.htm
EOY2007 GB (E-Filing)

Urgent Help in User-Exit for MM!

Hi,
1. I am writing code in the Exit "EXIT_SAPLMGMU_001".
2. I have to pop-up error/warning messages for incorrect data entered in various fields/screens/views of MM01/MM02 transaction.
3. The Exit gets triggered when i press "SAVE" after modification.
4. When I create the Classification View, i enter the class type as "001" for material class.
5. Then i need to enter a value "Z_Product" in the class column(on the screen in classification view). This class is the "Product Class" (description).
      My problem is to find this value that i enter on screen before "Save" i.e. when i am creating material for the first time in MM01, i dont want the error message to pop-up if i am entering any value in the class column and also entering values in the internal characteristics for that class.
      Basically i want to read the values (before "SAVe") entered in the class column as well as want to know the values for the internal characteristics of the class.
      For Class, the std. field is "RMCLF-Class" , but i have no buffer field available in my exit that contains the value for the Class. I have also tried using "Get parameter ID", but it doesnt work.
      For Internal Characteristic values (of the class) that are entered in the tab(that appears on pressing "Enter" after filling the Class value) below the Class tab, i am fetching data from std. table AUSP to check for corresponding entries for that particular material number....but this table will get updated only after "SAVE" and so i would be able to read the values only in MM02.
Please help me in finding out a way for reading the class values & Characteristic values in my user-exit.
Thanks & Regards,
Tejas

Hi Ronak.
You can try with <b>'EXIT_SAPLCLFM_002' (CLFM0002)</b>. This is the exit for the classification view. You can get this for the transaction CL22N / CL24N.
This is also called in MM01 for classification values. This classification details are cross application components. So This is also called from other transaction.
Regards
Rusidar.

Really urgent: help in making report for status of vendor payement

Hi,
I am making a report in which i have to display the status of vendor whether it is paid or not?
Till now i am able to have knowledge that when we do MIGO there are the Financial Documents form there i get the account no.. whichit is stored in the BKPF table. From there we have the account no... and after that there are 4 tables into which i have to look after the tables i.e. BSAS,BSIK,BSIS, n BSAK.
Plzz tell me how should i make a report as the Acount no.. have to move among these tables to get the status of it pament.
plzz provide me some guidelines for making a report for it as help will be deifnately rewarded.
Edited by: abaper2008 on May 21, 2008 6:52 AM

Hi,
Hi,
I making a report in which i have to display the vendor payment is done or not?
Curently i am using the 4 tables of Financial :-
BSAK,BSIS,BSIK AND BSAS which gives the status of vendor whether it is paid or not . 1 thing i observed that data compared wit htew MKPF table among these tables(BSAS,BSIK N BSAK) is not coming right as i am taking common field XBLNR among them all .
One more thing i observed that BLART is getting changed in each table.
for instance,
if the BLART is WE for material document and i am taking XBLNR filed from this table MKPF and den looking XBLNR in BKPF where the entry consist of BLART - RE n WE and finally when i look up in the BSAK table the field consist of RE .
How can i see that it is being paid or not the BLART is keep on changing.
Plzz proivde me guidelines as how to rectify the problem?
Edited by: abaper2008 on May 21, 2008 9:03 AM

Need urgent help on iOS 8 for iPhone 4S. I am unable to start my device after the update

Friends,
I wanted to upgrade to iOS8 on my iPhone 4S. I was not connected to iTunes. Clicked install while I was on a WiFi connection.
Post that I tried restarting and it is showing a pictorial diagram asking me to connect to iTunes.
I connected to iTunes and now it is asking me to restore. After going ahead with restore it is saying device can't be found.
I am really worried. Can anybody help me here.
Thank you.
Amol
<Personal Information Edited By Host>

Hey Amol B,
Thanks for the question. I understand you are experiencing issues updating/restoring your iPhone. Let’s try forcing the device intro recovery mode once more:
If you can't update or restore your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT1808
If your device is not recognized while in recovery mode, see the following resource (specifically Step 5, sub step “If the device is not recognized while in Recovery Mode”):
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Thanks,
Matt M.

Help Neede: New API for KM

Dear All,
I have found that com.porta.security.IUser class is deprecated in new release and it is giving error.
I have to get <b>ResourceContext(IUser)</b> object to access KM. What is the new way to access KM docments using new API?
Please provide some sample code if possible.
Kind regards,
Sreejesh.

Hi,
With "deprecated" you mean this class
om.sapportals.portal.security.usermanagement.IUser
What do you mean with "giving error"?
As to my knowledge you currently have to live with the deprecated IUser class for using the KM API. The current
com.sap.security.api.IUser
will not work.
Kind regards,
Dominik Witte

Help Need New Driver For MG2100 Where Is It?

I am having a hard time finding the driver for Canon Printer all in one the MG2100 series where is that can not find it please help also when I needed to print out my homegroup setup with password I get a error and it wont print help please ty
Error Code is 2147500037

Hi CynthiaAvey,
Thanks for your reply! We suspect you may have the PIXMA MG2120 printer, which often appears with the the phasing "2100 Series" on the manual and packaging. However, the official model number can be found on the unit itself, typically on or near the control panel. If the PIXMA MG2120 is indeed your printer, you can download the driver from the following page:
http://usa.canon.com/cusa/consumer/products/printers_multifunction/photo_all_in_one_inkjet_printers/...
However, if you do have a different printer, or the link above did not allow your PIXMA MG2120 to continue printing, please visit the link below for further assistance. Thanks so much!
http://www.usa.canon.com/cusa/consumer/standard_display/contact_us_consumer
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Help with new computer for Photoshop Use ?

I am going to upgrade my laptop (prefer using laptop for various reasons) and I have the choice of two laptops. Yeah one is more expensive and is a gaming laptop but I just want to know which will work best with Photoshop CS6
The two laptops I have the choice of and I don't want any other suggestions please as I only have these to choose from are:
HP Envy DV7
(details here)
Samsun Series 7 Gamer
(details here)
The specs might not say but they both come with Win8 64 Bit
I know the Samsung is a high end gaming laptop but that dosent mean it will be great at photoshop and would the cheaper HP do photoshop just as well for less money ??
I would greatly appreciate any help and advice
thanks

Honestly, one cannot hope to advise you reasonably on how best to run an application as complex as Photoshop without your having stated any of your needs or goals. Pretty much any modern computer will be able to run Photoshop. But...
What kind of work products are you going to want to make with Photoshop?
Big images? Small images? Huge images?
Are you planning to do things that rely heavily on the GPU? 3D?
Are you going to work with an external monitor? Is color-management important to you?
CS6_User wrote:
would the cheaper HP do photoshop just as well
That's a kind of meaningless question.
It's akin to asking, "Would a Dodge take me to the store better than a Ford?"
If you're considering doing serious Photoshop work I'd suggest reconsidering a desktop system. Laptops are typically optimized for things other than what Photoshop needs.
-Noel

Urgent help: L3 daughter card for Nexus 5548

Hi
We have 2 Nexus 5548 which is in one vPC doamin. All the servers are teamed to these switches
Requirement
We have to install New L3 daughter card.(N55-D160L3-V2(=))
I have gone through the Cisco websites and found that we have to do the following things
1. software version:
i Nexus 5548P Daughter Card (N55-D160L3)
Before installing a Layer 3 daughter card (N55-D160L3) into a Cisco Nexus 5548P switch, you must upgrade to Cisco NX-OS Release 5.0(3)N1(1b) or NX-OS Release 5.0(3)N1(1c) and then install the card into the chassis.
http://www.cisco.com/en/US/docs/switches/datacenter/nexus5000/sw/release/notes/Rel_5_0_3_N2_1/Nexus5000_Release_Notes_5_0_3_N2.html
2. license:
Also in order to enable this module following license should present on N5k device:
LAN_BASE_SERVICES_PKG - it's free and lifetime.
https://supportforums.cisco.com/thread/2121574
I have 2 questions
1- In cisco documentation its says that these cards will be installed in the front where I/O module is and after NX OS 5.X they are hot swappable
Does that mean that no reboot will be required after installing this module (keeping in mind its the first time) so i am confused about the wording ???
Does license installation requires reboot??? in short if you are installing for the first time do we require a reboot ???? that is my main question
2- I have heard there is a known bug which keep rebooting the switch after installation of L3 card
http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCtl45495
has that been address in any version of license or NS-OS yet???
Thanks heaps guys
If the module is still offline when the requirements are met above, it could be a bug.(CSCtl45495) Try reloading the switch.

1- In cisco documentation its says that these cards will be installed in the front where I/O module is and after NX OS 5.X they are hot swappable
Does that mean that no reboot will be required after installing this module (keeping in mind its the first time) so i am confused about the wording ???
Answer: -- Yes no reboot is required.
Does license installation requires reboot??? in short if you are installing for the first time do we require a reboot ???? that is my main question
Answer: As you are installing the license for the first time reboot of the box is not required.
2- I have heard there is a known bug which keep rebooting the switch after installation of L3 card
http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCtl45495
has that been address in any version of license or NS-OS yet???
Answer;--No this is not fixed yet.
HTH
Regards
Inayath
********Please do not forget to rate the post if this info is helpfull.

Urgent help on new patches for india localisation..

Similar Messages

Maybe you are looking for