URGENT HELP PLEASE.....IDVD PROBLEM

Hi there this is serious. I shot footage on a sony hdv z1 as 50i and imported into final cut as apple pro res 25p, edited then exported out as apple pro res 25p. The footage is 16mins and the file size is 10.67gb.
The aim of this project is to go to dvd for my client.
Now when i watch the footage in quicktime it plays back perfect and looks really good.
So I imported the footage into the latest IDVD used a very nice custom menu but when I play my source material into the window as a preview I am getting alot of jittery lines e.t.c?
What is causing this and better yet what is the solution?

Do you see your camcorder listed in the following link/s?
http://support.apple.com/kb/HT1014#2
After reviewing the specs on this sony camcorder, I'd recommend using apple's FCS 2 as opposed to apple's i-apps.
Suggestion only: You have a great sony camcorder so stay with apple's pro apps for best results. Otherwise you may be a bit disappointed if you opt to use apple's iApps with this particular model (especially if it's not listed in the above mentioned / supported camcorders) .... You won't be doing yourself any favors by using consumer software as opposed to apple's FCP, Compressor, and DVDSP.

Similar Messages

Urgent help please - iDVD from iLife 09 - Won't start normal, can't quit ..

All,
I was in the middle of a job and things were going fine. Incorporating some changes to template supplied. I really don't know what I did, but now I cannot exit iDVD. Each attempt to quit ends with a "unexpected end", and any start of iDVD starts with the last one there. I can drag and drop existing projects but can't start a new one. I've tried deleting prefs file - didn't help. I did the "boot the OS X install and fix permissions" ... still nothing. It just seems stuck with this inability to exit cleanly. Do I need to reinstall, if so, what's the best way? Should I delete the one I have and install from iLife '09 disk?
I'm right in the middle of trying to finish up a job.. Thanks in advance!!

SDMacuser wrote:
Sounds like you have adequate boot volume space. What I would try first is to copy all video assets for iDvd to the boot volume since iDvd likes things where it can easily find them. Then I'd eject the 3rd party ext. HHD. Pro apps give you a bit more latitude in this regard but iDvd tends to be picky about what it will or will not use (at least when compared to apple's pro apps / DVDSP).
Btw, you did properly format the ext. firewire HDD with apple's disc utility, did you not?
Message was edited by: SDMacuser
Location of the assets has never been a problem and isn't here (nor should it be, else Apple wouldn't give us the ability to put projects elsewhere) .
It can work with every bit of the asset if I drop the project file onto the dock icon. I also have and use Final Cut Studio Pro so I'm well aware of its capabilities. All drives, eSATA, FW800, and USB are formatted correctly for Intel based Mac.
I hooked up the backup system drive, copied the plist from there, and renames all the DVDPROJ files so iDVD could not find them. A bit Draconian, but so far it is letting me back in normally, and exit normally. I'll have to retrace the steps, but as long as it holds hopefully I won't hit it again.
Interestingly, after my first attempt at deleting the prefs file, iDVD did not generate a new one, which was odd. So hopefully I'm back to a solid starting point.
On a side note, is there ANYWAY at all to add additional font sizes to the drop down list for text? I know in earlier versions there were sliders that allowed for font sizes to be changed. There are a few places on this project (4:3) where I'd like to keep things in bounds for SD NTSC output, but have text a bit larger.
Thanks again...
Jay S.

URGENT help please. Problem creating Chinese language text field in Adobe LiveCycle.

A client requested to create an employee details form in which few text fields has to be in Chinese language. I selected "Arial Unicode MS" for that fields. In final PDF I am able to insert text in Chinese text fields in Acrobat. But I cant insert text when i opened the final PDF in Adobe Reader. (only these Arial Unicode MS fields are disabled). All other fields (English) are in Arial font., they are working in both (Acrobat and Reader). As these forms will be distributed to people who may don't have Acrobat and only the Free Adobe Reader. Can someone please advice me how to solve this problem.
Thank you
- Amal

Make sure the format of the date strings provided by the calendar is what you are expecting. Or use the "formattedValue" for the input strings.

b font color ='red' Java JDBC and Oracle DB URGENT HELP PLEASE /font /b

Hello, I am a newbie. I'm very interested in Java in relation to JDBC, Oracle and SAP.I am trying to connect to an Oracle DB and I have problems to display the output on the consule in my application. What am I doing wrong here . Please help me. This is my code: Please Explain
import java.sql.*;
import java.sql.DriverManager;
import java.sql.Connection;
public class SqlConnection {
 public static void main(String[] args) {
 Class.forName("oracle.jdbc.driver.OracleDriver"); //Loading the Oracle Driver.
 Connection con = DriverManager.getConnection
 ("jdbc:orcle:thin:@34.218.5.3:1521:ruka","data","data"); //making the connection.
 Statement stmt = con.createStatement ();// Sending a query to the database
 ResultSet rs = stmt.executeQuery("SELECT man,jean,test,kok FROM sa_kostl");
 while (rs.next()) {
 String man = rs.getString("1");
 String jean = rs.getString("2");
 String test = rs.getString("3");
 String kok = rs.getString("4");
 System.out.println( man, jean, test,kok );//here where my the
 //compiler gives me errors
 stmt.close();
 con.close();
}

Java JDBC and Oracle DB URGENT HELP PLEASEToo bad your attempt at getting your subject to have greater attention failed :p

Urgent help please, I made an file with the size 1024x768, then i made two folios, one for retina 2048x1536 and one for non retina 1024x768, i have alot of video content in it, everything works perfect on my retina ipad, but when i open it on ipad 2 an er

Urgent help please, I made an file with the size 1024x768, then i made two folios, one for retina 2048x1536 and one for non retina 1024x768, i have alot of video content in it, everything works perfect on my retina ipad, but when i open it on ipad 2 an error appears on the pages with video content?

its in german:
der Vorgang könnte nicht abgeschlossen werden.
something like the process coundnt be completed

HELP WITH IPHONE 4S IPHONE URGENT HELP PLEASE?

IPHONE URGENT HELP PLEASE?
for the whole day my network has been 'Searching...'
i have tried airplane mode on and off, turning my phone on and off and network reset and taking sim in and out.
so i backed up my phone and restored to factory settings as i don't think i did the option of choosing manually select a carrier.
my network is still 'searching...' and it won't let my wifi to allow me to activate my iphone. i have tried to connect to itunes and it still won;t work.
i keep getting a message about no activation server.
this is a new iphone. i got it replaced on saturday.
PLEASE SOMEONE HELP ME!!!!!!!!!!!!!!!!!!!!!!!!!!!

Hello,
If this is a new iPhone then you will have free access, as all iPhones come with it, to Apple support. I would have them take care of an issue like this.
Hope this helps.
Regards,
Jake

Just bought Elements 13. Input serial number (starting 1057), which is not recognised and the installation stalls here. Urgent help please...

Just bought Elements 13. Input serial number (starting 1057), which is not recognised and the installation stalls here. Urgent help please...

Maryrhire910 I am sorry that you are facing difficulty downloading and installing Photoshop Elements 12. Are you downloading the installation files from Download Photoshop Elements products | 13, 12, 11, 10? If so what specific error are you receiving?

Load XML in intranet ? urgent help please...

Dear friends, I need urgent help: I have a CAYIN screen (which lets me display evetns, etc) and gives me the option of loading/displaying a FLASH (SWF) file, well, I need this SWF to load some XML data ("texto.xml") but seems that when the CAYIN program which executes flash, does not allow the SWF to find the XML in the same folder...
Then I tried many ways to load the XML file with no success till now. Some tries are :
obj_xml.load("\\192.168.0.100\media\texto.xml")
obj_xml.load("\media\texto.xml")
obj_xml.load("texto.xml")
obj_xml.load("../media/texto.xml")
obj_xml.load("\\media\texto.xml")
obj_xml.load("file:\\192.168.0.100\media\texto.xml")
obj_xml.load("..\\192.168.0.100\media\texto.xml")
I guess I am writting something wrong or forgetting something. Would anyone please help me ? because these files are in an internal server "192.168.0.100" (intranet).
Urgent help please, thanks in advance,

if the swf is in a directory with subdirectory media which contains texto.xml, use:
obj_xml.load("media/texto.xml")

URGENT HELP PLEASE (MY N73 sometimes do not recive...

i am facing this problem with my nokia n73 , sometimes if i try to open the inbox from the main window (i click on messages) , the inbox will not opened it will stay on the main window and if there is any one how sent me a message it will not be delivered even no delivery report will be shown on the sender mobile , but if i turn off then turn it on all the messages will be display, please i need your urgent help, because i send my mobile to nokia store to install a new software just before one month. because it used to hang when i use the camera.

hi! i went to nokia yesterday and they said that the only solution is to upgrade the software but you need to do a back up coz all the data will be lost. My phone is good condition now and i can received messages without restarting my phone over and over again...
give me also a update on after you send it to nokia center...for upgrading new software.

Urgent Help Reqd: Delta Problem....!!!

Hi Experts,
Urgent help reqd regarding follwoing scenario:
I am getting delta to ODS 1 (infosource : 2LIS_12_VCHDR) from R/3. Now this ODS1 gives delta to Cube1. I got one error record which fails when going to cube (due to master data check).And this record would be edited later.
So I thought of re loading cube and using error handling to split request in PSA and load valid records in cube.Later when I have coorect info abt error, I would load erroneous record manually using PSA.
I did following steps:
1)Failed request is not in cube...(setting is PSA and then into target)....also it has been deleted from PSA.
2)Remove data status from source ODS1.
3)Change error handling in infopackage to valid " Valid records update, reporting possible".
4)start loading of cube.
But when I did this I got following message :
 "Last delta update is not yet completed.Therefore, no new delta update is possible.You can start the request again if the last delta request is red or green in the monitor"
But both my requests in cube and ODS are Green...no request is in yellow...!!
Now the problem is :
1) I have lost ODS data mart status
2)how to load valid records to cube, since errorneous record can be edited only after 3- 4 days.
3)How not to affect delta load of tomorrow.
Please guide and help me in this.
Thanks in advance and rest assured I will award points to say thanks to SDNers..
Regards,
Sorabh
Message was edited by: sorabh arora

Hi Joseph,
Thanks for replying....
I apolgize and I have modified the message above..
I just checked in cube...there is no failed request for today...and neither in PSA....Person who has handed this to me may have deleted this is PSA..and why req is not in failed state in cube...I am not sure..though setting is "PSA and then into data package".....
So how to go frm here....
Thanks
Sorabh

URGENT HELP PLEASE - drop index hangs on SAP

Hi all,
OS = Linux
DBVersion = Oracle10.2.0.2
Need some urgent help advise please on how to get around this problem.
On a SAP system, am trying to drop six indexes, largest is 300MB and smallest is 50MB.
I tried running drop index sapusername.index_name on the 50MB index via SQL*Plus and it seems to be taking forever. Can anyone please suggest if there is anything I can check on the database on why it is taking such a long time?
I can leave it to run overnight but worried that when I come back the next day, it will still be hanged. Is there any quick way of dropping the index, .i.e. drop immediate ... :-)
Am not using SAP's BRTOOLs as it is also hanging from there and the SAP-ADMIN had approved for the DBA to drop it from our end instead.
Any response and advise on this will be very much appreciated.
From Google'ing, I found some that mentioned that the fault could be because of the existence of the constraints on the table that I am dropping the index of.
Checking the table, it has 17 SYS_ named constraints. None of these constraints have INDEX_NAME that refers to the indexes that am dropping.
Should I disable the constraints and then run the drop index again?
Thanks in advance.
Edited by: user649596 on Apr 13, 2010 11:49 PM

Should I disable the constraints and then run the drop index again?NO, certainly not !!
Ask SAP Support on what methods you should use to diagnose the "hang" and what your next step(s) should be.
Hemant K Chitale

Issues with a email server migration - URGENT HELP PLEASE

Hi,
My online company uses TB and we recently changed our email server provider to resolve a serious problem we were having with the previous one. Both servers (old and new) are IMAP.
The problem is that since we have made this server migration we are having a lot of strange things happening on TB such as:
1. When I mark a email read I can no longer mark it as unread. I've tried to click on the little ball, to select 'Mark as unread' by clicking on the right side of the mouse, etc and nothing!
2. When I reply and forward an email the reply and forward arrow is not showing up so sometimes we don't know what emails have been done
3. Sometimes the emails are sent and don't show up in the sent folder. So we need to put our own email in BCC to be sure that they have been answered.
The guy who organised the server migration suggested us to move to outlook, but outlook is not resolving the problem either. On top of that it makes our computers as slow as snails. I'm on a free trial with outlook that will expire in two days and I want to go back to TB as I find it much easier and straight forward.
Has anyone have a similar issue? Can someone HELP please?
Many thanks in advance.

item 2 see screenshots
No clue on other issues Just remember that your old e-mails are not on your new server.

Firewire Port not working, URGENT help please¡¡¡

Hello People, i´ve just got a new Mac Mini last week, and i´ve been trying to get my Alesis MasterControl audio interface, and is just a complete mess.
This happened right after i´ve upgraded to 10.8.3 so i don´t know, the weird thing is that if i connect my old iBook to the Mac Mini the FW800 port works, but everytime i connect the audio interface, nothing happens, also the drivers from alesis, are up to date. i first thought about the port of the Mixer went bad, but it has 2 and non of them works, also thought about the cable but the same cable works when i connect my iBook, and the mixer is not bus powered, it has it´s own power supply.
Needless to say i´ve already done the usual reset PRAM, turn of the Mac unplugged for 30 hour to reset the bus. etc.
This is the usual firewire only system log that i get:
31/03/13 08:01:20.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in now active, GUID 003ee1fffe88dc6a; max speed s800.
31/03/13 08:01:30.000 kernel[0]: Alesis Firewire - 3.5.6.11675 (x86_64) Aug 16 2011 01:20:23
31/03/13 11:33:23.529 system_profiler[528]: SPFWR ERROR: FireWire bus may be unstable. Other FireWire devices may be present.
31/03/13 11:35:43.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: no valid selfIDs for more than 3 minutes after bus reset.
31/03/13 11:38:55.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: no valid selfIDs for more than 3 minutes after bus reset.
31/03/13 11:42:08.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: no valid selfIDs for more than 3 minutes after bus reset.
31/03/13 11:44:39.124 CleanMyMacHelperTool[583]: Mounted devices (
    "/Volumes/AlesisFirewire-3.5.3.8671"
31/03/13 11:44:39.146 CleanMyMacHelperTool[583]: Wont clean /Volumes/AlesisFirewire-3.5.3.8671 because disk image
31/03/13 11:44:39.148 CleanMyMacHelperTool[583]: Mounted devices (
    "/Volumes/AlesisFirewire-3.5.3.8671"
31/03/13 11:44:39.149 CleanMyMacHelperTool[583]: Wont clean /Volumes/AlesisFirewire-3.5.3.8671 because disk image
31/03/13 11:44:52.727 coreservicesd[62]: Application App:"AlesisFirewireUninstaller" [ 0x0/0x7f07f] @ 0x0x7fb5c8c30050 tried to be brought forward, but isn't in fPermittedFrontASNs ( ( ASN:0x0-0x80080:) ), so denying.
31/03/13 11:44:52.727 WindowServer[85]: [cps/setfront] Failed setting the front application to AlesisFirewireUninstaller, psn 0x0-0x7f07f, securitySessionID=0x186a5, err=-13066
31/03/13 11:47:28.533 CleanMyMacHelperTool[656]: Mounted devices (
    "/Volumes/AlesisFirewire-3.5.3.8671",
    "/Volumes/AlesisFirewire-3.5.6.11675"
31/03/13 11:47:28.544 CleanMyMacHelperTool[656]: Mounted devices (
    "/Volumes/AlesisFirewire-3.5.3.8671",
    "/Volumes/AlesisFirewire-3.5.6.11675"
31/03/13 11:49:26.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: no valid selfIDs for more than 3 minutes after bus reset.
31/03/13 11:52:39.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: no valid selfIDs for more than 3 minutes after bus reset.
31/03/13 11:57:22.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in now active, GUID 003ee1fffe88dc6a; max speed s800.
31/03/13 11:57:34.000 kernel[0]: Alesis Firewire - 3.5.3.8671 preliminary - x86_64 CJ - May 3 2010 02:43:28
31/03/13 11:58:36.982 com.apple.launchd.peruser.501[155]: ([0x0-0x1d01d].tc.tctechnologies.AlesisFirewire.controlpanel[238]) Job appears to have crashed: Abort trap: 6
31/03/13 11:58:37.252 ReportCrash[242]: Saved crash report for AlesisFirewire Control Panel[238] version 3.5.3 (3.5.3.8671) to /Users/m1kygarcia/Library/Logs/DiagnosticReports/AlesisFirewire Control Panel_2013-03-31-115837_Mac-mini-de-Miguel.crash
31/03/13 11:58:39.831 system_profiler[267]: SPFWR ERROR: FireWire bus may be unstable. Other FireWire devices may be present.
31/03/13 11:58:50.676 com.apple.launchd.peruser.501[155]: ([0x0-0x23023].tc.tctechnologies.AlesisFirewire.controlpanel[274]) Job appears to have crashed: Abort trap: 6
31/03/13 11:58:50.837 ReportCrash[242]: Saved crash report for AlesisFirewire Control Panel[274] version 3.5.3 (3.5.3.8671) to /Users/m1kygarcia/Library/Logs/DiagnosticReports/AlesisFirewire Control Panel_2013-03-31-115850_Mac-mini-de-Miguel.crash
31/03/13 11:58:53.638 system_profiler[277]: SPFWR ERROR: FireWire bus may be unstable. Other FireWire devices may be present.
31/03/13 11:59:09.747 CleanMyMacHelperTool[300]: Mounted devices (
    "/Volumes/AlesisFirewire-3.5.6.11675"
31/03/13 11:59:09.905 CleanMyMacHelperTool[300]: Wont clean /Volumes/AlesisFirewire-3.5.6.11675 because disk image
31/03/13 11:59:09.906 CleanMyMacHelperTool[300]: Mounted devices (
    "/Volumes/AlesisFirewire-3.5.6.11675"
31/03/13 11:59:09.907 CleanMyMacHelperTool[300]: Wont clean /Volumes/AlesisFirewire-3.5.6.11675 because disk image
31/03/13 12:00:47.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in now active, GUID 003ee1fffe88dc6a; max speed s800.
31/03/13 12:00:59.000 kernel[0]: Alesis Firewire - 3.5.6.11675 (x86_64) Aug 16 2011 01:20:23
31/03/13 12:01:56.720 system_profiler[269]: SPFWR ERROR: FireWire bus may be unstable. Other FireWire devices may be present.
31/03/13 12:05:40.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: no valid selfIDs for more than 3 minutes after bus reset.
31/03/13 12:08:52.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: no valid selfIDs for more than 3 minutes after bus reset.
31/03/13 12:12:42.277 AlesisFirewire Control Panel[245]: -_continuousScroll is deprecated for NSScrollWheel. Please use -hasPreciseScrollingDeltas.
31/03/13 12:12:42.277 AlesisFirewire Control Panel[245]: -deviceDeltaX is deprecated for NSScrollWheel. Please use -scrollingDeltaX.
31/03/13 12:12:42.278 AlesisFirewire Control Panel[245]: -deviceDeltaY is deprecated for NSScrollWheel. Please use -scrollingDeltaY.
31/03/13 12:13:53.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: no valid selfIDs for more than 3 minutes after bus reset.
31/03/13 12:25:29.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in now active, GUID 003ee1fffe88dc6a; max speed s800.
31/03/13 12:25:38.000 kernel[0]: Alesis Firewire - 3.5.6.11675 (x86_64) Aug 16 2011 01:20:23
31/03/13 12:28:30.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: no valid selfIDs for more than 3 minutes after bus reset.
31/03/13 12:28:33.906 system_profiler[273]: SPFWR ERROR: FireWire bus may be unstable. Other FireWire devices may be present.
31/03/13 12:31:41.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: no valid selfIDs for more than 3 minutes after bus reset.
31/03/13 12:35:16.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in now active, GUID 003ee1fffe88dc6a; max speed s800.
31/03/13 12:35:26.000 kernel[0]: Alesis Firewire - 3.5.6.11675 (x86_64) Aug 16 2011 01:20:23
31/03/13 12:37:53.513 system_profiler[266]: SPFWR ERROR: FireWire bus may be unstable. Other FireWire devices may be present.
31/03/13 12:39:36.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in now active, GUID 003ee1fffe88dc6a; max speed s800.
31/03/13 12:39:49.000 kernel[0]: Alesis Firewire - 3.5.6.11675 (x86_64) Aug 16 2011 01:20:23
31/03/13 12:42:55.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: 53 bus resets in last 3 minutes.
31/03/13 12:46:50.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: 68 bus resets in last 3 minutes.
31/03/13 13:01:30.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in now active, GUID 003ee1fffe88dc6a; max speed s800.
31/03/13 13:01:41.000 kernel[0]: Alesis Firewire - 3.5.6.11675 (x86_64) Aug 16 2011 01:20:23
31/03/13 13:05:27.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: 79 bus resets in last 3 minutes.
31/03/13 13:06:31.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: no valid selfIDs for more than 3 minutes after bus reset.
31/03/13 13:09:43.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: no valid selfIDs for more than 3 minutes after bus reset.
31/03/13 13:13:31.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in now active, GUID 003ee1fffe88dc6a; max speed s800.
31/03/13 13:13:45.006 com.apple.kextd[11]: Can't load /System/Library/Extensions/IOFireWireIP.kext - ineligible during safe boot.
31/03/13 13:13:45.008 com.apple.kextd[11]: Load com.apple.iokit.IOFireWireIP failed; removing personalities from kernel.
31/03/13 13:13:54.818 com.apple.kextd[11]: Can't load /System/Library/Extensions/AlesisFirewire.kext - ineligible during safe boot.
31/03/13 13:13:54.823 com.apple.kextd[11]: Load tc.tctechnologies.driver.AlesisFirewire failed; removing personalities from kernel.
31/03/13 13:13:56.372 com.apple.kextd[11]: Can't load /System/Library/Extensions/AlesisFirewire.kext - ineligible during safe boot.
31/03/13 13:13:56.375 com.apple.kextd[11]: Load tc.tctechnologies.driver.AlesisFirewire failed; removing personalities from kernel.
31/03/13 13:15:40.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: no valid selfIDs for more than 3 minutes after bus reset.
31/03/13 13:18:46.763 com.apple.kextd[11]: Can't load /System/Library/Extensions/IOFireWireIP.kext - ineligible during safe boot.
31/03/13 13:18:46.768 com.apple.kextd[11]: Load com.apple.iokit.IOFireWireIP failed; removing personalities from kernel.
31/03/13 13:18:46.797 com.apple.kextd[11]: Can't load /System/Library/Extensions/AlesisFirewire.kext - ineligible during safe boot.
31/03/13 13:18:46.800 com.apple.kextd[11]: Load tc.tctechnologies.driver.AlesisFirewire failed; removing personalities from kernel.
31/03/13 13:18:50.775 system_profiler[221]: SPFWR ERROR: FireWire bus may be unstable. Other FireWire devices may be present.
31/03/13 13:18:52.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: no valid selfIDs for more than 3 minutes after bus reset.
31/03/13 13:21:03.488 system_profiler[235]: SPFWR ERROR: FireWire bus may be unstable. Other FireWire devices may be present.
31/03/13 13:22:37.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: no valid selfIDs for more than 3 minutes after bus reset.
31/03/13 13:24:07.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in now active, GUID 003ee1fffe88dc6a; max speed s800.
31/03/13 13:24:19.000 kernel[0]: Alesis Firewire - 3.5.6.11675 (x86_64) Aug 16 2011 01:20:23
31/03/13 13:31:00.926 system_profiler[316]: SPFWR ERROR: FireWire bus may be unstable. Other FireWire devices may be present.
31/03/13 13:33:03.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: 134 bus resets in last 3 minutes.
31/03/13 13:35:11.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: no valid selfIDs for more than 3 minutes after bus reset.
31/03/13 13:38:24.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: no valid selfIDs for more than 3 minutes after bus reset.
31/03/13 13:41:36.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: no valid selfIDs for more than 3 minutes after bus reset.
31/03/13 13:44:48.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: no valid selfIDs for more than 3 minutes after bus reset.
31/03/13 13:58:13.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: no valid selfIDs for more than 3 minutes after bus reset.
31/03/13 14:01:25.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: no valid selfIDs for more than 3 minutes after bus reset.
Can somebody help, please i´d gladly appreciate it.

I have this
System Profiler[170]
SPFWR ERROR: FireWire bus may be unstable. Other FireWire devices may be present.
& this
kernel FireWire (OHCI) Lucent ID 5901 built-in: no valid selfIDs for more than 3 minutes after bus reset.
Pls, help!!

Need Urgent help please? I need to restore from a previous iphone backup.

Oops, I admit it - I messed up but need help please?? I received a replacement iphone today. My broken iphone OS and my itunes had the latest software updates and I did a full backup before going to the store to get the rerplacement. However, when I got home with the replacement iphone and plugged it in, it asked if I wanted to update the OS on it. I made the mistake of saying yes. It then made a backup of the empty factory settings from the new replacement and restored from that rahter than the backup I made before going to the store. Yes I know I should have said no and just did the restore which would have resotred my previous backup that I made before going to the store. Then after everything would be allright I could have told it to update the OS.
You can slap my in the face or I will do it myslef for making such a stupid mistake. All ready did the "I should have had a V" thing to my forehead.
After seeing the restore was fromthe factory settings rather than my earlier good backup, I went into my documents and drilled down to the mobile sync backup and saw that one of the three folders (with giberish as a title) has a lot of information with the date and time I did the backup before going to the store.
Could I possibly delete the later (factory setting backup) folder and then do a restore to get my good backup onto the iphone? I didn't do that yet in fear that it might mess something else up on the iphone and I wanted to check with you experts here first for guidance and assistance, PLEASE?
I'll be anxiously awaiting any help you can give!
Thank you!!

rwmac22 wrote:
Hopt and OneOrangeTree, Thank you both very much for replying!!
It took me a long time to get back to the dissucison group because I tried both of your suggestions which therfore had to do about 4 restores. They take quite a while (about 50 minutes each actually). Your help got me half way there and is very apprecaited! I did manage (with your excellent help) to get most of my backup put onto the replaced iphone. the photos, music, and videos didn't get put over. I think I can move those back over by making sure they are selected in the seperate tabbed screens for the iphone. However, I can't get to those screens because every time I connect the iphone now, it brings up the "set up your phone screen". The one with the "an iphone has been previously synced with this compter" setup as new phone or restore from ....
Well I did the resotre from 3 times and that page still comes up when I plug in the iphone. Yes, I did close itunes, reboot the PC, and powered off the iphone and then brouhgt it back up before connecting (all several times), but itunes still takes me to the same "setup iphone screen".
Can you help me to get it to the standard iphone screen and there I will make sure the selected items are checked and do a sync.
Please know I do appreicate your kind assistance so far and hope someone can get me the rest of the way!
The "Backup" do not store your Applications, Music, Video's. It saves your settings, your application preferences, etc.

Urgent help please with MIDI pedal

I just got an old awesome midi pedal called the X-15 Ultrafoot.
The pedal has two expression pedals, and 10 pushbuttons/pads. (and two buttons to cycle through additional banks, and a "mode" and "bypass" button)
Somebody please help I am on the verge to having amazing control.
What I want to do is have each pushbutton be assigned to a parameter, which is easy to program. Then I want to make the expression pedal(s) also be assigned to that last selected parameter. How do I do this?
How can I make the expression pedals control over the parameter remain exclusive to just the last selected parameter?!
Somebody save me please thanks

mr kglad i really hope my ( too many replies and questions ) don't bother you.. but please excuse me if they sound foolish or something im a beginner as mentioned...
There must be something wrong with whatever im doing ... ( im so desperate and since you are the only one who replied on me i really need your help please.. )
1- i published the first fla as a swf (10.3 ) with a button with the code you've given me )
2- i published the second fla as a swf (10.3) with another button with the same code you've given me )
3- i made a main page where there are two buttons.. one for english and one for foreign language
English button with this code :
Engbutton.addEventListener(MouseEvent.CLICK, fl_ClickToLoadUnloadSWF_4);
import fl.display.ProLoader;
var fl_ProLoader_4:ProLoader;
//This variable keeps track of whether you want to load or unload the SWF
var fl_ToLoad_4:Boolean = true;
function fl_ClickToLoadUnloadSWF_4(event:MouseEvent):void
    if(fl_ToLoad_4)
        fl_ProLoader_4 = new ProLoader();
        fl_ProLoader_4.load(new URLRequest("englishformFIN.swf"));
        addChild(fl_ProLoader_4);
    else
        fl_ProLoader_4.unload();
        removeChild(fl_ProLoader_4);
        fl_ProLoader_4 = null;
    // Toggle whether you want to load or unload the SWF
    fl_ToLoad_4 = !fl_ToLoad_4;
and the other button with the same code ( the second fla )
IT DOESNT WORK WHEN I TEST THE MOVIE.. the return buttons nor the main ones..why why why why why... ???
i really need your help
THANK YOU in advance

Urgent help please -Reload Freehand

I have been using Freehand 10.4.9 for yars (sad maybe, bug it works and I love it) but all of a sudden it won't work properly. I create a document and send it to print. It downloads, then just quits. The job still prints, but I have to relaunch the program before I can use it again. Also, the document does not appear under 'open recent' .
So I thought - reload the software. Trouble is all my software is in the form of an upgrade (I have upgraded since V1). So, do I just reload the last upgrade (Freehand MX) and thats it, or do I have to do something else. I really can't remember what I did last time (2005)!
I don't want to totally unpick what I have got at the moment, even though it is not working properly, until I have finished the job I am working on. Help please will be much appreciated.

Dear Maeric
Good morning - I did as you suggested - uninstalled Freehand MX. My box said
'you must own version 9 before using this upgrade. Fine, so - Reloaded
Version 9 (in Classic). Got the message 'installation successful'.
Then went to use my upgrade to load Freehand MX. I get the request to enter
my name and registration nos. I enter the details, but only the cancel
button is active. I can't proceed. So now I am totally up a gum tree. What
to do next? Can you ask Judy and let me know what to do.
The only thing I can do is recreate all the work in the dreaded AI program,
or in InD which are totally clunky and so slow for what I want to do! Please
help.
Nearly desperate -
Fran

URGENT HELP PLEASE.....IDVD PROBLEM

Similar Messages

Maybe you are looking for