Urgent help pls - an authenticate codes

hi every1 can u pls help me. i need a jsp program where it authenticates the mem_ID and password which is in the login table in the database. if valid then will forward to the login.jsp or else index.jsp
thanks for helping.

Hi, found it but seems to be slightly messed up now :-/
http://www.kjkoster.org/java/content/packages.jsp
Maybe you can just ignore the user comments in between the different parts (they are a bit out of control) and make sense of it, the actual tutorial is good for what you wanted...

Similar Messages

I moved from an old macbook to a new one. I copied all my files onto a hard drive. On trying to setup my mail, i went into documents, microsoft user identities, office 2011 and it shows the database but wont let me select it. Urgent help pls

I moved from an old macbook to a new one. I have installed Office for Mac 2011. I copied all my files from my old notebook onto a hard drive. On trying to setup my mail, i went into my hard drive and accessed microsoft user identities, office 2011 and it shows the database but wont let me select it. Its almost as if the file is there but not accessable. I desperately need to access my old mail. How do I do this? I am fairly confident that I copied all files off my old notebook. Is there a way for me to search for the Database file? Maybe I copied it to a different location? Urgent help please.

Hello mafrerichs and welcome to Apple Support Communities,
Simplest way is to use Target Disk mode:
How to use and troubleshoot FireWire target disk mode - Apple Support
and hook to another Mac and use CCC or SuperDuper and clone your HD to another drive.
You could also pull the drive out of your MBP and use an external USB case or SATA - USB dongle to hook it to another Mac.
"MacBook Pro (15-inch Late 2011),... have a 15" 2012 Macbook pro with 2gb of ram, i7 processor"
That's a little confusing?

Error in Picking List (T-Code - CO27) - Urgent help pls

Hi all,
Situation-
   A work order has been released & the item for it has been made available using the picking list (CO27). However when i check the picking list again, the same item is still showing, but the Open Qty & Shortage fields show 0. I am not able to figure out how the item is still seen despite me picking it.
   When i select the line & click status, in the Business Processes tab, Release Component has a red indicator & says Error - BS 013 (System status REL is active), is this causing the problem & if yes how can i rectify it.
   Solutions please......

Hi Aaron,
Apologies for the delayed reply. I would like to inform you i am not a ABAPer so i dont know if what i did would be of benefit to you. But what actually had happened was the FI indicator was not ticked in the order & this was causing that error. This indicator i got to know is ticked automatically when the issual is done, but due to certain circumstances it might not be ticked, this happens due to some manual intervention is what i was made understood. I hope this was of some help to you. But i would say, it is better that u open a new thread & ask the experts for their view-point.
Regards,
Vivek

Error in Installation of SAP R/3 4.7 - Urgent Help Pls !!!

Hi All,
I have a problem while installing SAP R/3 4.7. The Central instance has been successfully installed. Error occurred while installing the database instance. I am using SAPDB as the database. The error I get is the following:
**INFO 2008-03-01 14:15:57**
**Processing of host operation t_HostInfo_SHARED succeeded.**
**INFO 2008-03-01 14:16:07**
**The 'saploc' share exists at directory 'E:\usr\sap'. Choosing drive E: as SAP System drive.**
**INFO[E] 2008-03-01 14:16:56**
**Account group="ORA_GOK_DBA" does not exist. <#1>**
**INFO[E] 2008-03-01 14:17:05**
**Account group="ORA_GOK_OPER" does not exist. <#1>**
**INFO[E] 2008-03-01 14:17:23**
**Account group="SAPSRV\dbgokctl" does not exist. <#1>**
**INFO 2008-03-01 14:19:23**
**Copying file C:/SAP Dumps/Core Release SR1 Export_CD1_51019634/DB/ADA/DBSIZE.XML to: DBSIZE.XML.**
**INFO 2008-03-01 14:19:23**
**Creating file C:\SAPinst SAPDB SAPINST\DBSIZE.XML.**
**INFO 2008-03-01 14:19:23**
**Copying file system node C:\SAP Dumps\Core Release SR1 Export_CD1_51019634/DB/ADA/DBSIZE.XML with type NODE to DBSIZE.XML succeeded.**
**INFO 2008-03-01 14:19:23**
**Processing of all file system node operations of table tADA_Files succeeded.**
**WARNING 2008-03-01 14:19:24**
**Error 2 (The system cannot find the file specified.) in execution of a 'RegOpenKeyEx' function, line (274), with parameter (SOFTWARE\SAP\SAP DBTech).**
**ERROR 2008-03-01 14:19:24**
**MDB-07003 Exception occurred during Actor Call (Action READ_PROFILE_INFO).**
**ERROR 2008-03-01 14:19:24**
**MDB-07000 Execute Action READ_PROFILE_INFO failed.**
**ERROR 2008-03-01 14:20:47**
**MSC-01003 ESyException: ESAPinstException: error text undefined**
**ERROR 2008-03-01 14:20:47**
**FJS-00012 Error when executing script.**
**ERROR 2008-03-01 14:20:47**
**FCO-00011 The step fillR3loadPackageTable with step key SAPSYSTEM|ind|ind|ind|ind|ind|0|SAPComponent|ind|ind|ind|ind|ind|0|DatabaseLoad|ind|ind|ind|ind|ind|0|fillR3loadPackageTable executed with status ERROR.**
**ERROR 2008-03-01 14:20:47**
**FSL-02015 Node C:\SAP\DATA does not exist.**
Kindly let me know the solution to correct the error. Its urgent pls !!!
Regards,
Rose.

Hello,
The problem is caused due to the spaces in your directories
C:\SAP Dumps\Core Release SR1 Export_CD1_51019634/DB/ADA/DBSIZE.XML
Replace the spaces with underscores and restart the installation from from scratch.
Cheers
Bert

Open Orders...Urgent Help Pls

How can we retrieve open and non cancelled only sales order documents for a particular material...Pls Help me out

Hi mavreck,
From table VAPMA (Sales Index: Order Items by Material) check VBUK (Sales Document: Header Status and Administrative Data) and VBUP (Sales Document: Item Status)
Regards,
Clemens

Hi urgent help pls

pls i need help my blackberry keys has stopped working for 1 week now, took off the battery but it didnt help. cant do anything on the phone not even recieve calls, message or mail.pls what can i do without that it to a blakberry office

When you removed your battery, did you do it while your phone was turned on?
Cheers.
- If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated.

URGENT Help Pls - Absence type to be considered as Attendance in Time Eval

Hello Experts,
There is one specific absence type which has to be reported as absence in IT2001.
This abs type is something an EE works outside of office and need to be tracked as absence. And when the EE has scheduled to go out for work on this absence, there is an absence request form and approval process. Everything is in place.
But, since the EE is performing work on this absence, this absence type needs to be considered as attendance in Time Eval so that number of hrs work in a day gets added up. Plus, we have specific OT rules, it EE works more than 8 hrs and less than 10hrs in a day, he get 1.5 time rate in OT. And if he works more than 10hrs, he gets double OT. But if he works less than or equal to 40 hrs in the same week, he does not get OT.
Due to this complex OT calculation, the above absence type needs to be added or considered as regular working hrs so that the EE get OT accordingly.
Please reply me VERY URGENTLY. Somenone with helpful answer and/or suggession will be awarded points.
Thanks in advance

Hi Subodh,
Would you please send me those PCR's, i have a similar situation but with time, if he starts before 6am gets double time and after 6am he gets 1.5 times for overtime.
E-mail address:[email protected]
Thanks in advance
Prakash

Urgent help pls on WAD

Hi to all WAD gurus,
I am trying to create a web template for the client. The requirements they have include.
LEFT TOP they need a logo
RIGHT TOP they need Report run date, last infoprovider update date and page number #.
BOTTOM LEFT they need Report technical name, Query technical name, Infoprovider technical name and Environment: like Dev QA or Prod.
BOTTOM RIGHT they need Discalimer.
My question is can we do all this... cause some things look like they need to be populated by itself. Can some one help me in doing this, atleat an approach ASAP

It's possible.
You'll first have to design the layout of your template using either tables or CSS. Have your MIME objects(logo) available in the MIME repository. There are web items like "Text Elements" you can use to get things like last infoprovider update, query technical name etc. If you all else fails there are some javascript functions out there to get additional information you can't get with the standard web items...
Good Luck...
Please feel free to add some points to my pot...

Urgent help pls

hi.,
we have 11.5.10.2 instance on solaries 10( 64 bit)
WHEN WE RAISE REQUISITION -PO modules it is not saving system is hanging.

HI.,
Check if Custom Code is On. In case yes, turn it off and then try.
Check if Custom Code is On but same problem.
Check if the Requisition is getting saved in the database. Tables to check would be PO_REQUISITION_HEADERS_ALL and PO_REQUISITION_LINES_ALL.No its not saving
Just try entering a Requisition Header and save it. Does it work.No its not saving
Try creating the Requisition in some other OPerating Unit. Could be a setup issue which might be causing an unexpected code flow.I tried for the all operating unit but same problem.

Urgent help pls: SSL

Hi Experts,
I am new this concept of SSL.
I have a ejb sitting in a weblogic. I dont have user based authentication. But only from certain hosts, my ejb should be accessible.
I read lot of theoires about certificate, keystore, CA etc. But can any one please tell me how to do this practically.
What I assume is, I have to get the certificate of weblogic server and using keytool , i have to import in the client side.
After this when the client makes a call, server will seek whether it has the certificate and if so, allow. Am I right.
Please help me on this
Thanks and Regards,
Mukunt

Hi Experts,
Can you please give me the steps which I have to do to achieve this.
Your help would be very useful for us
Thanks and Regards,
Mukunt

Urgent help pls: certificate based authenticaion

Hi Experts,
I am new this concept of SSL.
I have a ejb sitting in a weblogic. I dont have user based authentication. But only from certain hosts, my ejb should be accessible.
I read lot of theoires about certificate, keystore, CA etc. But can any one please tell me how to do this practically.
What I assume is, I have to get the certificate of weblogic server and using keytool , i have to import in the client side.
After this when the client makes a call, server will seek whether it has the certificate and if so, allow. Am I right.
Please help me on this
Thanks and Regards,
Mukunt

Hi,
Thanks a lot..
This throws some light for me..As you had mentioned, I have to follow the first approach.
ie I have to store the server's details in the client's truststore.
Can you please let me know what are all the steps I will have to follow.
Since I don't have much clarity, I keep trying trial and error and failing.
Currently I am getting following error
<Apr 3, 2007 4:22:59 PM GMT+05:30> <Warning> <Security> <BEA-090504> <Certificat
e chain received from ISLCH-268 - 202.46.212.162 failed hostname veri
fication check. Certificate contained mukuntaraj k but check expected ISLCH-268>
Thanks and Regards,
Mukunt

Roadmap structure not visible - Urgent help pls...

Hello All,
I tried creating a custom roadmap with my own folder structure. I created it as all subfolders.
Once I am done with creation, I tried with RMMAIN transaction to view the same. But unfortunately I am not able to see the structure created by me.
I am sure that I am missing something with the 'Entry Screen' button of the RMAUTH transaction. But not able to figure out what it is. When I press the 'Entry Screeen' button, I am able to see all the folders I created for my Roadmap structure.
But the same is not visible in RMMAIN. Can anybody help me figuring out what I am missing and where I am missing?
Any input in this regard will be greatly appreciated. Thanks a lot in advance.
best regds,
Alagammai.

Without having to go into a lot of details on this - there are ample details on how to use these objects together to create a custom road-map. There can be a number of things wrong that are not being satisfied by the work you have done so far. You can access the guide in the http://service.sap.com/solutionmanager -> media library -> documentation -> 4.0 SP12 File. Goto the section on Creating RoadMaps - it can explain all the nuances better than I can. Personally I think that there is an issue with the flavor and how you have assigned your components such that when you created your project - there was nothing to display but go through the guide anyhow and see what might be the issue.
Remeber that you can always copy a RoadMap and then remove a bunch of stuff that you don't like - this is the typical method of doing business that I have seen that works pretty well. Making these from scratch can be a bit of a pain.

URGENT HELP PLS : Issue with Multi Level Master Detail block

This is an issue someone else had posted in this forum few years back but there was no solution mentioned, I have run into this same issue , The problem is as explained below.
Any help on this is appreciated.
Scenario:
There are 3 Blocks in the form : A (Master Block)
: B (Detail of A )
: C (Detail of B )
There is master detail relation created between A and B and B and C. So initially when we query for a record in Master A, it shows all records properly in B and C.
Now if i navigate to the first record of B , and then second record of B , records corresponding to that record shows up properly in C block.
Till now everything works fine.
Issue 1:
But in case after querying initially on Master Block A,If I go directly to the second record of B block, it clears the whole B block and C block.
Issue 2:
Same thing happens if I am on C block ( corresponding to second record of B block) and then navigate to first record in B block , it again clears the whole B block and C block.
Please Help !!
Thanks !

Thanks Xem for Your reply , I tried those settings but it did not help..here is the original link that to the thread that talks about the same problem ,
Issue with Multi Level Master Detail block
The last update to this was the following :
"I figured out that this is happening because Block Status is set to 'Changed' and this is causing it to clear out the blocks.
But cant figure out why the status is setting to 'Changed' "
Any Help from the form Gurus on this form in this matter is truely appreicated !!
Thanks,
Zid.

Flashing stuck at 13%, xperia Neo V [Urgent Help pls]

Hello guys, i had finally made up my mind to root my xperia neo V, i learnt that i have to "Downgrade to 0.42" version and then root my phone, so i downloaded .42 firmware and latest version of Flashtool i.e 0.9.1.0 , i did all steps correclty, checked all checkboxes correctly, at 13% that flashing is simply stuck, no messages nothing,
so i tried with another version of Flashtool, i,e 0.6.8.0, but that also went in Vain, same stuck at 13%, this is the log,
it gets stuck at system.sin,
i tried checking, 'Exclude System' and then flashed, then it gets flashed upto 100%, but while booting phone is stuck @ 'Sony Logo',
another thing i want to tell is, "Already when i bought this phone it had .62 version installed in it, no .42" , it this the reason for not successful flashing?
my phone is completely dead guys, please help me ASAP, pleading you all, please.
Solved!
Go to Solution.

Great
Here is how to root
{GUIDE} How to Root Xperia™ Smartphones
Yes you can use on rooted GB as well , but i don't have any information about how to use
Discussion guidelines.
Message me or any other moderator to seek help regarding moderation.

URGENT HELP PLS Updating latest software 2 iPod causes it2constantly reset

Connected my 5th Generation ipod to iTunes (latest version 7.5(19)) and was told new software available for ipod. Foolishly I said Yes. Ever since then been constantly resetting itself both when connected by USB and when not. Did the 5Rs but it is resetting anyway. Anyone know a fix for this please? Worried it's going to flatten battery. Shall I just leave connected to computer and let it reset ad infinitum till I can get to an Apple store?

Mine stopped resetting itself overnight. When I checked the battery icon it showed about 1/3 used. Because I was having trouble ejecting the iPod from iTunes I took it to a Apple Recognised dealer. He looked at laptop and saw I was running ClamXav a virus protector. Although I told it only to monitor my documents folder it appeared that it might be doing more than that. When told to stop I was able to eject iPod normally.
He did mention that a lot of the recent updates were due to introduction of Leopard and it was still having teething problems.

Urgent help pls - an authenticate codes

Similar Messages

Maybe you are looking for