Urgent Help - PR Overall Release not working

Hello Team... I have a problem and I cannot find what I forget to setup.
My Class ZBANF_GESAMT class type 032, its contain the following characteristics
ACCOUNT        ---> Account assignment category has the field CEBAN-KNTTP
PLANT             ---> Plant has the field CEBAN-WERKS
COSTCENTER ---> Cost Center has the field CEBAN-KOSTL
ORDER_TYPE ---> Order Type has the field CEBAN-USRC1
OVERALL_VALUE ---> Total Value of Requisition has the field CEBAN-GFWRT
ORDER_NR          ---> Ordern number AUFK-AUFNR
The Characteristic ITEM_VALUE was replaced with the new OVERALL_VALUE.
After changes these class work fine, but when chenge it to OVERALL_VALUE only works with account assigment K... not for the F conbined with ORDER_TYPE and/or ORDER_NR.
I defined the Release Group M1 as OverReqRel = TurnOn, and assigned my class ZBANF_GESAMT
Also Defined as Overall Release mu PR document types in txn OLME
And well define the release codes, release indicators and created the release strategy.
In CL24N I just filled the values for the class and all looks fine.
But when I create the requisition, send the message *"Purchase requisition 183260 not subject to a
release strategy"*
What I forget !!! ?? Some have an idea??

Yeap,
I have set overalrelease to all my PR types also
And still not working, requisitions are not subject to release.
This combination works:
Account Assignment Category        K
Plant                                     7601 - SSM
Cost Center                     0000112003
Cost Center                     0000112070
Cost Center                     0000112090
Cost Center                     0000112091
Order Type
Total value of requisition for     0.01 - 2000.00 USD
Order Number
But this one not:
Account Assignment Category     F
Plant                                    7601 - SSM
Cost Center                    0000500620
Order Type                     MCDF
Total value of requisition for     0.01 - 5000.00 USD
Order Number                     P-TOYOTA
I review my requisition and all these condition are consider in the requisition.
What I can do?

Similar Messages

PR overall release not working

Dear SAP Gurus,
I have checked the following setting,
1.Document type (NB & FO) - Overall release activated
2.Characteristic (3) - ZRPLANT,ZRPURCHGRP,ZRDOCTYP
3.Class - ZRPRRELEASE
4.Release Group (P1) - Overall release activated
If i have deactivated the Overall release then the item wise release strategy is working well.
Kindly guide me and extend your help on this
Thanks in advance
Thanks and Regards,
R.Diwakar

In cl30, if you have provided all the entries, and still it is not being picked, then your characteristics are not assigned properly to your strategy - NO VALUES ARE UPDATED,I have forcibly provided it, is it ok
Did you reach the second screen after putting the class,how many characteristics were appearing, were they same as what you have setup?
1. spro-mm-purchasing-purchase re-releasestrategy-setup procedure with classification-release strategy, can u select your strategy and go to details and click on classification and get the class name.... it would come written above the tab called general - Class Name - PRRELEASE, I obtained the name also.
2. Go to the node called edit class, execute it , and provide your class, and click on characteristics tab., get all the characteristics names from there. - PRPLANT & PRPURGP
3. Go to Edit characteristics nodes and check them individually, the status of all characteristics should be released - ALL THE CHARACTERISTICS ARE RELEASED
Please check the values that are maintained for the characteristics? Is it the same as on the P.R?
4. Then check Groups, only one release call should be present there, please check whether overall release has been ticked or not. - OVERALL RELEASE BUTTON TICKED
How many Classes do you see in Release group setup?
Please check this and let me know.
Alternatively, you can check EBAN for fields FRGGR and FRGST, for the release group and strategy that you have setup - YES I AM ABLE TO VIEW THE FIELDS FRGGR and FRGST
If you find a P.R, create another one with reference to this and then check. - no OVERALL RELEASE NOT OCCURED
Are you saying, you found a P.R which was released earlier, and when you created a new P.R with this reference, the overall release did not occur?
Regards
Shailesh

Urgent Help! Flash Links not working on PC but fine on Mac??

I need urgent help as my client is expecting a fully working site this week and i can't seem to understand what the problem is with the site i created www.tuarard.ie. The links such as the link 'download current programme' which is on the splash page works fine on mac but not on pc. there are other various links throughout the the site as well which don't work on pc.
Could someone please help me fix this problem. i am guessing the flash in fine but that the html is causing the problems. i am a beginner in the world of html so i know very little about it.
any help would be greatly appreciated.
thanks,
Peter

I know this is hindsight, and likely more of an opinion-based answer, but except for the original dynamic "opening" of the flash homepage there wasn't anything I saw on the pages other than the scrolling photos at the top that required flash to accomplish. Flash is cool (I use it frequently for sections of a page - banner animations, etc.), but I've found it's often more trouble than it's worth unless every section of you site will feature something amazing or compelling to use it...
It's not search engine friendly (unless all of your text is linked externally, and even then limited), the correct player needs to be loaded on the viewer's machine to view, and it opens (generally) much slower than a standard html page...
Having said that - I think the site looks great - and fits the feel of the content, (and worked fine on the mac and windows browsers I tried here...)

Urgent help - MUSE email form not working - PLEASE HELP

HI to all!!
I'm having a big issue here with Adobe Muse cc 7.0
I have my personal domain www.shepherdtextiles.com
and third party host (here in China which is 72e.net (and yes, got all php and so on requirements Adobe Muse needs)
I follow carefully all steps to add a simple contact form, adding first [email protected] and changing it to my personal hotmail when I saw it wasn't working to try if with hotmail could work, but didn't.
I have checked the Muse PHP Diagnostics and as you can see the mail one failed.....
I used first the simple contact form that comes with Muse and later I used one from museresources.com but none of them seemed to work
I'm just guessing that something is not well setup on my server because I just follow all steps Adobe mentioned and I watched many videos where people do it very simple.
The error I get on my website when I click on submit button is "The server encountered an error"
There is NO error when I export to html or warnings, just exports fine.
PLEASE HELP
Many many thanks!
Vic

I'M having a similar problem with my Muse website Formally hosted by GoDaddy. The contact me widget does not send an email when you click submit button. Normally, it accepts with a green check mark in another screen. It does not do that. The submit just turns black when clicked, but nothing else happens
THe he regular email works. I am able to send and receive. It just does not work with the contact widget

URGENT HELP ! Search did not help !

*URGENT HELP ! Search did not help !*
I bought my new iPod classic three days ago and until yesterday it worked OK. Every time I plug iPod to my computer I get message "CONNECTED" and I hear that sound in Windows that is saying that something is connected, but almost amidiadly I get the message "EJECTING" and it ejects. I don't see anything in iTunes or My Computer and everything lasts for a few seconds. I reinstalled Windows, so I'm using a fresh copy without any bugs, well if you can call Windows bug free lol USB port to which I'm connecting iPod is 2.0...
I can't even see iPod in My Computer - Properties - Hardware - Device Manager.. And when I leave this windows on and then connect iPod I can see that "xx Apple iPod" appears for a few seconds...
I read that people had similar and same problems, but there is for instance no connected device in Device Menager for me to update and even Disk Mode does not work... I also did not read that someone solved this problem...
Scould I call them and ask them to get another one or what ?
PLEASE HELP ! And Thank You...
Message was edited by: Samael54

No I downloaded the fix, but it won't not even install.. I sow that that fix was replaced with a new one, so I subscribed to get that fix, but nothing so far, but I remember installing that fix yesterday and it did not help as well.. I will try to get it to some other computer and restore it without iTunes somehow, but I don't know if this is posible or if it does not work with my PC does not mean it will work on some other

F4 help for 0MAT_SALES is not working in BI 7

Hi Gurus,
The F4 help for 0MAT_SALES is not working when distibution channel is selected as (!=02) in Bex Analyzer. But for all other values for distibution channel i am getting values in F4 help.
Since 02 is excluded it is supposed to give values for all other combination. but it not so.
Could anyone of you please help me on this?
Thanks in advance.

Closing Thread

Help! limewire will not work on my Mac mini 10.4.11 now that i cleaned it

Help! LimeWire will not work on my Mac mini 10.4.11 now that i cleaned it out and had to get the new LimeWire. It keeps asking for Java 1.6 but I'm having no luck. :O( LimeWire was the reason I bought a Mac!

Very weird day in Firefoxland
First on a Powerbook G4 running 10.4.11 I respond to an invitation to upgrade to Firefox 4 (like a lot of others). Long story short, I wind up losing the browser altogether -- including all bookmarks. Why? Because neither the Firefox homepage (or CNET downloads) makes it clear that 4.0 is for OS 10.5 only! Amazing!
Then I try to register to post a reply in a thread that crits Firefox for not making this System Requirements info upfront clear. But the Register page I’m taken to (https://support.mozilla.com/bs/users/register) is in SERBO-CROATIAN!!
Then I try to log into Chat a couple of times and when it’s not CLOSED its a long line waiting and THEN it closes.
WOW!! Are the wheels off the wagon here or what!?!

HT201272 I need a refund on my books I purchased from itunes because my ipod will not support them. I was on the apple chat last night and they tried to help but it did not work and they told me my ipod was to old to support them. I was wondering how do I

I need a refund on my books I purchased from itunes because my ipod will not support them. I was on the apple chat last night and they tried to help but it did not work and they told me my ipod was to old to support them. I was wondering how do I get the refund on them?

Try the 'report a problem' page to contact iTunes Support : http://reportaproblem.apple.com
If the 'report a problem' link doesn't work then you can try contacting iTunes support via this page : http://www.apple.com/support/itunes/contact/- click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

Hi can you help the sound is not working on my Mac I have went into settings and there are no option for interal speaker help

Hi can you help the sound is not working on my Mac I have went into settings and there are no option for interal speaker help

Read the documentation at the links. They won't hurt your data.
Basically smc reset is shutdown, pull your plug for 15 seconds, plug it back in, wait 5 seconds, and reboot. Harmless to you. Resets the smc.
Pram reset is similar but you need to push commnd-option-P-R after the boot chime. Read what does.
smc and pram reset

Plz help me my facetime not working and no have facetime app

plz help me my facetime not working and no have facetime app

In what way is it not working?
Which iPhone do you have?
Which iOS version?
Where did you purchase your iPhone?
Any info at all about your issue?

I can buy my needs from the game says I tell customers to help please help me Visa card not working in any Itemes games

I can buy my needs from the game says I tell customers to help please help me Visa card not working in any Itemes
games

If you mean that you have been instructed to contact iTunes support, then will need to do what it says, contact iTunes Support. These are user-to-user support forums, if you thought you were contacting Apple by posting here. Go here:
http://www.apple.com/emea/support/itunes/contact.html
to contact the iTunes Store.
If that does not answer your question, try posting in your native language, or find a friend with a better command of English to help you ask your question here.
Regards.

Search help of material is not working in ECC 6.0 : Urgent

Hi Friends,
I am using ECC 6.0. I have a problem in search help of material by plant. In the search help of material (choosing the tab plant material by descriptions), if i give any plant which is 3 chars long (exp. ABC) it is giving correct combination of plant material. But if i am giving a plant which is 4 chars long (exp ABCD) it firing a message saying no values found, although the combination exist. (if i am giving only material name it is showing both 3 chars and 4 chars long plant).
for ref: please use transaction MD04 and press f4 in material field and choose tab "plant material by descriptions", and give 3 chars and 4 chars long plant.
please help me to trace the problem or any OSS note.
correct answer will be awarded.
I will appreciate to not giving code of search helps because it is a standard SAP functionality that is not working.
Regards
Krishnendu

Krishnendu,
Please check your SAPGui frontend i think you are using 7.10 patch level 3.? if not try with some other system that have 7.10 patch level 3.
a®

Urgent: OSB FTP polling is not working, help!!!

hi all,
I am doing an onsite poc on customer site, and configuring and proxy service on OSB(11.1.1.5) using ftp , but it just not working, not picking files in the specified folder, no error message. seems it can connect and login, but just not picking the files, though I set the mask to *.*, poll interval 3 seconds. any tricky? someone can help?
I've read all the documents abt ftp transport, and I can configure file proxy, ftp business service successfully.
thank you very much in advanced.

no log still, for DEBUG.
error will throw in log only if I set the wrong user/password.
seems it connected to the ftp server, but just not picking the files there. I don't know why. I doubted it's the problem of the path setting, but it's the same for phsical path and relative path. not working.
help...........

My mic is not working please help, my mic is not working please help

my mic is broken i think at first i thaught it was cloged so i put a pin in it but it still would not work . i did get water on my ipod 5 but i dont understand why it only affected my mic intead of anything else please help me anyone

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem. Ither the water damaged the mic or the pin did.
Apple Retail Store - Genius Bar

Help for date field not working after upgrade

hi experts,
In our BSP application for a page we had an inputfield (date).
Onvaluehelp for input field we were calling the saphelpdate function.
however after upgrade this functionality is not working properly as no pop up comes after clicking on the icon.
we have upgraded to SPS 16 recently.
please help me.
regards,
Arvind.

Hi, I try upper case but nothing happen. This is all my code by far, I hope you can help me:
DATA: BEGIN OF T_PCONT OCCURS 0,
      PCONT LIKE ZPSPERMISOS-PSOBKEY,
END OF T_PCONT.
DATA: BEGIN OF T_FIELDS OCCURS 0.
        INCLUDE STRUCTURE help_value.
DATA END OF T_FIELDS.
DATA: BEGIN OF T_VALUES OCCURS 0,
      VALUE(60) TYPE c.
DATA: END OF T_VALUES.
DATA: N TYPE i.
SELECTION-SCREEN BEGIN OF BLOCK b20 WITH FRAME TITLE text-b02.
SELECT-OPTIONS:
    P_CONT FOR ZPSPERMISOSH-PSOBKEY OBLIGATORY NO-EXTENSION NO INTERVALS,
    P_INT FOR ZPSPERMISOSH-PARTNER OBLIGATORY NO-EXTENSION NO INTERVALS,
    P_FEC FOR ZPSPERMISOSH-ZFINICN NO-EXTENSION NO INTERVALS,
    P_RAZ FOR ZPSPERMISOSH-ZRAZONFINIC NO-EXTENSION NO INTERVALS.
SELECTION-SCREEN END OF BLOCK b20.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_CONT-LOW.
PERFORM P_HELP_P_CONT USING P_CONT-LOW.
*&      Form P_HELP_P_CONT
FORM P_HELP_P_CONT USING P_P_CONT.
DESCRIBE TABLE T_PCONT LINES N.
IF N EQ 0.
    T_FIELDS-FIELDNAME = 'PSOBKEY'.
    T_FIELDS-TABNAME    = 'ZPSPERMISOS'.
    T_FIELDS-SELECTFLAG = 'X'.
    APPEND T_FIELDS.
    CLEAR T_FIELDS.
    SELECT PSOBKEY FROM ZPSPERMISOS
    INTO TABLE T_PCONT.
    SORT T_PCONT BY PCONT.
CALL FUNCTION 'HELP_VALUES_GET_WITH_TABLE'
    EXPORTING
      CUCOL        = 10
      CUROW        = 1
      TABNAME      = 'T_PCONT'
      FIELDNAME    = 'PCONT'
    IMPORTING
      SELECT_VALUE = P_P_CONT
    TABLES
      FIELDS       = T_FIELDS
      VALUETAB     = T_VALUES.
ENDFORM.                    " P_HELP_P_CONT
Edited by: J. Garibaldi on Nov 25, 2009 11:14 AM
Edited by: J. Garibaldi on Nov 25, 2009 11:16 AM

Urgent Help - PR Overall Release not working

Similar Messages

Maybe you are looking for