Urgent help regarding process chain error

hi experts ,,
one of the process chain is not running properly for last 5 days ....
now current status of process chain is red ...and msg is last delta isrunning/has errors ..couldnt process request
msg of yester days chain ........
Errors have been reported in Business Information Warehouse during IDoc update:
Could not find code page for receiving system
error msg in bd87 (with idoc status 02 )
tried to process idoc manually but it didnt happen ...throughing same error....
one more thing here is same process chain status on 16th is in yellow status .....
its in yellow status at dtp load step ....on right click on dtp_load variant --->in batch montior --->job overview
dtp_laod job was is ready status ....
i thought this status effecting others so tried to schedule the job couldnt ....
so deleted job in confession....
now and process which is bfr dtp_load is in yellow and whole chain is in yellow ....
what shall i do now ??how to correct this ??
shall run dtp manually and dso activation manually ???and shall i make process into green status ???
or shall retrive deleted job wit basis ppl help???
please help me...
whoever helps me to fix this issue will rewarded wit full points and i will be greatful to them ...
Regars, \
Harry...

Yes, as rightly said you need to run the previous delta before updating new records in the latest request. If possible de-schedule the chains for a while, delete the old deltas (assuming you are using flexible updates?) and try to repeat the loads manually & proceed to activate & schedule once the delta has finished processing. If you still think this is an issue related to idocs processing, you can do the re-processing, provided they do not create fresh batch of idocs in the source system. You can re-process the idocs both inbound & out bound using reports like RBDAGAIN (But again, use extreme caution on these!). Please refer the #scn wiki on http://goo.gl/njVLS for more information on the idocs. For reprocessing please check this http://goo.gl/8aAcz. Thanks.

Similar Messages

Need help regarding process chains

Hi all,
Can any one tell me how to create process chains,
i have to create the process chains for
controlling area
business area
plant
company code
material
pack size
brand
flavour
how do i select these things and where can i select these things please tell help me out
these are all attributes as well as texts
thanks in advance
sidhartha

Hello...
http://help.sap.com/saphelp_nw70/helpdata/en/87/13843b74f7be0fe10000000a114084/frameset.htm
I understand the help topics are difficult to find...
Some tips:
- use only local objects (create infopackages localy in the production client to build the process chains, so you don't have to transport them).
- the secret for good process chain is organization. Separate texts, attributes and transactional data in separated process chains. Use a "master" global process chain to call the sub-process chains.
- careful assure the necessary precedences. Make sure you load attribues and activate the master data before the transactional data.

Process chains:Errors Occured..

i have selected my info objects 0CRM_PROD in rsa1 and i entered CALL MONITOR FOR BI OBJECT and then i got a monitor screen in that succesfull(42) it says...in that i have selected 0PRODUCT > TODAY DATE>
I FOUND THAT CR1 LIENT 100
02:04:56 (4 From 4 Records)i entered twise on this and i got HEADER STATUS DETAILS tabs...
in above DETAILS tab
we got a red colour in
Process chains : Error Occured
MD : Business partner & Product
like this... can u please suggest me the resolution for this...
please help me in this regard , thanks

Hi -
Please check
1) Do you have any Red request
2) Did you run delta twice
Regards
Astoria

Step by Step documents for Process Chain Error Handling with Screen Shots

Hi
Is anybody having Step By Step Documents for Process Chain Error Handling with Screen Shots ?. Please forward it to me to my e-mail [email protected] . I will reward points to u immediately.
bye
Aamira Khan

Hi,
You can find lots of topic related to process chain issues in SDN.Please make a search in SDN.
https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_library&query=process+chain&adv=true&sdn_author_name=&sdn_updated_on_comparator=ge&sdn_updated_on=&sortby=cm_rnd_rankvalue
Regards.

Process chains errors

Hi,
Any one can plz send the process chain errors in BI.I am in support so plz give some process chain errors.
sekhar.
Bye.

Hello Sekhar,
Please find the links might be it can help you..
Re: Process chain error for infopackage
process chains errors
http://help.sap.com/saphelp_nw70/helpdata/en/d3/53e03b8235953ee10000000a114084/content.htm
Please search in SDN you find more help..
Thanks,
Geeta

What are the varoius type of process chain errors how we can solve them.

Hi,
I need to work with process chains maintainace , Can any body tell me what are the different type of process chain errors generelly we used to get ,how we can solve them . IF possible please provide me any document also so that i can solve my
abnormal problems for process chain errors.
Thanks in advance .

Hi,
1) Invalid characters while loading: When you are loading data then you may get some special characters like @#$%...e.t.c.then BW will throw an error like Invalid characters then you need to go through this RSKC transaction and enter all the Invalid chars and execute. It will store this data in RSALLOWEDCHAR table. Then reload the data. You won't get any error because now these are eligible chars done by RSKC.
2) IDOC Or TRFC Error: We can see the following error at u201CStatusu201D Screen:Sending packages from OLTP to BW lead to errorsDiagnosisNo IDocs could be sent to the SAP BW using RFC.System responseThere are IDocs in the source system ALE outbox that did not arrive in the ALE inbox of the SAP BW.Further analysis:Check the TRFC log.You can get to this log using the wizard or the menu path "Environment -> Transact. RFC -> In source system".Removing errors:If the TRFC is incorrect, check whether the source system is completely connected to the SAP BW. Check especially the authorizations of the background user in the source system.Action to be taken:If Source System connection is OK Reload the Data.
For more errors and solutions go thorugh the link below
http://indelasap.blogspot.com/2009/04/sap-bi-production-support-issues.html
Regards,
Marasa.

What are some of the process chain errors one comes across?

hi friends
What are some of the process chain errors one comes across?

Hello Kiran,
Here are some of the errors that come across...
-> Rollup not possible, no filled aggregates available
-> Error when starting the extraction program
-> The process step locked by another changerun
-> Info objet does not contain alpha confirming values
-> Errors due to non activated objects
-> Errors due to duplicate records
-> Errors due to locking
-> Problems because of connection problem between source and bw systems
-> Problems due to RFC
Hope this helps you
Cheers
SRS

Common Process chain errors

Hi friends,
Can u please explain cause of below errors in process chain and how to rectify the problem ?
1. Deadlock error.
2. Error in unit conversion
3.Error 1 in update
4.Processing no data
5.Caller 70 missing
6.Idoc not processed completely.
Thanks...
Bala

Hi,
/people/mona.kapur/blog/2008/01/14/process-chain-errors
Deadlock
http://help.sap.com/saphelp_nw04s/helpdata/en/2e/44934257a5c86ae10000000a155106/frameset.htm
Dead Locks
2. Error in unit conversion
\Units of measure
3.Error 1 in update
When Src file is already open or not accessible.
4.Processing no data
theres no data selected after extraction
5.Caller 70 missing
" This error normally occurs whenever BW encounters error and is not able to classify them. There could be multiple reasons for the same
1) Whenever we are loading the Master Data for the first time, it creates SIDs. If system is unable to create SIDs for the records in the Data packet, we can get this error message.
2) If the Indexes of the cube are not deleted, then it may happen that the system may give the caller 70 error.
3)Whenever we are trying to load the Transactional data which has master data as one of the Characteristics and the value does not exist in Master Data table we get this error. System can have difficultly in creating SIDs for the Master Data and also load the transactional data.
4) If ODS activation is taking place and at the same time there is another ODS activation running parallel then in that case it may happen that the system may classify the error as caller 70. As there were no processes free for that ODS Activation.
5) It also occurs whenever there is a Read/Write occurring in the Active Data Table of ODS. For example if activation is happening for an ODS and at the same time the data loading is also taking place to the same ODS, then system may classify the error as caller 70.
6) It is a system error which can be seen under
the Status tab in the Job Over View.
solution:
" If the Master Data is getting loaded for the first time then in that case we can reduce the Data Package size and load the Info Package. Processing sometimes is based on the size of Data Package. Hence we can reduce the data package size and then reload the data again. We can also try to split the data load into different data loads
If the error occurs in the cube load then we can try to delete the indexes of the cube and then reload the data again.
If we are trying to load the Transactional and Master Data together and this error occurs then we can reduce the size of the Data Package and try reloading, as system may be finding it difficult to create SIDs and load data at the same time. Or we can load the Master Data first and then load Tranactional Data
If the error is happening while ODS activation cause of no processes free, or available for processing the ODS activation, then we can define processes in the T Code RSCUSTA2.
If error is occurring due to Read/Write in ODS then we need to make changes in the schedule time of the data loading.
Once we are sure that the data has not been extracted completely, we can then go ahead and delete the red request from the manage tab in the InfoProvider. Re-trigger the InfoPackage again.
Monitor the load for successful completion, and complete the further loads if any in the Process Chain.
6.Idoc not processed completely.
Here the request remains yellow (in process) and with the same details (as seen in the details tab of the monitor) for an abnormally long time. Many-a-times, the port for communication is not open and re-starting the load helps. For long running jobs, it may not be advisable to restart the extraction
Contact the BASIS administrator to push the IDOC.
Thanks

Process chain error - urgent

Hi
we have a process chain based on Funda management.
we have the chain like start > load data(0PU_IS_PS_44 delta 0PU_IS_PS_42 delta>active data store data active data store data>AND>further processing further processing
Here on 10th 0PU_IS_PS_42 delta is displaying yellow.
and on 11th and 12th it is clear(i.e. every thing is greeen)
we are loading data from dso to cube.
when we check the data in cube on 10th it is not displaying data though the data mart symbol in dso mangae is displaying.
my doubt is how to make the request from yellow to green,and how to get the data of 10th date in to the cube.
I made the request red and repeat the process
but it is not done
please help me in this regard
Boss can any one who can help me pls
thanks in advance
sridath
Edited by: sridath on May 12, 2008 10:09 AM

Hi,
If you want to load the 10th data then you can do a selective load for that date. You have to go to your Infopackage/DTP in the Calday or any Date characteristic put a filter for 10th as date and load the data
Hope this solve Ur issue.
Rgs,
I.R.K

Plz help in process chains- urgent

Hi ,
Process chain failedat load IP. i want to rerun this PC . so i went to RSPC , activated and scheduled the chain , but when i went into log view , nothing i can see , but a message , no logs were found and in SM37 , i can see a job with BI_PROCESS_TRIGGER released ..
what might happend and how to resolve this?
pavan

Check the start variant of the process chain...
Does it say DIRECT SCHEDULING and START IMMEDIATELY ??
Good luck!

Process chain Error: This AND process is not waiting for event RSPROCESS

Hi All,
I am facing an error in the process chain in PRD.
Error message: This AND process is not waiting for event RSPROCESS.
We had a process chain which had two sub chains which run parallel and below of this we had AND process type and below of the AND process we had 4 more jobs.
Once the two subchains got successfully loaded, the and process should turn to green and further 4 jobs should start.
It is a daily load , it worked fine from past years,but suddenly the AND processtype is getting failed.The thing is in the two subchains if one got completed, the AND process process is not waiting for 2nd subchain to get completed.The AND process is turning to RED (status: cancelled) . I tried to repeat the AND process once after above 2 subchains loaded, but it didnt worked.
And i removed the existing AND process and created a new one and placed it in same place and activated and schedules again.but still it is getting failed with same error.
Thanks in advance,
Sai Chand.S

Hi,
If you did any transports related to that metachain we face similar kind of issues.
not only the AND process , we need to remove all the process before executing the AND process and create it again.
It helps you, you said your in production So you should take the proper approvals and do it.
Regards,
Yerrabelli.

Abap Program in Process chain error

Hi Experts,
In my process chain there is a program to download hierarchy data and then in next step it would
load data but when the process comes to this program the job is getting cancelled and log shows below msg
Process LOADING, variant ZPAK_123455 is not scheduled waiting for event RSPROCESS 123444444
Please advice
Thanks
Raga

Hi.........
Remove your process chain from scheduling using the option procesc chain --> Remove from schedule. Then check & activate the process chain. Save the process chain. Check & activate again and then schedule the process chain.
Not 100% sure of the cause. When we faced a similar issue, we tried to analyse the cause and found that this kind of error occurs when the process chain is descheduled by deleting the released background job & scheduled again.... and this is because some of the old jobs for some of the steps are not deleted & the links between the steps wait for the old jobs or events.
I would say it is always better to deschedule a chain using the 'Remove chain from schedule' option than deleting the background job.
Hope this helps you.........
Regards,
Debjani........

PROCESS CHAIN error "Incorrect start date"

hi sap gurus,
I have parent chain in that a newly created meta chain is creating problem.I am getting error in the process chains since two days i am not able to solve this.Can anybody try to help me.
error: Incorrect start date: 00.00.0000; Start time 00:00:00 RSM 847
After that the process chain is turning red,but when i manually execute the process chain its running properly.
Please help me its urgent.

hi gurus,
Its working fine now.
Solution:
first exchange the variant with the smae and then activate and run.After that it will work in the process chain.
Thanks a lot to every body,especially MOHAN KRISHNA,

Collection in source system ended-Process chain error

Hi friends,
I have got a PC which failed due to error : Collection in source system ended.
My flow of PC is .
start--
       --Load IP 1
      ---Load IP2
      _--load Ip 3
Load IP4
      ---Load Ip 5.
I got this error at IP2 and so my pc fail .
can i manually upload this IP2 and make the process chain OK?
what are the steps involved in rectifying this?
regards,
siddartha

First try to find out the reason for the load failure. Once you fix this, do a manual run of the infopackage and when successful you can continue with the rest of process chain.
Sometimes, it doesn't help to just set a request to green status in order to run the process chain from that step on to the end.
You need to set the failed request/step to green in the database as well as you need to raise the event that will force the process chain to run to the end from the next request/step on.
Therefore you need to open the messages of a failed step by right clicking on it and selecting 'display messages'.
In the opened popup click on the tab 'Chain'.
In a parallel session goto transaction se16 for table rspcprocesslog and display the entries with the following selections:
1. copy the variant from the popup to the variante of table rspcprocesslog
2. copy the instance from the popup to the instance of table rspcprocesslog
3. copy the start date from the popup to the batchdate of table rspcprocesslog
Press F8 to display the entries of table rspcprocesslog.
Now open another session and goto transaction se37. Enter RSPC_PROCESS_FINISH as the name of the function module and run the fm in test mode.
Now copy the entries of table rspcprocesslog to the input parameters of the function module like described as follows:
1. rspcprocesslog-log_id -> i_logid
2. rspcprocesslog-type -> i_type
3. rspcprocesslog-variante -> i_variant
4. rspcprocesslog-instance -> i_instance
5. enter 'G' for parameter i_state (sets the status to green).
Now press F8 to run the fm.
Now the actual process will be set to green and the following process in the chain will be started and the chain can run to the end.

Process chain error:Error in an arithmetic operation in record

Hi friends ,
Plz help me ehow to solve the error: Error in an arithmetic operation in record in process chains when loading IP.
Error in error messages s:
Record 1927 :Contents 1100.00 J from field PSWBT cannot be converted in type CURR -
Record 1927 :Contents 0.00 0 from field BDIF2 cannot be converted in type CURR
Record 1927 :Contents 0.00 0 from field FDWBT cannot be converted in type CURR -
what can i do ?
regards ,
Pavan

Hi pawan,
If you are loading data thru PSA, correct these values in the PSA and reload it again. Best solution would be to correct it in the source system also. If you see the record 1927 in your case has following values for the fields.
PSWBT - 1100.00 J
BDIF - 0.00 0
FDWBT - 0.00 0
You can see the spaces in between as well as the character 'J'.
Hence it is giving you this error.
Correct it in PSA and reload it.
it will go fine...
Regards.

Urgent help regarding process chain error

Similar Messages

Maybe you are looking for