URGENT HELP! Resetting OS

I've recently been handed down a MacBook Pro w/o its installation cds. I wanted to start fresh with it so I've used the cds (10.5.8) that came with my iMac (Intel Core 2 Duo) to reset everything in my new old Mac. The MacBook Pro says it can't install it, and now I have a completely blank MacBook. PLEASE HELP!!! I really need to be using it this weekend! I'm desperate and who gave me the MacBook has no idea where they might have left the installation softwares. (BTW, I used a forum here to guide me through the steps that lead me to this - it said to have the installation software, press c while restarting it, language, disk utility, erase and so on, which I followed exactly )

Purchase a Mac OS X 10.6 package, install that, phone Apple Support, and order replacement disks.
(59774)

Similar Messages

IPhone 4 reset itself, photos lost -URGENT HELP NEEDED

Hi there,
Urgent help needed!!
Tonight I was taking extremely important photos throughout an event on my iPhone 4, however, my iPhone 4 ran out of battery once I was near a charger I plugged it in and for some reason my iPhone had reset itself. Back up icloud options were from yesterday, but the photos that I was taking at the event are needed urgently. Is there any way possible I can recover the photos that were taken?
Thanks in advance!!!!

Slymm71 wrote:
just had similar problem got email from find my phone saying initiating full phone wipe this cannot be stopped ***? i own the phone from new and registerred in m name but wiped whilst i was using it !!!
See your other post...
https://discussions.apple.com/message/18876037#18876037

URGENT HELP NEEDED (Bios Settings Failed)

Hey Guys,
I am having problems with my MSI Board, and don't know what to do. I am very much a noob to BIOS/and modding so I apologize in advance. You guys helped me a few months ago getting everything up and running and all was great for months. Then last night I walked away from my PC for a while and when i came back a starting screen was on saying my OC Settings Failed to load, i tried other versions I saved and they all failed as well. I ended up loading failsafe options, and got the "double start" where the computer turns on, then instantly shuts off, then turns on again. This allowed me to load windows 7, which then started to "install updates". So i think while i was away Windows automatically updated and rebooted... but would that effect my BIOS settings?
As I said, I had my system running perfect for months no errors or crashes at all based on the Bios setting you guys help me with in this thread: https://forum-en.msi.com/index.php?topic=147854.0
However, last week I removed the heat sink and installed this cooler: http://www.newegg.com/Product/Product.aspx?Item=N82E16835181010&nm_mc=OTC-Froogle&cm_mmc=OTC-Froogle-_-Water+Cooling-_-Corsair-_-35181010
All I did was unhook everything from the MB, install the cooler, and then hook everything back up to the MB. The only thing I may have done wrong is not connect the SATA devices (my HDs and ROMS) back in the spots they were in originally. However after I installed the cooler, they system booted right up, and I haven’t had any problems with my system for the past two weeks. I also should note I didnt make any BIOS changes either after I installed the cooler. So I don’t know if I should have done something there. Yet, like I said the system has been fine for the past two weeks, no crashes or errors... it wasn’t until last night after Windows auto updated that this has begun.
The reason I need "URGENT HELP" is because of course I just a new job with deadlines due and so much video editing work I need to do. I would be fine leaving it on failsafe settings, and forgetting the OC setting all together if I new that would make the system stable. But considering its still doing the "double start" even in failsafe mode, im afraid if i start working my system will crash.
So I am begging anybody for any advice or help they could provide. I will provide my system info below. If anybody can guide me as to what settings I should set in BIOS i would appreciate it. Or perhaps there’s a BIOS update that I should use now that I have a cooler and not a heat sink? If you need any more information from me, just ask. I will be monitoring this thread all day, as I desperately need help.
MY SYSTEM:
Intel 980X chip running Win 7 64bit (with MSI BigBang xPower MB installed in my old Dell XPS 730X)
(1) SATA II WD 3gb Hard Drive @ 1.5TB
(2) OCZ SATA II SSD drives @120GB: http://www.newegg.com/Product/Product.aspx?Item=N82E16820227543
(2) Hitachi 6gb SATA III drives @2TB: http://www.newegg.com/Product/Product.aspx?Item=N82E16822145473
3 DVD/CD/BLUERAY DRIVES:
1 SATA DVD DRIVE
1 SATA BlueRay Drive
1 SATA CD Drive
(So 8 SATA Devices Total)
24GIGs of this ram: http://www.newegg.com/Product/Product.aspx?Item=N82E16820145321
1 NVida Geforce GTX 470
1 Soundblaster X-Fi Titanum Card
New Addition Water Cooler: http://www.newegg.com/Product/Product.aspx?Item=N82E16835181010&nm_mc=OTC-Froogle&cm_mmc=OTC-Froogle-_-Water+Cooling-_-Corsair-_-35181010

PROBLEM: My OC BIOS setting wont load. Even on failsafe i get the "double start". I want to get back to my OC (stable) settings.
UPDATE: Since I posted somebody messaged me mentioned I should have "reset the CMOS" after I installed the new cooler. So I did that, and now they system starts fine without the "double start". I am able to load one of my saved OC settings now as well (but any others causes a failure).
NEW QUESTIONS:
1. Since I reset the CMOS and now the system is starting fine on my last OC settings, is it safe to assume the sytem is stable for now?
2. I never made any power changes or BIOS changes after I installed the new cooler. Should I have?
3. After I reset the CMOS was I soupposed to reinstall the drivers from the MSI disk again? I did not, and the system seems to be fine, but I thought I was soupposed to do that after a CMOS reset.
4. Is there a new BIOS version for my setup that may be better now? Im currently on v1.5
Here is a screenshot from CPUZ of the system information currently. This is with it booting normally after my CMOS reboot. I just figured id post it incase it helps with any of my questions. Thanks so much for helping guys!

Urgent help needed(java frames)

Hi,
I need urgent help for correcting a piece of code.
I have written a piece of code for building a gui with some buttons, drawing some geometric shapes.The code consists of two files called Graph and Frame.
The problem I suppose in the last part of the Graph file, which Rectangle and Circle are called together, the only shape that the program draws is rectangle.Here is the code:
//Graph
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import javax.swing.event.*;
import java.io.*;
import java.util.*;
public class Graph extends JPanel {
LinkedList color;
LinkedList figures;
public Graph() {
setBackground(Color.white);
figures = new LinkedList();
color = new LinkedList();
int z;
class Point {
int x;
int y;
public Point(int x, int y) {
this.x = x;
this.y = y;
public Point(Point p) {
x = p.x;
y = p.y;
public String toString() {
return "(" + x + ", " + y + ")";
public void move(Point dist) {
x += dist.x;
y += dist.y;
abstract class GeomFigur {
public abstract void move(Point p);
class Line extends GeomFigur {
Point p1, p2;
public Line(Point p1, Point p2) {
this.p1 = new Point(p1);
this.p2 = new Point(p2);
public String toString() { return "Line from " + p1 + " to " + p2; }
public void move(Point dist) {
p1.move(dist);
p2.move(dist);
class Rectangle extends Line {
public Rectangle(Point p1, Point p2) {
super(p1, p2);
public String toString() { return "Rectangle from " + p1 + " to " + p2; }
class Circle extends GeomFigur{
Point centre;
int radius;
public Circle(Point centre, int radius) {
this.centre = new Point(centre);
this.radius = radius;
public String toString() {
return "Circle, centre " + centre + ", radius " + radius;
public void move(Point dist) { centre.move(dist); }
public void addRectangle(int x, int y, Color col) {
Rectangle r =new Rectangle(new Point(x,y),new Point(x+20,y+20));
figures.addLast(r);
color.addLast(col);
repaint();
public void addCircle(int x, int y, Color col) {
Circle c =new Circle(new Point(x,y), 1 );
figures.addLast(c);
color.addLast(col);
repaint();
public void paintComponent(Graphics g) {
super.paintComponent(g);
for (int i=0;i < figures.size();i++) {
Rectangle rect = (Rectangle)figures.get(i);
//Circle circ = (Circle)figures.get(i);
g.setColor(Color.black);
g.drawRect(rect.p1.x,rect.p1.y,20,20);
g.setColor((Color)color.get(i));
g.fillRect(rect.p1.x,rect.p1.y,20,20);
//g.setColor(Color.black);
// g.drawOval(circ.centre.x,circ.centre.y,20,20);
// g.setColor((Color)color.get(i));
// g.fillOval(circ.centre.x, circ.centre.y, 20, 20);
//Frame
import javax.swing.*;
import java.awt.*;
import java.awt.event.*;
import java.io.*;
public class Frame extends JFrame implements ActionListener {
JButton button1, button2, button3, button4, button5 ;
Graph gr;
JComboBox cbx;
JComboBox cby;
JComboBox col;
JMenu filemenu;
JMenuItem quit;
JMenuBar menubar;
int x=10;
int y=10;
Color color=Color.red;
public Frame() {
menubar = new JMenuBar();
filemenu = new JMenu("File");
filemenu.setMnemonic('F');
quit = new JMenuItem("Quit");
quit.addActionListener(this);
quit.setMnemonic('Q');
quit.setAccelerator(KeyStroke.getKeyStroke('Q',Event.CTRL_MASK,false));
filemenu.add(quit);
menubar.add(filemenu);
setJMenuBar(menubar);
button1 = new JButton("Rectangle");
button1.addActionListener(this);
button2 = new JButton("Circle");
button2.addActionListener(this);
button4 = new JButton("Ellipse");
button4.addActionListener(this);
button5 = new JButton("Triangle");
button5.addActionListener(this);
button3 = new JButton("Reset");
button3.addActionListener(this);
String[] elements_x= {"10","20","30","40","50","60","70"};
cbx = new JComboBox(elements_x);
cbx.addActionListener(this);
cbx.setActionCommand("cbx");
String[] elements_y= {"10","20","30","40","50","60","70"};
cby = new JComboBox(elements_y);
cby.addActionListener(this);
cby.setActionCommand("cby");
String[] elements_color = {"Red","Blue","Green","Orange","Yellow" };
col = new JComboBox(elements_color);
col.addActionListener(this);
col.setActionCommand("col");
gr = new Graph();
JPanel top = new JPanel(new BorderLayout());
JPanel inputs = new JPanel(new GridLayout(6,1));
inputs.add(button1);
inputs.add(button2);
inputs.add(button3);
inputs.add(button4);
inputs.add(button5);
inputs.add(cbx);
inputs.add(cby);
inputs.add(col);
top.add(gr,BorderLayout.CENTER);
top.add(inputs,BorderLayout.WEST);
getContentPane().add(BorderLayout.CENTER, top);
setSize(500,300);//set window size
//take care of actions
public void actionPerformed(ActionEvent e) {
String command = e.getActionCommand();
if (command.equals("Quit")){
System.exit(0);//terminate program
else if (command.equals("Rectangle")){
//add Rectangle to graph at
//position x,y and with certain color
gr.addRectangle(x,y,color);
else if (command.equals("Circle")){
gr.addCircle(x,y,color);
else if (command.equals("Reset")){
else if (command.equals("Triangle")){
else if (command.equals("Ellipse")){
else if (command.equals("cbx")){
x=Integer.valueOf((String)((JComboBox)e.getSource()).getSelectedItem()).intValue();
else if (command.equals("cby")){
y=Integer.valueOf((String)((JComboBox)e.getSource()).getSelectedItem()).intValue();
else if (command.equals("col")){
String temp=(String)((JComboBox)e.getSource()).getSelectedItem();
if (temp=="Red") color=Color.red;
else if (temp=="Blue") color=Color.blue;
else if (temp=="Green") color=Color.green;
else if (temp=="pink") color=Color.pink;
else if (temp=="lightGray") color=Color.lightGray;
//main program
public static void main(String [] args) {
Frame appl = new Frame();
appl.setVisible(true);
Thanks in advance
Marina

Hi,
You are very lucky that I'm currently boored. You should never tag a question as urgent. It might be urgent to you, but not to us who answer. And you should also use code formatting when you post code (see the formatting tips, or use the code-button).
I made some changes to your Graph class. The most important thing is the abstract draw method that I added to the GeomFigur class.
import java.awt.*;
import javax.swing.*;
import java.util.*;
public class Graph extends JPanel {
    LinkedList figures;
    public Graph() {
        setBackground(Color.white);
        figures = new LinkedList();
    int z;
    abstract class GeomFigur {
        protected Color color;
        public GeomFigur(Color color) {
            this.color = color;
        public abstract void move(Point p);
        public abstract void draw(Graphics g);
    abstract class Line extends GeomFigur {
        Point p1, p2;
        public Line(Color c, Point p1, Point p2) {
            super(c);
            this.p1 = new Point(p1);
            this.p2 = new Point(p2);
        public String toString() {
            return "Line from " + p1 + " to " + p2;
        public void move(Point dist) {
            p1.move(dist.x, dist.y);
            p2.move(dist.x, dist.y);
    class Rectangle extends Line {
        public Rectangle(Color c, Point p1, Point p2) {
            super(c, p1, p2);
        public String toString() {
            return "Rectangle from " + p1 + " to " + p2;
        public void draw(Graphics g) {
            System.out.println("Draw rectangle at " + p1 + " with color " + color);
            g.setColor(Color.black);
            g.drawRect(p1.x, p1.y, 20, 20);
            g.setColor(color);
            g.fillRect(p1.x, p1.y, 20, 20);
    class Circle extends GeomFigur {
        Point centre;
        int radius;
        public Circle(Color c, Point centre, int radius) {
            super(c);
            this.centre = new Point(centre);
            this.radius = radius;
        public String toString() {
            return "Circle, centre " + centre + ", radius " + radius;
        public void move(Point dist) {
            centre.move(dist.x, dist.y);
        public void draw(Graphics g) {
            System.out.println("Draw circle at " + centre + " with color " + color);
            g.setColor(Color.black);
            g.drawOval(centre.x, centre.y, 20, 20);
            g.setColor(color);
            g.fillOval(centre.x, centre.y, 20, 20);
    public void addRectangle(int x, int y, Color col) {
        System.out.println("x,y,col " + x + ":" + y + ":" + col);
        Rectangle r = new Rectangle(col, new Point(x, y), new Point(x + 20, y + 20));
        figures.addLast(r);
        repaint();
    public void addCircle(int x, int y, Color col) {
        System.out.println("x,y,col" + x + ":" + y + ":" + col);
        Circle c = new Circle(col, new Point(x, y), 1);
        figures.addLast(c);
        repaint();
    public void paintComponent(Graphics g) {
        super.paintComponent(g);
        for (int i = 0; i < figures.size(); i++) {
            GeomFigur drawable = (GeomFigur)figures.get(i);
            drawable.draw(g);
}/Kaj

IPhone 3G 8GB Crashes when syncing with iTunes. URGENT HELP NEEDED.

I have latest iTunes and OS on my iPhone 3G...
Every time i plug my iPhone in it begins to sync and then iTunes will freeze and not respond..
I have tried re installing iTunes.. I can't reset my iPhone as i can't create a backup..
URGENT HELP NEEDED PLEASE!

I don't have an iphone, but if it's anything like my click-wheel ipod, a reset doesn't delete anything.
It just resets the ipod's operating system, kind of like a PC restart. Did you try this Sleep/Wake button thing mentioned here?
http://support.apple.com/kb/HT1737
Maybe it's a podcast of voice memo causing the problem like it did for this person
http://discussions.apple.com/message.jspa?messageID=10907809#10907809
That's all I got. You might have better luck on an iPhone forum. Everyone there would probably have one. Like I said, I don't.

Urgent help. I have upgraded my phone but every few hours the apple appears and stays for 15 min an hour or more?

Urgent help. I have upgraded my phone but every few hours the apple appears and stays for 15 min an hour or more?

Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.
If the issue persists, take the device to Apple for evaluation.

HELP WITH IPHONE 4S IPHONE URGENT HELP PLEASE?

IPHONE URGENT HELP PLEASE?
for the whole day my network has been 'Searching...'
i have tried airplane mode on and off, turning my phone on and off and network reset and taking sim in and out.
so i backed up my phone and restored to factory settings as i don't think i did the option of choosing manually select a carrier.
my network is still 'searching...' and it won't let my wifi to allow me to activate my iphone. i have tried to connect to itunes and it still won;t work.
i keep getting a message about no activation server.
this is a new iphone. i got it replaced on saturday.
PLEASE SOMEONE HELP ME!!!!!!!!!!!!!!!!!!!!!!!!!!!

Hello,
If this is a new iPhone then you will have free access, as all iPhones come with it, to Apple support. I would have them take care of an issue like this.
Hope this helps.
Regards,
Jake

Need urgent help. I have been trying to resolve this problem to no avail. I am able to preview my sp

Need urgent help. I have been trying to resolve this problem to no avail. I am able to preview my sprymenu on my local browsers opera, google crome, and IE but when it is uploaded, the sprymenu squashes to the left hand side.

Please get your checkbook ready. (Only kidding.)
Have you ever done a hard factory reset of your Airport Express base? If not, then try it. Push down the reset button with a pen, then keep it depressed as you plug AX into the wall and keep holding it down until the green light blinks 4 times and then turns amber. Then let go. Unplug your broadband modem for a couple of minutes and shut down your Mac. First restart the modem, then the Mac. Use Airport Setup Assistant to set up a new network from scratch.
In System Prefs > Network > Show > Network Port Configurations drop n drag Airport to the top of the list and deselect all port configurations that you do not use.
That's a start.

Need urgent help! - I accidentally sycn my friend's iphone account to my company's phone. I could not swich back to my own icloud account because of the icloud password i enter was incorrect. My friend does not use this icloud account since age.

Need urgent help! - I accidentally sync my friend's iphone account to my company's iphone. I could not switch back to my own icloud account because of the icloud password i enter was incorrect. My friend does not use this icloud account since age only remember 1 password which i already try but iphone shown that " incorrect password" I checked on icloud ID and try to log in but it shown as " You Apple ID was disable for security reason. To enable your account must reset password" but so bad again, the email address that he used to create icloud ID also lock for security reason. May Apple Supporter please help reset it ASAP? I can verify that I am the iphone's owner, as it belong to company's phone.

Have your company IT department get proof that the company was the
original purchaser of the iPhone and visit a physical Apple store with
proof of original purchase, proof that person is company representative,
and the iPhone - Apple may be able to help. If no physical Apple store,
contact Apple - you will still need the same items of proof.

Iphone 5 changes time randomly.. need urgent help!!

hi everybody .. i need urgent help to fix the problem of my iphone 5 ( IOS 7, Vodafone Germany) .. 2 weeks ago i noticed that the time on iphone was completely wrong and not related even to other time zones .. sometimes it freezed at the same minute for 1 hour .. sometimes it ran anticlockwise.. i switched off the automatic time setting..i made reset and erased all contents and reloaded all configuration from iCloud..the same problem.. i registered it as new iPhone .. no improvement... i switched off the WIFI..3G...i made reset using iTunes .. same error. same error... i took it to Apple store in Dresden- Germany and demostrated the problem there .. they told me that the problem beyond their knowledge and i have to contact apple support ... i sent the iPhone to Apple support in Netherland ... they sent it back on the next day coz they were not able to reproduce the problem...after regestering the iPhone again with my ID.. the same problem ... it's catastrophic coz many functions are time dependent (imessege, Calender, Email, etc.. )..and i cannot rely on my iPhone anymore... has anybody encountered the same problem in germany... and what is the solution?

If the phone is failing to charge, then there are three possibilities -
1) The charging cable is defective - does it work with anything else?
2) The power source is defective - unlikely since you have tried different ones with same result.
3) The phone has a hardware failure - which means you need to take to an Apple store or call them up for advice.

Urgent Help In ABAP

Hi Gurus,
Please i need an urgent help from you guys. There is a demand file which consits of (Siteno(plant), Item No ,Item Description, Delivery due date) will be placed in a unix system or windows system. I need to write an interface which shows a radiobutton for unix & windows and fileupload button & download button.When user clicks should be able to select only one radiobutton (unix or windows) to upload or download.When the user clicks the fileupload / download button,it should pick up the file or drop the file at particular unix or windows system.
Please help me or give me sample code where in i can select the radiobutton and i can upload / download from unix or windows path. and during upload process (for both unix/windows) ,i should be able to persist into a custom table (ztable,if iam not wrong) and while downloading read the records from custome table and create an excel file to be placedon unix/windows based on the radio button.
Thanks in advance, i need ur help please.
Regards
Bruno

Hi Bruno,
Please checkout this code sample
ABAP code for uploading a TAB delimited file into an internal table.
The code is base on uploading a simple txt file.
<b>
http://www.sapdevelopment.co.uk/file/file_uptabpc.htm</b>
Thanks,
Aby

[URGENT HELP NEEDED] Premiere Pro CS6 failed rendering

Hello!
I`ll try to make this quick because I need help asap. I`ve been starting to make YouTube gaming videos 3 weeks ago and my channel is growing up pretty fast. I promised I would make a video everyday but it`s been a full week since I couldn`t upload because I was busy and when I tried to render it failed.
Anyway here`s how it goes.I`ve recorded with fraps some gameplay footage with the resolution of 1360x706. One of my friends reccommanded me Adobe Premiere Pro for editing so I`m using the trial version of CS6. I create a new project and choose a format of 720 25 (cant really remember the exact name). I then import my recorded files and when I place them in the sequence it tells me the resolution is different and asks me if I want to change the sequence settings according to the files. Usually, I ignore it and when I export the Media I just tick the option: "Scale to Fill" and that usually works just fine, quality HD on YT...
But this week it has driven me crazy, I really don`t want to explain how much stress and dissapointment this has caused to me because I think I`ll end up raging...I`ll just tell you I`ve been trying for a couple of days more than 7 time to render the project(each time it takes about an hour and a bit more, so let`s just call it 7 hours wasted). The problem actually is that when I check the output file after exporting the media, the file size is ONLY 24 bytes!!! Other times the file size gets to like half of the one that should be or less, but mainly the render even so takes up a normal length of time of processing but in the end the file is only 24 bytes..Thing is I don`t encounter any error whatsoever...
I really need some urgent help!
Thanks!

1st, some FRAPS information
These are for Premiere Elements, but may help with PPro
Fraps & Elements http://forums.adobe.com/thread/871095
-and more Elements http://forums.adobe.com/thread/943772
-and yet more Elements http://forums.adobe.com/thread/967201
2nd, it is REALLY better to have your project sequence match your video
Please NOTE that the PPro CS6 screen may look a bit different (I use CS5)
For CS5 and later, the easy way to insure that your video and your project match
See 2nd post for picture of NEW ITEM process http://forums.adobe.com/thread/872666
-and a FAQ on sequence setting http://forums.adobe.com/message/3804341

URGENT HELP NEEDED!!! (Almost a matter of life and death)

Well, it's more of a matter of failing a course or not...
Anyway, my Java professor gave us some labs to do. I know Java front and back, at least, whatever version I learned a few years back. This is my first tenure with the Scanner object, and it's messing me up.
I'm using Eclipse for my project. I have three files in the source folder, ABC_Manufacturing.java, mseast.dat and mswest.dat. Now, when I try to instanciate a new Scanner object, it won't find the files:
Scanner east = new Scanner(new FileReader("mseast.dat"));
Scanner west = new Scanner(new File("mswest.dat"));
I'm trying two seperate ways to do this. Neither are working, this is the error I get:
Exception in thread "main" java.lang.Error: Unresolved compilation problems:
     Unhandled exception type FileNotFoundException
     Unhandled exception type FileNotFoundException
     at ABC_Manufacturing.main(ABC_Manufacturing.java:38)
Now, I added these files OVER and OVER again. I added them. I created new files and pasted the contents in there. I used .txt files. All the same error. It's like it just won't take the time out to look for the files that are RIGHT IN THE DAMN PROJECT! Then I tried using a complete path, using C:\Java\whatever. SAME ERROR!!!!
Please, I need urgent help. This is due tomorrow at noon, and I have no idea what to do at this point. I can't really continue, because at this point its just looking at what prints out and formatting it, and I don't want to do that without testing to see if my code to convert the file data into arrays work. You dig? Thanks for any and all help, and I'm going to kill my professor...she spent a week going over parallel arrays but did nothing to show us how to import files into projects or use the scanner class. Also it doesn't help that at uni we have to use emacs, which I don't use at home.

d00erino wrote:
This is the the main class, so far:
public static void main(String[] args)throws IOException
          Scanner west = new Scanner(new File("mswest.dat"));
          int [] eastParts = new int[13];
          int [] eastQuant = new int[13];
          int [] westParts = new int[17];
          int [] westQuant = new int[17];
          System.out.print(west.nextInt());
And I didn't ignore that one guy (sorry, don't remember your username) I tried you and the other guy's responce. Both didn't work. I dunno how to get around errors. Figures, you don't learn that in the course but she'll spend a week on parallel arrays...Ok, well that can't possibly be complaining with the same error message you got before, so now you need to be (more) specific about what "didn't work" means.

URGENT HELP NEEDED!!! iOS8 behaviour!

We have 2 iPhones (6 & 5s) and an iPad using the same Apple ID. Both are running iOS8.
When someone calls either of the iPhones BOTH iPHONES RING!!!!
Yes, you read right, the same incoming call appears on BOTH iPhones at the same time.
This is obviously totally unacceptable not to mention useless.
Obviously both iPhones use the same account so that iCal & Contacts can be shared but sharing phone calls?
Really, I need some urgent help with this bug!!!!

Hi RexRox,
Based on your description, it sounds like you may have Continuity enabled, a feature in iOS 8 that allows you to take calls across more than one device (generally aimed at a single person with multiple devices on the same account). You may find the following article helpful, especially the following portion:
Turn off iPhone cellular calls
To turn off iPhone Cellular Calls on a device, go to Settings > FaceTime and turn off iPhone Cellular Calls.
Connect your iPhone, iPad, and iPod touch using Continuity
Regards,
- Brenden

****URGENT HELP NEEDED**** unable to print on metalic silver paper

I am in DESPERATE need of help.
I am trying to print on silver metalic paper using my Photomart C3180, but it wont print. It will printon white paper but not this stuff. I need urgent help as I am trying to make my own wedding invitations that i have to post out at the end of the month.
ANY help would be so greatfully received.
Thank ou
Kate

plz try to download the following set of drivers from the link below :::\
http://gimp-print.sourceforge.net/MacOSX.php3
This is a new set of default drivers and mayhelp u in resolving the issue.
Plz do run disk first aid after installing the driver....might suggest even before installaing.
Thanx !! for trying.

Urgent Help Needed: ATI Graphics Card install

Hello All.... I am in need of some urgent help..
I am trying to install a new graphics card - the ATI Radeon 9600 SE. I currently have a Voodoo3 card. I followed all of the instructions step by step, but when I plug the monitor to the Radeon card and boot up, I do not get any display. I have tried everything I can think of, and yet - I am sure the card is secured in place and the monitor is plug into the card.
Can anyone help me on this one.. ATI's support is, well - lacking..
Here is some info on my pc:
MCI motherboard
AMD Athlon(tm) XP 2000+ 1.7 GHz
768 MB
AMIINT - 10 Version 1.00, 07/10/02
Could the problem be with switching from a regular PCI card to an AGP card???

Quote
Originally posted by southmike
okay i'll bite what are omega drivers,
how are they different from cat4.2 drivers
i was suprised that the voodoo 3 would work in a AMD64 mobo...
whoops....just read the rest of the post :lol:
BTW is there an external power connector that needs to be plugged in?

URGENT HELP! Resetting OS

Similar Messages

Maybe you are looking for