Urgent Help, Thanks to any with advice... (capturing HDV)

Hello, my name is Justin. I am under the gun and have to turn in my final movie project this week. I have footage on my Canon XH A1, shot in HDV, 24F. When I capture to Final Cut Express 3.5, my footage is slightly fast. My audio is in real time but my footage is at about 115% percent. Needless to say this will not do. I tried all 3 HDV easy set up codecs. Help?
Thanks for any advice...

Hi Justin
How were you capturing the video, off the same camera you shot on. Problems occur if you you shot on a panasonic and capture off a sony as an example. Shoot and capture off the same an you should not have a problem.
A 2nd solution send the clip to the time line unlink the video and audio and slow down the video 1 or 2 percent at a time until there is a sync up. Might not work, but when in a bind any port in a storm!!
I shoot HDV as FCE3.5 allows me to capture the whole tape and it creates clips were as this would not be so with sd. The Sony HVRA1 has guides for on the flipout screen and the viewfinder.
Let me know if you come right!!
Justin..Durban..South Africa

Similar Messages

  • Need Urgent Help. ORA-12500 with no reason

    I need urgent help.
    I have 8.1.7.2.1 on Win2K.
    I get ORA-12500 error when trying to connect oracle instance. This problem begin to arise only when number of sessions reach a number about 200. At the same time there is no definite boundary for it. Once it happened when there were 216 session, then 196, then 206.
    There rarely (1/100) I get ORA-12514 and after again ORA-12500. Once I got ORA-12600.
    What it might be you think? It can't be a problem in listener.ora or in tnsnames.ora because it works fine if number of sessions is about 100. It tried to restart tnslistener (from lsnrctl and the service) and restarted database (but not the service). I did it different in sequences, but didn't help. What should I do? Is it a known bug?

    I need urgent help.
    I have 8.1.7.2.1 on Win2K.
    I get ORA-12500 error when trying to connect oracle instance. This problem begin to arise only when number of sessions reach a number about 200. At the same time there is no definite boundary for it. Once it happened when there were 216 session, then 196, then 206.
    There rarely (1/100) I get ORA-12514 and after again ORA-12500. Once I got ORA-12600.
    What it might be you think? It can't be a problem in listener.ora or in tnsnames.ora because it works fine if number of sessions is about 100. It tried to restart tnslistener (from lsnrctl and the service) and restarted database (but not the service). I did it different in sequences, but didn't help. What should I do? Is it a known bug? bash-2.03$ oerr ora 12500
    12500, 00000, "TNS:listener failed to start a dedicated server process"
    // *Cause:  The process of starting up a dedicated server process failed.
    // The executable could not be found or the environment may be set up
    // incorrectly.
    // *Action: Turn on tracing at the ADMIN level and reexecute the operation.
    // Verify that the ORACLE Server executable is present and has execute
    // permissions enabled. Ensure that the ORACLE environment is specified
    // correctly in LISTENER.ORA. The Oracle Protocol Adapter that is being
    // called may not be installed on the local hard drive. Please check that
    // the correct Protocol Adapter are successfully linked.
    // If error persists, contact Oracle Customer Support.
    There is not enough info to go on but the problem seems to be either in the listener.ora
    or tnsnames.ora. Did you make any changes before this started occurring?
    William

  • HELP! No longer able to capture HDV in FCP 6

    I had a seamless FCP workflow using my Canon XH-A1 and FCP 6. I always connect my camera and power it up first before starting FCP. My settings were perfect, then about a week and a half ago FCP would no longer capture HDV from the camera. I tried redoing the easy setups: HDV > HDV:1080i60. Then I tried all the other variations. I tried trashing the preferences and restarting my computer and all that. Then I tried to see if Toast 10 would recognize the HDV camera to capture... no. But all works fine when set to DV mode. Everything about this situation seemed to have pointed to the fault being with my camera, so I sent it off to canon to check it out ($$$). Today I borrowed a friends Sony HDV that has worked fine before and it too failed. FCP is not recognizing the HDV camera. In an act of desperation, I installed iMovie and opened it up, I connected the camera... wth, it works!?! I am now convinced that there is something not right with FCP. Any help on this would be greatly appreciated!!!

    I figured out the problem!!! It was "Rosetta". Hopefully this issue will help someone else in the future!
    When I upgraded to Intel Mac Pro from G5, many plugins were not supported. About a month and a half ago I opened an older project of mine and had problems rendering some vital sequences with several plugins from the G5. After going through every plugin I had and reinstalling them one by one, many plugins still would not work. My solution was to use Rosetta with FCP...
    I had not captured any HDV media since turning Rosetta on for FCP, and I guess forgot it was even on. I clicked on the FCP App and hit "command + i" for info, unchecked Rosetta, and instantly my HDV is capturing perfect again!
    I wish I could use an abundance of prolific and explicit vocabulary words to express knuckleheadedness of my inability to not figure this out sooner...
    ROSETTA was the CULPRIT of this issue!

  • Urgent Help - Server Process stop with Error Code -11113

    Hi All,
    I need help urgently,
    I have installed EP 7.0 on Win 2003, when i restarted the server,
    server process in MMC,  server0 stop with Exitcode -11113
    Anybody have any idea about this
    Thanks
    Sachin

    Sachin,
    Refer to the threads below.
    j2ee stopped exitcode -11113
    Server0 fails JLaunchIExitJava: exit hook is called (rc=-11113)
    Exitcode -11113
    Also,take a look at the SAP NOTE : 810434
    Hope it helps resolve your issue.
    Cheers,
    Sandeep
    p.s Consider rewarding for handy posts!

  • Urgent help in porting kvm with KNI and cygwin..

    I am using kvm with cldc 1.0.4 and midp 2.0. And for using KNI I need to recompile whole of the KVM again after including the native code. I am doing this right now at windows 2000 platform, I can rebuild KVM using make %KVM_ROOT%\build\win32\and get no errors
    But when I follow "KNI Programming Overview" in "KNI Specification",
    I add(copy) the native method and Java code from "KNI Programming Overview" to the directoris which is
    ${KVM_ROOT}/kvm/VmUnix/src/Java_mypackage_HelloWorld.c
    ${KVM_ROOT}/api/src/mypackage/HelloWorld.java
    then I type
    C:\J2ME\CLDC\kvm\VmWin\build>kvm_j -classpath c:\j2me\cldc\api\src mypackage.HelloWorld
    ALERT: Native method 'mypackage/HelloWorld::sayHello' not found
    Anyone has experience on it? I totaly follow the Sun's KNI Specification but I can't get a correct output. What else thing I need to know that don't specify in the documents. What reason make this? I never rebuild (make ) my KVM correctly or any envirnoment need to be set
    thanks in advanced
    Eric

    i tried the same like following with linux in linux respective directories
    Before rebuilding the KVM, I modify the makefile (in ${KVM_ROOT}/kvm/VmWin/build/) by adding "Java_mypackage_HelloWorld.c" at the end of "SCRFILES = ..."
    As I use Windows 2000 platform, I place my files like that :
    ${KVM_ROOT}/kvm/VmWin/src/Java_mypackage_HelloWorld.c
    ${KVM_ROOT}/api/src/mypackage/HelloWorld.java
    then I type : "make USE_KNI = true" (in %KVM_ROOT%/kvm/VmWin/build/)
    and finally :
    ${KVM_ROOT}/kvm/VmWin/build/kvm -classpath ${KVM_ROOT}/api/classes mypackage.HelloWorld
    when i build make file
    make USE_KNI=true
    Recursively making ../../tools/preverifier/build/linux all...make[1]: Entering directory `/home/vinod/j2me_cldc/tools/preverifier/build/linux'
    make[1]: Nothing to be done for `all'.
    make[1]: Leaving directory `/home/vinod/j2me_cldc/tools/preverifier/build/linux'
    <<<Finished Recursively making ../../tools/preverifier/build/linux all.
    Recursively making ../../api all...make[1]: Entering directory `/home/vinod/j2me_cldc/api'
    make[1]: Leaving directory `/home/vinod/j2me_cldc/api'
    <<<Finished Recursively making ../../api all.
    Recursively making ../../tools/jcc all...make[1]: Entering directory `/home/vinod/j2me_cldc/tools/jcc'
    make[2]: Entering directory `/home/vinod/j2me_cldc/api'
    make[2]: Leaving directory `/home/vinod/j2me_cldc/api'
    ... classes.zip
    make[2]: Entering directory `/home/vinod/j2me_cldc/tools/jcc'
    make[2]: `nativeFunctionTableUnix.c' is up to date.
    make[2]: Leaving directory `/home/vinod/j2me_cldc/tools/jcc'
    make[2]: Entering directory `/home/vinod/j2me_cldc/tools/jcc'
    make[2]: `ROMjavaUnix.c' is up to date.
    make[2]: Leaving directory `/home/vinod/j2me_cldc/tools/jcc'
    make[1]: Leaving directory `/home/vinod/j2me_cldc/tools/jcc'
    <<<Finished Recursively making ../../tools/jcc all.
    Recursively making ../../kvm/VmUnix/build all...make[1]: Entering directory `/home/vinod/j2me_cldc/kvm/VmUnix/build'
    make[2]: Entering directory `/home/vinod/j2me_cldc/tools/jcc'
    make[3]: Entering directory `/home/vinod/j2me_cldc/api'
    make[3]: Leaving directory `/home/vinod/j2me_cldc/api'
    ... classes.zip
    make[3]: Entering directory `/home/vinod/j2me_cldc/tools/jcc'
    make[3]: `nativeFunctionTableUnix.c' is up to date.
    make[3]: Leaving directory `/home/vinod/j2me_cldc/tools/jcc'
    make[3]: Entering directory `/home/vinod/j2me_cldc/tools/jcc'
    make[3]: `ROMjavaUnix.c' is up to date.
    make[3]: Leaving directory `/home/vinod/j2me_cldc/tools/jcc'
    make[2]: Leaving directory `/home/vinod/j2me_cldc/tools/jcc'
    ... obj/Java_mypackage_HelloWorld.o
    ... obj/kni.o
    ../../../kvm/VmCommon/src/kni.c: In function `KNI_NewString':
    ../../../kvm/VmCommon/src/kni.c:784: warning: dereferencing type-punned pointer will break strict-aliasing rules
    Linking ... kvm
    collect2: ld returned 1 exit status
    make[1]: *** [kvm] Error 1
    make[1]: Leaving directory `/home/vinod/j2me_cldc/kvm/VmUnix/build'
    make: *** [all] Error 1
    i am getting error like that always.....
    [root@dhcp189 linux]# kvm -classpath ${KVM_ROOT}/api/classes mypackage.HelloWorl d
    ALERT: Native method 'mypackage/HelloWorld::sayHello' not found
    could anyone help me
    thanks
    Vinod

  • Urgent Help Needed - Associating Statistics with User-Defined Functions

    Hello,
    We have an appication uses cost-based optimizer and uses a lot of TO_DATE and SYSDATE calls in FROM and WHERE clauses. For certain reasons, every call to TO_DATE and SYSDATE has been replaced by MY_TO_DATE and MY_SYSDATE respectively (which in turn call built-in functions). However, cost based optimizer is behaving strangely, which is understanble, based on the lack of user-defined functions statistics. I am under the impression that I should use something like:
    ASSOCIATE STATISTICS WITH FUNCTIONS my_to_date DEFAULT SELECTIVITY ?;
    ASSOCIATE STATISTICS WITH FUNCTIONS my_to_date COST (?,?,?);
    ASSOCIATE STATISTICS WITH FUNCTIONS my_sysdate DEFAULT SELECTIVITY ?;
    ASSOCIATE STATISTICS WITH FUNCTIONS my_sysdate COST (?,?,?);
    but what should the values (?) be?. I guess I want to replicate TO_DATE and SYSDATE values, but how would I find out what they are? Thanks in advance...
    P.S. I am also looking for workarounds (I cannot create a synonym for TO_DATE right?), so any help is welcome!!!

    Hi emmalou69 ,
    You told your actual parameter is
    5, 5, 7.3 and 'z'
    so change your method like
    public static int test(int x, int y, double d, char ch)
    because 5 - int; 7.3- float or double; z is char.
    your method returns
    public static int.
    so you should return only int variable. but in your code you mentioned double. it's not correct.
    The original code should look like
    public class rubbish
         public static void main(String args[]){
              rubbish f = new rubbish();
              f.test(5, 5, 7.3 ,'z');
         public static int test(int x, int y, double d, char ch)
              int value;
              x = 5;
              y = 5;
              d= 7.3;
              ch = 'z';
              value =((int) d + x + y + ch);
              System.out.println( x + ch + d + y);
              return value;
    }//here int value of z is 122.
    and int(7.3) is 7
    so 7+5+5+122 = 139.3
    but value =((int) d + x + y + ch); returns 139. because you convert double to int that is 7.3 to 7
    If it is useful, rate me duke dollars,
    Thanks

  • My ipod touchs location services has stopped working. I just installed a new modem to my pc could that be the problem and how to fix ? ive already reset the ipod to new status and no help. thank for any help

    my ipod touch has lost location services after i installed a new modem to my pc . it is turned on in the settings and i have even reset the ipod to new status. Any help would be appreciated thanks.

    Nothing you can do except wait until Apple adds the router to their database of routers and their location. If you or someone nearby does not have an iPhone it can take a while. There is no way to tell Apple to add a router to their database.
    iOS 5: Understanding Location Services

  • Output Format..Urgent help thanks

    //package test.example1;
    // Imports
    import java.util.*;
    import java.text.*;
    import java.util.Collection;
    import java.util.Vector;
    import test.shapes.Shape;
    import test.shapes.CalculationException;
    import test.shapes.round.Circle;
    import test.shapes.notround.Square;
    import test.shapes.blackbox.BlackBox;
    import java.util.Iterator;
    public class Example1 {
    public static void main(String[] args) {
    NumberFormat numFmt = NumberFormat.getInstance();
    numFmt.setMaximumFractionDigits(2);
    numFmt.setMinimumFractionDigits(2);
    BlackBox bb =BlackBox.getBlackBox();
    Collection c=bb.getShapes();
    System.out.println("Type of Shape Area Circumference Shape Details");
    System.out.println("------------ ---- -------------- -------------");
    for (Iterator i = c.iterator(); i.hasNext(); ){
    Shape s =(Shape)i.next();
    try{
    if (s instanceof Circle) {
    Circle ccl = (Circle)s;
    System.out.println("Circle"+
    " "+(String)numFmt.format(ccl.calculateArea())+
    " "+(String)numFmt.format(ccl.calculateCircumference())+
    " "+"Radius="+(int)ccl.getRadius());
    else if (s instanceof Square) {
    Square sq = (Square)s;
    System.out.println("Square"+" "+
    (int)sq.calculateArea()+" "+ (int)sq.calculateCircumference()+
    " "+"Side="+(int)sq.getSide());
    }//end try
    catch(CalculationException e) {
    if (s instanceof Square) {
    Square sq = (Square)s;
    System.out.println("Square N/A N/A"+
    " "+"Radius="+(int)sq.getSide());
    }//end for loop
    and here my my output that I got:
    Type of Shape Area Circumference Shape Details
    Circle 78.54 31.42 Radius=5
    Square 9 12 Side=3
    Circle 201.06 50.27 Radius=8
    the third line is shifted to the right one position because due the the bigger number of Area.
    I want the Output like this:
    Type of Shape Area Circumference Shape Details
    Circle 78.54 31.42 Radius=5
    Square 9 12 Side=3
    Circle 201.06 50.27 Radius=8
    How do I do it? Please teach me. Thanks a lots.

    I don't see any difference in both the outputs. May be you are trying to reformat it??

  • Need urgent help -update customer account with out stock(Reserve Invoice)

    hi
    when we creating an invoice ,it will update both customer account and
    invetory account. i need only customer account. how can do with this function using oInvoice buisness object and oinvoices lines. i am using
    C#
    Thanks
    Edited by: sap_beginer on May 1, 2008 2:55 PM

    Its same as I wrote you in other thread, use service type of invoice as
    .DocType = SAPbobsCOM.BoDocumentTypes.dDocument_Service
    Petr

  • Need urgent help for solving issue with my audio output.

    It seems that all of sudden my integrated speakers started to make buzzing sound for a minute of a sec. and the sound comes randomly only during playback.  Same thing also happens even on headphone. So any suggestions? Why it is happening?? 

    Hi
    Try to update the driver from hp.com website for Audio & Bios.
    Last step is to run a recovery on the unit before this please back up your data as it will be lost.
    If still does not work speaker on the unit has gone bad needs to be replaced.
    If your notebook is still under warranty, contact HP and arrange to have the speaker replaced.
    Let us know how it goes!
    *Although I am an HP employee, I am speaking for myself and not for HP.
    ****Click the White Kudos star to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    Regards
    Manjunath
    Let us know how it goes!
    "I work for HP."
    ****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    Regards
    Manjunath

  • Firewire device control with analogue capture?

    Please please help.
    I am trying to capture HDV footage (shot on a JVC HD251) in SD via our KONA LH.
    It seems farily easy to get the KONA to downcovert but i don't currently have any device control so therrefore have no timecode.
    On the AJA website this article seems to suggest that it is possible to have device control over firewire whilst capturing via the KONA.
    http://www.aja.com/html/supportkonaLHedoc.html and navigate to the WHITEPAPER: HDV Workflow
    Any help would be more than very welcome!
    Thanks in advance
    Mike

    sadly we are currently using our JVC HD251E camera which does not have RS422 as it is not a deck.
    it is the device control via firewire that is hinted upon in the whitepaper from the link at the top of this post that i am most interested in as it would be really useful if it is in fact possible.
    We don't intend on using our cameras as a decks for much longer and are looking at the possibilites of purchasing the BR-HD50 which has RS422 which will be ideal.
    Even with this we will still be using our Kona to downconvert...unless the JVC deck can downconvert via the firewire...which i guess i will only find out when trying it!
    Thanks for the suggestion all the same...but please please someone tell me if this is indeed possible. I don' tunderstand why AJA would hint at it if it is not possible.
    Mike

  • Batch capture HDV error

    I have FCP 5.14 and have just logged a bunch of HDV footage offline. I did this the normal way I would when capturing DV footage, marking the in and out point and then log the clip, standard stuff?
    When I try to Batch capture the offline clips it captures only 1 frame from each clip, then the clip details are also effected, ie the Media start and media end of my clips changes from what they where into two new time codes 1 frame either side of the newly captured clip.
    Is this a program error or am I just completely useless??? Can somebody help me please

    Not sure if this is your exact problem, but I've had issues with Batch Capturing HDV in FCP 5.1.4 using both a Sony M15U and M25U.
    The deck would seek to the appropriate place on the tape and then just jog back and forth looking for the right start point. It would do this about 3 times and then give up.
    The solution for this was a DROP FRAME / NON-DROP FRAME setting in FCP. If you go to your A/V Settings and then to the Device Control Presets tab and edit your preset (If it's locked you can just make a copy of it and edit the copy - I am using the Sony HDV firewire preset). If you know what your footage was shot in (drop or non) make this setting adjustment. If you don't know, try both.
    As soon as this not so little detail was checked everything batch captured without fail. Just make sure there aren't any timecode breaks on your tape.
    Hope this helps.

  • Capture HDV without Final Cut?

    I am on a shoot in a country that is known for confiscating tapes. Therefore, I need to have a backup of everything I shoot. Unfortunately, my plan of using a Firestore FS-4 failed when it broke 4 days into my shoot. My Mac does not have Final Cut on it and I can't find a way to download it. Is there any way to capture HDV with a program other than Final Cut?

    Sorry no.
    I am surprised when you say iMovie captures at 1/8 speed.
    I haven't tried it with AIC but I have tested FCE and my iMac was able to capture in realtime.
    I can't see why iMovie should be so slow. Even if you have a very old, slow computer it shouldn't take more than 30% longer than realtime.
    Have you been using iMovie 08? The much more "professional" iMovie 06 can be downloaded free here:-
    http://support.apple.com/downloads/iMovieHD6

  • My tabs will not restore after starting Firefox -- even with the option to restore my tabs and windows is checked in the "options" window. I'm losing tabs from previous sessions that I need to keep open every time I need to restart. Thanks for any advice!

    Is there something else I need to tweak to get rid of this annoyance instead of simply clicking the check box? I'm losing tabs from previous sessions that I need to keep open every time I need to restart. Thanks for any advice!

    Make sure that you do not use Clear Recent History to clear the <i>Browsing History</i> when you close Firefox.
    *https://support.mozilla.com/kb/Clear+Recent+History
    It is possible that there is a problem with the files sessionstore.js and sessionstore.bak in the Firefox Profile Folder.
    Delete the sessionstore.js [2] file and possible sessionstore-##.js [3] files with a number and sessionstore.bak in the Firefox Profile Folder.
    * Help > Troubleshooting Information > Profile Directory: Open Containing Folder
    * http://kb.mozillazine.org/Profile_folder_-_Firefox
    Deleting sessionstore.js will cause App Tabs and Tab Groups and open and closed (undo) tabs to get lost, so you will have to create them again (make a note or bookmark them).
    See also:
    * [1] http://kb.mozillazine.org/Session_Restore
    * [2] http://kb.mozillazine.org/sessionstore.js
    * [3] http://kb.mozillazine.org/Multiple_profile_files_created

  • After upgrading to iOS 5, my iPhone 4 takes a very long time to open digitally signed emails. I've tried with the SMIME settings enabled, but that doesn't help either. Any ideas on how to resolve this?  Thanks in advance.

    After upgrading to iOS 5, my iPhone 4 takes a very long time to open digitally signed emails. I've tried with the SMIME settings enabled, but that doesn't help either. Any ideas on how to resolve this?  Thanks in advance.

    I suspect you may have a corrupt photo or image that is causing the sync to fail or quit. You might want to try removing all of your photos by deselecting them in iTunes then sync - and try adding them by each sub-folders until you are able to nail down which sub-folder of photos, that causes the sync to stop or gives you errors.

Maybe you are looking for