Urgent help with FCP/compressor required. Format HDV1080i50.
Hi guys,
I need to send a 129 minutes HDV feature (with a few DVCPro and Targa frames added) project that i have just finished editing to:
1) SD DVD
2) HD DVD
3) Master Digital(Hard Disk)
4) Master Digital to Tape.
The project is as follows;
Captured footage: HDV 1080 i50
Some additional footage is in Targa and DVCPro file formats.
Frame Size: 1440 x1080 @ 25 fps
AIFF Audio 48Khz / 16 bit.
Have sent audio to STP for mixing and surround. The master file is a two track AIFF file.
The Sequence in FCP (was changed to, as initially was HDV1080i50) and Compressor codec are set to ProRes 422(HQ) and all else to 'BEST'.
I have, so far, exported the entire nested project from FCP as a self contained Quicktime movie and the file size is 24.5GB. It took ages to write, is heavy and the result gave me lots of interlacing errors showing all over. The DVCPro and Targa data(video) didn't show).
I haven't used the 'send to compressor' before (except for the web)and was hoping for some guidance from you all on which settings to use for the above four options.
Also, if I need to print to film(reverse telecine) later, since the video is interlaced, is it going to cause problems? Does Compressor de-interlace or do I 'select all' in FCP and hit de-interlace? Will doing any one of these help me to print to film without blowing it?
Thanks,
Himayath.
I have no clue where to startHow about the tutorials?
so if somebaody can gve me sample codes or can showSample code? Easy, take this:
public class SampleClass {
private static final String TEXT = "Hello World!";
public static void main (String[] args) {
System.out.println(TEXT);
Similar Messages
-
In need of immediate help with FCP new user taking over colleagues position
Good Morning. I am in urgent need of some help with a specific final cut pro question. My coworker and I have been working on a video project for our employer, a university. He ran the editor (FCP) and I ran the logistics of setting things up, keeping the contacts and scheduling, etc.
He has left until late August and there are two major typos in his work which is posted to the web at the moment. I need to correct these typos and have less than a faint idea of how to do it.
First of all, what is the file's last three letters? (.doc, .mov, etc...)
Second, can I edit this as easily as I think I can? Just click in the text file along the bottom timeline and edit that way?
How do I export the movie as an mp4 file after i have edited it.
Anything else that would be deemed helpful is always appreciated!
I really appreciate the help. I was never trained on this program because I never needed to be. Unfortunately, as it turns out, I did.
Thanks for the help!You need to locate the Project file. Which will be somewhere in your colleague's User space.
In the Finder, press command and F to activate the Find function.
Make sure the following parameters are set:
Search *This Mac* and Contents
Kind is Documents
Type the project name.
The icon looks like this:
Double click it to launch Final Cut Pro with the project.
To locate the text overlay, click on the Timeline to make it active. Use the down arrow on your keyboard to jump from one cut to the next. The text overlay will look similar to this:
Double click on the Text clip. This will place it in the Viewer (the left "monitor").
Click the "Controls" tab above the Viewer and make your changes. Press Return.
Clicking anywhere in the Timeline once more will update it.
Make sure that no clips are selected and the Timeline is the active window.
Go to the menu bar: File > Export > Using QuickTime Conversion.
In the window that opens, make sure that Format is set to QuickTime Movie.
Click the Options button. Look at the top of the next window.
Does it say Compression Setting: H264? If it does, great.
If not, click the settings button and choose H264 from the *Compression Type* button.
At bottom left, drag the Quality slider to Best. Click OK.
This brings you back to the previous window.
Click on Size if you need to change something -there are a number of presets, but you can choose a custom size if you wish. Click OK.
That window is dismissed and returns you to the Save dialog.
Type a name and choose a destination for your file.
Message was edited by: Nick Holmes -
Need some URGENT help with 3 DVD mastering issues PLEASE! :
Hi there,
Firstly, I am running DVD SP 3.0.2 on Mac OS 10.4.7 on a G5 Dual 2 GHz 3Gb Ram plenty of HD space...
I am creating a DVD with: An intro sequence, a main menu, 4 sub menus, and 4 sections with around 12 chapters each.
I am having some big problems, and a pretty stuck. I will lest them separately below, numbered. If you are able to help, please refer clearly to which number you are helping with. Any help is MUCH appreciated! Many thanks!!
1. Each of the 5 menus (1 main, 4 sub) have a background video, and a separate audio track. I added the background videos by simply dragging them to the assests panel, then from there onto the menu editor window. They are created in FCP and are properly encoded. However, when I click the motion button, or use the simulator, the videos do not show up. The music plays, but all i see is plain black.
What is going on?!?!?!
2. I am really struggling with rollover buttons. I have custom created buttons, and I wand them to have a soft red glow around them when hovered over. HOW ON EARTH DO I ACTUALLY DO THIS??
The buttons are in photoshop so can be exported with/without background/glow in any format.
3. Is it possible, once I have got the above rollover working, to have an image to the right hand side of my buttons which changes with the the button rollover. i.e. hover over button 1, see image 1. hover over button 2, image changes to image 2.
PLEASE PLEASE give any help you can, I have a deadline coming up and am quite stumped. Thanks again!!I am still having problems regarding issue Number 1. PLEASE ANYONE HELP?!
Sorry, I'm not sure about the motion menus. I avoid those whenever possible. But you might click on the menu in the storyline tab (whatever it's called -- the hierarchical view with the disc, tracks, slideshows, etc.) and look at the properties and see if there's anything you have to enable specifically for motion. And be sure the motion button is on on the main display/preview area, but it sounds like you already know how that works.
For your information, here is a screen grab of the menu I am trying to create:
http://www.redhavoc.co.uk/stuff/menu.jpg
I think it is obvious that when a button is hovered over, I want it to glow red, and the image to the right will change to match the respective button.
IS THIS GOING TO BE POSSIBLE????
Yes.
First, your menus have to be layered menus. Unfortunately, there's no way to convert non-layered menus to layered menus, so if you already have non-layered, you'll have to just delete them and create new layered menus. The button (and menu item) to create a layered menu should be right by the normal new-menu item.
Next, the graphical work is all in Photoshop.
Side tip: You may already know this, but I found it's best to use 640x480 for the Photoshop document. When I do text and leave it as a text object in the Photoshop file, it resizes poorly in DVDSP. So this ends up being another 720x480 vs. 640x480 square/rectangular pixel conversion thing. DVDSP plays in the 640x480 world, at least as far as the designer can see. So I keep my images at 640x480, and it doesn't have to resize, and everything looks right.
Moving on... Set up your basic background, the part that won't change (or will have other things covering it, like for your square image).
Then put in all the buttons and images you'll be using, each part in a separate layer. This could have fifteen buttons (you have five buttons, and there can be three versions for each -- inactive, selected, and activated versions) and five or six square images (you said one for each button, and you might want a blank default if, say, you want to add a "back" button on the menu and want some blank or default image for the square when they're on the "back" button).
Sometimes people don't bother with a separate "active" button state, but you usually want some visual feedback that they clicked the button. Also, I usually just build the default (unselected) button into the background; that's less hassle later on, and it will just draw the selected or activated buttons over that when the user is on that button.
Line up all your buttons and images. All the square images lined up perfectly on top of each other, all the buttons in the right places (so you'll have three buttons stacked on top of each other in each spot). Give each layer a short but quickly recognizable name, and line them up in a consistent order. (button1-default, button1-selected, button1-active, button1-squarepicture, then button2-default, ... etc.) Photoshop and DVDSP don't care, but it makes it easier for you later.
Note that earlier versions of DVDSP won't show Photoshop layer effects. (They handle layers, just not the effects, like inner glow, outer bezel, etc.) I don't remember when they changed this, but I think it was version 4.something. So if you're using that method to make your buttons glow, you may have to flatten each selected or active button layer, and you may even need to create a dummy blank layer underneath it first to give it something to flatten onto.
Save the file as a standard Photoshop file (.psd). Drag the file onto your DVDSP layered menu and set it as the background.
Now, in DVDSP, create all your buttons. Just drag boxes over/around the button pictures you have. Feel free to make them extra-big; users won't see the actual area you've selected, and bigger areas makes it easier for people to hit them if they're using a mouse on a computer to watch the DVD. You can point the buttons to their targets now if you want, and set the end jumps on the tracks if you want. (I tend to set the end jumps on the tracks so they automatically select the button for the next track.)
Now's the fun part, since it will actually hook everything up and should be easy if your naming layer order were consistent. Click on the layered menu (in that hierarchical view) and look at the properties window. (Sorry I can't remember the technical names for all these windows; I'm doing this all from memory. So feel free to ask more questions if you can't find what I'm talking about.) One of the properties tabs should have a grid of checkboxes with a list of your layers. Make sure the background is checked for all of the states. Then check the layers you want to show for each button state, as well as the corresponding square image to show for each.
Again, I'm doing this from memory, and I can't remember exactly how things are listed in that grid. But I remember it keeps your layers in the same order you put them in the Photoshop file and shows you those names, so it should make it easy to go down the list and check the right boxes.
And another side tip: You can update the Photoshop file, but once you've put it in DVDSP, if you change the layer order, it will screw up the check boxes you checked. It always shows you the layer names correctly, but it keeps the checkboxes in DVDSP simply assigned to the layer number, so the fifth layer will keep the same checkboxes even if you juggle them so some other layer is now the fifth layer. So if you do juggle the layers in Photoshop, go back and fix the checkbox list in DVDSP.
I put a sample Photoshop file based on yours in
http://dan.black.org/layered-menu-sample.psd
It's quick and dirty, but shows the layer layout, and you should be able to drop it on DVDSP to play with. (I also won't leave it there forever, maybe a few weeks, so anybody reading this in a month or more probably will get a 404 for that url.)
Again, doing this from memory, so feel free to ask if anything doesn't work or doesn't make sense.
G4/dual867 Mac OS X (10.4.5) 2GB/0.8TB -
Urgent Help with network access to FileOutputStream
URGENT HELP NEEDED GUYS...I am stuck on this past 2 days. I tried several alternatives but to vain.
I am trying to access a Folder on a user's computer which is lying in a different Domain.
For accessing this folder, I have the following information with me.
Domain name, PC name, folder name, windows username, windows password.
Note: This username and password will give me rights to read + write to that folder.
How to use these information to open a fileoutputstream ? Does the java.io package allow programs to pass a username, password , domainname, pcname and then the folder and filename to create/read/write files..
Pls. suggest code examples. Sometime back I posted this query but didnt get an answer to my satisfaction. I have tried at my end but unsuccessful yet. Help would be appreciated.
I am trying this on a Windows File System and Network domain
THIS IS V. URGENT
Thanks,Hi HJK,
I am referring to the last reply of yours.
" Hi, there are three approaches I can think of offhand:
1) make sure the user-context under which you run the java app has the right to access the remote drive.
2) Do the network connection in a batch or c program and call that at the start of your java app with Runtime#exec.
3) Write some c/c++ code to open the connection and integrate that via JNI.
Let me know what (other) solution you came up with in the end!
Regarding the 1st.
I am supposed to write a remote installation utility actually. There are around 200 PC(s) in a network on which I need to copy these java class files. My problem statement is such that at runtime I only have username, passwords, domain access. I am not supposed to map any drives. Its supposed to be done dynamically. No manual intervention required. :(
How do I do the network connection in a batch mode ? Let me know that?
If 2nd option can be done, probably I can think of action-3 at the moment I am quite blurr :( -
I have a HDV mpeg2 project that uses extensive chromakeying and motion graphics. Should I transcode my native files to prores422 and use a proress timeline in FCP?
If the answer is YES, is mpeg streamclip (freeware) a good program to use for the transcode?It's really not easy to do chroma keys with HDV material. Transcoding it to ProRes won't add the color information necessary for a clean key that wasn't recorded in the first place. HDV's color space just isn't set up for chroma keys. However graphics and any material NOT HDV may look a bit better if you transcode to ProRes.
That said, there are programs out there to help.
http://www.dvcreators.net/chroma-key-in-hd/ has some included in it.
http://www.dvgarage.com/prod/prod.php?prod=dvmatteb is a Mac program that gets good reviews for keying with consumer formats. Been around a long time I know.
A lot of the success of a clean key is the way it was shot in the first place... You'll find that the keyer in Motion is a bit better than the one that comes with FCP too.
Jerry -
Urgent help with simple BPEL process for reading data from database
Hello there,
I need help with BPEL project.
i have created a table Employee in Database.
I did create application, BPEL project and connection to the database properly using Database Adapter.
I need to read the records from the database and convert into xml fomat and it should to go approval for BPM worklist.
Can someone please describe me step by step what i need to do.
Thx,
DpsI have created a table in Database with data like Empno,name,salary,comments.
I created Database Connection in jsp page and connecting to BPEL process.
It initiates the process and it goes automatically for approval.
Please refer the code once which i created.
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"
"http://www.w3.org/TR/html4/loose.dtd">
<%@page import="java.util.Map" %>
<%@page import="com.oracle.bpel.client.Locator" %>
<%@page import="com.oracle.bpel.client.NormalizedMessage" %>
<%@page import="com.oracle.bpel.client.delivery.IDeliveryService" %>
<%@page import="javax.naming.Context" %>
<%@page import="java.util.Hashtable" %>
<%@page import="java.util.HashMap" %>
<%@ page import="java.sql.*"%>
<%@ page import= "jspprj.DBCon"%>
<html>
<head>
<title>Invoke CreditRatingService</title>
</head>
<body>
<%
DBCon dbcon=new DBCon();
Connection conn=dbcon.createConnection();
Statement st=null;
PreparedStatement pstmt=null;
Hashtable env= new Hashtable();
ResultSet rs = null;
Map payload =null;
try
env.put(Context.INITIAL_CONTEXT_FACTORY, "com.evermind.server.rmi.RMIInitialContextFactory");
env.put(Context.PROVIDER_URL, "opmn:ormi://localhost:port:home/orabpel");//bpel server
env.put("java.naming.security.principal", "username");
env.put("java.naming.security.credentials", "password");//bpel console
Locator locator = new Locator("default","password",env);
IDeliveryService deliveryService =
(IDeliveryService)locator.lookupService(IDeliveryService.SERVICE_NAME );
// construct the normalized message and send to Oracle BPEL Process Manager
NormalizedMessage nm = new NormalizedMessage();
java.util.HashMap map = new HashMap();
st=conn.createStatement();
out.println("connected");
String query1="Select * from EMPLOYEE";
rs=st.executeQuery(query1);
/*reading Data From Database and converting into XML format
so that no need of going to BPEL console and entering the details.
while (rs.next()){
String xml1 = "<AsynchBPELProcess1ProcessRequest xmlns='http://xmlns.oracle.com/AsynchBPELProcess1'>"+
"<Empno>"+rs.getString(1)+"</Empno>"+
"<EmpName>"+rs.getString(2)+"</EmpName>"+
"<Salary>"+rs.getString(3)+"</Salary>"+
"<Comments>"+rs.getString(4)+"</Comments>"+
"</AsynchBPELProcess1ProcessRequest>";
out.println(xml1);
nm.addPart("payload", xml1 );
// EmployeeApprovalProcess is the BPEL process in which human task is implemented
deliveryService.post("EmployeeApprovalProcess", "initiate", nm);
// payload = res.getPayload();
out.println( "BPELProcess CreditRatingService executed!<br>" );
// out.println( "Credit Rating is " + payload.get("payload") );
//Incase there is an exception while invoking the first server invoke the second server i.e lsgpas13.
catch(Exception ee) {
//("BPEL Server lsgpas14 invoking error.\n"+ee.toString());
%>
</body>
</html>
Its working fine.And i want it for Bulk approvals.please help me step by step procedure if any other way to implement this. -
Urgent help with Pages 5.0 needed
Hi guys,
I need urgent help! I deleted Pages 5.0 (as I HATED it) but now can't open a very important document. Can someone please tell me how to reinstall it??
Thanks
KellieDownloading again is not as easy as that. you must find the app in the "Purchased" section of the
app store and I think you then must hold down the option key to reinstall it.
BTW, I only worked with one document as a trial for Pages 5 and then imported it to Word and saved it. I then deleted Pages 5 (I can't believe anyone who works with software would think that piece of worthless junk would sufice for anyone who uses a word processor professionally), reopened the Word document and saved it in Pages 09.
I hope this helps -
Urgent Help with a my Cheap Greek Hotel!
Thanks for your help with the pseudocode. I have got many errors with this program in the funtions. The code is below. Is there someone who can help me get my head around them?
import Date;
import Money;
public class Hotel {
private Room[] rooms = new Room[12];
public Hotel() {
for(int i = 0; i<rooms.length; i++){
rooms[i] = new Room(i+1,20);
public static void main (String[]args)
// public void bookIn(String guest, Date today)
public void bookIn(String guest, Date today, int roomNumber)
if (roomNumber < 1 || roomNumber > rooms.length){
throw new Exception("Room numbers must be within 1-" + rooms.length);
if (rooms[roomNumber-1].getRoomHolder() !=null){
throw new Exception("Room " + roomNumber + " not available.");
rooms[roomNumber-1].setRoomHolder(guest);
rooms[roomNumber-1].setBookedIn(today);
// fn to put a guest in ata a specified date
public void bookOut (Date checkedIn, Date checkedOut)
//In the date class you can probably check the Calendar class to find
//out the syntax for subtracting dates
int nightsStayed = checkedOut - checkedIn;
//Now I'd have an array of Guest
//objects, where the room number = the position in the
//array. When a guest checks in, you can set whatever
//info. you need (check in date, guest name, etc.) and
//set it back to null when a guest checks out.
new Room[12][roomNumber] = null;
//calculate the fee
double price = getFee(nightsStayed);
System.out.println("You owe: "+price);
// public double bookOut(Date currentdate)
}//end method
public double bookOut (Date currentdate)
// fn to empty the room and may be calculate & return the value of the bill
public double getFee(int nightsStayed)
double fee = (nightlyFee*nightsStayed);
return fee;
//end method
//end class
}The errors in this program are listed below`
T:\Year 1\Programming Workshop\Assignment2\Assignment2\Hotel.java:31: cannot resolve symbol
symbol : method setRoomHolder (java.lang.String)
location: class Room
rooms[RoomNumber-1].setRoomHolder(guest);
^
T:\Year 1\Programming Workshop\Assignment2\Assignment2\Hotel.java:32: cannot resolve symbol
symbol : method setBookedIn (Date)
location: class Room
rooms[RoomNumber-1].setBookedIn(today);
^
T:\Year 1\Programming Workshop\Assignment2\Assignment2\Hotel.java:40: operator - cannot be applied to Date,Date
int nightsStayed = checkedOut - checkedIn;
^
T:\Year 1\Programming Workshop\Assignment2\Assignment2\Hotel.java:46: cannot resolve symbol
symbol : variable RoomNumber
location: class Hotel
new Room[12][RoomNumber] = null;
^
T:\Year 1\Programming Workshop\Assignment2\Assignment2\Hotel.java:46: unexpected type
required: variable
found : value
new Room[12][RoomNumber] = null;
^
T:\Year 1\Programming Workshop\Assignment2\Assignment2\Hotel.java:59: cannot resolve symbol
symbol : variable nightlyFee
location: class Hotel
double fee = (nightlyFee*nightsStayed);
^
T:\Year 1\Programming Workshop\Assignment2\Assignment2\Room.java:36: cannot return a value from method whose result type is void
return bookedIn;
^
7 errors
*** Compiler reported errorsIs there anyone who can transfer my pseudocode into language specific java? I really need some help. Thanks.Thanks for your Help regarding methods. You managed to help me correct two errors. Which means i know have six. Thanks ever so much. The method setRoom Holder has been recognised aswell as the method setBookedIn.
What did you mean by "I cannot use minus operators on dates?" Is there any other way that I can code this function so that it is acceptable?
int nightsStayed = bookedOut - bookedIn;
Can you help me code these last four functions please? Then my program will have no errors. I have to get rid of six.
// public void bookIn(String guest, Date today)
public void bookIn(String guest, Date today, int RoomNumber)
if (RoomNumber < 1 || RoomNumber > rooms.length){
throw new Exception("Room numbers must be within 1-" + rooms.length);
if (rooms[RoomNumber-1].getRoomHolder() !=null){
throw new Exception("Room " + RoomNumber + " not available.");
rooms[RoomNumber-1].setRoomHolder(guest);
rooms[RoomNumber-1].setBookedIn(today);
// fn to put a guest in ata a specified date
public void bookOut (Date bookedIn, Date bookedOut)
//In the date class you can probably check the Calendar class to find
//out the syntax for subtracting dates
int nightsStayed = bookedOut - bookedIn;
//Now I'd have an array of Guest
//objects, where the room number = the position in the
//array. When a guest checks in, you can set whatever
//info. you need (check in date, guest name, etc.) and
//set it back to null when a guest checks out.
new Room[12][RoomNumber] = null;
//calculate the fee
double price = getFee(nightsStayed);
DerbyIO.getString("You owe: "+price);
// public double bookOut(Date currentdate)
}//end method
public double bookOut (Date currentdate)
// fn to empty the room and may be calculate & return the value of the bill
public double getFee(int nightsStayed)
double fee = (nightlyFee*nightsStayed);
return fee;
//end method
//end class
} -
Urgent Help with Planning Book
Hello Gurus,
Need your help with a very urgent issue. I cannot see my key figure values in my planning book(Interactive Planning). I could sucessfully generate my CVC, then initialised my planning area. Then when I go the interactive planning I can see all my characteristics -Ex Material master( has all values), Prod type has values, etc. Iam in DEV system and have to move the whole config to QA now. I have to validate that the config works in QA. Its works ok in the sandbox but I cannot figureout why I can not see the values for key figs that Iam loading from a Flat File. Please help!!!!!!Hello Suresh,
I have one more question for you. Let me tell you my scenario. I have the client giving me a rough forecast for the future. I have to do stat forecast based on the history and check that against the initial forecast given by them. But, the problem I realised now is that when I go to my planning books I can see the values for 2008 in mothly buckets since I have 0calmonth. But the client gave me another file with forecast for 2008 in monthly buckets and for 2009 and 2010 in quarter buckets. So, i have a planning buck profile defined to meet that but, how do I upload the file with both 0calmonth and 0calquarter in a single file. Please let me know!! Urgent task.
Thanks again,
Chinna. -
We are tring to syndicate the vendor numbers only from vendor repository in xml format. I created an XSD for the same. See the XSD below :
<?xml version="1.0" encoding="utf-8"?>
<xs:schema id="Vendor" xmlns:xs="http://www.w3.org/2001/XMLSchema">
<xs:element name="Vendors">
<xs:complexType>
<xs:sequence>
<xs:element name="LIFNR" type="xs:string" />
</xs:sequence>
</xs:complexType>
</xs:element>
</xs:schema>
XSD validates fine and generates an output from syndicator, but the problem that we face is that this is creating 1 file for each vendor record. We want a consolidated file. I know I am missing something but cannot make it to work.
I tried to put the unbounded parameter in <xs:element name="Vendors"> but that makes the XSD invalid.
Need urgent help on this.
Thanks<?xml version="1.0" encoding="UTF-8"?>
<xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema" elementFormDefault="qualified" attributeFormDefault="unqualified">
<xs:element name="Vendors">
<xs:complexType>
<xs:sequence>
<xs:element name="Vendor" type="Vendor" minOccurs="0" maxOccurs="unbounded"/>
</xs:sequence>
</xs:complexType>
</xs:element>
<xs:complexType name="Vendor">
<xs:sequence>
<xs:element name="LIFNR" type="xs:string"/>
</xs:sequence>
</xs:complexType>
</xs:schema> -
Need urgent help with HSDIO hardware timing
Hi everyone,
I need urgent help regarding HSDIO hardware timing. I've been working in a project which generating serial ramp using HSDIO pxie device.
I'm using clock rate 40MHz and generating 14 bit of boolean for each step of ramp. And I have to generate simply 256 steps ramp.
Which means, 256 (steps) x 14 (boolean array) x 25 ns (period of 1 boolean value) = 89,6 ns.
What I'm doing right now is with using index of FOR loop as my input data (converting the index into 14bit boolean), then write into pxie device in every iteration,
which means, my data is getting into output in every 1ms time, right? (I'm using windows)
And I want to be able to generate faster than that.
How can I prewrite my 256 steps ramp, then write them all at once into pxie device. I'm really stuck here.
In the picture can you see how I do the write into device in every iteration of FOR Loop.
Regards,
Yan.hi, thanks for responding.
with using example of dynamic generation with script, I can manage to generate the ramp with controllable delay (generate the whole waveform, including delay with script command, then write to the card).
But I still have 1 question, I can test the output of the generation using oscilloscope and cant see the start delay (I'm writing delay at the start, before generating the ramp). My signal generated at 0 sec.
How can I check this start delay? is there any good example delivered with Labview to check this generation? Somehow I cant use the "dynamic generation and acquisition" example to see my generation (cant figure out how to capture the generated signal).
regards,
Yan. -
Need urgent help with the query - Beginer
Hello - I need help with a query to populate data in a table.Here is the scenario.
Source1
MnthID BranchCod CustID SegCode FXStatus ProfStatus Profit
200712 B1 C1 20 Y Y 100
Source2
MnthID BranchCod CustID ProdCode ProdIndex
200712 B1 C1 12 1
200712 B1 C2 12 0
Destination
MnthID BranchCod SegCode ProdCode CountSegCust CountProdCust ProfitProdCust
Condition and Calculations:
1)Source1 customer are base customers.If Source2 has customers who is not in source1 then that customer's record should not be fetched.
2)SegCode, FX Status, ProfStatus is one variable in destination table. [ SegCode = SegCode+ FXStatus (if FXStatus = Y)+ ProfStatus (if FXStatus = Y) ]
3)CountSegCust = CountCustID Groupby MnthID,BranchCod,SegCode Only.
4)CountProdCust = CountCustID Groupby MnthID,BranchCod,SegCode,ProdCode (when ProdIndex = 1)
5)ProfitProdCust = Sum of Profit of Customers Groupby MnthID,BranchCod,SegCode,ProdCode (when ProdIndex = 1)
Apologies for bad formatting.
Thanks in advance!!A total guess indeed.
It's not clear whether some aggregation can be done (summing counts of grouped data might cause some customers being counted more than once)
insert into destination
select mnthid,branchcod,segcode,prodcode,countsegcust,countprodcust,profitprodcust
from (select s1.mnthid,
s1.branchcod,
s1.segcode || case s1.fxstatus when 'Y' then s1.fxstatus || s1.profstatus end segcode,
s2.prodcode,
count(s1.custid) over (partition by s1.mnthid,
s1.branchcod,
s1.segcode || case s1.fxstatus when 'Y' then s1.fxstatus || s1.profstatus end
order by null
) countsegcust,
count(case proindex when 1
then custid
end
) over (partition by s1.mnthid,
s1.branchcod,
s1.segcode || case s1.fxstatus when 'Y' then s1.fxstatus || s1.profstatus end
s2.prodcode
order by null
) countprodcust,
sum(case proindex when 1
then profit
end
) over (partition by s1.mnthid,
s1.branchcod,
s1.segcode || case s1.fxstatus when 'Y' then s1.fxstatus || s1.profstatus end
s2.prodcode
order by null
) profitprodcust,
row_number() over (partition by s1.mnthid,
s1.branchcod,
s1.segcode || case s1.fxstatus when 'Y' then s1.fxstatus || s1.profstatus end
s2.prodcode
order by null
) the_row
from source1 s1,source2 s2
where s1.mnthid = s2.mnthid
and s1.branchcod = s2.branchcod
and s1.custid = s2.custid
where the_row = 1Regards
Etbin -
Need urgent help with Ifs1.1 on Solaris
We have installed IFS 1.1 with Oracle 8.1.7 on a three tier System (two Suns). We use JWS as WebServer. When we start IFS and JWS everything seems to work fine. But after some time (irregulary) we are not able to contact the JSP-Sites via a bowser. After restarting JWS, everything works fine for some time.
Sometimes it happens (about one times a day), that the whole JWS crashes (JWS-Admin doesn't work). So we have to restart the whole IFS.
What can be the problem? We need urgent help, because the deadline for our project is Wednesday.
By the way:
Where do I have to start CTX on the IFS- or the Oracle-Side?
nullYes, we tried the Oracle HTTP - Server, but we weren4t able to get it to work. We didn4t get our JSP-Files to work with it. But that is another issue. I think it4s not a problem of JWS, but IFS.
Additionally it is strange, that we are still able to connect to the database via SqlPlus.
IFS works fine for about 15 minutes, than it crashes, nothing works anymore. We found following errors in the IfsAgents.log:
maybe it can help?!
Mon Dec 04 23:12:20 CET 2000
Server STARTED: IfsAgents(19944) not managed
Attempting to load agent EventExchangerAgent
Agent EventExchangerAgent loaded
Server STARTED: IfsProtocols(19945) not managed
Attempting to start agent EventExchangerAgent
EventExchangerAgent: Start request
Agent EventExchangerAgent started
Attempting to load agent ExpirationAgent
Agent ExpirationAgent loaded
EventExchangerAgent: starting timer
Attempting to start agent ExpirationAgent
ExpirationAgent: Start request
Agent ExpirationAgent started
Attempting to load agent GarbageCollectionAgent
Agent GarbageCollectionAgent loaded
ExpirationAgent: computed initial delay (in ms) is: 10024504
ExpirationAgent: starting timer
Attempting to start agent GarbageCollectionAgent
GarbageCollectionAgent: Start request
Agent GarbageCollectionAgent started
Attempting to load agent ContentGarbageCollectionAgent
Agent ContentGarbageCollectionAgent loaded
GarbageCollectionAgent: computed initial delay (in ms) is: 11816890
GarbageCollectionAgent: starting timer
Attempting to start agent ContentGarbageCollectionAgent
ContentGarbageCollectionAgent: Start request
Agent ContentGarbageCollectionAgent started
Attempting to load agent DanglingObjectAVCleanupAgent
Agent DanglingObjectAVCleanupAgent loaded
ContentGarbageCollectionAgent: starting timer
Attempting to start agent DanglingObjectAVCleanupAgent
DanglingObjectAVCleanupAgent: Start request
Agent DanglingObjectAVCleanupAgent started
Attempting to load agent OutboxAgent
Agent OutboxAgent loaded
DanglingObjectAVCleanupAgent: computed initial delay (in ms) is: 5500105
DanglingObjectAVCleanupAgent: starting timer
Attempting to start agent OutboxAgent
OutboxAgent: Start request
Agent OutboxAgent started
Attempting to load agent ServiceWatchdogAgent
Agent ServiceWatchdogAgent loaded
OutboxAgent: Done processing
Attempting to start agent ServiceWatchdogAgent
ServiceWatchdogAgent: Start request
Agent ServiceWatchdogAgent started
Attempting to load agent QuotaAgent
Agent QuotaAgent loaded
ServiceWatchdogAgent: Initializing ServerWatchdogTable with 9 entries
ServiceWatchdogAgent: starting timer
Server STARTED: FtpServer(20082) managed by IfsProtocols(19945)
ServiceWatchdogAgent: New Server being watchdogged
Attempting to start agent QuotaAgent
QuotaAgent: Start request
Agent QuotaAgent started
QuotaAgent: starting timer
Server STARTED: CupServer(20124) managed by IfsProtocols(19945)
ServiceWatchdogAgent: New Server being watchdogged
Server STARTED: ImapServer(20130) managed by IfsProtocols(19945)
ServiceWatchdogAgent: New Server being watchdogged
Server STARTED: SmtpServer(20150) managed by IfsProtocols(19945)
ServiceWatchdogAgent: New Server being watchdogged
ServiceWatchdogAgent: Unlocked Server Detected in checkServer
ServiceWatchdogAgent: Unlocked Server Detected in checkServer
ServiceWatchdogAgent: Unlocked Server Detected in checkServer
ServiceWatchdogAgent: Unlocked Server Detected in checkServer
ServiceWatchdogAgent: Unlocked Server Detected in checkServer
ServiceWatchdogAgent: Unlocked Server Detected in checkServer
ServiceWatchdogAgent: Unlocked Server being investigated
ServiceWatchdogAgent: Unlocked Server being investigated
ServiceWatchdogAgent: Unlocked Server being investigated
ServiceWatchdogAgent: Unlocked Server being investigated
ServiceWatchdogAgent: Unlocked Server being investigated
ServiceWatchdogAgent: Unlocked Server being investigated
ServiceWatchdogAgent: Freeing unlocked server 19687
ServiceWatchdogAgent: Freeing unlocked server 19666
Server STOPPED: CupServer(19687) managed by IfsProtocols(19519)
ServiceWatchdogAgent: Freeing unlocked server 19723
ServiceWatchdogAgent: Freeing unlocked server 19520
Server STOPPED: FtpServer(19666) managed by IfsProtocols(19519)
Server STOPPED: SmtpServer(19723) managed by IfsProtocols(19519)
ServiceWatchdogAgent: Freeing unlocked server 19519
Server STOPPED: IfsAgents(19520) not managed
ServiceWatchdogAgent: Freeing unlocked server 19712
Server STOPPED: IfsProtocols(19519) not managed
Server STOPPED: ImapServer(19712) managed by IfsProtocols(19519)
ServiceWatchdogAgent: Freed Server removed from watchdog list
ServiceWatchdogAgent: Freed Server removed from watchdog list
ServiceWatchdogAgent: Freed Server removed from watchdog list
ServiceWatchdogAgent: Freed Server removed from watchdog list
ServiceWatchdogAgent: Freed Server removed from watchdog list
ServiceWatchdogAgent: Freed Server removed from watchdog list
QuotaAgent: Timer event: 0 active; 0 exceeded
ContentGarbageCollectionAgent: Freed 5 unreferenced ContentObjects
QuotaAgent: Timer event: 0 active; 0 exceeded
ServiceWatchdogAgent: IfsException publishing timer details:
ServiceWatchdogAgent: oracle.ifs.common.IfsException: IFS-11012: Unable to get events from other services
java.sql.SQLException: ORA-03114: not connected to ORACLE
ServiceWatchdogAgent: IfsException in checkForDeadServices():
ServiceWatchdogAgent: oracle.ifs.common.IfsException: IFS-10651: Unable to begin transaction
oracle.ifs.common.IfsException: IFS-10603: Unable to set database savepoint
java.sql.SQLException: ORA-03114: not connected to ORACLE
ServiceWatchdogAgent: IfsException in handle loop; continuing:
ServiceWatchdogAgent: oracle.ifs.common.IfsException: IFS-10651: Unable to begin transaction
oracle.ifs.common.IfsException: IFS-10603: Unable to set database savepoint
java.sql.SQLException: ORA-03114: not connected to ORACLE
ServiceWatchdogAgent: IfsException publishing timer details:
ServiceWatchdogAgent: oracle.ifs.common.IfsException: IFS-10651: Unable to begin transaction
oracle.ifs.common.IfsException: IFS-10603: Unable to set database savepoint
java.sql.SQLException: ORA-03114: not connected to ORACLE
ServiceWatchdogAgent: IfsException publishing timer details:
ServiceWatchdogAgent: oracle.ifs.common.IfsException: IFS-10651: Unable to begin transaction
oracle.ifs.common.IfsException: IFS-10603: Unable to set database savepoint
java.sql.SQLException: ORA-03114: not connected to ORACLE
ServiceWatchdogAgent: IfsException publishing timer details:
ServiceWatchdogAgent: oracle.ifs.common.IfsException: IFS-10651: Unable to begin transaction
oracle.ifs.common.IfsException: IFS-10603: Unable to set database savepoint
java.sql.SQLException: ORA-03114: not connected to ORACLE
ServiceWatchdogAgent: IfsException publishing timer details:
ServiceWatchdogAgent: oracle.ifs.common.IfsException: IFS-10651: Unable to begin transaction
oracle.ifs.common.IfsException: IFS-10603: Unable to set database savepoint
java.sql.SQLException: ORA-03114: not connected to ORACLE
ServiceWatchdogAgent: IfsException publishing timer details:
ServiceWatchdogAgent: oracle.ifs.common.IfsException: IFS-10651: Unable to begin transaction
oracle.ifs.common.IfsException: IFS-10603: Unable to set database savepoint
java.sql.SQLException: ORA-03114: not connected to ORACLE
null -
URGENT Help With Scientific Calculator!
Hi everybody,
I designed a calculator, and I need help with the rest of the actions. I know I need to use the different Math methods, but I tried tried that and it didn't work. Also, it needs to work as an applet and application, and in the applet, the buttons don't appear in order, how can I fix that?
I will really appreciate your help with this program, I can't get it to work and I'm frustrated, I need to finish this for next Tuesday 16th. Please e-mail me at [email protected].
Below is the code for the calcualtor.
Thanks a lot!
-Maria
// calculator
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import javax.swing.border.*;
public class calculator extends JApplet implements
ActionListener
private JButton one, two, three, four, five, six, seven,
eight, nine, zero, dec, eq, plus, minus, mult, div, clear,
mem, mrc, sin, cos, tan, asin, acos, atan, x2, sqrt, exp, pi, percent;
private JLabel output, blank;
private Container container;
private String operation;
private double number1, number2, result;
private boolean clear = false;
//GUI
public void init()
container = getContentPane();
//Title
//super("Calculator");
JPanel container = new JPanel();
container.setLayout( new FlowLayout( FlowLayout.CENTER
output = new JLabel("");
output.setBorder(new MatteBorder(2,2,2,2,Color.gray));
output.setPreferredSize(new Dimension(1,26));
getContentPane().setBackground(Color.white);
getContentPane().add( "North",output );
getContentPane().add( "Center",container );
//blank
blank = new JLabel( " " );
container.add( blank );
//clear
clear = new JButton( "CE" );
clear.addActionListener(this);
container.add( clear );
//seven
seven = new JButton( "7" );
seven.addActionListener(this);
container.add( seven );
//eight
eight = new JButton( "8" );
eight.addActionListener(this);
container.add( eight );
//nine
nine = new JButton( "9" );
nine.addActionListener(this);
container.add( nine );
//div
div = new JButton( "/" );
div.addActionListener(this);
container.add( div );
//four
four = new JButton( "4" );
four.addActionListener(this);
container.add( four );
//five
five = new JButton( "5" );
five.addActionListener(this);
container.add( five );
//six
six = new JButton( "6" );
six.addActionListener(this);
container.add( six );
//mult
mult = new JButton( "*" );
mult.addActionListener(this);
container.add( mult );
//one
one = new JButton( "1" );
one.addActionListener(this);
container.add( one );
//two
two = new JButton( "2" );
two.addActionListener(this);
container.add( two );
//three
three = new JButton( "3" );
three.addActionListener(this);
container.add( three );
//minus
minus = new JButton( "-" );
minus.addActionListener(this);
container.add( minus );
//zero
zero = new JButton( "0" );
zero.addActionListener(this);
container.add( zero );
//dec
dec = new JButton( "." );
dec.addActionListener(this);
container.add( dec );
//plus
plus = new JButton( "+" );
plus.addActionListener(this);
container.add( plus );
//mem
mem = new JButton( "MEM" );
mem.addActionListener(this);
container.add( mem );
//mrc
mrc = new JButton( "MRC" );
mrc.addActionListener(this);
container.add( mrc );
//sin
sin = new JButton( "SIN" );
sin.addActionListener(this);
container.add( sin );
//cos
cos = new JButton( "COS" );
cos.addActionListener(this);
container.add( cos );
//tan
tan = new JButton( "TAN" );
tan.addActionListener(this);
container.add( tan );
//asin
asin = new JButton( "ASIN" );
asin.addActionListener(this);
container.add( asin );
//acos
acos = new JButton( "ACOS" );
cos.addActionListener(this);
container.add( cos );
//atan
atan = new JButton( "ATAN" );
atan.addActionListener(this);
container.add( atan );
//x2
x2 = new JButton( "X2" );
x2.addActionListener(this);
container.add( x2 );
//sqrt
sqrt = new JButton( "SQRT" );
sqrt.addActionListener(this);
container.add( sqrt );
//exp
exp = new JButton( "EXP" );
exp.addActionListener(this);
container.add( exp );
//pi
pi = new JButton( "PI" );
pi.addActionListener(this);
container.add( pi );
//percent
percent = new JButton( "%" );
percent.addActionListener(this);
container.add( percent );
//eq
eq = new JButton( "=" );
eq.addActionListener(this);
container.add( eq );
//Set size and visible
setSize( 190, 285 );
setVisible( true );
public static void main(String args[]){
//execute applet as application
//applet's window
JFrame applicationWindow = new JFrame("calculator");
applicationWindow.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
//applet instance
calculator appletObject = new calculator();
//init and start methods
appletObject.init();
appletObject.start();
} // end main
public void actionPerformed(ActionEvent ae)
JButton but = ( JButton )ae.getSource();
//dec action
if( but.getText() == "." )
//if dec is pressed, first check to make shure there
is not already a decimal
String temp = output.getText();
if( temp.indexOf( '.' ) == -1 )
output.setText( output.getText() + but.getText() );
//clear action
else if( but.getText() == "CE" )
output.setText( "" );
operation = "";
number1 = 0.0;
number2 = 0.0;
//plus action
else if( but.getText() == "+" )
operation = "+";
number1 = Double.parseDouble( output.getText() );
clear = true;
//output.setText( "" );
//minus action
else if( but.getText() == "-" )
operation = "-";
number1 = Double.parseDouble( output.getText() );
clear = true;
//output.setText( "" );
//mult action
else if( but.getText() == "*" )
operation = "*";
number1 = Double.parseDouble( output.getText() );
clear = true;
//output.setText( "" );
//div action
else if( but.getText() == "/" )
operation = "/";
number1 = Double.parseDouble( output.getText() );
clear = true;
//output.setText( "" );
//eq action
else if( but.getText() == "=" )
number2 = Double.parseDouble( output.getText() );
if( operation == "+" )
result = number1 + number2;
else if( operation == "-" )
result = number1 - number2;
else if( operation == "*" )
result = number1 * number2;
else if( operation == "/" )
result = number1 / number2;
//output result
output.setText( String.valueOf( result ) );
clear = true;
operation = "";
//default action
else
if( clear == true )
output.setText( "" );
clear = false;
output.setText( output.getText() + but.getText() );
}Multiple post:
http://forum.java.sun.com/thread.jsp?forum=31&thread=474370&tstart=0&trange=30 -
URGENT: Help with dynamic borders!
Hello all -
I DESPERATLY need help with this! I am using the code from
kirupa's xml photo gallery with the thumbnails. right now the alpha
changes on mouseover, fine...but my client is demanding that it
draw a border instead. I have been at this for about a week and
have NO idea how to do this...i have looked at things like API's
and things...but my main issue is that the images and MC's are all
created on the fly and i dont know how to code in an on mouseover
draw a border type of function, no idea at all!
This is my code as it sits now, PLEASE SOMEONE HELP ME!!!
thank you in advance!really could use some help quick here guys
Maybe you are looking for
-
Need help for Adapter Specific Message Attributes in Receiver Email Adapter
We want to use Adapter Specifice Message Attributes(ASMA) in Receiver Email Adapter for sending the mails dynamically, and to set the CC and BCC. I have gone through the help give in <a href="http://help.sap.com/saphelp_nw04/helpdata/en/a5/1b5342d8a7
-
Write to next page in Adobe Form
Hi, I have created a Dynamic non-interactive form. I need to write some values to a table in the form. The data gets written in the PDF, but since the data to write in the table is huge, i could only see the values in the first page only. I tried
-
Hi All, My env is oimps1 on linux and db on different machine. After the first initial load of the user and org data,suddenly the oim has become too slow viewing a profile takes 5 minutes and even I haveseen that the cpu goes to 100%. This is really
-
Backing up Lightroom photos with external hard drives. Which software? Thank you.
I watched Julieanne Kost's backup strategies. I have 2 TB Seagate GoFlex external drives to work with my Macbook. One external for photos, LR catalog backup, supporting files and the 2nd to backup external drive one. I also have a 3rd external drive
-
Safari 3.0 error message in Leopard 10.5.1
After I updated Leopard I now get the error message "You cannot use the application "Safari" with this version of Mac OS X". Thanks for any help you can provide. Rick