Urgent help with Index page needed

Can anyone help? I use Dreamweaver 8 to modify and update my
work's website and I've come across a very strange problem that I
haven't seen before. I amended a news page, entitled 'news.html'
and uploaded it as normal last week. I also put a few new pictures
on the index page and did the same. It was fine at that point,
however having looked at the page four days later, the news page
now shows as the home page when you visit the site. It isn't
calling itself the index page as the browser still shows as the
page as 'news.html'.
But the strange thing is, when you first go to the site or
click the homepage from an internal page, you get a very quick
glimpse of the original index page before the news page replaces
it. Almost overwrites it.
VERY confused. Have tried re uploading the index page and am
running out of solutions. Any help most welcome.

On Wed, 21 Feb 2007 11:54:52 +0000 (UTC), "Rach JH"
<[email protected]> wrote:
>Can anyone help? I use Dreamweaver 8 to modify and update
my work's website and
>I've come across a very strange problem that I haven't
seen before. I amended a
>news page, entitled 'news.html' and uploaded it as normal
last week. I also put
>a few new pictures on the index page and did the same. It
was fine at that
>point, however having looked at the page four days later,
the news page now
>shows as the home page when you visit the site. It isn't
calling itself the
>index page as the browser still shows as the page as
'news.html'.
>
> But the strange thing is, when you first go to the site
or click the homepage
>from an internal page, you get a very quick glimpse of
the original index page
>before the news page replaces it. Almost overwrites it.
>
> VERY confused. Have tried re uploading the index page
and am running out of
>solutions. Any help most welcome.
URL?
Win
Win Day, Wild Rose Websites
http://www.wildrosewebsites.com
[email protected]
Skype winifredday

Similar Messages

  • Urgent Help With Connections File Needed Please

    Hello All!
    I am getting the following error when I attempt to test my
    live site. I am testing database connectivity within my site that
    is hosted by GoDaddy. All pages are ASP and the database is stored
    in the root directory in GoDaddy's folder called "access_db". The
    folder has read/write access.
    Here is the error:
    Microsoft JET Database Engine error '80040e4d'
    Cannot start your application. The workgroup information file
    is missing or opened exclusively by another user.
    /sitename/requestquote/index.asp, line 130
    Here is the code from the connections file:
    <%
    ' FileName="Connection_ado_conn_string.htm"
    ' Type="ADO"
    ' DesigntimeType="ADO"
    ' HTTP="false"
    ' Catalog=""
    ' Schema=""
    Dim MM_connNAME_STRING
    MM_connNAME_STRING =
    "Provider=Microsoft.Jet.OLEDB.4.0;DataSource=username\access_db\filename.mdb;UserId=usern ame;Password=password;"
    %>
    The error above refrences "/sitename/requestquote/index.asp,
    line 130", and here is the code:
    rs_quote.ActiveConnection = MM_connNAME_STRING
    Please help.
    Thanks - Matt

    Sorry Tim? This is Dave. Did you read what said? I'm not
    Matt.
    Dave
    "TC2112" <[email protected]> wrote in message
    news:[email protected]...
    > It could be, you'd have to check in the control panel to
    make sure
    > permissions are set to read and write.
    > Have you tried changing the path in your connection
    string to the GoDaddy
    > path and uploading the file?
    > The info I posted tells you how to find out what the
    path on GoDaddy is.
    >
    > Tim
    >
    >
    > "Baxter" <baxter(RemoveThe :-)@gtlakes.com> wrote
    in message
    > news:[email protected]...
    > > Tim,
    > > Very good reply! I have no experience with GD other
    than the complaints
    I
    > > have read here about connections to databases etc.
    I think that if his
    > > connection test is ok that it has to be a
    permissions issue? What do you
    > > think?
    > > Dave
    > > "TC2112" <[email protected]> wrote in message
    > > news:[email protected]...
    > >> Hello,
    > >>
    > >> Sorry if some of this is repetitive in respect
    to what others have
    > >> advised
    > >> in this thread.
    > >> It's an answer I gave someone with similar
    problems a while ago.
    > >> It does answer your question about the
    successful path on your local
    > > server
    > >> being different than the path on GDs server.
    > >> There are also instructions on how to find the
    path on GD's server if
    > > needed
    > >> for DNS-Less connection.
    > >>
    > >>
    > >> Option 1:
    > >> You can try using a map path function like this
    in your connection
    > >> string:
    > >> access_db is the folder the database is in and
    mydatabase.mdb is the
    > > access
    > >> file.
    > >> Substitute your names.
    > >>
    > >> STRING = "Provider=Microsoft.Jet.OLEDB.4.0;Data
    Source=" &
    > >> Server.MapPath("access_db") &
    "\mydatabase.mdb;User Id=admin;Password="
    > >>
    > >> -or-
    > >>
    > >> Option 2:
    > >> You could try an OLEDB DSN-Less connection
    instead of using a DSN. It's
    > > not
    > >> hard to do.
    > >>
    > >> Step 1 is to figure out the location of the
    root directory on the
    host's
    > >> server..That's very easy to do yourself.
    > >>
    > >> Just make an asp page (I named mine
    "findit.asp"), and put the
    following
    > >> code between the <body> tags, like so:
    > >> <body>
    > >> <%
    > >> Response.Write("The location of this page
    is:<br>")
    > >>
    Response.Write(Request.ServerVariables("PATH_TRANSLATED") &
    "<br>")
    > >> Response.Write("The location of my root
    directory is:<br>")
    > >> Response.Write(Server.MapPath("\"))
    > >> Response.Write Path
    > >> %>
    > >> </body>
    > >>
    > >>
    > >> Upload it to the same location as your site's
    home page.
    > >> Once your new asp page is uploaded, just
    navigate to that page in your
    > >> browser.
    > >>
    > >> For a site on GD the "findit.asp" page displays
    something like this:
    > >>
    > >> The location of this page is:
    > >> d:\hosting\mysite\findit.asp
    > >> The location of my root directory is:
    > >> d:\hosting\mysite
    > >>
    > >> Now that you know the root directory location
    on their server, you can
    > >> figure out the path to your database.
    > >> Let's say that the folder your database is in
    is named _private, and
    it
    > >> happens to be in the root
    > >> directory along with your home page.
    > >>
    > >> Next, just add the database folder name
    (_private) and the database
    > >> inside's name (mydatabase.mdb) to the root
    directory location:
    > >>
    > >> d:hosting\mysite\_private\mydatabase.mdb
    > >>
    > >> That's your Data Source path.
    > >>
    > >> The connection string would look something like
    this:
    > >>
    > >> = "Provider=Microsoft.Jet.OLEDB.4.0;Data
    > >>
    Source=d:hosting\mysite\_private\mydatabase.mdb;User
    ID=;Password=;"
    > >>
    > >> (the code above may appear wrapped (two lines)
    in the forum/ng but it's
    > > one
    > >> line with no return within)
    > >>
    > >> IMPORTANT: If you are using a local testing
    server, make a copy of your
    > >> connection asp page as a backup.
    > >> The reason? The connection information you are
    going to put in this
    file
    > >> will only work on the host's server.
    > >> Once you upload the new connection.asp page
    with the changes for the
    > >> host,
    > >> you'll need to change your local copy back to
    your local connection so
    it
    > >> will work on
    > >> your local testing server.
    > >>
    > >> Upload to server.
    > >>
    > >> Please note: From now on, when you upload (or
    "put" if you're using DW)
    > >> files that refer to your connection asp page
    you're going to get a
    > >> warning
    > >> that your connection asp on the host is
    different than your local copy.
    > >> Always say "No" to updating it, or you'll
    replace the GD DSN-Less
    > > connection
    > >> with your local one.
    > >>
    > >>
    > >> Did you set the appropriate read/write
    permissions on the
    > > directory(folder)
    > >> your database is in?
    > >> You can do that in GD's control panel.
    Hosting> Select your site >
    Manage
    > > to
    > >> open it.
    > >>
    > >> I hope this helps.
    > >>
    > >> For what it's worth, I only use GD for domain
    names now.
    > >> I had numerous problems with some sites hosted
    there, switched them to
    > >> HostMySite and haven't had any.
    > >>
    > >> Take care,
    > >> Tim
    > >>
    > >>
    > >>
    > >>
    > >>
    > >> "Baxter" <baxter(RemoveThe
    :-)@gtlakes.com> wrote in message
    > >> news:[email protected]...
    > >> > Baxter - I get "Connection was Made
    Successfully" if connection to
    the
    > >> > database was made Successfully not sure
    what's going on here? When
    you
    > >> > look
    > >> > at your site files in Dreamwerer on the
    server is there a folder
    named
    > >> > access_db? If so is your data base in that
    folder? The database needs
    > >> > permissions set to read and write to that
    file. Have you checked
    > >> > permissions
    > >> > on the site? does GD give you a control
    panel so that you can set the
    > >> > permissions your self? I have never used
    GD but have seen where
    people
    > >> > have
    > >> > had lots of problems with them when using
    a scripting language. I
    don't
    > >> > know
    > >> > what else it could be at this point.
    > >> > Dave
    > >> > "mtrueblood"
    <[email protected]> wrote in message
    > >> > news:[email protected]...
    > >> >> Baxter - I get "Connection was Made
    Successfully" with the
    credentials
    > >> >> you
    > >> > gave
    > >> >> me. My site works just fine on my
    local machine with
    > > access_trueblood.dsn
    > >> > (it
    > >> >> also worked with the dsn I initally
    created for the site). All pages
    > >> > display
    > >> >> and I get no errors. I think where the
    issue may be, now I am
    guessing
    > >> > here, is
    > >> >> that my connection refrences a
    database located in the folder
    > >> >>
    C:\Users\Administrator\Websites\Sitename\access_db, but once I
    upload
    > > my
    > >> > site,
    > >> >> the database still sits in access_db,
    but the root folder possibly
    has
    > >> > changed
    > >> >> (maybe causing the connection to
    fail).
    > >> >>
    > >> >> Dooza - I don't understand how I can
    use "c:myDsnFile.dsn", when
    once
    > > I
    > >> > upload
    > >> >> my site, "c:myDsnFile.dsn" would then
    not be the location of my dsn.
    > >> >> "c:myDsnFile.dsn" refrences a file on
    my computer. I am using an
    > >> >> online
    > >> > hosting
    > >> >> company. Am I not understanding you
    correctly? See note above. I did
    > > use
    > >> > your
    > >> >> information and got the following
    browser error:
    > >> >>
    > >> >> Microsoft OLE DB Provider for ODBC
    Drivers error '80004005'
    > >> >> General error: Invalid file dsn ''
    > >> >> /sitename/contactus/index.asp, line
    130
    > >> >>
    > >> >> line 130 -
    rs_contactus.ActiveConnection = MM_connTrueblood_STRING
    > >> >>
    > >> >> I am researching on how to do a
    dsn-less connection, unless I can
    get
    > >> > this
    > >> >> figured out.
    > >> >>
    > >> >> Thanks - Matt
    > >> >>
    > >> >
    > >> >
    > >>
    > >>
    > >
    > >
    >
    >

  • Help with home page link

    Hi
    Does anyone can help me ?
    I created a web and now I am creating a second folder/ file. How can I link this second folder to the home page placed in first folder ?
    Sorry for my English

    Hi Cari
    Tanhks for you help.  This open my mind, you mean  I need to have two website to this ?
    I ask you this because I have only one website. the acces to my site is only through customer site. I mean I give him the right link  (one link for Company A and another link for company B, both coming from site), do you understand what I mean?
    The point I do not understan is if I save file web A, as  Web B and then I change page names, master and so on, and the I up load, why does muse overwrite in file A when pages are different name !!!!
    The point is Muse does not allow to copy / paste !!!
    Any idea Cari
    Regards from Buenos Aires
    Felix Cano Montoya
    [email protected]
    El 11/4/2015, a las 23:21, Cari Jansen <[email protected]> escribió:
    Help with home page link
    created by Cari Jansen <https://forums.adobe.com/people/Cari+Jansen> in Help with using Adobe Muse CC - View the full discussion <https://forums.adobe.com/message/7430081#7430081>
    I'm not sure I've got a grasp on the issue you are having but let me give it a try
    Website A is finished and you have uploaded it to the Internet, so it is LIVE.
    You make a copy of Website A, and call it Website B, then make all required changes.
    IF you uploaded Website B, then it is likely you will overwrite Website A. You must instead, upload Website B as a separate Website.
    To publish to a new site:
    Click Publish.
    Then click the expansion triangle left of Options.
    Change Publish To setting to New Site
    fill out rest of required details, and click OK to publish.
    You'll now have two separate web-sites.
    If you need to link between them, use absolute hyperlinks (the full URL).
    Hope this helps.
    If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7430081#7430081 and clicking ‘Correct’ below the answer
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7430081#7430081
    To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
    Start a new discussion in Help with using Adobe Muse CC by email <mailto:[email protected]> or at Adobe Community <https://forums.adobe.com/choose-container.jspa?contentType=1&containerType=14&container=47 61>
    For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624 <https://forums.adobe.com/thread/1516624>.

  • Urgent help with Pages 5.0 needed

    Hi guys,
    I need urgent help! I deleted Pages 5.0 (as I HATED it) but now can't open a very important document. Can someone please tell me how to reinstall it??
    Thanks
    Kellie

    Downloading again is not as easy as that. you must find the app in the "Purchased" section of the
    app store and I think you then must hold down the option key to reinstall it.
    BTW, I only worked with one document as a trial for Pages 5 and then imported it to Word and saved it. I then deleted Pages 5 (I can't believe anyone who works with software would think that piece of worthless junk would sufice for anyone who uses a word processor professionally), reopened the Word document and saved it in Pages 09.
    I hope this helps

  • Need urgent help with HSDIO hardware timing

    Hi everyone,
    I need urgent help regarding HSDIO hardware timing. I've been working in a project which generating serial ramp using HSDIO pxie device. 
    I'm using clock rate 40MHz and generating 14 bit of boolean for each step of ramp. And I have to generate simply 256 steps ramp.
    Which means, 256 (steps) x 14 (boolean array) x 25 ns (period of 1 boolean value) = 89,6 ns.
    What I'm doing right now is with using index of FOR loop as my input data (converting the index into 14bit boolean), then write into pxie device in every iteration,
    which means, my data is getting into output in every 1ms time, right? (I'm using windows)
    And I want to be able to generate faster than that. 
    How can I prewrite my 256 steps ramp, then write them all at once into pxie device. I'm really stuck here.
    In the picture can you see how I do the write into device in every iteration of FOR Loop.
    Regards,
    Yan.

    hi, thanks for responding.
    with using example of dynamic generation with script, I can manage to generate the ramp with controllable delay (generate the whole waveform, including delay with script command, then write to the card).
    But I still have 1 question, I can test the output of the generation using oscilloscope and cant see the start delay (I'm writing delay at the start, before generating the ramp). My signal generated at 0 sec.
    How can I check this start delay? is there any good example delivered with Labview to check this generation? Somehow I cant use the "dynamic generation and acquisition" example to see my generation (cant figure out how to capture the generated signal).
    regards,
    Yan.

  • Need urgent help with exporting movie

    I have a simple 7-minute project on FCP 7 that consists of still images from the internet and hand drawn images with a few animated elements.
    It has only one audio track and two video tracks. I am using PAL DV size format. I am in the UK.
    I exported it using quicktime conversion with H264 compression and good quality and the final file size was 125MB.
    My urgent problem is that I need to upload this file to a university website for an online course in two days, and their file size limit is 50 MB.
    I need to make sure that the teacher can play the file, and I need to get it down to a smaller file size for uploading.
    I have tried all sorts of exporting from FCP. I tried avi, m4v (the setting said ipod and it produced the m4v file), and quicktime mov at different sizes like 1/4vga size. The best file size was 29 mb for the m4v ipod export, and 98mb for the qt mov file exported at medium quality. The avi file grew to 1.2gb!
    I don't know if the m4v file is playable on the system that the teacher uses (she is on a windows computer).
    Can anyone please give me some specific advice on how to create a smaller video file that is more universally compatible?
    I have access to all of the FCP 7 suite and the Adobe CS6 suite which includes Premiere Pro, Prelude and Adobe Media encoder, if that helps.
    Thanks a lot for any advice.

    Jonathan Rooper wrote:
    Hi Luis
    The advice you've been given is good for helping you to get a good quality video at a reasonable file size.
    But it may be worth thinking more about which format will certainly play on your teacher's PC.  The most likely player on any PC is Windows Media Player, which tens to be installed by default.
    The most likely video to be viewed on a PC is one from YouTube...  andH.264 is supported on all "modern" PCs.  QuickTime Player is free and very available.
    A disadvantage for Mac users is that yoou'll ned the Flip4Mac plugin to create WMV movies.  I think the cheapest paid version of Flip4Mac costs around £30. 
    All you need on a Mac fis the free Flip4Mac player.
    If you get that, and choose the web high I quality setting, you should have a file within 50MB that plays reliably and looks OK.  (A cheaper way of doing this, if you have access to a PC, is to use the free Windows Media Encoder).
    Best of luck
    Jonathan

  • Need urgent help with Ifs1.1 on Solaris

    We have installed IFS 1.1 with Oracle 8.1.7 on a three tier System (two Suns). We use JWS as WebServer. When we start IFS and JWS everything seems to work fine. But after some time (irregulary) we are not able to contact the JSP-Sites via a bowser. After restarting JWS, everything works fine for some time.
    Sometimes it happens (about one times a day), that the whole JWS crashes (JWS-Admin doesn't work). So we have to restart the whole IFS.
    What can be the problem? We need urgent help, because the deadline for our project is Wednesday.
    By the way:
    Where do I have to start CTX on the IFS- or the Oracle-Side?
    null

    Yes, we tried the Oracle HTTP - Server, but we weren4t able to get it to work. We didn4t get our JSP-Files to work with it. But that is another issue. I think it4s not a problem of JWS, but IFS.
    Additionally it is strange, that we are still able to connect to the database via SqlPlus.
    IFS works fine for about 15 minutes, than it crashes, nothing works anymore. We found following errors in the IfsAgents.log:
    maybe it can help?!
    Mon Dec 04 23:12:20 CET 2000
    Server STARTED: IfsAgents(19944) not managed
    Attempting to load agent EventExchangerAgent
    Agent EventExchangerAgent loaded
    Server STARTED: IfsProtocols(19945) not managed
    Attempting to start agent EventExchangerAgent
    EventExchangerAgent: Start request
    Agent EventExchangerAgent started
    Attempting to load agent ExpirationAgent
    Agent ExpirationAgent loaded
    EventExchangerAgent: starting timer
    Attempting to start agent ExpirationAgent
    ExpirationAgent: Start request
    Agent ExpirationAgent started
    Attempting to load agent GarbageCollectionAgent
    Agent GarbageCollectionAgent loaded
    ExpirationAgent: computed initial delay (in ms) is: 10024504
    ExpirationAgent: starting timer
    Attempting to start agent GarbageCollectionAgent
    GarbageCollectionAgent: Start request
    Agent GarbageCollectionAgent started
    Attempting to load agent ContentGarbageCollectionAgent
    Agent ContentGarbageCollectionAgent loaded
    GarbageCollectionAgent: computed initial delay (in ms) is: 11816890
    GarbageCollectionAgent: starting timer
    Attempting to start agent ContentGarbageCollectionAgent
    ContentGarbageCollectionAgent: Start request
    Agent ContentGarbageCollectionAgent started
    Attempting to load agent DanglingObjectAVCleanupAgent
    Agent DanglingObjectAVCleanupAgent loaded
    ContentGarbageCollectionAgent: starting timer
    Attempting to start agent DanglingObjectAVCleanupAgent
    DanglingObjectAVCleanupAgent: Start request
    Agent DanglingObjectAVCleanupAgent started
    Attempting to load agent OutboxAgent
    Agent OutboxAgent loaded
    DanglingObjectAVCleanupAgent: computed initial delay (in ms) is: 5500105
    DanglingObjectAVCleanupAgent: starting timer
    Attempting to start agent OutboxAgent
    OutboxAgent: Start request
    Agent OutboxAgent started
    Attempting to load agent ServiceWatchdogAgent
    Agent ServiceWatchdogAgent loaded
    OutboxAgent: Done processing
    Attempting to start agent ServiceWatchdogAgent
    ServiceWatchdogAgent: Start request
    Agent ServiceWatchdogAgent started
    Attempting to load agent QuotaAgent
    Agent QuotaAgent loaded
    ServiceWatchdogAgent: Initializing ServerWatchdogTable with 9 entries
    ServiceWatchdogAgent: starting timer
    Server STARTED: FtpServer(20082) managed by IfsProtocols(19945)
    ServiceWatchdogAgent: New Server being watchdogged
    Attempting to start agent QuotaAgent
    QuotaAgent: Start request
    Agent QuotaAgent started
    QuotaAgent: starting timer
    Server STARTED: CupServer(20124) managed by IfsProtocols(19945)
    ServiceWatchdogAgent: New Server being watchdogged
    Server STARTED: ImapServer(20130) managed by IfsProtocols(19945)
    ServiceWatchdogAgent: New Server being watchdogged
    Server STARTED: SmtpServer(20150) managed by IfsProtocols(19945)
    ServiceWatchdogAgent: New Server being watchdogged
    ServiceWatchdogAgent: Unlocked Server Detected in checkServer
    ServiceWatchdogAgent: Unlocked Server Detected in checkServer
    ServiceWatchdogAgent: Unlocked Server Detected in checkServer
    ServiceWatchdogAgent: Unlocked Server Detected in checkServer
    ServiceWatchdogAgent: Unlocked Server Detected in checkServer
    ServiceWatchdogAgent: Unlocked Server Detected in checkServer
    ServiceWatchdogAgent: Unlocked Server being investigated
    ServiceWatchdogAgent: Unlocked Server being investigated
    ServiceWatchdogAgent: Unlocked Server being investigated
    ServiceWatchdogAgent: Unlocked Server being investigated
    ServiceWatchdogAgent: Unlocked Server being investigated
    ServiceWatchdogAgent: Unlocked Server being investigated
    ServiceWatchdogAgent: Freeing unlocked server 19687
    ServiceWatchdogAgent: Freeing unlocked server 19666
    Server STOPPED: CupServer(19687) managed by IfsProtocols(19519)
    ServiceWatchdogAgent: Freeing unlocked server 19723
    ServiceWatchdogAgent: Freeing unlocked server 19520
    Server STOPPED: FtpServer(19666) managed by IfsProtocols(19519)
    Server STOPPED: SmtpServer(19723) managed by IfsProtocols(19519)
    ServiceWatchdogAgent: Freeing unlocked server 19519
    Server STOPPED: IfsAgents(19520) not managed
    ServiceWatchdogAgent: Freeing unlocked server 19712
    Server STOPPED: IfsProtocols(19519) not managed
    Server STOPPED: ImapServer(19712) managed by IfsProtocols(19519)
    ServiceWatchdogAgent: Freed Server removed from watchdog list
    ServiceWatchdogAgent: Freed Server removed from watchdog list
    ServiceWatchdogAgent: Freed Server removed from watchdog list
    ServiceWatchdogAgent: Freed Server removed from watchdog list
    ServiceWatchdogAgent: Freed Server removed from watchdog list
    ServiceWatchdogAgent: Freed Server removed from watchdog list
    QuotaAgent: Timer event: 0 active; 0 exceeded
    ContentGarbageCollectionAgent: Freed 5 unreferenced ContentObjects
    QuotaAgent: Timer event: 0 active; 0 exceeded
    ServiceWatchdogAgent: IfsException publishing timer details:
    ServiceWatchdogAgent: oracle.ifs.common.IfsException: IFS-11012: Unable to get events from other services
    java.sql.SQLException: ORA-03114: not connected to ORACLE
    ServiceWatchdogAgent: IfsException in checkForDeadServices():
    ServiceWatchdogAgent: oracle.ifs.common.IfsException: IFS-10651: Unable to begin transaction
    oracle.ifs.common.IfsException: IFS-10603: Unable to set database savepoint
    java.sql.SQLException: ORA-03114: not connected to ORACLE
    ServiceWatchdogAgent: IfsException in handle loop; continuing:
    ServiceWatchdogAgent: oracle.ifs.common.IfsException: IFS-10651: Unable to begin transaction
    oracle.ifs.common.IfsException: IFS-10603: Unable to set database savepoint
    java.sql.SQLException: ORA-03114: not connected to ORACLE
    ServiceWatchdogAgent: IfsException publishing timer details:
    ServiceWatchdogAgent: oracle.ifs.common.IfsException: IFS-10651: Unable to begin transaction
    oracle.ifs.common.IfsException: IFS-10603: Unable to set database savepoint
    java.sql.SQLException: ORA-03114: not connected to ORACLE
    ServiceWatchdogAgent: IfsException publishing timer details:
    ServiceWatchdogAgent: oracle.ifs.common.IfsException: IFS-10651: Unable to begin transaction
    oracle.ifs.common.IfsException: IFS-10603: Unable to set database savepoint
    java.sql.SQLException: ORA-03114: not connected to ORACLE
    ServiceWatchdogAgent: IfsException publishing timer details:
    ServiceWatchdogAgent: oracle.ifs.common.IfsException: IFS-10651: Unable to begin transaction
    oracle.ifs.common.IfsException: IFS-10603: Unable to set database savepoint
    java.sql.SQLException: ORA-03114: not connected to ORACLE
    ServiceWatchdogAgent: IfsException publishing timer details:
    ServiceWatchdogAgent: oracle.ifs.common.IfsException: IFS-10651: Unable to begin transaction
    oracle.ifs.common.IfsException: IFS-10603: Unable to set database savepoint
    java.sql.SQLException: ORA-03114: not connected to ORACLE
    ServiceWatchdogAgent: IfsException publishing timer details:
    ServiceWatchdogAgent: oracle.ifs.common.IfsException: IFS-10651: Unable to begin transaction
    oracle.ifs.common.IfsException: IFS-10603: Unable to set database savepoint
    java.sql.SQLException: ORA-03114: not connected to ORACLE
    null

  • Need some URGENT help with 3 DVD mastering issues PLEASE! :

    Hi there,
    Firstly, I am running DVD SP 3.0.2 on Mac OS 10.4.7 on a G5 Dual 2 GHz 3Gb Ram plenty of HD space...
    I am creating a DVD with: An intro sequence, a main menu, 4 sub menus, and 4 sections with around 12 chapters each.
    I am having some big problems, and a pretty stuck. I will lest them separately below, numbered. If you are able to help, please refer clearly to which number you are helping with. Any help is MUCH appreciated! Many thanks!!
    1. Each of the 5 menus (1 main, 4 sub) have a background video, and a separate audio track. I added the background videos by simply dragging them to the assests panel, then from there onto the menu editor window. They are created in FCP and are properly encoded. However, when I click the motion button, or use the simulator, the videos do not show up. The music plays, but all i see is plain black.
    What is going on?!?!?!
    2. I am really struggling with rollover buttons. I have custom created buttons, and I wand them to have a soft red glow around them when hovered over. HOW ON EARTH DO I ACTUALLY DO THIS??
    The buttons are in photoshop so can be exported with/without background/glow in any format.
    3. Is it possible, once I have got the above rollover working, to have an image to the right hand side of my buttons which changes with the the button rollover. i.e. hover over button 1, see image 1. hover over button 2, image changes to image 2.
    PLEASE PLEASE give any help you can, I have a deadline coming up and am quite stumped. Thanks again!!

    I am still having problems regarding issue Number 1. PLEASE ANYONE HELP?!
    Sorry, I'm not sure about the motion menus. I avoid those whenever possible. But you might click on the menu in the storyline tab (whatever it's called -- the hierarchical view with the disc, tracks, slideshows, etc.) and look at the properties and see if there's anything you have to enable specifically for motion. And be sure the motion button is on on the main display/preview area, but it sounds like you already know how that works.
    For your information, here is a screen grab of the menu I am trying to create:
    http://www.redhavoc.co.uk/stuff/menu.jpg
    I think it is obvious that when a button is hovered over, I want it to glow red, and the image to the right will change to match the respective button.
    IS THIS GOING TO BE POSSIBLE????
    Yes.
    First, your menus have to be layered menus. Unfortunately, there's no way to convert non-layered menus to layered menus, so if you already have non-layered, you'll have to just delete them and create new layered menus. The button (and menu item) to create a layered menu should be right by the normal new-menu item.
    Next, the graphical work is all in Photoshop.
    Side tip: You may already know this, but I found it's best to use 640x480 for the Photoshop document. When I do text and leave it as a text object in the Photoshop file, it resizes poorly in DVDSP. So this ends up being another 720x480 vs. 640x480 square/rectangular pixel conversion thing. DVDSP plays in the 640x480 world, at least as far as the designer can see. So I keep my images at 640x480, and it doesn't have to resize, and everything looks right.
    Moving on... Set up your basic background, the part that won't change (or will have other things covering it, like for your square image).
    Then put in all the buttons and images you'll be using, each part in a separate layer. This could have fifteen buttons (you have five buttons, and there can be three versions for each -- inactive, selected, and activated versions) and five or six square images (you said one for each button, and you might want a blank default if, say, you want to add a "back" button on the menu and want some blank or default image for the square when they're on the "back" button).
    Sometimes people don't bother with a separate "active" button state, but you usually want some visual feedback that they clicked the button. Also, I usually just build the default (unselected) button into the background; that's less hassle later on, and it will just draw the selected or activated buttons over that when the user is on that button.
    Line up all your buttons and images. All the square images lined up perfectly on top of each other, all the buttons in the right places (so you'll have three buttons stacked on top of each other in each spot). Give each layer a short but quickly recognizable name, and line them up in a consistent order. (button1-default, button1-selected, button1-active, button1-squarepicture, then button2-default, ... etc.) Photoshop and DVDSP don't care, but it makes it easier for you later.
    Note that earlier versions of DVDSP won't show Photoshop layer effects. (They handle layers, just not the effects, like inner glow, outer bezel, etc.) I don't remember when they changed this, but I think it was version 4.something. So if you're using that method to make your buttons glow, you may have to flatten each selected or active button layer, and you may even need to create a dummy blank layer underneath it first to give it something to flatten onto.
    Save the file as a standard Photoshop file (.psd). Drag the file onto your DVDSP layered menu and set it as the background.
    Now, in DVDSP, create all your buttons. Just drag boxes over/around the button pictures you have. Feel free to make them extra-big; users won't see the actual area you've selected, and bigger areas makes it easier for people to hit them if they're using a mouse on a computer to watch the DVD. You can point the buttons to their targets now if you want, and set the end jumps on the tracks if you want. (I tend to set the end jumps on the tracks so they automatically select the button for the next track.)
    Now's the fun part, since it will actually hook everything up and should be easy if your naming layer order were consistent. Click on the layered menu (in that hierarchical view) and look at the properties window. (Sorry I can't remember the technical names for all these windows; I'm doing this all from memory. So feel free to ask more questions if you can't find what I'm talking about.) One of the properties tabs should have a grid of checkboxes with a list of your layers. Make sure the background is checked for all of the states. Then check the layers you want to show for each button state, as well as the corresponding square image to show for each.
    Again, I'm doing this from memory, and I can't remember exactly how things are listed in that grid. But I remember it keeps your layers in the same order you put them in the Photoshop file and shows you those names, so it should make it easy to go down the list and check the right boxes.
    And another side tip: You can update the Photoshop file, but once you've put it in DVDSP, if you change the layer order, it will screw up the check boxes you checked. It always shows you the layer names correctly, but it keeps the checkboxes in DVDSP simply assigned to the layer number, so the fifth layer will keep the same checkboxes even if you juggle them so some other layer is now the fifth layer. So if you do juggle the layers in Photoshop, go back and fix the checkbox list in DVDSP.
    I put a sample Photoshop file based on yours in
    http://dan.black.org/layered-menu-sample.psd
    It's quick and dirty, but shows the layer layout, and you should be able to drop it on DVDSP to play with. (I also won't leave it there forever, maybe a few weeks, so anybody reading this in a month or more probably will get a 404 for that url.)
    Again, doing this from memory, so feel free to ask if anything doesn't work or doesn't make sense.
    G4/dual867   Mac OS X (10.4.5)   2GB/0.8TB

  • Need urgent help with database startup

    dear all,
    i am using oracle 10g on windower server 32 bit.
    i try to startup my database today, and it give me error, and it is my production database,
    i need very urgent help from you.(i have no rman backup , and the data is not so necessory, since it is for student practice.)
    SQL> startup open
    ORACLE instance started.
    Total System Global Area  524288000 bytes
    Fixed Size                   790180 bytes
    Variable Size             250343772 bytes
    Database Buffers          272629760 bytes
    Redo Buffers                 524288 bytes
    Database mounted.
    ORA-01110: data file 34: 'G:\ORACLE\DATAFILES_ACADEMY\ACADEMY'
    ORA-01115: IO error reading block from file 34 (block # 1)
    ORA-27070: async read/write failed
    OSD-04016: Error queuing an asynchronous I/O request.
    O/S-Error: (OS 23) Data error (cyclic redundancy check).regards.

    Maahjoor wrote:
    Hi dears,
    i need further assistance from your side, i have restarted the server, but the same problem.
    as there a way to drop and re-create a system tablespace? since the file 34 belong to system tablesapce.
    regardsNo.
    So just create a new database. That will take all of ten minutes. And tell your students to create new tablespaces. That will take them two minutes.

  • Need urgent help with the query - Beginer

    Hello - I need help with a query to populate data in a table.Here is the scenario.
    Source1
    MnthID BranchCod CustID SegCode FXStatus ProfStatus Profit
    200712 B1 C1 20 Y Y 100
    Source2
    MnthID BranchCod CustID ProdCode ProdIndex
    200712 B1 C1 12 1
    200712 B1 C2 12 0
    Destination
    MnthID BranchCod SegCode ProdCode CountSegCust CountProdCust ProfitProdCust
    Condition and Calculations:
    1)Source1 customer are base customers.If Source2 has customers who is not in source1 then that customer's record should not be fetched.
    2)SegCode, FX Status, ProfStatus is one variable in destination table. [ SegCode = SegCode+ FXStatus (if FXStatus = Y)+ ProfStatus (if FXStatus = Y) ]
    3)CountSegCust = CountCustID Groupby MnthID,BranchCod,SegCode Only.
    4)CountProdCust = CountCustID Groupby MnthID,BranchCod,SegCode,ProdCode (when ProdIndex = 1)
    5)ProfitProdCust = Sum of Profit of Customers Groupby MnthID,BranchCod,SegCode,ProdCode (when ProdIndex = 1)
    Apologies for bad formatting.
    Thanks in advance!!

    A total guess indeed.
    It's not clear whether some aggregation can be done (summing counts of grouped data might cause some customers being counted more than once)
    insert into destination
    select mnthid,branchcod,segcode,prodcode,countsegcust,countprodcust,profitprodcust
      from (select s1.mnthid,
                   s1.branchcod,
                   s1.segcode || case s1.fxstatus when 'Y' then s1.fxstatus || s1.profstatus end segcode,
                   s2.prodcode,
                   count(s1.custid) over (partition by s1.mnthid,
                                                       s1.branchcod,
                                                       s1.segcode || case s1.fxstatus when 'Y' then s1.fxstatus || s1.profstatus end
                                              order by null
                                         ) countsegcust,
                   count(case proindex when 1
                                       then custid
                         end
                        ) over (partition by s1.mnthid,
                                             s1.branchcod,
                                             s1.segcode || case s1.fxstatus when 'Y' then s1.fxstatus || s1.profstatus end
                                             s2.prodcode
                                    order by null
                               ) countprodcust,
                   sum(case proindex when 1
                                     then profit
                       end
                      ) over (partition by s1.mnthid,
                                           s1.branchcod,
                                           s1.segcode || case s1.fxstatus when 'Y' then s1.fxstatus || s1.profstatus end
                                           s2.prodcode
                                  order by null
                             ) profitprodcust,
                   row_number() over (partition by s1.mnthid,
                                                   s1.branchcod,
                                                   s1.segcode || case s1.fxstatus when 'Y' then s1.fxstatus || s1.profstatus end
                                                   s2.prodcode
                                          order by null
                                     ) the_row
              from source1 s1,source2 s2
             where s1.mnthid = s2.mnthid
               and s1.branchcod = s2.branchcod
               and s1.custid = s2.custid
    where the_row = 1Regards
    Etbin

  • Help with display settings needed urgently

    Graphics and icons that are supposed to be round appear oval. For instance the Safari and App icons on the dock appear very oval. Logos on websites I've visited before and I know are round appear oval.
    I've tried all display settings and nothing helps. I'm a designer and this is causing a major hinderance. Everything appears condenced / squashed sideways. I'd be very grateful if someone could help with this.
    I've just purchased the laptop. I have been using Mac for a few years and I've always selected the "stretched" option from the Display settings which sorted out the problem completely. A circle looked a proper circle. But in this version the option is not available.
    Badly hoping someone can help with this.
    Thanks.
    Version Details - OS X Lion 10.7.4

    It sounds like you have selected an incorrect resolution.  For starters, are you talking about your Air's display or an external display?  You haven't said which Air you have.  If you have an 11" model, make sure your display resolution is set to 1366x768.  If you have a 13" model, it should be set to 1440x900.  These are the proper resolutions for the built in displays.  Chosing anything other than the referenced "native" display resolutions will result in distortions or clarity problems. 

  • Need urgent help with communicating with the HP 4155B analyser with Labview

    i folks,
    I'm currently trying to communicate with our HP 4155B semiconductor pamaremter analyser.  I do not have experience with GPIB yet. I have installed the NI VISA.
    I was wondering if anyone could help with getting me started on how to start communicating with the device using Labview.
    I'm not certain where to start.
    Kind regards
    Rob

    Hi,
    Thanks for the help. I now have communication with the instrument.
    I was wondering if it's possible to to setup a data measurement (I-V Sweep) and be able to read the measurement data in realtime as it is being measured. So I basically see the graph updating itself on the PC during the measurement.
    Is this possible? Could anyone give advice on how I can go about this or are there any examples that can help me understand how to do this?
    I'm not completely sure how to initialise the instruemnt for communication and handle VISA WRITEs and READs. within LabView
    Best regards
    Rob

  • Urgent help with simple BPEL process for reading data from database

    Hello there,
    I need help with BPEL project.
    i have created a table Employee in Database.
    I did create application, BPEL project and connection to the database properly using Database Adapter.
    I need to read the records from the database and convert into xml fomat and it should to go approval for BPM worklist.
    Can someone please describe me step by step what i need to do.
    Thx,
    Dps

    I have created a table in Database with data like Empno,name,salary,comments.
    I created Database Connection in jsp page and connecting to BPEL process.
    It initiates the process and it goes automatically for approval.
    Please refer the code once which i created.
    <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"
    "http://www.w3.org/TR/html4/loose.dtd">
    <%@page import="java.util.Map" %>
    <%@page import="com.oracle.bpel.client.Locator" %>
    <%@page import="com.oracle.bpel.client.NormalizedMessage" %>
    <%@page import="com.oracle.bpel.client.delivery.IDeliveryService" %>
    <%@page import="javax.naming.Context" %>
    <%@page import="java.util.Hashtable" %>
    <%@page import="java.util.HashMap" %>
    <%@ page import="java.sql.*"%>
    <%@ page import= "jspprj.DBCon"%>
    <html>
    <head>
    <title>Invoke CreditRatingService</title>
    </head>
    <body>
    <%
    DBCon dbcon=new DBCon();
    Connection conn=dbcon.createConnection();
    Statement st=null;
    PreparedStatement pstmt=null;
    Hashtable env= new Hashtable();
    ResultSet rs = null;
    Map payload =null;
    try
    env.put(Context.INITIAL_CONTEXT_FACTORY, "com.evermind.server.rmi.RMIInitialContextFactory");
    env.put(Context.PROVIDER_URL, "opmn:ormi://localhost:port:home/orabpel");//bpel server
    env.put("java.naming.security.principal", "username");
    env.put("java.naming.security.credentials", "password");//bpel console
    Locator locator = new Locator("default","password",env);
    IDeliveryService deliveryService =
    (IDeliveryService)locator.lookupService(IDeliveryService.SERVICE_NAME );
    // construct the normalized message and send to Oracle BPEL Process Manager
    NormalizedMessage nm = new NormalizedMessage();
    java.util.HashMap map = new HashMap();
    st=conn.createStatement();
    out.println("connected");
    String query1="Select * from EMPLOYEE";
    rs=st.executeQuery(query1);
    /*reading Data From Database and converting into XML format
    so that no need of going to BPEL console and entering the details.
    while (rs.next()){
    String xml1 = "<AsynchBPELProcess1ProcessRequest xmlns='http://xmlns.oracle.com/AsynchBPELProcess1'>"+
    "<Empno>"+rs.getString(1)+"</Empno>"+
    "<EmpName>"+rs.getString(2)+"</EmpName>"+
    "<Salary>"+rs.getString(3)+"</Salary>"+
    "<Comments>"+rs.getString(4)+"</Comments>"+
    "</AsynchBPELProcess1ProcessRequest>";
    out.println(xml1);
    nm.addPart("payload", xml1 );
    // EmployeeApprovalProcess is the BPEL process in which human task is implemented
    deliveryService.post("EmployeeApprovalProcess", "initiate", nm);
    // payload = res.getPayload();
    out.println( "BPELProcess CreditRatingService executed!<br>" );
    // out.println( "Credit Rating is " + payload.get("payload") );
    //Incase there is an exception while invoking the first server invoke the second server i.e lsgpas13.
    catch(Exception ee) {
    //("BPEL Server lsgpas14 invoking error.\n"+ee.toString());
    %>
    </body>
    </html>
    Its working fine.And i want it for Bulk approvals.please help me step by step procedure if any other way to implement this.

  • Urgent Help with Planning Book

    Hello Gurus,
    Need your help with a very urgent issue. I cannot see my key figure values in my planning book(Interactive Planning). I could sucessfully generate my CVC, then initialised my planning area. Then when I go the interactive planning I can see all my characteristics -Ex Material master( has all values), Prod type has values, etc. Iam in DEV system and have to move the whole config to QA now. I have to validate that the config works in QA. Its works ok in the sandbox but I cannot figureout why I can not see the values for key figs that Iam loading from a Flat File. Please help!!!!!!

    Hello Suresh,
    I have one more question for you. Let me tell you my scenario. I have the client giving me a rough forecast for the future. I have to do stat forecast based on the history and check that against the initial forecast given by them. But, the problem I realised now is that when I go to my planning books I can see the values for 2008 in mothly buckets since I have 0calmonth. But the client gave me another file with forecast for 2008 in monthly buckets and for 2009 and 2010 in quarter buckets. So, i have a planning buck profile defined to meet that but, how do I upload the file with both 0calmonth and 0calquarter in a single file. Please let me know!! Urgent task.
    Thanks again,
    Chinna.

  • Urgent Help with network access to FileOutputStream

    URGENT HELP NEEDED GUYS...I am stuck on this past 2 days. I tried several alternatives but to vain.
    I am trying to access a Folder on a user's computer which is lying in a different Domain.
    For accessing this folder, I have the following information with me.
    Domain name, PC name, folder name, windows username, windows password.
    Note: This username and password will give me rights to read + write to that folder.
    How to use these information to open a fileoutputstream ? Does the java.io package allow programs to pass a username, password , domainname, pcname and then the folder and filename to create/read/write files..
    Pls. suggest code examples. Sometime back I posted this query but didnt get an answer to my satisfaction. I have tried at my end but unsuccessful yet. Help would be appreciated.
    I am trying this on a Windows File System and Network domain
    THIS IS V. URGENT
    Thanks,

    Hi HJK,
    I am referring to the last reply of yours.
    " Hi, there are three approaches I can think of offhand:
    1) make sure the user-context under which you run the java app has the right to access the remote drive.
    2) Do the network connection in a batch or c program and call that at the start of your java app with Runtime#exec.
    3) Write some c/c++ code to open the connection and integrate that via JNI.
    Let me know what (other) solution you came up with in the end!
    Regarding the 1st.
    I am supposed to write a remote installation utility actually. There are around 200 PC(s) in a network on which I need to copy these java class files. My problem statement is such that at runtime I only have username, passwords, domain access. I am not supposed to map any drives. Its supposed to be done dynamically. No manual intervention required. :(
    How do I do the network connection in a batch mode ? Let me know that?
    If 2nd option can be done, probably I can think of action-3 at the moment I am quite blurr :(

Maybe you are looking for

  • Any1 else having problems after 5.1 upgrade?

    My ipad1 is running slow and a number of apps (both apple and third party) are crashing regularly. Is it,possible to back the upgrade out? Don't know what else to do. Thanks! Jim

  • My disk utilitys is not working

    Everytime I click on disk utilitys it opens in the dock and it closes. I will want to know what does the disk utilitys Application run on. If someone could tell me what does the disk utilitys run on.

  • How to enter a C EOF character in terminal

    I already searched and went to this thread here which has been archieved... http://discussions.apple.com/thread.jspa?messageID=5069197&#5069197 It says EOF can be entered using ctrl-d but that doesn't seem to end the input stream. my code is as follo

  • Document Rows cannot be closed concurrently with the other modifications

    Dear all, We are trying to clear a small backlog of open Sales Orders in SAP. There are few rows in the Sales Orders which have remained open because of undelivered quantities. We are trying to close these rows. In most cases, the complete sales orde

  • Server connection interrupted

    I have an iMac, running Mavericks 10.9.2, connected (wired) to a Netgear ReadyNAS 10400.  For the last couple of weeks I struggle to copy files or folders from the iMac to the ReadyNAS.  It starts to copy, but after a while it shows "Server connectio