Urgent help with memory issue (ORA-04031)

Hi Geeks,
Came Across this below error in alert log in of our databases. Interestingly this error only pops up while the database backup runs. Below are the memory parameters.
memory_max_target big integer 14G
memory_target big integer 13G
pga_aggregate_target big integer 0
sga_target big integer 0
shared_pool_reserved_size big integer 192M
shared_pool_size big integer 0
ORA-04031: unable to allocate 5792 bytes of shared memory
("shared pool","unknown object","sga heap(1,1)","ges resource ")
Errors in file /apps/opt/oracle/diag/asm/+asm/+ASM1/trace/+ASM1_lmd0_14123.trc
I have tried specifying a value to shared_pool_size but with no luck..!! Pls help. I am not sure how to resolve this.

Hi, ORA-4031 in this case can be caused by unrestricted growth of the PGA, thus forcefully reducing the SGA.
We've had this in the past also.
The solution is in older versions to increase the shared_pool_size as you mentioned but with ASMM, this is no longer an option. You can however retrict the growth of the PGA by setting SGA_TARGET.
On our system this now looks like:
SQL> show parameter _target
NAME                                 TYPE                 VALUE
db_flashback_retention_target        integer              1440
memory_max_target                    big integer          10G
memory_target                        big integer          10G
pga_aggregate_target                 big integer          0
sga_target                           big integer          8GSee how we in fact set the max growth of the PGA to 2Gb ( 10Gb - 8Gb)
Try this and see if ot works for you also
Success!!
FJFranken

Similar Messages

Help with memory issue - abap memory vs roll area

Hi experts,
with our customer we are using TRM and WebDynpro technology to process Tax forms. We have portal integration. Recently due to performance reasons we were forced to analyze memory consumption and actually we are unable to understand what is happening. In memory inspector we can see much higher total memory than for ABAP total.
For Example, running simple application for form bundle search will produce following memory consumptions:
We do not understand why the Total section is + 12 MB when all ABAP code is just 7 MB?
Another example - opening of a form bundle (FB) leads to cca 32 MB consumption (no matter what type of FB we are opening). Visiting all pages of FB leads to 52 MBs (specific FB, this depends on FB type). Again, when we invoke memory inspector a lot of memory is in Roll Area.
This look like roll area is almost always twice as big as the actual ABAP Application.
Please any suggestions what is happening?
May be just the misunderstanding of roll area. To our knowledge roll area is the area of the internal session managed by memory manager (usually mostly created by extended memory). But why is this area so large when the actual application needs half of the space?
Some discussion suggests that this is due many dead objects released when memory inspector is started. But why is this space still available to the application and not put back to the extended pool? Is there any way how to identify those dead objects?
Thanks a lot

Hi, ORA-4031 in this case can be caused by unrestricted growth of the PGA, thus forcefully reducing the SGA.
We've had this in the past also.
The solution is in older versions to increase the shared_pool_size as you mentioned but with ASMM, this is no longer an option. You can however retrict the growth of the PGA by setting SGA_TARGET.
On our system this now looks like:
SQL> show parameter _target
NAME                                 TYPE                 VALUE
db_flashback_retention_target        integer              1440
memory_max_target                    big integer          10G
memory_target                        big integer          10G
pga_aggregate_target                 big integer          0
sga_target                           big integer          8GSee how we in fact set the max growth of the PGA to 2Gb ( 10Gb - 8Gb)
Try this and see if ot works for you also
Success!!
FJFranken

New to Oracle - could really use help with memory configuration

I'm new to Oracle and am assuming the support role on a system that is using Oracle 8.1.7 as the database server and need help with memory configuration.
The server is being used with FileNet and we're having issues while trying to purge logs (purge never completes) and the disk drive activity LED is on almost solid. My guess is is that it's not using enough/doesn't have enough memory therefore constantly reading off the disk and going too slow to finish the purge between nightly backups in which the database service is stopped.
The server is running on Windows 2000 Server SP4, has 1G of RAM and is dual-Xeon processor.
Any help or starting point references would be greatly appreciated.

Hi ...
You can use a StatsPack for guess the best distribution memory with your DB needs.
See metalink Note:228913.1
Regards

Question for those with memory issues on k8n neo plat

I have been having issues with my memory on the k8n neo platinum board since i built the system last month and i just recently discovered a fact I had overlooked.
I Have discovered that if i test the system while it is cool (having sat turned off overnight for example), then memtest will pass the ram just fine and the system will be stable for a short period of time, generally longer if no intensive applications are used, ie. doom3 vs. websurfing).
This system, once it heats up ( seems mostly to be the nvidia 3 nb that needs to be "hot"- that is, a probe placed in contact with the module reaches about 58+ degrees c) then the system becomes unstable and memtest, if used, fails.
Prime95, if used on it when its cool, will usually take about an hour or so to fail, but if its used on the system when its been running a bit ( temps from nb at 58c+ and memory module hot to the touch) then it fails after about 20-30 seconds.
I have placed an active hs on the nb in an attempt to correct this, but temps still remain high with failures occuring.
I have spent the better part of three days testing the sytem this way and the above facts have held true in all these tests.
I have tested at stock ratings ( not using "auto" in bios, but using "approved ratings" of 10 x 200 for fsb and timings of 2-3-3-7 for my ram at 1:1 (which is recommended as well) since i am testing for base stability at this point;Voltages have been left at auto settings, however.
I was wondering if anyone else with memory issues could try this out and post if this seems to be the case for you as well.
Perhaps the memory issues on these boards are directly related to a problem with the nvidia 3 chipset running too hot?
Does anyone have a memory issue with these boards who is using water cooling on the NB ?
Lack of issues from people using 'problem" memory, but having no failures with water cooled nb's would support my assumption.

Yes i did mean chipset.
I am using a stock hs/fan from amd, which seems to run a tad hot but, considering that I wont overclock until I can get board stable, its not an issue. (runs 35-40 idle and up to 72 intensive). I need the warranty more then the extra mhz at present.
I removed the stock heatsink from the nvidia chipset and bought a generic chipset cooler (green, very little in the way of fins and seems to be aluminum) with a small fan.
I used a generic silver paste from Compusa to adhere both the cpu hs and the chipset.
I didnt lap either hs, just installed each as per instructions on artic silvers website (figured it had to go on the same way even generic).
I also bought a kingwin thermal center which i ran probes from to the cpu, case, and nb chipset.
I am not using it to adjust fans so those arent connected - its just a reference temp I can see at a glance, esp considering the funky bios reading this boards been known to give.
I assume from these responces that even a nvidia 3 250 chipset shouldnt get as hot as mine?
I asked about that from the retailer i bought this from but he seemed to think it was "ok" at 50ish celcius, but then again he didnt look too confident when he said it, lol.
Idle right now reads on Corecenter at 28 celcius for cpu and 33 celcius for the chipset, although, I have readings of 37 c and 43 c from the kingwin thermal center, which i believe to be more accurate.
My voltage reads at 11.67 for the 12v line at idle right now.
The psu i got is stick from the xblade case i bought in store. (http://www.xoxide.com/xblade2.html)
I have a dvd burner, cd drive, and two maxtor ide hd's attached to the system;The only card is the agp.
Is there a way to check and see if the cpu ispower starved? software monitor or even an external probe perhaps?
I havent put a probe on it, but the ram came in its own heatspreader, which gets very hot to the touch as well.
What temps should I be looking for on these items?

HT1365 Hi can anyone help with this issue regarding my wireless magic mouse? When im on google chrome and scrolling down the page i always have youtube running in the background but the audio cuts/spits/pops can anyone help me with this?

Hi can anyone help with this issue regarding my wireless magic mouse? When im on google chrome and scrolling down the page i always have youtube running in the background but the audio cuts/spits/pops can anyone help me with this?

The figures you mention only make sense on your intranet. Are you still using the same wireless router. The verizon one is somewhat limited as far as max wireless-n performace. For one thing it only has a 2.4 radio. I like many people who wanted wireless-n performance before they even added a wireless-n gigabit router, have my own handling my wireless-n network.

Since updating to FF 8 I can no longer use Multirow book marks, can anyone help with this issue?

Since updating to FF 8 I can no longer use Multi-row book marks, can anyone help with this issue? the one I used is here http://multirowbookmarkstoolbar.com/

Try the support site:
*http://multirowbookmarkstoolbar.com/forum
*Multirow Bookmarks Toolbar Plus: https://addons.mozilla.org/firefox/addon/multirow-bookmarks-toolbarplus/

Re: Firefox no longer works with Mac OS X 10.5, will upgrading to Lion, OS X 10.7, help with this issue?

I cannot upgrade my Mac to Mountain Lion, OS X 10.8 and cannot buy a new Mac so will upgrading from
OS X 10.5 to OS X 10.7 help with this issue?

If you are going tob e upgrading to 10.7 you should be able to just upgrade, and then install future updates of Firefox with no problem.

Can anyone help with this issue.... intermittent sound from apple tv

Can anyone help with this issue?..watched the trailer of a movie with sound, then downloaded and went to watch it, but no sound and this message was displayed:"an incompatible audio signal has ben received.check the output device" tv is a sharp aquos

I don't know if this will help but have you tried switching the audio output to 16-bit? On the AppleTV, click Settings, Audio & Video, Audio Output. The two choices are "auto" and "16-bit". Good luck!

Is there a phone number I can call to talk to a live person about help with Lightroom issues ?

Is there a phone number I can call to talk to a live person about help with Lightroom issues ?

well the reason I wanted to talk to someone live because it would take forever to explain everything on here But anyway, here goes. I have an HP Pavilion Notebook with Intel Core i5-323om CPU @2.60 GHz and 8 gb ram 64bit. I am trying to run Lightroom 5.7 on my laptop and having major issues. I use an external hard drive for the storage of my photos. When I try to use Lightroom I run into many issues: Flickering of the screen, freezing up, slow, the loading circle just goes round and round lol. If I go to the washroom or leave the computer for even a minute it freezes up. I have to keep pressing Ctr/alt/delete to bring it back when it flickers. I have to constantly exit out of the program and restart it to be able to edit even just a couple of photos and then it starts acting up again.
I have tried un-installing and re-installing, updating everything on my pc, changing compatibility settings, updating development settings, I even took the laptop into have it looked at and they did all kinds of updates etc...and still couldn't figure out why it wasn't working for me. I have gone through the lists of troubleshooting for LR problems and there just seem to be nothing that works.....I have made new catalogues, moved them, tried using the software on my pc without the EHD, etc etc.......I have tried EVERYTHING...I think.....so I was looking for some answers as to why this is happening....

Updated 3GS to new operating system and a week later all music and ringtones disappeared and will not let me put them back on phone. Can anyone help with this issue?

Can some one help with these issues? Thanks.

Try assigning Queen as the Album Artist on the compilations in iTunes on your computer.

Need some URGENT help with 3 DVD mastering issues PLEASE! :

Hi there,
Firstly, I am running DVD SP 3.0.2 on Mac OS 10.4.7 on a G5 Dual 2 GHz 3Gb Ram plenty of HD space...
I am creating a DVD with: An intro sequence, a main menu, 4 sub menus, and 4 sections with around 12 chapters each.
I am having some big problems, and a pretty stuck. I will lest them separately below, numbered. If you are able to help, please refer clearly to which number you are helping with. Any help is MUCH appreciated! Many thanks!!
1. Each of the 5 menus (1 main, 4 sub) have a background video, and a separate audio track. I added the background videos by simply dragging them to the assests panel, then from there onto the menu editor window. They are created in FCP and are properly encoded. However, when I click the motion button, or use the simulator, the videos do not show up. The music plays, but all i see is plain black.
What is going on?!?!?!
2. I am really struggling with rollover buttons. I have custom created buttons, and I wand them to have a soft red glow around them when hovered over. HOW ON EARTH DO I ACTUALLY DO THIS??
The buttons are in photoshop so can be exported with/without background/glow in any format.
3. Is it possible, once I have got the above rollover working, to have an image to the right hand side of my buttons which changes with the the button rollover. i.e. hover over button 1, see image 1. hover over button 2, image changes to image 2.
PLEASE PLEASE give any help you can, I have a deadline coming up and am quite stumped. Thanks again!!

I am still having problems regarding issue Number 1. PLEASE ANYONE HELP?!
Sorry, I'm not sure about the motion menus. I avoid those whenever possible. But you might click on the menu in the storyline tab (whatever it's called -- the hierarchical view with the disc, tracks, slideshows, etc.) and look at the properties and see if there's anything you have to enable specifically for motion. And be sure the motion button is on on the main display/preview area, but it sounds like you already know how that works.
For your information, here is a screen grab of the menu I am trying to create:
http://www.redhavoc.co.uk/stuff/menu.jpg
I think it is obvious that when a button is hovered over, I want it to glow red, and the image to the right will change to match the respective button.
IS THIS GOING TO BE POSSIBLE????
Yes.
First, your menus have to be layered menus. Unfortunately, there's no way to convert non-layered menus to layered menus, so if you already have non-layered, you'll have to just delete them and create new layered menus. The button (and menu item) to create a layered menu should be right by the normal new-menu item.
Next, the graphical work is all in Photoshop.
Side tip: You may already know this, but I found it's best to use 640x480 for the Photoshop document. When I do text and leave it as a text object in the Photoshop file, it resizes poorly in DVDSP. So this ends up being another 720x480 vs. 640x480 square/rectangular pixel conversion thing. DVDSP plays in the 640x480 world, at least as far as the designer can see. So I keep my images at 640x480, and it doesn't have to resize, and everything looks right.
Moving on... Set up your basic background, the part that won't change (or will have other things covering it, like for your square image).
Then put in all the buttons and images you'll be using, each part in a separate layer. This could have fifteen buttons (you have five buttons, and there can be three versions for each -- inactive, selected, and activated versions) and five or six square images (you said one for each button, and you might want a blank default if, say, you want to add a "back" button on the menu and want some blank or default image for the square when they're on the "back" button).
Sometimes people don't bother with a separate "active" button state, but you usually want some visual feedback that they clicked the button. Also, I usually just build the default (unselected) button into the background; that's less hassle later on, and it will just draw the selected or activated buttons over that when the user is on that button.
Line up all your buttons and images. All the square images lined up perfectly on top of each other, all the buttons in the right places (so you'll have three buttons stacked on top of each other in each spot). Give each layer a short but quickly recognizable name, and line them up in a consistent order. (button1-default, button1-selected, button1-active, button1-squarepicture, then button2-default, ... etc.) Photoshop and DVDSP don't care, but it makes it easier for you later.
Note that earlier versions of DVDSP won't show Photoshop layer effects. (They handle layers, just not the effects, like inner glow, outer bezel, etc.) I don't remember when they changed this, but I think it was version 4.something. So if you're using that method to make your buttons glow, you may have to flatten each selected or active button layer, and you may even need to create a dummy blank layer underneath it first to give it something to flatten onto.
Save the file as a standard Photoshop file (.psd). Drag the file onto your DVDSP layered menu and set it as the background.
Now, in DVDSP, create all your buttons. Just drag boxes over/around the button pictures you have. Feel free to make them extra-big; users won't see the actual area you've selected, and bigger areas makes it easier for people to hit them if they're using a mouse on a computer to watch the DVD. You can point the buttons to their targets now if you want, and set the end jumps on the tracks if you want. (I tend to set the end jumps on the tracks so they automatically select the button for the next track.)
Now's the fun part, since it will actually hook everything up and should be easy if your naming layer order were consistent. Click on the layered menu (in that hierarchical view) and look at the properties window. (Sorry I can't remember the technical names for all these windows; I'm doing this all from memory. So feel free to ask more questions if you can't find what I'm talking about.) One of the properties tabs should have a grid of checkboxes with a list of your layers. Make sure the background is checked for all of the states. Then check the layers you want to show for each button state, as well as the corresponding square image to show for each.
Again, I'm doing this from memory, and I can't remember exactly how things are listed in that grid. But I remember it keeps your layers in the same order you put them in the Photoshop file and shows you those names, so it should make it easy to go down the list and check the right boxes.
And another side tip: You can update the Photoshop file, but once you've put it in DVDSP, if you change the layer order, it will screw up the check boxes you checked. It always shows you the layer names correctly, but it keeps the checkboxes in DVDSP simply assigned to the layer number, so the fifth layer will keep the same checkboxes even if you juggle them so some other layer is now the fifth layer. So if you do juggle the layers in Photoshop, go back and fix the checkbox list in DVDSP.
I put a sample Photoshop file based on yours in
http://dan.black.org/layered-menu-sample.psd
It's quick and dirty, but shows the layer layout, and you should be able to drop it on DVDSP to play with. (I also won't leave it there forever, maybe a few weeks, so anybody reading this in a month or more probably will get a 404 for that url.)
Again, doing this from memory, so feel free to ask if anything doesn't work or doesn't make sense.
G4/dual867 Mac OS X (10.4.5) 2GB/0.8TB

Need urgent help with Ifs1.1 on Solaris

We have installed IFS 1.1 with Oracle 8.1.7 on a three tier System (two Suns). We use JWS as WebServer. When we start IFS and JWS everything seems to work fine. But after some time (irregulary) we are not able to contact the JSP-Sites via a bowser. After restarting JWS, everything works fine for some time.
Sometimes it happens (about one times a day), that the whole JWS crashes (JWS-Admin doesn't work). So we have to restart the whole IFS.
What can be the problem? We need urgent help, because the deadline for our project is Wednesday.
By the way:
Where do I have to start CTX on the IFS- or the Oracle-Side?
null

Yes, we tried the Oracle HTTP - Server, but we weren4t able to get it to work. We didn4t get our JSP-Files to work with it. But that is another issue. I think it4s not a problem of JWS, but IFS.
Additionally it is strange, that we are still able to connect to the database via SqlPlus.
IFS works fine for about 15 minutes, than it crashes, nothing works anymore. We found following errors in the IfsAgents.log:
maybe it can help?!
Mon Dec 04 23:12:20 CET 2000
Server STARTED: IfsAgents(19944) not managed
Attempting to load agent EventExchangerAgent
Agent EventExchangerAgent loaded
Server STARTED: IfsProtocols(19945) not managed
Attempting to start agent EventExchangerAgent
EventExchangerAgent: Start request
Agent EventExchangerAgent started
Attempting to load agent ExpirationAgent
Agent ExpirationAgent loaded
EventExchangerAgent: starting timer
Attempting to start agent ExpirationAgent
ExpirationAgent: Start request
Agent ExpirationAgent started
Attempting to load agent GarbageCollectionAgent
Agent GarbageCollectionAgent loaded
ExpirationAgent: computed initial delay (in ms) is: 10024504
ExpirationAgent: starting timer
Attempting to start agent GarbageCollectionAgent
GarbageCollectionAgent: Start request
Agent GarbageCollectionAgent started
Attempting to load agent ContentGarbageCollectionAgent
Agent ContentGarbageCollectionAgent loaded
GarbageCollectionAgent: computed initial delay (in ms) is: 11816890
GarbageCollectionAgent: starting timer
Attempting to start agent ContentGarbageCollectionAgent
ContentGarbageCollectionAgent: Start request
Agent ContentGarbageCollectionAgent started
Attempting to load agent DanglingObjectAVCleanupAgent
Agent DanglingObjectAVCleanupAgent loaded
ContentGarbageCollectionAgent: starting timer
Attempting to start agent DanglingObjectAVCleanupAgent
DanglingObjectAVCleanupAgent: Start request
Agent DanglingObjectAVCleanupAgent started
Attempting to load agent OutboxAgent
Agent OutboxAgent loaded
DanglingObjectAVCleanupAgent: computed initial delay (in ms) is: 5500105
DanglingObjectAVCleanupAgent: starting timer
Attempting to start agent OutboxAgent
OutboxAgent: Start request
Agent OutboxAgent started
Attempting to load agent ServiceWatchdogAgent
Agent ServiceWatchdogAgent loaded
OutboxAgent: Done processing
Attempting to start agent ServiceWatchdogAgent
ServiceWatchdogAgent: Start request
Agent ServiceWatchdogAgent started
Attempting to load agent QuotaAgent
Agent QuotaAgent loaded
ServiceWatchdogAgent: Initializing ServerWatchdogTable with 9 entries
ServiceWatchdogAgent: starting timer
Server STARTED: FtpServer(20082) managed by IfsProtocols(19945)
ServiceWatchdogAgent: New Server being watchdogged
Attempting to start agent QuotaAgent
QuotaAgent: Start request
Agent QuotaAgent started
QuotaAgent: starting timer
Server STARTED: CupServer(20124) managed by IfsProtocols(19945)
ServiceWatchdogAgent: New Server being watchdogged
Server STARTED: ImapServer(20130) managed by IfsProtocols(19945)
ServiceWatchdogAgent: New Server being watchdogged
Server STARTED: SmtpServer(20150) managed by IfsProtocols(19945)
ServiceWatchdogAgent: New Server being watchdogged
ServiceWatchdogAgent: Unlocked Server Detected in checkServer
ServiceWatchdogAgent: Unlocked Server Detected in checkServer
ServiceWatchdogAgent: Unlocked Server Detected in checkServer
ServiceWatchdogAgent: Unlocked Server Detected in checkServer
ServiceWatchdogAgent: Unlocked Server Detected in checkServer
ServiceWatchdogAgent: Unlocked Server Detected in checkServer
ServiceWatchdogAgent: Unlocked Server being investigated
ServiceWatchdogAgent: Unlocked Server being investigated
ServiceWatchdogAgent: Unlocked Server being investigated
ServiceWatchdogAgent: Unlocked Server being investigated
ServiceWatchdogAgent: Unlocked Server being investigated
ServiceWatchdogAgent: Unlocked Server being investigated
ServiceWatchdogAgent: Freeing unlocked server 19687
ServiceWatchdogAgent: Freeing unlocked server 19666
Server STOPPED: CupServer(19687) managed by IfsProtocols(19519)
ServiceWatchdogAgent: Freeing unlocked server 19723
ServiceWatchdogAgent: Freeing unlocked server 19520
Server STOPPED: FtpServer(19666) managed by IfsProtocols(19519)
Server STOPPED: SmtpServer(19723) managed by IfsProtocols(19519)
ServiceWatchdogAgent: Freeing unlocked server 19519
Server STOPPED: IfsAgents(19520) not managed
ServiceWatchdogAgent: Freeing unlocked server 19712
Server STOPPED: IfsProtocols(19519) not managed
Server STOPPED: ImapServer(19712) managed by IfsProtocols(19519)
ServiceWatchdogAgent: Freed Server removed from watchdog list
ServiceWatchdogAgent: Freed Server removed from watchdog list
ServiceWatchdogAgent: Freed Server removed from watchdog list
ServiceWatchdogAgent: Freed Server removed from watchdog list
ServiceWatchdogAgent: Freed Server removed from watchdog list
ServiceWatchdogAgent: Freed Server removed from watchdog list
QuotaAgent: Timer event: 0 active; 0 exceeded
ContentGarbageCollectionAgent: Freed 5 unreferenced ContentObjects
QuotaAgent: Timer event: 0 active; 0 exceeded
ServiceWatchdogAgent: IfsException publishing timer details:
ServiceWatchdogAgent: oracle.ifs.common.IfsException: IFS-11012: Unable to get events from other services
java.sql.SQLException: ORA-03114: not connected to ORACLE
ServiceWatchdogAgent: IfsException in checkForDeadServices():
ServiceWatchdogAgent: oracle.ifs.common.IfsException: IFS-10651: Unable to begin transaction
oracle.ifs.common.IfsException: IFS-10603: Unable to set database savepoint
java.sql.SQLException: ORA-03114: not connected to ORACLE
ServiceWatchdogAgent: IfsException in handle loop; continuing:
ServiceWatchdogAgent: oracle.ifs.common.IfsException: IFS-10651: Unable to begin transaction
oracle.ifs.common.IfsException: IFS-10603: Unable to set database savepoint
java.sql.SQLException: ORA-03114: not connected to ORACLE
ServiceWatchdogAgent: IfsException publishing timer details:
ServiceWatchdogAgent: oracle.ifs.common.IfsException: IFS-10651: Unable to begin transaction
oracle.ifs.common.IfsException: IFS-10603: Unable to set database savepoint
java.sql.SQLException: ORA-03114: not connected to ORACLE
ServiceWatchdogAgent: IfsException publishing timer details:
ServiceWatchdogAgent: oracle.ifs.common.IfsException: IFS-10651: Unable to begin transaction
oracle.ifs.common.IfsException: IFS-10603: Unable to set database savepoint
java.sql.SQLException: ORA-03114: not connected to ORACLE
ServiceWatchdogAgent: IfsException publishing timer details:
ServiceWatchdogAgent: oracle.ifs.common.IfsException: IFS-10651: Unable to begin transaction
oracle.ifs.common.IfsException: IFS-10603: Unable to set database savepoint
java.sql.SQLException: ORA-03114: not connected to ORACLE
ServiceWatchdogAgent: IfsException publishing timer details:
ServiceWatchdogAgent: oracle.ifs.common.IfsException: IFS-10651: Unable to begin transaction
oracle.ifs.common.IfsException: IFS-10603: Unable to set database savepoint
java.sql.SQLException: ORA-03114: not connected to ORACLE
ServiceWatchdogAgent: IfsException publishing timer details:
ServiceWatchdogAgent: oracle.ifs.common.IfsException: IFS-10651: Unable to begin transaction
oracle.ifs.common.IfsException: IFS-10603: Unable to set database savepoint
java.sql.SQLException: ORA-03114: not connected to ORACLE
null

Urgent Help with Planning Book

Hello Gurus,
Need your help with a very urgent issue. I cannot see my key figure values in my planning book(Interactive Planning). I could sucessfully generate my CVC, then initialised my planning area. Then when I go the interactive planning I can see all my characteristics -Ex Material master( has all values), Prod type has values, etc. Iam in DEV system and have to move the whole config to QA now. I have to validate that the config works in QA. Its works ok in the sandbox but I cannot figureout why I can not see the values for key figs that Iam loading from a Flat File. Please help!!!!!!

Hello Suresh,
I have one more question for you. Let me tell you my scenario. I have the client giving me a rough forecast for the future. I have to do stat forecast based on the history and check that against the initial forecast given by them. But, the problem I realised now is that when I go to my planning books I can see the values for 2008 in mothly buckets since I have 0calmonth. But the client gave me another file with forecast for 2008 in monthly buckets and for 2009 and 2010 in quarter buckets. So, i have a planning buck profile defined to meet that but, how do I upload the file with both 0calmonth and 0calquarter in a single file. Please let me know!! Urgent task.
Thanks again,
Chinna.

URGENT: Help with dynamic borders!

Hello all -
I DESPERATLY need help with this! I am using the code from
kirupa's xml photo gallery with the thumbnails. right now the alpha
changes on mouseover, fine...but my client is demanding that it
draw a border instead. I have been at this for about a week and
have NO idea how to do this...i have looked at things like API's
and things...but my main issue is that the images and MC's are all
created on the fly and i dont know how to code in an on mouseover
draw a border type of function, no idea at all!
This is my code as it sits now, PLEASE SOMEONE HELP ME!!!
thank you in advance!

really could use some help quick here guys

Urgent Help with Image Gallery

Hi,
I really need help with an image gallery i have created. Cannot think of a resolution
So....I have a dynamic image gallery that pulls the pics into a movie clip and adds them to the container (slider)
The issue i am having is that when i click on this i am essentially clicking on all the items collectively and i would like to be able to click on each image seperately...
Please see code below
var xml:XML;
var images:Array = new Array();
var totalImages:Number;
var nbDisplayed:Number = 1;
var imagesLoaded:int = 0;
var slideTo:Number = 0;
var imageWidth = 150;
var titles:Array = new Array();
var container_mc:MovieClip = new MovieClip();
slider_mc.addChild(container_mc);
container_mc.mask = slider_mc.mask_mc;
function loadXML(file:String):void{
var xmlLoader:URLLoader = new URLLoader();
xmlLoader.load(new URLRequest(file));
xmlLoader.addEventListener(Event.COMPLETE, parseXML);
function parseXML(e:Event):void{
xml = new XML(e.target.data);
totalImages = xml.children().length();
loadImages();
function loadImages():void{
for(var i:int = 0; i<totalImages; i++){
var loader:Loader = new Loader();
loader.load(new URLRequest("images/"+String(xml.children()[i].@brand)));
images.push(loader);
//      loader.contentLoaderInfo.addEventListener(ProgressEvent.PROGRESS,onProgress);
     loader.contentLoaderInfo.addEventListener(Event.COMPLETE,onComplete);
function onComplete(e:Event):void{
imagesLoaded++;
if(imagesLoaded == totalImages){
createImages();
function createImages():void{
for(var i:int = 0; i < images.length; i++){
var bm:Bitmap = new Bitmap();
bm = Bitmap(images[i].content);
bm.smoothing = true;
bm.x = i*170;
container_mc.addChild(bm);
      var caption:textfile=new textfile();
      caption.x=i*170; // fix text positions (x,y) here
   caption.y=96;
      caption.tf.text=(xml.children()[i].@brandname)
      container_mc.addChild(caption);

yes, sorry i do wish to click on individual images but dont know how to code that
as i mentioned i have 6 images that load into an array and then into a container and i think that maybe the problem is that i have the listener on the container so when i click on any image it gives the same results.
what i would like is have code thats says
if i click on image 1 then do this
if i click on image 2 then do something different
etc
hope that makes sense
thanks for you help!

Urgent help with memory issue (ORA-04031)

Similar Messages

Maybe you are looking for