Urgent help with WRT110 Wireless connection

i have got this wireless router a few months ago. since i have gotten it, i have only used hard wired to my desktop. I got a laptop recently, running Vista. I am trying to setup using the wireless with WPA2 personal security. However, i am not supposed get it to connect. It told me unidentified network, and it's not going through to the global earth icon under "Network and Sharing Center".
Now, i have searched solution on google, this is not my first experience setting up wireless, i used to have a WRT54G wireless and it works fine.
Now i have tried all these procedure below:
1) Open the setup page of the router and Under the Wireless tab,Click on Advanced Wireless Settings...Change the Beacon Interval to 50,Fragmentation Threshold to 2304,RTS Threshold to 2304 and Click on Save Settings...Also reduce the MTU to 1400 and click on save settings..Now,check.
2) On all Vista and Win 7 computers, disable IPv6 under the LAN properties for the adapters.
It still doesn't work. Can anybody here help me with this issue? thanks alot

Maybe this will help you but what I do with my adapters when installing is disabling my internet connection, firewall, virus and almost everything. I also turn the internet off then I instal the software. You can try that.cheapest voipcheapest voip callsOSU Beaversfree voip phone calls

Similar Messages

Sigh... i need some specific help with airport wireless connectivity

hi. long time reader, first time poster. Pretty much comes down to a failure in how to search... so, links to answers are a-ok with me!
here's the problem, PowerPC 970 (2.0ghz, 2 cpu Power Mac G5 for search string) that does not like the airport extreme card that i'm trying to install. using the apple documentation, and using card model A1026 emc# 1951
machine will not boot after card installation. running fresh install of 10.5 with 10.5.8 and latest airport install.
any help as to what i'm doing wrong here and why we're not booting up? Thanks! if there's a database that has a list of compatible cards by machine, please please please linky
TIA

Hi-
One Airport Extreme card, M8881 (LL/A is US model) PN#652-0817:
http://www.smalldog.com/product/73422/atfgc
http://support.apple.com/kb/HT3024
Airport Installation:
http://manuals.info.apple.com/en/AirPort_Card.pdf
The Bluetooth module is separate from the Airport Extreme card:
http://www.yourmacstore.com/shop/shopexd.asp?id=467&bc=no

Help With WRT110

Hi everyone i have a WRT110 and im new to wireless. i went through the whole installation. My router is installed onto my computer and im able to to go on the internet only if my laptop is connected to it with the blue wire. I tried everything to enable my wireless and no matter what i did nothing worked. Can someone tell me step by step what i had to do?

Hello Teek, I don't know if somebody already answer your help with WRT110 thread. I posted today a problem in it, but kept looking for answers in this forum. Finally I found one by user Mort. I hope this will help you resolve your problems such as it did for me.
Regards, Angela
Yes, you can go wireless, for that you have to adjust the wireless settings on your router and you should have a wireless adapter/card... Please access the setup page of the router by launching an Internet
Explorer and type on the address bar, 192.168.1.1 and press enter. When
it prompts for the username and password, leave the username field
empty and provide password as admin all in lower cases and then
click on ok. Click on the Wireless tab and click Manual set up
- Here Wireless Network mode should be mixed
- Provide any name in the Wireless Network Name (SSID) box, all in
lower cases without any spaces in between.
- Set wireless channel to 11
- And wireless SSID broadcast should be Enabled and then click on save
settings.
Please make a note of Wireless Network Name (SSID) as this is the
Network Identifier.
For Wireless Security : -
Now Click on the Sub tab under Wireless > Wireless Security.
Change the Wireless security mode to WEP
Encryption should be 64 bits.
Leave the Pass phrase blank, don't type in anything.
And under WEP Key 1 type in any 10 numbers please.
Click on save settings.
Please make a note of WEP Key 1 as this is the Security Key for the
Wireless Network.
Now try to look for the Wireless Network(SSID) on your laptop and try to connect...
I may add that after you try and connect remember then to set your laptop settings to be the same you enter when configurating the router. Angela

Satellite A660-13T - I can't go from 65 Mbps with the wireless connection.

+Sorry for my English, is not my native language.+
Hi,
I expose my problem:
I can't go from 65 Mbps with the wireless connection. I can't move from that connection speed.
Laptop configuration:
* Windows 7 Ultimate 64 bits (with all updates installed).
* All drivers updated properly.
* With the latest version of BIOS.
Router:
* Tp-link TL-WR1043ND, installed 3 meters above the laptop (without obstacles).
Configuration of router:
* WPA2-PSK AES.
* 802.11n
* Maximum output power.
* Channel: 11 (not automatic, this channel is relatively free).
* Channel width: 40 Mhz.
* Maximum tx rate: 300 Mbps.
Other information:
* The wireless card drivers are correctly then updated (ver. 5.60.48.35).
* The router has updated firmware.
* I have tried all settings of the wireless card.
* Bluetooth off (without interferences).
* {color:#ff0000}There are other computers on the network that connects 150 and 300 Mbps (with the same network configuration).{color}
Thanks in advance,
Greetings.
Message was edited by: Xibalba

Hi buddy,
> I kept O.S. original for a week and the problem was the same
If you had the same problem with factory settings you should test another router. Maybe its a malfunction of router or something else (not compatible to your WLAN card).
Furthermore ask the manufacture of your router if they know something about this.
In worst case its a hardware malfunction of your notebook. You should contact nearest service centre. I believe they can fix it under warranty, because A660 is pretty new notebook.
Good luck! :)

Ever since I received my Macbook Pro in July 2011 I've had issues with my wireless connection at home. After software updates, Apple support suggested I reboot my router which works. But now I have to do it every other day. ????

Ever since I received my Macbook Pro in July 2011 I've had issues with my wireless connection at home. After software updates, Apple support suggested I reboot my router which works. But now I have to do it every other day. ???? AT&T my DSL carrier suggests I get a new router. Apparently the one I have is really old and doesn't support my Macbook Pro. Does this sound right?

If your using WEP encryption yes, Apple has discontinued that becaues it's worthless. WEP (and WPA) is cracked so encryption makes no sense.
Get a new Wireless N router, set it up with WPA2 (AES) Personal and two different 20+ randon letter/numbersymbol character passwords
One for Admin access only of the router, keep this on paper off all comptuers in a safe someplace.
One for entering into devices, computers etc for Internet Access Only.
You need the long and random password to defeat brute force attacks by GPU software that the hackers have now.
Also if you give out the password to another, they can't hack the network with the guest access password.
Computers remember the internet password, so anyone with access to your machines or network will have the password.
Since you have another Admin only password, they can't hack in. got it?
You don't need "Invisible" or "MAC Address filtering" that's a waste of time as hackers can sniff a network and causes issues getting on the network.
Good luck.

Need help with thinkvantage access connection

Here a log file with new access connection:
Connection status:  Disconnected
Cause:  Driver disconnected while associating.
Error code:  229378
Recommended actions:
Verify that the encryption settings (WEP/TKIP/AES) specified in this profile match those expected by the wireless network.
Verify that the wireless adapter in your computer has not been restricted from accessing the radio channels being used by the wireless network.
If the problem persists, contact your network administrator and provide the troubleshooting information below.
Adapter Details
Adapter name  11a/b/g Wireless LAN Mini PCI Express Adapter
Adapter type  Wireless LAN
Adapter speed  54.0 Mbps
Driver/Firmware version  7.6.0.96/ N/A
Adapter status  Enabled
Connection Status  Disconnected
Disable unused cards?  Yes
TCP/IP Settings
DHCP enabled?  Yes
Append parent suffixes of the primary DNS suffix?  Yes
Register connection's DNS suffix in registration?  Yes
Register connection's DNS suffix in DNS registration?  Yes
Enable LMHOSTS Lookup?  No
NetBIOS setting  "Default"
Wireless Settings
Network name (SSID)  linksys
Connection type  Access point
Wireless mode  Auto
Security encryption  None
System Information
System model  7732CTO
BIOS version  7LETB7WW (2.17 )
Operating system version  Windows Vista, Service pack 2
Access connections version  5.31
Access Point scan list
Network name (SSID)              Wireless mode MAC address                   Signal strength Channel
linksys                          802.11g        00:1C:10:54:65:B6              24%            11
Global Settings
Network
Allow all users of this system to switch to any existing location profile  -> No
Allow the wireless LAN radio to be turned off when inactive  -> No
Allow selection of location profiles with Fn+F5 On Screen Display menu  -> Yes
Enable autodeletion of unused profiles  -> Yes
Notifications
Show ThinkVantage Access Connections status icon in task tray  -> No
Show wireless status icon in task tray  -> No
Display the progress indicator window when a profile is being applied  -> Yes
Preferences
Enable sound effects  -> Yes
Do not show balloon tips from the Access Connections system tray icon  -> Yes
Show WiMAX page as default on Main GUI  -> No
Automatic location profile switching list
Include Ethernet connections in automatic switching and prompt me to save Ethernet ports  -> Yes
When no other connections are available, connect through Wireless WAN or WiMAX  -> No
Wireless priority list
Selection    Priority     Location profile name                                            Connection order                 Connection details
No                  1     linksys                                                          Wireless LAN                     SSID: linksys
Log File
Debug Log is enabled
It didn't happen when I use old version. Can anybody help me?

Are you getting any error message while connecting to ds..?
Are you able to go online on wired computer...?
Are you able to go online on any wireless computer on your network..?
Open the router setup page and under the wireless tab,Change the Channel width to 20MHz only and Channel to 11-2.462GHz and click on save settings...Under the Advanced Wireless Settings...Change the Beacon Interval to 75,Change the Fragmentation Threshold to 2304,Change the RTS Threshold to 2304 and Click on Save Settings...
Now,check.

Urgent Help with network access to FileOutputStream

URGENT HELP NEEDED GUYS...I am stuck on this past 2 days. I tried several alternatives but to vain.
I am trying to access a Folder on a user's computer which is lying in a different Domain.
For accessing this folder, I have the following information with me.
Domain name, PC name, folder name, windows username, windows password.
Note: This username and password will give me rights to read + write to that folder.
How to use these information to open a fileoutputstream ? Does the java.io package allow programs to pass a username, password , domainname, pcname and then the folder and filename to create/read/write files..
Pls. suggest code examples. Sometime back I posted this query but didnt get an answer to my satisfaction. I have tried at my end but unsuccessful yet. Help would be appreciated.
I am trying this on a Windows File System and Network domain
THIS IS V. URGENT
Thanks,

Hi HJK,
I am referring to the last reply of yours.
" Hi, there are three approaches I can think of offhand:
1) make sure the user-context under which you run the java app has the right to access the remote drive.
2) Do the network connection in a batch or c program and call that at the start of your java app with Runtime#exec.
3) Write some c/c++ code to open the connection and integrate that via JNI.
Let me know what (other) solution you came up with in the end!
Regarding the 1st.
I am supposed to write a remote installation utility actually. There are around 200 PC(s) in a network on which I need to copy these java class files. My problem statement is such that at runtime I only have username, passwords, domain access. I am not supposed to map any drives. Its supposed to be done dynamically. No manual intervention required. :(
How do I do the network connection in a batch mode ? Let me know that?
If 2nd option can be done, probably I can think of action-3 at the moment I am quite blurr :(

Rapidshare link not working with WRT110 wireless router

I am trying to download using rapidshare but after the countdown timer reaches zero and the download link button appears, i couldn't get the link for the download file. This happens when i am wireless but when i connect my laptop directly to the linksys WRT110 router via LAN cable, i can get the link for the download file without problems.
What settings do i need to do to fix this? The rapidshare says it might be due to a rotating IP address or something. Only the rapidshare website is having this problem, other downloading sites doesn't seem to have this problem.
i am using a WRT110 router, with no security, on a wireless connection on my laptop on windows vista, using firefox.

Tried Internet Explorer 7, its the same problem. it still takes some time before i can get the link for the download file. Although i sometimes can get it faster with IE than with firefox.
Any solutions to this problem? I still thinking its the Routers configuration that has to be modified to solve this problem.

A little help please: lost wireless connection days ago

Here's an interesting problem I could really use some help with (I've been working on it for many hours over the past week):
I have a DLink 624 (vC - firmware 2.7) wireless cabled to my iMac G4 (running 10.4.4) that serves as a wireless network in the house. I've got a pc laptop in another room connected to the wirelesss (or anyone else that drops by the house). Its actually all gone very smoothly from installing the wireless router to connecting other laptops to it. I've seen a number of folks mention that the 624 hasn't been a favorite but I haven't had any problems until now.
Over the past few days I've been trying, without any success, to connect my kid's iBook G4 to the wireless network. It had been working ok until I upgraded the iBook to 10.4. Then the connection went toes up.
I've checked the discussion threads and came across a person who had a similar issue with the DL 624 (Oct 24, '05) but there wasn't a solution.
The problems I've encountered with the iBook over the past few days:
- tried using the Apple setup assistant for the internet - no luck
- reset and tried all the network connection options (via system preferences). - when I set it to "Airport" it actually knocks my iMac (with its direct ethernet connection to the router) off the internet! That seems really odd.
- reset all the preferences and tried a direct ethernet connection from the router to the iBook - no change.
- powered down and re-set from scratch the DLink router back to the iMac hoping I'd snag the iBook - no luck there either.
I also trashed the "com.apple.networkConfig.plist" in Library>Preferences but no luck after I reset everything again.
Any suggestions? Thanks.

I think it is the last airport up date. I have a bunch that started not to conecton thursday.

Need urgent help with Ifs1.1 on Solaris

We have installed IFS 1.1 with Oracle 8.1.7 on a three tier System (two Suns). We use JWS as WebServer. When we start IFS and JWS everything seems to work fine. But after some time (irregulary) we are not able to contact the JSP-Sites via a bowser. After restarting JWS, everything works fine for some time.
Sometimes it happens (about one times a day), that the whole JWS crashes (JWS-Admin doesn't work). So we have to restart the whole IFS.
What can be the problem? We need urgent help, because the deadline for our project is Wednesday.
By the way:
Where do I have to start CTX on the IFS- or the Oracle-Side?
null

Yes, we tried the Oracle HTTP - Server, but we weren4t able to get it to work. We didn4t get our JSP-Files to work with it. But that is another issue. I think it4s not a problem of JWS, but IFS.
Additionally it is strange, that we are still able to connect to the database via SqlPlus.
IFS works fine for about 15 minutes, than it crashes, nothing works anymore. We found following errors in the IfsAgents.log:
maybe it can help?!
Mon Dec 04 23:12:20 CET 2000
Server STARTED: IfsAgents(19944) not managed
Attempting to load agent EventExchangerAgent
Agent EventExchangerAgent loaded
Server STARTED: IfsProtocols(19945) not managed
Attempting to start agent EventExchangerAgent
EventExchangerAgent: Start request
Agent EventExchangerAgent started
Attempting to load agent ExpirationAgent
Agent ExpirationAgent loaded
EventExchangerAgent: starting timer
Attempting to start agent ExpirationAgent
ExpirationAgent: Start request
Agent ExpirationAgent started
Attempting to load agent GarbageCollectionAgent
Agent GarbageCollectionAgent loaded
ExpirationAgent: computed initial delay (in ms) is: 10024504
ExpirationAgent: starting timer
Attempting to start agent GarbageCollectionAgent
GarbageCollectionAgent: Start request
Agent GarbageCollectionAgent started
Attempting to load agent ContentGarbageCollectionAgent
Agent ContentGarbageCollectionAgent loaded
GarbageCollectionAgent: computed initial delay (in ms) is: 11816890
GarbageCollectionAgent: starting timer
Attempting to start agent ContentGarbageCollectionAgent
ContentGarbageCollectionAgent: Start request
Agent ContentGarbageCollectionAgent started
Attempting to load agent DanglingObjectAVCleanupAgent
Agent DanglingObjectAVCleanupAgent loaded
ContentGarbageCollectionAgent: starting timer
Attempting to start agent DanglingObjectAVCleanupAgent
DanglingObjectAVCleanupAgent: Start request
Agent DanglingObjectAVCleanupAgent started
Attempting to load agent OutboxAgent
Agent OutboxAgent loaded
DanglingObjectAVCleanupAgent: computed initial delay (in ms) is: 5500105
DanglingObjectAVCleanupAgent: starting timer
Attempting to start agent OutboxAgent
OutboxAgent: Start request
Agent OutboxAgent started
Attempting to load agent ServiceWatchdogAgent
Agent ServiceWatchdogAgent loaded
OutboxAgent: Done processing
Attempting to start agent ServiceWatchdogAgent
ServiceWatchdogAgent: Start request
Agent ServiceWatchdogAgent started
Attempting to load agent QuotaAgent
Agent QuotaAgent loaded
ServiceWatchdogAgent: Initializing ServerWatchdogTable with 9 entries
ServiceWatchdogAgent: starting timer
Server STARTED: FtpServer(20082) managed by IfsProtocols(19945)
ServiceWatchdogAgent: New Server being watchdogged
Attempting to start agent QuotaAgent
QuotaAgent: Start request
Agent QuotaAgent started
QuotaAgent: starting timer
Server STARTED: CupServer(20124) managed by IfsProtocols(19945)
ServiceWatchdogAgent: New Server being watchdogged
Server STARTED: ImapServer(20130) managed by IfsProtocols(19945)
ServiceWatchdogAgent: New Server being watchdogged
Server STARTED: SmtpServer(20150) managed by IfsProtocols(19945)
ServiceWatchdogAgent: New Server being watchdogged
ServiceWatchdogAgent: Unlocked Server Detected in checkServer
ServiceWatchdogAgent: Unlocked Server Detected in checkServer
ServiceWatchdogAgent: Unlocked Server Detected in checkServer
ServiceWatchdogAgent: Unlocked Server Detected in checkServer
ServiceWatchdogAgent: Unlocked Server Detected in checkServer
ServiceWatchdogAgent: Unlocked Server Detected in checkServer
ServiceWatchdogAgent: Unlocked Server being investigated
ServiceWatchdogAgent: Unlocked Server being investigated
ServiceWatchdogAgent: Unlocked Server being investigated
ServiceWatchdogAgent: Unlocked Server being investigated
ServiceWatchdogAgent: Unlocked Server being investigated
ServiceWatchdogAgent: Unlocked Server being investigated
ServiceWatchdogAgent: Freeing unlocked server 19687
ServiceWatchdogAgent: Freeing unlocked server 19666
Server STOPPED: CupServer(19687) managed by IfsProtocols(19519)
ServiceWatchdogAgent: Freeing unlocked server 19723
ServiceWatchdogAgent: Freeing unlocked server 19520
Server STOPPED: FtpServer(19666) managed by IfsProtocols(19519)
Server STOPPED: SmtpServer(19723) managed by IfsProtocols(19519)
ServiceWatchdogAgent: Freeing unlocked server 19519
Server STOPPED: IfsAgents(19520) not managed
ServiceWatchdogAgent: Freeing unlocked server 19712
Server STOPPED: IfsProtocols(19519) not managed
Server STOPPED: ImapServer(19712) managed by IfsProtocols(19519)
ServiceWatchdogAgent: Freed Server removed from watchdog list
ServiceWatchdogAgent: Freed Server removed from watchdog list
ServiceWatchdogAgent: Freed Server removed from watchdog list
ServiceWatchdogAgent: Freed Server removed from watchdog list
ServiceWatchdogAgent: Freed Server removed from watchdog list
ServiceWatchdogAgent: Freed Server removed from watchdog list
QuotaAgent: Timer event: 0 active; 0 exceeded
ContentGarbageCollectionAgent: Freed 5 unreferenced ContentObjects
QuotaAgent: Timer event: 0 active; 0 exceeded
ServiceWatchdogAgent: IfsException publishing timer details:
ServiceWatchdogAgent: oracle.ifs.common.IfsException: IFS-11012: Unable to get events from other services
java.sql.SQLException: ORA-03114: not connected to ORACLE
ServiceWatchdogAgent: IfsException in checkForDeadServices():
ServiceWatchdogAgent: oracle.ifs.common.IfsException: IFS-10651: Unable to begin transaction
oracle.ifs.common.IfsException: IFS-10603: Unable to set database savepoint
java.sql.SQLException: ORA-03114: not connected to ORACLE
ServiceWatchdogAgent: IfsException in handle loop; continuing:
ServiceWatchdogAgent: oracle.ifs.common.IfsException: IFS-10651: Unable to begin transaction
oracle.ifs.common.IfsException: IFS-10603: Unable to set database savepoint
java.sql.SQLException: ORA-03114: not connected to ORACLE
ServiceWatchdogAgent: IfsException publishing timer details:
ServiceWatchdogAgent: oracle.ifs.common.IfsException: IFS-10651: Unable to begin transaction
oracle.ifs.common.IfsException: IFS-10603: Unable to set database savepoint
java.sql.SQLException: ORA-03114: not connected to ORACLE
ServiceWatchdogAgent: IfsException publishing timer details:
ServiceWatchdogAgent: oracle.ifs.common.IfsException: IFS-10651: Unable to begin transaction
oracle.ifs.common.IfsException: IFS-10603: Unable to set database savepoint
java.sql.SQLException: ORA-03114: not connected to ORACLE
ServiceWatchdogAgent: IfsException publishing timer details:
ServiceWatchdogAgent: oracle.ifs.common.IfsException: IFS-10651: Unable to begin transaction
oracle.ifs.common.IfsException: IFS-10603: Unable to set database savepoint
java.sql.SQLException: ORA-03114: not connected to ORACLE
ServiceWatchdogAgent: IfsException publishing timer details:
ServiceWatchdogAgent: oracle.ifs.common.IfsException: IFS-10651: Unable to begin transaction
oracle.ifs.common.IfsException: IFS-10603: Unable to set database savepoint
java.sql.SQLException: ORA-03114: not connected to ORACLE
ServiceWatchdogAgent: IfsException publishing timer details:
ServiceWatchdogAgent: oracle.ifs.common.IfsException: IFS-10651: Unable to begin transaction
oracle.ifs.common.IfsException: IFS-10603: Unable to set database savepoint
java.sql.SQLException: ORA-03114: not connected to ORACLE
null

Urgent help with BPEL process

Hello there,
I need help with BPEL project.
i have created a table Employee in Database.
I did create application, BPEL project and connection to the database properly using Database Adapter.
I need to read the records from the database and convert into xml fomat and it should to go approval for BPM worklist.
Can someone please describe me step by step what i need to do.
Thanks,
Dps

Read the Demo examples given with Oracle BPEL Process Manager.
I am now at a proficient level in BPEL in the past 1 year,
still need to reach the excellent mark.
Thanks & Regards,
Gopal D. Kalsekar
Sr. Software Developer
Business Solutions (eGroup)
M.H. Alshaya Company W.L.L.
www.alshaya.com
Jai Maharashtra
P :- (965) 224 3598
F :- (965) 224 2488
E :- [email protected]

Urgent help with simple BPEL process for reading data from database

Hello there,
I need help with BPEL project.
i have created a table Employee in Database.
I did create application, BPEL project and connection to the database properly using Database Adapter.
I need to read the records from the database and convert into xml fomat and it should to go approval for BPM worklist.
Can someone please describe me step by step what i need to do.
Thx,
Dps

I have created a table in Database with data like Empno,name,salary,comments.
I created Database Connection in jsp page and connecting to BPEL process.
It initiates the process and it goes automatically for approval.
Please refer the code once which i created.
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"
"http://www.w3.org/TR/html4/loose.dtd">
<%@page import="java.util.Map" %>
<%@page import="com.oracle.bpel.client.Locator" %>
<%@page import="com.oracle.bpel.client.NormalizedMessage" %>
<%@page import="com.oracle.bpel.client.delivery.IDeliveryService" %>
<%@page import="javax.naming.Context" %>
<%@page import="java.util.Hashtable" %>
<%@page import="java.util.HashMap" %>
<%@ page import="java.sql.*"%>
<%@ page import= "jspprj.DBCon"%>
<html>
<head>
<title>Invoke CreditRatingService</title>
</head>
<body>
<%
DBCon dbcon=new DBCon();
Connection conn=dbcon.createConnection();
Statement st=null;
PreparedStatement pstmt=null;
Hashtable env= new Hashtable();
ResultSet rs = null;
Map payload =null;
try
env.put(Context.INITIAL_CONTEXT_FACTORY, "com.evermind.server.rmi.RMIInitialContextFactory");
env.put(Context.PROVIDER_URL, "opmn:ormi://localhost:port:home/orabpel");//bpel server
env.put("java.naming.security.principal", "username");
env.put("java.naming.security.credentials", "password");//bpel console
Locator locator = new Locator("default","password",env);
IDeliveryService deliveryService =
(IDeliveryService)locator.lookupService(IDeliveryService.SERVICE_NAME );
// construct the normalized message and send to Oracle BPEL Process Manager
NormalizedMessage nm = new NormalizedMessage();
java.util.HashMap map = new HashMap();
st=conn.createStatement();
out.println("connected");
String query1="Select * from EMPLOYEE";
rs=st.executeQuery(query1);
/*reading Data From Database and converting into XML format
so that no need of going to BPEL console and entering the details.
while (rs.next()){
String xml1 = "<AsynchBPELProcess1ProcessRequest xmlns='http://xmlns.oracle.com/AsynchBPELProcess1'>"+
"<Empno>"+rs.getString(1)+"</Empno>"+
"<EmpName>"+rs.getString(2)+"</EmpName>"+
"<Salary>"+rs.getString(3)+"</Salary>"+
"<Comments>"+rs.getString(4)+"</Comments>"+
"</AsynchBPELProcess1ProcessRequest>";
out.println(xml1);
nm.addPart("payload", xml1 );
// EmployeeApprovalProcess is the BPEL process in which human task is implemented
deliveryService.post("EmployeeApprovalProcess", "initiate", nm);
// payload = res.getPayload();
out.println( "BPELProcess CreditRatingService executed!<br>" );
// out.println( "Credit Rating is " + payload.get("payload") );
//Incase there is an exception while invoking the first server invoke the second server i.e lsgpas13.
catch(Exception ee) {
//("BPEL Server lsgpas14 invoking error.\n"+ee.toString());
%>
</body>
</html>
Its working fine.And i want it for Bulk approvals.please help me step by step procedure if any other way to implement this.

Urgent help with simple BPEL process

Hello there,
I need help with BPEL project.
I'm new in JDeveloper&BPEL and i'd like to create process that we'll after sending employee ID return personal details of that employee.
I did create application, BPEL project and connection to the database properly but somehow i can't deal input and output variable.
Can someone please describe me step by step what i need to do, how to set up variable etc
Thx,
DI

Me again. This time i hope i'll get some help :(
Solution to my problem is change to the data-sources.xml and oc4j-ra.xml.
Since i have database on same machine with BPEL PM Server that uses Olite DB when i tried to make changes i found in tutorials, here on forum and rest of internet
BPEL PM Server just freeze, didn't start at all.
Here are data-sources.xml, oc4j-ra.xml and DBAdapter wsdl file. Plz can someone make changes to those files i'll appreciate that.
HOME\bpel\system\appserver\oc4j\j2ee\home\application-deployments\default\DbAdapter
oc4j-ra.xml
<?xml version="1.0"?>
<oc4j-connector-factories xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="http://www.oracle.com/technology/oracleas/schema/oc4j-connector-factories-10_0.xsd" schema-major-version="10" schema-minor-version="0" >
     <imported-shared-libraries>
          <import-shared-library name="oracle.bpel.common"/>
          <import-shared-library name="oc4j.internal"/>
          <import-shared-library name="oracle.xml"/>
          <import-shared-library name="oracle.sqlj"/>
          <import-shared-library name="oracle.toplink"/>
          <import-shared-library name="oracle.jdbc"/>
     </imported-shared-libraries>
     <connector-factory location="eis/DB/DBConn_XE" connector-name="Database Adapter">
          <config-property name="xADataSourceName" value="jdbc/DBConn_XEDataSource"/>
          <config-property name="dataSourceName" value="loc/DBConn_XEDataSource"/>
          <config-property name="platformClassName" value="oracle.toplink.platform.database.Oracle9Platform"/>
          <config-property name="usesNativeSequencing" value="true"/>
          <config-property name="sequencePreallocationSize" value="50"/>
          <config-property name="defaultNChar" value="false"/>
          <config-property name="usesBatchWriting" value="true"/>
          <connection-pooling use="none">
          </connection-pooling>
          <security-config use="none">
          </security-config>
     </connector-factory>
     <connector-factory location="eis/DB/BPELSamples" connector-name="Database Adapter">
          <config-property name="xADataSourceName" value="jdbc/BPELSamplesDataSource"/>
          <config-property name="dataSourceName" value=""/>
          <config-property name="platformClassName" value="oracle.toplink.platform.database.Oracle9Platform"/>
          <config-property name="usesNativeSequencing" value="true"/>
          <config-property name="sequencePreallocationSize" value="50"/>
          <config-property name="defaultNChar" value="false"/>
          <config-property name="usesBatchWriting" value="false"/>
          <connection-pooling use="none">
          </connection-pooling>
          <security-config use="none">
          </security-config>
     </connector-factory>
</oc4j-connector-factories>
HOME \bpel\system\appserver\oc4j\j2ee\home\config
data-sources.xml
<?xml version="1.0" standalone='yes'?>
<!DOCTYPE data-sources PUBLIC "Orion data-sources" "http://xmlns.oracle.com/ias/dtds/data-sources-9_04.dtd">
<data-sources>



<connection-pool name="BPELPM_CONNECTION_POOL">
<connection-factory factory-class="oracle.lite.poljdbc.POLJDBCDriver"
user="system"
password="manager"
url="jdbc:[email protected]:1531:orabpel" />
</connection-pool>
<managed-data-source name="BPELServerDataSource"
connection-pool-name="BPELPM_CONNECTION_POOL"
jndi-name="jdbc/BPELServerDataSource" tx-level="global"/>
<managed-data-source name="BPELServerDataSourceWorkflow"
connection-pool-name="BPELPM_CONNECTION_POOL"
jndi-name="jdbc/BPELServerDataSourceWorkflow" tx-level="local"/>
<managed-data-source name="BPELSamplesDataSource"
connection-pool-name="BPELPM_CONNECTION_POOL"
jndi-name="jdbc/BPELSamplesDataSource" />
</data-sources>
DBAdapter wsdl file
GetData_WS.wsdl
<?xml version="1.0" encoding="UTF-8"?>
<definitions
name="GetData_WS"
targetNamespace="http://xmlns.oracle.com/pcbpel/adapter/db/GetData_WS/"
xmlns:tns="http://xmlns.oracle.com/pcbpel/adapter/db/GetData_WS/"
xmlns:plt="http://schemas.xmlsoap.org/ws/2003/05/partner-link/"
xmlns:jca="http://xmlns.oracle.com/pcbpel/wsdl/jca/"
xmlns:pc="http://xmlns.oracle.com/pcbpel/"
xmlns:top="http://xmlns.oracle.com/pcbpel/adapter/db/top/GetDataWS"
xmlns:hdr="http://xmlns.oracle.com/pcbpel/adapter/db/"
xmlns="http://schemas.xmlsoap.org/wsdl/">
<import namespace="http://xmlns.oracle.com/pcbpel/adapter/db/" location="DBAdapterOutboundHeader.wsdl"/>
<types>
<schema xmlns="http://www.w3.org/2001/XMLSchema">
<import namespace="http://xmlns.oracle.com/pcbpel/adapter/db/top/GetDataWS"
schemaLocation="GetDataWS_table.xsd"/>
</schema>
</types>
<message name="EmpDetailsViewCollection_msg">
<part name="EmpDetailsViewCollection" element="top:EmpDetailsViewCollection"/>
</message>
<message name="GetData_WSSelect_EMP_ID_inparameters">
<part name="GetData_WSSelect_EMP_ID_inparameters" element="top:GetData_WSSelect_EMP_IDInputParameters"/>
</message>
<portType name="GetData_WS_ptt">
<operation name="GetData_WSSelect_EMP_ID">
<input message="tns:GetData_WSSelect_EMP_ID_inparameters"/>
<output message="tns:EmpDetailsViewCollection_msg"/>
</operation>
</portType>
<binding name="GetData_WS_binding" type="tns:GetData_WS_ptt">
<jca:binding />
<operation name="GetData_WSSelect_EMP_ID">
<jca:operation
InteractionSpec="oracle.tip.adapter.db.DBReadInteractionSpec"
DescriptorName="GetDataWS.EmpDetailsView"
QueryName="GetData_WSSelect"
ReturnSingleResultSet="false"
MappingsMetaDataURL="GetDataWS_toplink_mappings.xml" />
<input>
<jca:header message="hdr:OutboundHeader_msg" part="outboundHeader"/>
</input>
</operation>
</binding>

<service name="GetData_WS">
<port name="GetData_WS_pt" binding="tns:GetData_WS_binding">
<jca:address location="eis/DB/DBConn_XE"
UIConnectionName="DBConn_XE"
     ManagedConnectionFactory="oracle.tip.adapter.db.DBManagedConnectionFactory"
     mcf.DriverClassName="oracle.jdbc.OracleDriver"
mcf.PlatformClassName="oracle.toplink.platform.database.oracle.OraclePlatform"
mcf.ConnectionString="jdbc:oracle:thin:@localhost:1521:xe"
mcf.UserName="hr"
mcf.Password="62C32F70E98297522AD97E15439FAC0E"
/>
</port>
</service>
<plt:partnerLinkType name="GetData_WS_plt" >
<plt:role name="GetData_WS_role" >
<plt:portType name="tns:GetData_WS_ptt" />
</plt:role>
</plt:partnerLinkType>
</definitions>
Thx,
DI

Urgent help with Pages 5.0 needed

Hi guys,
I need urgent help! I deleted Pages 5.0 (as I HATED it) but now can't open a very important document. Can someone please tell me how to reinstall it??
Thanks
Kellie

Downloading again is not as easy as that. you must find the app in the "Purchased" section of the
app store and I think you then must hold down the option key to reinstall it.
BTW, I only worked with one document as a trial for Pages 5 and then imported it to Word and saved it. I then deleted Pages 5 (I can't believe anyone who works with software would think that piece of worthless junk would sufice for anyone who uses a word processor professionally), reopened the Word document and saved it in Pages 09.
I hope this helps

Urgent Help with Planning Book

Hello Gurus,
Need your help with a very urgent issue. I cannot see my key figure values in my planning book(Interactive Planning). I could sucessfully generate my CVC, then initialised my planning area. Then when I go the interactive planning I can see all my characteristics -Ex Material master( has all values), Prod type has values, etc. Iam in DEV system and have to move the whole config to QA now. I have to validate that the config works in QA. Its works ok in the sandbox but I cannot figureout why I can not see the values for key figs that Iam loading from a Flat File. Please help!!!!!!

Hello Suresh,
I have one more question for you. Let me tell you my scenario. I have the client giving me a rough forecast for the future. I have to do stat forecast based on the history and check that against the initial forecast given by them. But, the problem I realised now is that when I go to my planning books I can see the values for 2008 in mothly buckets since I have 0calmonth. But the client gave me another file with forecast for 2008 in monthly buckets and for 2009 and 2010 in quarter buckets. So, i have a planning buck profile defined to meet that but, how do I upload the file with both 0calmonth and 0calquarter in a single file. Please let me know!! Urgent task.
Thanks again,
Chinna.

Urgent help with WRT110 Wireless connection

Similar Messages

Maybe you are looking for