Urgent Help WorkBench Tuxedo ART, Project BBVA Mexico

Xin Cao, or who can support us.
We are working on a draft Rehosting at BBVA Bancomer Mexico, along with Oracle Mexico through its representative (Javier Soto).
We have studied and analyzed for Tuxedo Art WorkBench converter, but when trying to convert some JCL (JES2) of BBVA that has the following execution utilities:
ACPMAIN
ADRDSSU
ADUUMAIN
AMUUMAIN
ASMA90
DFSRRC00
DMBATCH
DSICMULT
DSICOPY
DSN1COPY
FTP
ICEGENER
ICEMAN
IEV90
IEWL
IGYCRCTL
IKJEFT1A
IKJEFT1B
PASOEXT
PTLDRIVM
WTO
WorkBench sends error (XXXX Utility not supported) and not continuous.
The big question or concern that we have to continue the project is:
Is it possible to include these utilities in the WorkBench?
How would this be possible?
Or we would have to develop?
What can we do to not check WorkBench error and continue with the conversion?
Should we modify your program WorkBench (pob) to include new utilities?
How can we accomplish this?
This is the big question to continue this great project.
Greetings.

Some of these utilities are supported in the latest version (11.1.1.2.1 GA'd end of July), or can be replaced with supported utilities. What version of ART Workbench and Runtime are you using? You can connect with me directly for Tuxedo ART-related questions/help at [email protected]

Similar Messages

Urgent help needed - deadline - iDVD project suddenly gone corrupt?

Ive literally finished and ironed out the problems Ive had with a big Dual Layer project Ive been working on for 2 weeks.
Yesterday I successfully burned a project to DVD - and I had not been having any problems.
Then suddenly I tried another burn later in the day - and after all the encoding - iDVD ejected the blank DVD (before burning it) and appeared to freeze. The burn status bar remained complete saying project status: done. However iDVD was frozen like this - and the DVD is blank. I had to force quit as it would not respond.
I calmly tried again - same thing happened - it ejects the blank CD after encoding and freezes.
I decided to open a slightly different version of the iDVD project file I had also saved - and had the same problem....
So I tried to save a disc image instead - this time when I came back iDVD was gone - it had crashed and disappeared leaving no disc image.
I did some searching in this forum and I made some drive space and trashed my .plist files and repaired disc permissions.
I did another test burn this morning....SAME ISSUE - IDVD FROZE AND EJECTED THE BLANK DISC AFTER ENCODING....help! I have no idea what happened or what made it start behaving like this - I cant think of anything that changed on my system...and after all this work this bug has happened at the last hurdle....
Thanks in advance...

ok - so after all the above tinkering and OSX update, plist trashing and permission repairing as well as shifting assets to an internal drive - I set the iDVD project (which had previously burned ok) to burn again - and lo and behold - after the encoding - the same thing happened again...
The project encoded - and then right at the end - it just ejected the blank CD and stopped...
here is a picture of the resulting iDVD screen.
As you can see - it just says 'done'. And the CD is sitting ejected and blank. The media is a fresh disc Verbatim +R DL. If I close the player nothing happens.
If I press the 'cancel' button iDVD says 'cleaning up' and just sits there doing nothing. It does not register as 'not responding' in the 'force quit application menu' - but nothing happens.
This is a real mystery to me. So frustrating I have the project finished! Something weird has happened...
Hi Rich...this project is a regular 4:3 PAL format.
I did try making a new project similar to the one Im trying to burn - and got the same result. Ditto with older versions of the project...
I have just run the Disc 1 hardware test - 'no trouble' result.
I am re-installing 'bundled software' from disc 1. Then I need to sleep and try burning again tomorrow...
cheers

URGENT HELP BPC Park N Go does not work when VBA Project is protected

Hi
I am using NW BPC 7.5 client sp07 and the park n go feature show a dialog box with the message to disable VBA Protection but I need the protection, is there a work around.
Urgent help project is meant to be signed off today.
Thanks

Hi
Yes we are using native excel protection but having it protected in excel or not has no effect on the vba project being locked and the trust access with vba option is enabled, the MS version worked with vba password but only after we unlocked it and took the files offline n then online again to get the temp files added to the vba project n then protected it again. This workaround does not work in NW.
Thanks for your replies.

Need urgent help in listing out checklist from DBA prespective for BI Implementation Project

Hello Guys,
We are in Designing phase Data Modeling of PDW/APS Implementation Project.
I need urgent help in making a checklist from a DBA perspective.
Like what are things ill be needing at a time of implementation/Deployment.
Your expert comments and help will be highly appreciated.
Thank you,
Anish.S
Asandeen

You can get good summary of checklist from this article about
DBA checklist for data warehousing.
Which highlights on below pointers:
New system or old. (I.e. Up-gradation vs starting from scratch)
Complexity of SQL Server architecture
SQL Server storage
Determining SQL Server processing power
SQL Server installation consideration
SQL Server configuration parameter
SQL Server security
SQL Server Database property
SQL Server jobs and automation
Protecting SQL Server data
SQL Server health monitoring and check ups
SQL Server ownership and control
based on my real time experience, I will suggest you to keep an eye on
Load performance (It will be useful when your database(Warehouse) will have huge amount of data)
System availability (Check for Windows update and up time configuration)
Deployment methodology should be planned in advance. Development of packages and respective objects should be done systematically.
Source control mechanism
Disk space and memory usage
You might or might not have full rights on production environment, so be prepared to analyze production environment via Select statements [I guess you got my point]
Proper implementation of Landing , Staging and Mart tables.
Column size (this can drastically decrease your database size)
Usage of indexes (Index are good, but at what cost?)
I hope this will assist you in building your check list.

Urgent help!!!!!!Regarding the Credit Memo for oracle project customer invoices

Hi,
Can somebody help me in this issue
we have a requirement from the users that they dont want the system to apply
the credit memo automatically on the invoice when it released from the projects
Scenario1: Invoice already been paid now they want to create a credit memo,
system dont allow them to cancel the invoice the only way as per the theory is
create a negative invoice and adjust it but the issue here is when ever you
create a negative invoice it creates as invoice not credit memo which will be
confusing to the users.
in this case can we use billing extension to create the transaction type as
credit memo when ever the invoice has negative amount?
Or let me know if there is a way to perform this step?
Scenario2: Invoice is created but they dont want to create a credit memo
against that invoice since it gets applied automatically, the customer
requirment will be they want to apply the credit memo for any future invoices
as requested
Is there a wya to have a credit memo created with out auto applying to an
invoice, so that user can apply when ever they want
what is credit memo on accoutn how it works with these above scenarios.
sicne i tried setting up but the credit meo or concession is getting appled to
the particular invoice automatically
need urgent help required on this issue !!!!!
Regards
Lavanya

Hi,
For Scenario 1 you have two options:
1) Update the AR transaction type extension for project invoice- Identify negative amount invoice and change the transaction type to project credit memo. This will update the transaction type on negative invoices before they are interfaced to Oracle AR.
This is preferred option
2) Update AR invoice Pre-processor to do the same thing.
There is no standard setup which will allow you to change trx type of negative invoices.
For Scenario2 - I dont think there is any direct way to create a credit invoice from Projects and keep it unapplied (again, apart from creating a negative amount invoice). You can create a credit memo in AR and use it to apply against future invoices.
Regards
Kaushal

[URGENT HELP NEEDED] Premiere Pro CS6 failed rendering

Hello!
I`ll try to make this quick because I need help asap. I`ve been starting to make YouTube gaming videos 3 weeks ago and my channel is growing up pretty fast. I promised I would make a video everyday but it`s been a full week since I couldn`t upload because I was busy and when I tried to render it failed.
Anyway here`s how it goes.I`ve recorded with fraps some gameplay footage with the resolution of 1360x706. One of my friends reccommanded me Adobe Premiere Pro for editing so I`m using the trial version of CS6. I create a new project and choose a format of 720 25 (cant really remember the exact name). I then import my recorded files and when I place them in the sequence it tells me the resolution is different and asks me if I want to change the sequence settings according to the files. Usually, I ignore it and when I export the Media I just tick the option: "Scale to Fill" and that usually works just fine, quality HD on YT...
But this week it has driven me crazy, I really don`t want to explain how much stress and dissapointment this has caused to me because I think I`ll end up raging...I`ll just tell you I`ve been trying for a couple of days more than 7 time to render the project(each time it takes about an hour and a bit more, so let`s just call it 7 hours wasted). The problem actually is that when I check the output file after exporting the media, the file size is ONLY 24 bytes!!! Other times the file size gets to like half of the one that should be or less, but mainly the render even so takes up a normal length of time of processing but in the end the file is only 24 bytes..Thing is I don`t encounter any error whatsoever...
I really need some urgent help!
Thanks!

1st, some FRAPS information
These are for Premiere Elements, but may help with PPro
Fraps & Elements http://forums.adobe.com/thread/871095
-and more Elements http://forums.adobe.com/thread/943772
-and yet more Elements http://forums.adobe.com/thread/967201
2nd, it is REALLY better to have your project sequence match your video
Please NOTE that the PPro CS6 screen may look a bit different (I use CS5)
For CS5 and later, the easy way to insure that your video and your project match
See 2nd post for picture of NEW ITEM process http://forums.adobe.com/thread/872666
-and a FAQ on sequence setting http://forums.adobe.com/message/3804341

URGENT HELP NEEDED!!! (Almost a matter of life and death)

Well, it's more of a matter of failing a course or not...
Anyway, my Java professor gave us some labs to do. I know Java front and back, at least, whatever version I learned a few years back. This is my first tenure with the Scanner object, and it's messing me up.
I'm using Eclipse for my project. I have three files in the source folder, ABC_Manufacturing.java, mseast.dat and mswest.dat. Now, when I try to instanciate a new Scanner object, it won't find the files:
Scanner east = new Scanner(new FileReader("mseast.dat"));
Scanner west = new Scanner(new File("mswest.dat"));
I'm trying two seperate ways to do this. Neither are working, this is the error I get:
Exception in thread "main" java.lang.Error: Unresolved compilation problems:
     Unhandled exception type FileNotFoundException
     Unhandled exception type FileNotFoundException
     at ABC_Manufacturing.main(ABC_Manufacturing.java:38)
Now, I added these files OVER and OVER again. I added them. I created new files and pasted the contents in there. I used .txt files. All the same error. It's like it just won't take the time out to look for the files that are RIGHT IN THE DAMN PROJECT! Then I tried using a complete path, using C:\Java\whatever. SAME ERROR!!!!
Please, I need urgent help. This is due tomorrow at noon, and I have no idea what to do at this point. I can't really continue, because at this point its just looking at what prints out and formatting it, and I don't want to do that without testing to see if my code to convert the file data into arrays work. You dig? Thanks for any and all help, and I'm going to kill my professor...she spent a week going over parallel arrays but did nothing to show us how to import files into projects or use the scanner class. Also it doesn't help that at uni we have to use emacs, which I don't use at home.

d00erino wrote:
This is the the main class, so far:
public static void main(String[] args)throws IOException
          Scanner west = new Scanner(new File("mswest.dat"));
          int [] eastParts = new int[13];
          int [] eastQuant = new int[13];
          int [] westParts = new int[17];
          int [] westQuant = new int[17];
          System.out.print(west.nextInt());
And I didn't ignore that one guy (sorry, don't remember your username) I tried you and the other guy's responce. Both didn't work. I dunno how to get around errors. Figures, you don't learn that in the course but she'll spend a week on parallel arrays...Ok, well that can't possibly be complaining with the same error message you got before, so now you need to be (more) specific about what "didn't work" means.

Urgent help needed... PL/SQL Insert statement

Hi...
I need some urgent help on this project. I have a 2 column table with values that need to be inserted into another existing table which has a sequence.
This is the 2 column table:
FUND YEAR
29587 05
29587 07
Existing table:
Name Null? Type
LIST_ID NOT NULL NUMBER(6) -- This is a sequence
WEB_USER_ID NOT NULL VARCHAR2(10)
RESOURCE_TYPE NOT NULL VARCHAR2(8)
LIST_TYPE NOT NULL VARCHAR2(10)
LIST_NAME NOT NULL VARCHAR2(50)
LIST_CODE_1 NOT NULL VARCHAR2(6) -- FUND from table above
LIST_CODE_2 NOT NULL VARCHAR2(6) -- YEAR from table above
LIST_CODE_3 NOT NULL VARCHAR2(6)
LAST_UPDATED_DT NOT NULL DATE
LAST_UPDATED_BY NOT NULL VARCHAR2(10)
LIST_CODE_4 NOT NULL VARCHAR2(20)
The columns from table 1 (FUND, YEAR) correspond to columns (LIST_CODE_1, LIST_CODE_2) in table 2. The column LIST_ID is a sequence. I can put in sysdate for LAST_UPDATED_DT and my initials SN for LAST_UPDATED_BY. This is going to be for 2 unique WEB_USER_IDs which would be in the WHERE clause. I will be inserting 2200 rows for each id. A single insert statement would look like this -
INSERT INTO EXISTING_TBL (list_id,web_user_id,resource_type,list_type,list_name,list_code_1,list_code_2,list_code_3,list_code_4,last_updated_dt,last_updated_by) VALUES ('470027','WEBUSER','GL','FUNDFYF',' FUND BALANCE SUM','12010','01',' ',' ',{ts '2010-5-19 10:16:9'},'SN')
How would I do this to insert the 2200 values from my 2 column table to the existing table?
All help is greatly appreciated!!
SN

Hello ,
I think this will work
INSERT INTO TABLE2
     LIST_ID,
     WEB_USER_ID,
     RESOURCE_TYPE,
     LIST_TYPE,
     LIST_NAME,
     LIST_CODE_1,
     LIST_CODE_2,
     LIST_CODE_3,
     LIST_CODE_4,
     LAST_UPDATED_DT,
     LAST_UPDATED_BY
SELECT
     SEQ.NEXTVAL,
     FUND,
     YEAR,
     <VALUE FOR RESOURCE_TYPE>,
     <VALUE FOR LIST_TYPE>,
     <VALUE FOR LIST_NAME>,
     <VALUE FOR LIST_CODE_1>,
     <VALUE FOR LIST_CODE_2>,
     <VALUE FOR LIST_CODE_3>,
     <VALUE FOR LIST_CODE_4>,
     SYSDATE,
     'SN'
FROM
     TABLE1
REGARDS
Rahul Sharma

Urgent Help Required - Video Not playing on IE11 and Firefox

Hi,
I need Urgent Help , I am trying to Play this Presentation on IE 11 and Firefox and it doesn't play the Video part which is FLV and f4v formats.
I have been googeling it but couldn't find a solution so far ,Can anyone please help , its really urgent as I am done with the Project ,and this is the last bit which I have been struggling with for a while now.
Here is the HTML Code I am using :
<----------------------------------------------------------------------------------------- ----------------------------------------------------------------->
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
<html xmlns="http://www.w3.org/1999/xhtml" lang="en" xml:lang="en">
<head>
<title>index</title>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<style type="text/css" media="screen">
html, body { height:100%; background-color: #ffffff;}
body { margin:0; padding:0; overflow:hidden; }
#flashContent { width:100%; height:100%; }
</style>
</head>
<body>
<div id="flashContent">
   <object classid="clsid:d27cdb6e-ae6d-11cf-96b8-444553540000" width="800" height="600" id="index" align="middle">
    <param name="movie" value="index.swf" />
    <param name="quality" value="high" />
    <param name="bgcolor" value="#ffffff" />
    <param name="play" value="true" />
    <param name="loop" value="true" />
    <param name="wmode" value="window" />
    <param name="scale" value="showall" />
    <param name="menu" value="true" />
    <param name="devicefont" value="false" />
    <param name="salign" value="" />
    <param name="allowScriptAccess" value="sameDomain" />
    
    <object type="application/x-shockwave-flash" data="index.swf" width="800" height="600">
     <param name="movie" value="index.swf" />
     <param name="quality" value="high" />
     <param name="bgcolor" value="#ffffff" />
     <param name="play" value="true" />
     <param name="loop" value="true" />
     <param name="wmode" value="window" />
     <param name="scale" value="showall" />
     <param name="menu" value="true" />
     <param name="devicefont" value="false" />
     <param name="salign" value="" />
     <param name="allowScriptAccess" value="sameDomain" />
    
     <a href="http://www.adobe.com/go/getflash">
      <img src="http://www.adobe.com/images/shared/download_buttons/get_flash_player.gif" alt="Get Adobe Flash player" />
     </a>
    
    </object>
    
   </object>
</div>
</body>
</html>
<----------------------------------------------------------------------------------------- ----------------------------------------------------------------->

Any Help in this Regards will be highly appreciated

Urgent Help Required for Connect Four Game

Hi all,
I am a student and I have a project due 20th of this month, I mean May 20, 2007 after 8 days. The project is about creating a Connect Four Game. I have found some code examples on the internet which helped me little bit. But there are lot of problems I am facing developing the whole game. I have drawn the Board and the two players can play. The players numbers can fill the board, but I have problem implementing the winner for the game. I need to implement the hasWon() method for Horizontal win, Vertical win and Diagonal win. I also found some code examples on the net but I was unable to make it working. I have 5 classes and one interface which I m implementing. The main problem is how to implement the hasWon() method in the PlayGame class below with Horizontal, vertical and diagonal moves.
Sorry there is so much code.
This the interface I must implement, but now I am only implementing the int move() of this interface. I will implement the rest later after solving the winner problem with your help.
Interface code..............
interface Player {
void init (Boolean color);
String name ();
int move ();
void inform (int i);
Player1 class......................
import java.util.*;
import java.io.*;
import javax.swing.*;
public class Player1 implements Player
public Player1()
public int move()
Scanner scan = new Scanner(System.in);
// BufferedReader stdin = new BufferedReader (new InputStreamReader(System.in));
int player1;
System.out.println ("What is your Number, player 1?");
player1 = scan.nextInt();
System.out.println ("Hey number"+player1+" are you prepared to CONNECT FOUR");
System.out.println();
return player1;
//Player.move();
//return player1;
}//end move method
public void init (Boolean color)
public void inform (int i)
public String name()
return "Koonda";
}//end player1 class
Player2 class...........................
import java.util.*;
import java.io.*;
import javax.swing.*;
public class Player2 implements Player
public int move()
//int cup0,cup1,cup2,cup3,cup4,cup5,cup6;
// cup0=5;cup1=5;cup2=5;cup3=5;cup4=5;cup5=5;cup6=5;
//int num1, num2;
Scanner scan = new Scanner(System.in);
// BufferedReader stdin = new BufferedReader (new InputStreamReader(System.in));
int player2;
System.out.println ("What is your Number, player 2?");
player2 = scan.nextInt();
System.out.println ("Hey "+player2+" are you prepared to CONNECT FOUR");
System.out.println();
//return player1;
return player2;
}//end move method
public void init (Boolean color)
public void inform (int i)
public String name()
return "malook";
}//end player1 class
PlayGame class which contains all the functionality.........................................................
import java.util.*;
import java.io.*;
import javax.swing.*;
public class PlayGame
//Player player1;
//Player player2;
int [][]ConnectFourArray;
boolean status;
int winner;
     int player1;
     int player2;
     public PlayGame()
          //this.player1 = player1;
          //this.player2 = player2;
     public void StartGame()
     try{
     // int X = 0, Y = 0;
     //int value;
     int cup0,cup1,cup2,cup3,cup4,cup5,cup6;
cup0=5;cup1=5;cup2=5;cup3=5;cup4=5;cup5=5;cup6=5;
     int[][] ConnectFourArray = new int[6][7];
     int num1, num2;
     for(int limit=21;limit!=0;limit--)
BufferedReader selecter = new BufferedReader (new InputStreamReader(System.in));
String column1;
System.out.println();
for ( int row=0; row < ConnectFourArray.length; row++ ){
System.out.print("Row " + row + ": ");
for ( int col=0; col < ConnectFourArray[row].length; col++ )
System.out.print( ConnectFourArray[row][col] + " ");
System.out.println();
System.out.println();
System.out.println ("Please Select a column of 0 through 6 ");
column1 = selecter.readLine();
num1= Integer.parseInt(column1);
System.out.println();
if (num1==0){
ConnectFourArray[cup0][0]=1;
cup0=cup0-1;
else if (num1==1){
ConnectFourArray[cup1][1]=1;
cup1=cup1-1;
else if (num1==2){
ConnectFourArray[cup2][2]=1;
cup2=cup2-1;
else if (num1==3){
ConnectFourArray[cup3][3]=1;
cup3=cup3-1;
else if (num1==4){
ConnectFourArray[cup4][4]=1;
cup4=cup4-1;
else if (num1==5){
ConnectFourArray[cup5][5]=1;
cup5=cup5-1;
else if (num1==6){
ConnectFourArray[cup6][6]=1;
cup6=cup6-1;
System.out.println();
BufferedReader selecter2 = new BufferedReader (new InputStreamReader(System.in));
String column2;
System.out.println();
for ( int row=0; row < ConnectFourArray.length; row++ ){
System.out.print("Row " + row + ": ");
for ( int col=0; col < ConnectFourArray[row].length; col++ )
System.out.print( ConnectFourArray[row][col] + " ");
System.out.println();
System.out.println();
System.out.println ("Please Select a column of 0 through 6 ");
column1 = selecter.readLine();
num1= Integer.parseInt(column1);
System.out.println();
if (num1==0){
ConnectFourArray[cup0][0]=2;
cup0=cup0-1;
else if (num1==1){
ConnectFourArray[cup1][1]=2;
cup1=cup1-1;
else if (num1==2){
ConnectFourArray[cup2][2]=2;
cup2=cup2-1;
else if (num1==3){
ConnectFourArray[cup3][3]=2;
cup3=cup3-1;
else if (num1==4){
ConnectFourArray[cup4][4]=2;
cup4=cup4-1;
else if (num1==5){
ConnectFourArray[cup5][5]=2;
cup5=cup5-1;
else if (num1==6){
ConnectFourArray[cup6][6]=2;
cup6=cup6-1;
System.out.println();
System.out.println();
catch (Exception E){
System.out.println("Error with input");
System.out.println("Would you like to play again");
try{
String value;
BufferedReader reader = new BufferedReader (new InputStreamReader(System.in));
// Scanner scan = new Scanner(System.in);
System.out.println("Enter yes to play or no to quit");
// value = scan.nextLine();
// String value2;
value = reader.readLine();
//value2 = reader.readLine();
if (value.equals("yes"))
System.out.println("Start again");
StartGame(); // calling the StartGame method to play a game once more
else if (value.equals("no"))
System.out.println("No more games to play");
// System.exit(0);
else
System.exit(0);
System.out.println();
catch (Exception e){
System.out.println("Error with input");
finally
System.out.println(" playing done");
//StartGame();
//check for horizontal win
public int hasWon()
int status = 0;
for (int row=0; row<6; row++)
for (int col=0; col<4; col++)
if (ConnectFourArray[col][row] != 0 &&
ConnectFourArray[col][row] == ConnectFourArray[col+1][row] &&
ConnectFourArray[col][row] == ConnectFourArray[col+2][row] &&
ConnectFourArray[col][row] == ConnectFourArray[col+3][row])
//status = true;//int winner;
if(status == player1)
System.out.println("Player 1 is the winner");
else if(status == player2)
System.out.println("Player 2 is the winner" );
}//end inner for loop
}// end outer for loop
} // end method Winner
return status;
}//end class
ClassConnectFour which designs the board........................
import java.util.*;
import java.io.*;
import javax.swing.*;
public class ClassConnectFour
     //Player player1;
     //Player player2;
     public ClassConnectFour()
          //this.player1 = player1;
public void DrawBoard()
int[][] ConnectFourArray = new int[6][7] ;
for ( int row=0; row < ConnectFourArray.length; row++ ){
System.out.print("Row " + row + ": ");
for ( int col=0; col < ConnectFourArray[row].length; col++ )
System.out.print( ConnectFourArray[row][col] + " ");
System.out.println();
System.out.println();
}//end class
TestConnetFour class which uses most of the above class..................
import java.util.*;
import java.io.*;
import javax.swing.*;
public class TestConnectFour
public static void main(String[] args)
ClassConnectFour cf = new ClassConnectFour();
cf.DrawBoard();
Player1 player1 = new Player1();
Player2 player2 = new Player2();
player1.move();
player2.move();
System.out.println("Number 1 belongs to player " + player1.name());
System.out.println("Number 2 belongs to player " + player2.name());
PlayGame pg = new PlayGame();
pg.StartGame();
pg.hasWon();
//pg.Play();
//System.out.println(player.name());
//System.out.println(player2.name());
}// end main
}//end class
I am sorry for all this junk code but I only understand it this way. Your urgent help is required. Looking forward to your reply.
Thanks in advance.
Koonda
//

Hi,
Thanks for your help but I really don't understand the table lookup algorithm. Could you please send me some code to implement that.
I will send you the formatted code as well
Thanks for your help.
looking forward to your reply.
Koonda
Hi all,
I am a student and I have a project due 20th of this month, I mean May 20, 2007 after 8 days. The project is about creating a Connect Four Game. I have found some code examples on the internet which helped me little bit. But there are lot of problems I am facing developing the whole game. I have drawn the Board and the two players can play. The players numbers can fill the board, but I have problem implementing the winner for the game. I need to implement the hasWon() method for Horizontal win, Vertical win and Diagonal win. I also found some code examples on the net but I was unable to make it working. I have 5 classes and one interface which I m implementing. The main problem is how to implement the hasWon() method in the PlayGame class below with Horizontal, vertical and diagonal moves.
Sorry there is so much code.
This the interface I must implement, but now I am only implementing the int move() of this interface. I will implement the rest later after solving the winner problem with your help.
Interface code..............
interface Player {
void init (Boolean color);
String name ();
int move ();
void inform (int i);
Player1 class......................
import java.util.*;
import java.io.*;
import javax.swing.*;
public class Player1 implements Player
public Player1()
public int move()
Scanner scan = new Scanner(System.in);
// BufferedReader stdin = new BufferedReader (new InputStreamReader(System.in));
int player1;
System.out.println ("What is your Number, player 1?");
player1 = scan.nextInt();
System.out.println ("Hey number"+player1+" are you prepared to CONNECT FOUR");
System.out.println();
return player1;
//Player.move();
//return player1;
}//end move method
public void init (Boolean color)
public void inform (int i)
public String name()
return "Koonda";
}//end player1 class
Player2 class...........................
import java.util.*;
import java.io.*;
import javax.swing.*;
public class Player2 implements Player
public int move()
//int cup0,cup1,cup2,cup3,cup4,cup5,cup6;
// cup0=5;cup1=5;cup2=5;cup3=5;cup4=5;cup5=5;cup6=5;
//int num1, num2;
Scanner scan = new Scanner(System.in);
// BufferedReader stdin = new BufferedReader (new InputStreamReader(System.in));
int player2;
System.out.println ("What is your Number, player 2?");
player2 = scan.nextInt();
System.out.println ("Hey "+player2+" are you prepared to CONNECT FOUR");
System.out.println();
//return player1;
return player2;
}//end move method
public void init (Boolean color)
public void inform (int i)
public String name()
return "malook";
}//end player1 class
PlayGame class which contains all the functionality.........................................................
import java.util.*;
import java.io.*;
import javax.swing.*;
public class PlayGame
//Player player1;
//Player player2;
int [][]ConnectFourArray;
boolean status;
int winner;
int player1;
int player2;
public PlayGame()
//this.player1 = player1;
//this.player2 = player2;
public void StartGame()
try{
// int X = 0, Y = 0;
//int value;
int cup0,cup1,cup2,cup3,cup4,cup5,cup6;
cup0=5;cup1=5;cup2=5;cup3=5;cup4=5;cup5=5;cup6=5;
int[][] ConnectFourArray = new int[6][7];
int num1, num2;
for(int limit=21;limit!=0;limit--)
BufferedReader selecter = new BufferedReader (new InputStreamReader(System.in));
String column1;
System.out.println();
for ( int row=0; row < ConnectFourArray.length; row++ ){
System.out.print("Row " + row + ": ");
for ( int col=0; col < ConnectFourArray[row].length; col++ )
System.out.print( ConnectFourArray[row][col] + " ");
System.out.println();
System.out.println();
System.out.println ("Please Select a column of 0 through 6 ");
column1 = selecter.readLine();
num1= Integer.parseInt(column1);
System.out.println();
if (num1==0){
ConnectFourArray[cup0][0]=1;
cup0=cup0-1;
else if (num1==1){
ConnectFourArray[cup1][1]=1;
cup1=cup1-1;
else if (num1==2){
ConnectFourArray[cup2][2]=1;
cup2=cup2-1;
else if (num1==3){
ConnectFourArray[cup3][3]=1;
cup3=cup3-1;
else if (num1==4){
ConnectFourArray[cup4][4]=1;
cup4=cup4-1;
else if (num1==5){
ConnectFourArray[cup5][5]=1;
cup5=cup5-1;
else if (num1==6){
ConnectFourArray[cup6][6]=1;
cup6=cup6-1;
System.out.println();
BufferedReader selecter2 = new BufferedReader (new InputStreamReader(System.in));
String column2;
System.out.println();
for ( int row=0; row < ConnectFourArray.length; row++ ){
System.out.print("Row " + row + ": ");
for ( int col=0; col < ConnectFourArray[row].length; col++ )
System.out.print( ConnectFourArray[row][col] + " ");
System.out.println();
System.out.println();
System.out.println ("Please Select a column of 0 through 6 ");
column1 = selecter.readLine();
num1= Integer.parseInt(column1);
System.out.println();
if (num1==0){
ConnectFourArray[cup0][0]=2;
cup0=cup0-1;
else if (num1==1){
ConnectFourArray[cup1][1]=2;
cup1=cup1-1;
else if (num1==2){
ConnectFourArray[cup2][2]=2;
cup2=cup2-1;
else if (num1==3){
ConnectFourArray[cup3][3]=2;
cup3=cup3-1;
else if (num1==4){
ConnectFourArray[cup4][4]=2;
cup4=cup4-1;
else if (num1==5){
ConnectFourArray[cup5][5]=2;
cup5=cup5-1;
else if (num1==6){
ConnectFourArray[cup6][6]=2;
cup6=cup6-1;
System.out.println();
System.out.println();
catch (Exception E){
System.out.println("Error with input");
System.out.println("Would you like to play again");
try{
String value;
BufferedReader reader = new BufferedReader (new InputStreamReader(System.in));
// Scanner scan = new Scanner(System.in);
System.out.println("Enter yes to play or no to quit");
// value = scan.nextLine();
// String value2;
value = reader.readLine();
//value2 = reader.readLine();
if (value.equals("yes"))
System.out.println("Start again");
StartGame(); // calling the StartGame method to play a game once more
else if (value.equals("no"))
System.out.println("No more games to play");
// System.exit(0);
else
System.exit(0);
System.out.println();
catch (Exception e){
System.out.println("Error with input");
finally
System.out.println(" playing done");
//StartGame();
//check for horizontal win
public int hasWon()
int status = 0;
for (int row=0; row<6; row++)
for (int col=0; col<4; col++)
if (ConnectFourArray[col][row] != 0 &&
ConnectFourArray[col][row] == ConnectFourArray[col+1][row] &&
ConnectFourArray[col][row] == ConnectFourArray[col+2][row] &&
ConnectFourArray[col][row] == ConnectFourArray[col+3][row])
//status = true;//int winner;
if(status == player1)
System.out.println("Player 1 is the winner");
else if(status == player2)
System.out.println("Player 2 is the winner" );
}//end inner for loop
}// end outer for loop
} // end method Winner
return status;
}//end class
ClassConnectFour which designs the board........................
import java.util.*;
import java.io.*;
import javax.swing.*;
public class ClassConnectFour
//Player player1;
//Player player2;
public ClassConnectFour()
//this.player1 = player1;
public void DrawBoard()
int[][] ConnectFourArray = new int[6][7] ;
for ( int row=0; row < ConnectFourArray.length; row++ ){
System.out.print("Row " + row + ": ");
for ( int col=0; col < ConnectFourArray[row].length; col++ )
System.out.print( ConnectFourArray[row][col] + " ");
System.out.println();
System.out.println();
}//end class
TestConnetFour class which uses most of the above class..................
import java.util.*;
import java.io.*;
import javax.swing.*;
public class TestConnectFour
public static void main(String[] args)
ClassConnectFour cf = new ClassConnectFour();
cf.DrawBoard();
Player1 player1 = new Player1();
Player2 player2 = new Player2();
player1.move();
player2.move();
System.out.println("Number 1 belongs to player " + player1.name());
System.out.println("Number 2 belongs to player " + player2.name());
PlayGame pg = new PlayGame();
pg.StartGame();
pg.hasWon();
//pg.Play();
//System.out.println(player.name());
//System.out.println(player2.name());
}// end main
}//end classI am sorry for all this junk code but I only understand it this way. Your urgent help is required. Looking forward to your reply.
Thanks in advance.
Koonda

Need urgent help with HSDIO hardware timing

Hi everyone,
I need urgent help regarding HSDIO hardware timing. I've been working in a project which generating serial ramp using HSDIO pxie device.
I'm using clock rate 40MHz and generating 14 bit of boolean for each step of ramp. And I have to generate simply 256 steps ramp.
Which means, 256 (steps) x 14 (boolean array) x 25 ns (period of 1 boolean value) = 89,6 ns.
What I'm doing right now is with using index of FOR loop as my input data (converting the index into 14bit boolean), then write into pxie device in every iteration,
which means, my data is getting into output in every 1ms time, right? (I'm using windows)
And I want to be able to generate faster than that.
How can I prewrite my 256 steps ramp, then write them all at once into pxie device. I'm really stuck here.
In the picture can you see how I do the write into device in every iteration of FOR Loop.
Regards,
Yan.

hi, thanks for responding.
with using example of dynamic generation with script, I can manage to generate the ramp with controllable delay (generate the whole waveform, including delay with script command, then write to the card).
But I still have 1 question, I can test the output of the generation using oscilloscope and cant see the start delay (I'm writing delay at the start, before generating the ramp). My signal generated at 0 sec.
How can I check this start delay? is there any good example delivered with Labview to check this generation? Somehow I cant use the "dynamic generation and acquisition" example to see my generation (cant figure out how to capture the generated signal).
regards,
Yan.

Urgent Help no sound

Urgent Help required
G4 power book latest IMove 6 updated etc
Started to edit an existing project to day, but cant here any of my imported audio, blue boxes ticked etc. Quit the project, ran disk utilities no problems restarted still no Audio. Opened 6 other projects no sound on them either
Very puzzled, Have made 70 or more IMoves in the past so am not a beginner !
Any suggestion as am due to start a new project tomorrow
James

I posted this same answer in iDVD for you...
I am not sure it will fix all of your problems, but I would certainly try deleting the preference files for iDVD. (Don't worry-new ones will be made once you open the program again)
Close all iLife Applications.
Go to Users / Library / Preferences / com.apple.iDVD.plist
Drag it to the trash, empty the trash, run disk utility to repair permissions, re-boot and it should work.
Then do the same for the imovie prefences.
Sue

Need urgent help on J2ME Bluetooth.

Hi all,
I really need help about run example code of j2me bluetooth.
I'm doing a MSc project about bluetooth for delivery system, I just want to use bluetooth to send an object to PDA.
I,ve tried example on "Bluetooth for Java" with Atinav library but, it couldn't work.
Do you have an example code that can run on NetBeans 5.0 with
- AvetanaBluetooth Library (purchased)
or
- normal Bluetooth.java library
I need some examples for develop on it. and also please advice me on how to run and test the programs. I really need urgent help Please help me. my email is [email protected] or [email protected]

Hi Hari,
I think that the logic needs to be build up in the DISP part of the Search help exit.
What you can do is also get the Plant in the search help as an export parameter.
Then in the Return Tab you can check if the plant = 'AA', delete the data.
e.g.
      LOOP AT record_tab.
        IF RECORD_TAB-STRING+22(2) = '90'.
          DELETE record_tab INDEX sy-tabix.
        ENDIF.
      ENDLOOP.
Hope this helps.
Regards,
Himanshu
Message was edited by:
        Himanshu Aggarwal

Regarding DMS configuration - urgent help

Hi,
I need urgent help with the below scenario.
I created one document,attached a drawing,now i want to submit to a higher level authority using workflow who can approve/reject.how do i do this.
Also i would like to create two vaults Vault A and Vault B ,user A has read/write to vault A and user B has read/write to only Vault B ,but user C has read.write to both vaults.
Please let me know how do i create users,configure vaults and give permissions.
thanks
prasad suresh

first u have to create status for approval
i give u one example of it
first u have to create different stauts for approval process
for this u have to configure in SPRO with the relevant document type
and give the proper authorization in PFCG to relavant user , who create the doc and who chek and who released the doc
read this carefully , i made this kind of approval process in my project
1 --- "CR"   means "Create" by document Creater
2 --- "Ch"   "Checked" by X authority    / if any mistake found then "R1"    "Rework" by X authority
3 --- "Re"   " Released" by Y authority / if any mistake found then "R2"    "Rework" by Y authority
think that there is three stage for approval of any drawing
first stage -
document creat   (Draft Man Creat Drawing and attached )
                          at that time document status is "Cr" after creating doc , that DIR info is sent to higher
                          authority using document distribution functionality
second stage----- document checker (Receive document from Draft Man in SAP Inbox)
                           he chek that drawing (DIR) . if there is not any other mistake than it again
                          follow the cycle of document distribution to his higher authority. this time
                            document status updated from " Cr " to " Ch" means from "creat" to "checked "
                            if any mistake found than he change status "Cr" to "R1" means
                            create to rework and send it back to drafts man
                             and drafts man again modify drawing and modify status "R1" to "Cr"
                             and send it to higher authority
third stage -
    document aprover (Receive document from document checker in SAP Inbox)
                           he chek that drawing (DIR) . if there is not any other mistake than he update
                            document status from " Ch" to "Re" means from "checked " to "Released"
                            if any mistake found than he change status "ch" to "R2" means
                            checked to rework and send it back to drafts man
                             and drafts man again modify drawing and modify status "R2" to "Cr"
                             and send it to higher authority
and in second question , pls tell me clear what u wana do
vaults means what ?
is it Repository or what ?
give me idea by some example

Urgent help database design

Hi,
I need an urgent help with the design of the database, We have already a database in production but we are facing a problem with extensibility.
The client information is variant that is
1) number of fields are different for each client
2) client may ask anytime in future to add another field into the table
Please provide your views with practical implication (advantages and disadvantages) or any resource where I can find information.....
Help appreciated.....

Hi,
Database design is an art & science by itself - as far as I know, there aren't any rigid rules.
I would suggest that you have a look at the discussions in these two threads for a few general ideas :
Database Design
conversion from number to character
If your client requirements keep changing, I would suggest that you keep 8- 10 "spare" columns in your tables - just call them spare1, spare2, etc.. The only purpose of these tables is to allow flexibility in the design - i.e.., in future you can always extend the table to accommodate more fields.
I have used it a couple of times & found it to be useful - again, this is only a suggestion.
Regards,
Sandeep

Urgent Help WorkBench Tuxedo ART, Project BBVA Mexico

Similar Messages

Maybe you are looking for