URGENT HORA-03111 error - a detailed explaination and workaround would help

We are at a customer location where we are hitting this issue of
ORA-03111 for a 10.2.0.3 DB .
We are using a proprietary Appliance to push data to and out of the said DB and hitting this error.
The erros are
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
ORA-03111 “break received on communication channel” related to a DELETE statement;
ORA-01006 “bind variable does not exist” related to a stored procedure execution.
If we restart all appliances there are no more access db error.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
This cause the unsuccessful of writing of presence messages on database.

If we restart all appliances there are no more access
db error.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~
This cause the unsuccessful of writing of presence
messages on database.I don't seem to understand these two last sentences, could you please rephrase them?
~ Madrid

Similar Messages

SMB networking issue in 10.5.2 - detailed analysis and cry for help

I am a computer technician for a medium-sized company. Our setup in the company is mainly Windows-based, using Active Directory and Windows Server 2003 on our file servers, with a fully Gigabit network. We also have about a dozen Macs, mostly Mac Pros but some PowerMac G5s and a few MacBooks here and there.
In the past few weeks, we've started seeing an issue on some of the computers relating to transferring large files from the Macs to the file server. This generally only applies to files over 1GB in size, but sometimes it can even happen with files of a few hundred megabytes. What is happening is that when the Mac starts up, the first couple of times a user will transfer a file of this size to the server over SMB, it will act normally. Eventually (usually anywhere from the third to the seventh transfer of a file that size) a file transfer will stall out. It doesn't stop completely, but it begins transferring painfully slowly. We're talking maybe 100 or 200KBps, and it never speeds up again. If you cancel out that transfer, any subsequent transfers will do the same thing.
Here are the things we've determined through almost a week of testing this issue:
*It doesn't matter what file or what kind of file we're copying, what server we're copying it to, or what folder on the server it is being copied to
*The issue is relatively random as far as which file or transfer number will trigger it, but it is repeatable in that it inevitably will happen
*It doesn't appear to be a third-party product, hardware or software, that is causing this. It's happening on Mac Pros, G5s, a MacBook, and a MacBook Pro, none of which have very much overlap in terms of third-party things installed
*Using clean and basic installs, we've tested under controlled circumstances found that the problem does not manifest itself in Tiger or even Leopard 10.5.1
*The problem doesn't seem to be affected by the time of day at all, in that when it happens, it consistently does it whether morning, afternoon, evening, or overnight; subsequently, it does not appear to be affected by cross traffic on the network or peak network usage
*Using a quick AppleScript, we made a file transfer happen repeatedly over time; on Tiger and Leopard 10.5.1, the transfers were able to run uninterrupted for as much as 12 hours at a time without the problem manifesting itself, but with Leopard 10.5.2, the problem would occur under the same conditions within 10 to 15 minutes
*We have ruled out any faulty hardware by connecting the test machine directly to our main switch
*All the PCs on our network, in many different configurations, are performing the same types of transfers just fine
*Using Ethereal, we can see that when a transfer starts stalling out, you'll start seeing a more than usual number of duplicate ACKs on the connection
*We're not really sure what this means, but it is worth noting that doing the same types of transfers under the same conditions using curl never manifested the issue
*After the problem has manifested itself, rebooting the machine clears up the issue, but it will come back steadily
I think that's pretty much everything we've figured out, which leads us to believe that this is a problem that started happening in 10.5.2. We've eliminated as many variables as possible, so I feel very comfortable with that conclusion. The issue now, then, is finding a fix. Yes, we could just use 10.5.1, but there are so many good bug fixes in 10.5.2 that we'd like to not miss out on. We have tried several fixes on both our server side and on the Mac side, but nothing has helped.
I doubt that this is something that will get resolved, but I'm posting it here just hoping to see others having the same issue so maybe it will get noticed. Any suggestions, though, are very welcome.
Message was edited by: Josh R. Holloway

There have been some other posts suggesting that Apple might have messed up some default TCP configuration parameters in 10.5.2. It might be instructive to compare the result of:
sysctl -a | grep tcp
on otherwise similar 10.5.1 and 10.5.2 systems.

I just started using fire fox and I cant figure out how to add a new folder to my bookmarks. Can anybody explain how in detail (I'm bad with computers so I need real detail) Please and thank you. :)

I just started using fire fox and I can't figure out how to add a new folder to my bookmarks.
Can anybody explain how in detail (I'm bad with computers so I need real detail)
Please and thank you. :)

If you use extensions (Tools > Add-ons > Extensions) like Adblock Plus or NoScript or Flash Block that can block content then make sure that such extensions aren't blocking content.
Start Firefox in [[Safe Mode|Safe Mode]] to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do not click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
You can use one of these to start Firefox in Safe mode:
*On Windows, hold down the Shift key while starting Firefox with a double-click on the Firefox desktop shortcut
*On Mac, hold down the Options key while starting Firefox
*Help > Restart with Add-ons Disabled
If it works in Firefox Safe-mode then disable all extensions (Tools > Add-ons > Extensions) and then try to find which is causing it by enabling one extension at a time until the problem reappears.
Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")
See also:
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

OCIServerAttach failed -1.. Detailed OCI error val is 12170 and errmsg is '

Hi
I found this error in my trace files. Can any one help me about this
OS : Windows 2003 Server
Oracle Version : 11g R1 (11.1.0.7)
We have Physical standby
Both the Primary and Secondary servers are under the firewall
with in a single workgroup
Trace file dump
Redo shipping client performing standby login
*** 2009-10-09 08:19:34.421
OCIServerAttach failed -1
.. Detailed OCI error val is 12170 and errmsg is 'ORA-12170: TNS:Connect timeout occurred
*** 2009-10-09 08:20:16.750 1117 krsh.c
Error 12170 received logging on to the standby
Error 12170 connecting to destination LOG_ARCHIVE_DEST_2 standby host 'sprod'
Error 12170 attaching to destination LOG_ARCHIVE_DEST_2 standby host 'sprod'
ORA-12170: TNS:Connect timeout occurred
*** 2009-10-09 08:20:16.765 1117 krsh.c
PING[ARCs]: Heartbeat failed to connect to standby 'sprod'. Error is 12170.
*** 2009-10-09 08:20:16.765 27155 kcrr.c
kcrrfail: dest:2 err:12170 force:0 blast:1
*** 2009-10-09 08:25:17.062

Hi Werner
I can able to connect to the both databases from both terminals like
From Primary Terminal
Primary>conn sys/sys_password@sprod as sysdba
connected
Primary>
Primary>conn / as sysdba
connected
From Secondary Terminal
Sendory>conn sys/sys_password@prod as sysdba
connected
Secondary>conn sys/sys_password@sprod as sysdba
connected
Is there any solution for the Firewall issue
There is no problem IP Ping in either ways

System error in program CL_RSR_REQUEST and Form TEXT_ELEMENTS_GET:Variabl

Does anyone have any ideas or experiences for resolving "System error in program CL_RSR_REQUEST and Form TEXT_ELEMENTS_GET:Variabl"
Your input is appreciated

hi Arun,
sap oss note 858458 may relevant for you, take a look, may need support package.
Symptom
When you execute a query for which the user does not have authorization, a system error occurs: CL_RSR_REQUEST; Form TEXT_ELEMENTS_GET:VARIABLE.
Reason and Prerequisites
This is caused by a program error.
Solution
BW 3.0B
           Import Support Package 28 for 3.0B (BW3.0B Patch28 or SAPKW30B28) into your BW system. The Support Package is available when Note 0783170 "SAPBWNews BW3.0B Support Package 28", which describes this Support Package in more detail, is released for customers.
BW 3.10 Content
           Import Support Package 22 for 3.10 (BW3.10 Patch22 or SAPKW31022) into your BW system. The Support Package is available when Note 0783252 "SAPBWNews BW3.1 Content Support Package 22", which describes this Support Package in more detail, is released for customers.
BW 3.50
           Import Support Package 14 for 3.5 (BW3.50 Patch14 or SAPKW35014) into your BW system. The Support Package is available when Note 0836439 "SAPBWNews BW Support Package 14 NetWeaver'04 stack 14" ", which describes this Support Package in more detail, is released for customers.
In urgent cases you can implement the correction instructions.
To make information available in advance, the notes mentioned may already be available before the Support Package is released. However, in this case the short text still contains the words "preliminary version".

Some problem about SAP R/3 ~ I need some detail solutions and suggests

I need some detail solutions and suggests about below these problems:
Problem 1: SAP Management Console cannot start successfully
 Problem 1.1: Click on SAP Management Console, but yellow light continues for a long period of time.
 Problem 1.2: In DOS, startsap command cannot start SAP R/3.
 Problem 1.3: Oracle 9i database automatically shutdown by itself.
 Problem 1.4: There is very low disk storage left (say less than 50MB) in the hard disk where Oracle 9i database is installed in the server.
Problem 2: Problems in User Maintenance and Security of the SAP R/3 System
 Problem 2.1: Super user account password was lost (e.g. SAP* password was lost)
 Problem 2.2: Super users DDIC and SAP* were dropped in table usr02 in Oracle.
 Problem 2.3: Some users have been locked or deleted by an ABAP programmer who has been granted with almost superuser profiles. For example, an ABAP programmer has been granted a profile of SAP_ALL and SAP_NEW but the system administrator would like to restrict all programmers form using SU01, SU02, SM01, so that no programmers can maintain other user's accounts.
Problem 3: Problems in the configuration of client copy
 Problem 3.1: A copied client from the Client 000 cannot be customized.
 Problem 3.2: No sample data in IDES after a successful client copy.
 Problem 3.3: Logging on without being authorized. A new client is created and client copied and transported successfully. However, anyone can log into the system using user SAP* with the default password PASS.
Problem 4: Problems in the installation of SAP R/3 Server
 Problem 4.1: Computer Name of the SAP R/3 server has been changed after the full installation of Oracle 9i and SAP R/3.
 Problem 4.2: A network card of a server was faulty and it was replaced by a new network card but the SAP R/3 license was expired.
 Problem 4.3: You would like to reinstall SAP R/3 on a server which has previously installed with SAP R/3 but the same error message appears during the re-installation.
Problem 5: Problems in the backup and recovery of Oracle 9i Database
 Problem 5.1: A redo log file was lost and the database could not be started.
 Problem 5.2: A group of data files were accidentally deleted and the database could not be started.
 Problem 5.3: Both the online redo log files and archived redo log files have been damaged.
Problem 6: General problems regarding the general operations and the connection to the SAP R/3 System
 Problem 6.1: After a reboot of the Windows 2003 Server, SAP service is not automatically started.
 Problem 6.2: Some users complained that the performance of SAP R/3 is really very slow.
 Problem 6.3: A user complained that his/her password was correct but he/she could not lock on the client because it was locked.

Problem 2
2.1 If user account of the sap* is lost u can retrive by loging into os level as sidadm type this command
DELETE SAP<sid>.USR02 where BNAME='SAP*' AND MANDT=100
This 100 is the client in which u want to delete the sap*
after that restart the server and login as sap* with the default password as pass
there is also another way of doing this if needed u can catch me at [email protected]

Windows error: iTunes crashes (uninstall and reinstall does not work)

Hello all.
I (and another user) have had a problem with iTunes crashing when trying to open it. Windows just generates the typical vague error message that explains nothing as to what the problem is. Uninstalling and reinstalling did not work, and using the "Repair" option did not work either.
This was the solution. Hope it works for you. Cheers.
C ;o)
Here are the steps, some might be redundant, but still follow them to try and get iTunes to work.
1. *Extremely important* Close the QuickTime launcher in the tray on the right side of your Windows TaskBar (right-click on the blue QuickTime "Q" logo next to where you have the time and date and select "exit".) The QuickTime logo should disappear from the tray.
2. Go to where your iTunes library folder is, copy it and put it elsewhere on yoour hard-drive. This is where you asked your iTunes to point to and keeps the full repository of the files sync'ed to your iPod. If you don't do this, you will have to re-create the full library of all the music and files you have put into iTunes.
3. Unistall iTunes and reboot your PC.
4. Go to c:\Program Files\Quicktime and delete this whole folder.
5. Go to c:\Windows\System 32 and: delete the Quicktime FOLDER there; then (ii) scroll down and delete all other QuickTime related files (there should be 5-10 of them, I didn't count, some will have a name like QuickTMvr whatever).
6. Empty Recycle Bin.
7. Reboot your PC.
8. Go back to Apple Website and download: iTunes, and (ii) QuickTime installation only (without iTunes).
9. Install QuickTime FIRST (use newly downloaded version)! Check it works OK by opening it.
10. Close QuickTime lanucher from tray, as explained above in step 1.
11. Install iTunes (use the newly downloaded version).
12. Open iTunes. If it opens fine (clap your hands and say "hurray", and actually I said out loud to my PC, "Please work" and it did - I don't know if this step helped at all. ;o) ), then close iTunes FIRST BEFORE DOING THE NEXT STEP. Go to where the new iTunes (and library) folder is, rename the new iTunes folder (as you might notice when/if you open iTunes, that it is all blank), and copy the old iTunes folder (from step 2) to the same location. Re-open iTunes. It should be the way it opened the last time.

Btw.
Don't forget that, from my experience, most iTunes errors comes from malfunctioning instances of QuickTime.

Field Selection error for movement type and G/L account

I am currently experiencing a field selection error between movement type 601 and G/L account 7140000. The problem field is 'Segment'. This field is set to required for the G/L account, but it is hidden for the movement type 601. This inconsistency causes an error when posting the goods movement. According to business requirement the field must be required for the G/L account, therefore we must make this field optional for the movement type.
However, in configuration the field segment does not appear for the movement type 601. Therefore it can not be changed to optional.
Does anyone know a workaround other than making this field optional for the G/L account because the business requirement is to have this field as required?????
Many Thanks

Hi,
On the Error message detail, system will guide you to the Configuration details for Field settings for Movement type & Account, please get in touch with your FI consultant, to make the Field selection for the account similr to that of your movement type, this is a very common issue.
Regards
Chandra Shekhar

Error #3115: SQL Error.', details:'no such table

Hi,
I'm creating my Adobe Air App using Flash CS5 Professional and facing exactly the following error.
SQLError: 'Error #3115: SQL Error.', details:'no such table: 'categories'', operation:'execute', detailID:'2013'
My SQLite Db has been created using Firefox extension - SQLite Manager. The db file is placed into the same folder as the .fla and .swf files. The db has three tables namely: categories, period and activity. I don't understand why I'm getting this error. I have even tried copy pasting other source code from AS 3.0 reference guide but same error every time.
The code below is a modified version of example code in AS 3.0 reference documentation. Can you suggest how the above error can be fixed?
/you can also reply to me directly at [email protected]
/regards
import flash.data.SQLConnection;
import flash.data.SQLResult;
import flash.data.SQLStatement;
import flash.display.Sprite;
import flash.events.SQLErrorEvent;
import flash.events.SQLEvent;
import flash.filesystem.File;
var conn:SQLConnection;
var insertCategory:SQLStatement;
var dbFile:File;
databaseConnect();
function databaseConnect():void
// define where to find the database file
var appStorage:File = File.applicationStorageDirectory;
dbFile = appStorage.resolvePath("MyBudgetCalc.db");
// open the database connection
conn = new SQLConnection();
conn.addEventListener(SQLErrorEvent.ERROR, errorHandler);
conn.addEventListener(SQLEvent.OPEN, openHandler);
trace("dbFile.exists:"+ dbFile.exists);
conn.openAsync(dbFile);
// Called when the database is connected
function openHandler(event:SQLEvent):void
conn.removeEventListener(SQLEvent.OPEN, openHandler);
// start a transaction
//Object(this).inputfield.text = "openHandler called.. ";
conn.addEventListener(SQLEvent.BEGIN, beginHandler);
conn.begin();
trace("exiting openHandler..");
// Called when the transaction begins
function beginHandler(event:SQLEvent):void
conn.removeEventListener(SQLEvent.BEGIN, beginHandler);
//trace("beginHandler - SQLEvent message: "+SQLEvent.message);
Object(this).inputfield.text = "beginHandler called.. ";
insertCategory = new SQLStatement();
insertCategory.sqlConnection = conn;
insertCategory.text = "INSERT INTO categories(id, name) VALUES (', Auto')";
insertCategory.execute();
insertCategory.addEventListener(SQLEvent.RESULT, insertCategoryHandler);
insertCategory.addEventListener(SQLErrorEvent.ERROR, errorHandler);
trace("exiting beginHandler..");
// Called after the phone number record is inserted
function insertCategoryHandler(event:SQLEvent):void
insertCategory.removeEventListener(SQLEvent.RESULT, insertCategoryHandler);
insertCategory.removeEventListener(SQLErrorEvent.ERROR, errorHandler);
// No errors so far, so commit the transaction
conn.addEventListener(SQLEvent.COMMIT, commitHandler);
conn.commit();
trace("exiting insertCategoryHandler after conn.commit()..");
// Called after the transaction is committed
function commitHandler(event:SQLEvent):void
conn.removeEventListener(SQLEvent.COMMIT, commitHandler);
trace("exiting commitHandler(): Transaction complete..");
// Called whenever an error occurs
function errorHandler(event:SQLErrorEvent):void
trace("entering errorHandler()..");
// If a transaction is happening, roll it back
if (conn.inTransaction)
conn.addEventListener(SQLEvent.ROLLBACK, rollbackHandler);
conn.rollback();
trace(event.error.message);
trace(event.error.details);
trace("exiting errorHandler()..");
// Called when the transaction is rolled back
function rollbackHandler(event:SQLEvent):void
conn.removeEventListener(SQLEvent.ROLLBACK, rollbackHandler);

Can you try creating the table using the AIR ActionScript APIs? It is possible the SQLLite Manager program that you are using is creating a database that isn't compatible with AIR.

Error: Show Details cannot be executed when multiple items are selected in a report filter field or in a slicer

I have connected TABULAR Model to Excel, and in the pivot the filter is on multiple dimensions. When doing the drillthrough action it gives error - Error: Show Details cannot be executed when multiple items are selected in a report filter field or in a slicer
Is there any workaround to this error? so that drillthrough can be done even with multiple selection.

Hi Vikas,
The reason behind the error message requires the knowledge on what happens at the backend. When you perform a drill-through action, a query is sent to Analysis Services. This query is expressed in a query language called Multi-Dimensional Expression (MDX).
Since the MDX language doesnot support drill-through command against a set (collection of tuples) an error is persisted.
For now, there is no workaround as it is a limitation of the underlying language that is generating the query.
When multiple items are selected you lose the ability to drill-down on individual metrics. To resolve you must either:
1. Select a single Item.
2. Select all items.
Hope this helps!
Please mark as Answer if this helps! Thanks, Rajasekhar.

Web Analysis Error -- Error while executing query and retrieving data

Regarding Web Analysis:
We have a number of reports that we created. yesterday they were all working fine. today we try to open them and most are generating an error.
The error is:
Error while executing query and retrieving data.; nested exception is:
com.hyperion.ap.APException: [1033] Native:
1013033[Thu Oct 22 09:08:17
2009]server name/application name/database name/user name/Error91013033)
ReportWriter exit abnormally
Does anyone have any insight into what is going on?
My version information is:
Hyperion System 9 BI+ Analytic Administration Services 9.3.0.1.1 Build 2
Web Analysis 9.3.0.0.0.286
Thanks in advance for your help.
DaveW

Hi,
And also click on check option by opening the query in Query designer,as Mr . Arun suggested.
And if you get any error in checking, see the long message(detail).
With rgds,
Anil Kumar Sharma .P

Firefox will not open, getting an error message about max and min do not match....

error message detail:
XULRunner
Platform version'1.9.2' is not compatible with
min version>=1.9.2.10
max version<=1.9.2.10
this occurs after clicking the normal firefox open icon from my desktop

Do a clean reinstall and download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer. 
Don't remove personal data when uninstalling.
It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
You can skip the step to create a new profile, that is not necessary for this issue.
See http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall
Your bookmarks and other profile data are stored elsewhere (not in the Firefox program folder) and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.

!!System error in program SAPLRS_EXCEPTION and form RS_EXCEPTION_TO_MESSAGE

Hi Gurus,
Mater data text loading from a DSO to a InfoObject has failed in the process Chain at DTP step while trying to extract Data packet 2 from the DSO.
In the log i am getting following error message:
"System error in program SAPLRS_EXCEPTION and form RS_EXCEPTION_TO_MESSAGE (see long text)
Message no. BRAIN299".
Please help urgent.
FYI.....
we have recently done upgrade from BI/ABAP SP11 to SP15 and the latest Java SP || 14 (both included in SPS 14).
Points will surely be awarded.
Thanks,
Anurag

Hello Anurag,
Could you solve this problem? If so, please share the solution with me. I'm getting the same error while loading data using DTPs.
Regards,
Neha

Fiori Error while creating catalog and Group in Fiori Launchpad

Hi ,
We are getting following error while creating Catalog and Groups in Fiori Launchapd:
Error (500, Internal Server Error) in OData response for GET "/sap/opu/odata/UI2/TRANSPORT/CustomizingRequests?$filter=isDefaultRequest%20eq%20true": HTTP request failed
Details: Model 'ZTRANSPORT_MODEL_0001_BE' contains errors. Contact Adminstrator
Regards,
Trilochan
Message was edited by: Michael Appleby

Hi Trilochan,
Have you assigned transport request? Select the config icon at right top.
Creating Transport Requests for User Changes - User Interface Add-On for SAP NetWeaver - SAP Library
Also look at SAP Fiori - UI Add-on SP09 update troubleshooting
Regards, Masa
SAP Customer Experience Group - CEG

Error message:render error while running sales and reports

r message:render error while running sales and reports.
how do you fix it?

Hello,
Thanks for your post.
I can't find any useful information based on the error message. Could you please elaborate your scenario with more detail? In addition, please help to collect detail log information regarding this issue.
If this issue occured while view a SSRS report, please take a look at the following artice:
How to diagnose issues when running reports in the report server?
http://blogs.msdn.com/b/lukaszp/archive/2007/01/31/how-to-diagnose-issues-when-running-reports-in-the-report-server.aspx
Regards,
Elvis Long
TechNet Community Support

URGENT HORA-03111 error - a detailed explaination and workaround would help

Similar Messages

Maybe you are looking for