URGENT! How do I create a vertical scroll button in Flash CS6 for online banners?

Hi, I am creating Flash online banners and the disclaimer needs to open as a vertical scroll banner once the mouse touches the 'x close' button where the words 'Disclaimer' is stated.
How do I create a vertical scroll button including text?
I am using Flash CS6.

Hi Babaa,
sry for the lateness of my reply.
I would simply make a button that when clicked, displays a layer containing your disclaimer text. The discliamer text would be inside a Movie Clip (MC) for ease of controlling.
the MC then contains a text field which has a scrollable field. as the user scrolls through you can then display a "close" button to close out the disclaimer MC.
If you still need the work done feel free to email or PM me here and we can discuss the job further.
Regards
Russ

Similar Messages

HELP! How do I create a vertical scroll button for online banners?

Hi, I am creating Flash online banners and the disclaimer needs to open as a vertical scroll banner once the mouse touches the 'x close' button where the words 'Disclaimer' is stated.
How do I create a vertical scroll button including text?
I am using Flash CS6.

Hi Babaa,
sry for the lateness of my reply.
I would simply make a button that when clicked, displays a layer containing your disclaimer text. The discliamer text would be inside a Movie Clip (MC) for ease of controlling.
the MC then contains a text field which has a scrollable field. as the user scrolls through you can then display a "close" button to close out the disclaimer MC.
If you still need the work done feel free to email or PM me here and we can discuss the job further.
Regards
Russ

How do I create a Table of Contents in InDesign CS6 for print that easily converts to epub?

How do I create a Table of Contents in InDesign CS6 for a print book that easily converts to epub?
Can anyone point me to a link for a step-by-step (not a video) on setting up all the elements of a print book properly (pages, table of contents and index) so they will convert and reflow perfectly from print to epub in InDesign CS6. This is not about building an ebook from ground up, but taking 50 backlisted print books (converted from old versions of Quark to InDesign) that now need to be converted to epub formats.
OR could someone point me to the link in the Adobe InDesign CS6 support that explains how to create a Table of Contents for a print book (5.5" x 8.5", 288 pages), one that will convert when the file is converted to ePub (for MAC OSX)?
Just downloaded the 706 page inDesign CS6 reference manual from Adobe <http://helpx.adobe.com/pdf/indesign_reference.pdf> but there's not even a search feature on the pdf file.
Up until this week, we have only done print books, creating the TOC the old fashioned way, as a fixed page, comprised of two columns: page numbers and chapters/subject. The files I have created are taken by our printer and printed beautifully.
However, when I convert the same book to epub in CS6, the character and paragraph styles converted beautifully - but everything else is all over the place! The table of contents is on different pages, the columns split apart. That goes for the page contents as well - everything is all over the place. when it's converted to a pdf -- total perfection. Never any problems converting with perfection to pdf format and reading those on the various readers.
(Thank you so much in advance for any help).

<http://helpx.adobe.com/pdf/indesign_reference.pdf> Adobe Digital Reader does have a search feature for reading pdfs. Found the TOC instructions on page 176 of 706 pages.

How can I create a vertical scroll for text in a 'div' in CSS Dreamweaver?

Hi there,
I need to flow a lot of text into a CSS div. However, I don't want a big long page as it will look ugly and be inconsistent with the other pages in the site.
I need to be able to put in a vertical scroll directly in the div containing the text (not on the whole page) so the user can scroll the text down without moving down the whole page.
Is there a way for me to do this?
I'm a beginner to CSS so a step by step for dummies approach would be most helpful.
Thanks in advance for any help!

use the overflow:scroll property:
http://www.w3schools.com/Css/pr_pos_overflow.asp

How do I create a vertical gradient in a table, not with an object?

How do I create a vertical gradient effect for alternating rows in a table?
I'm trying to get my table cells to alternate and look like this:
Thanks,
freecondomap

Hi, BTJT:
We are starting work on a large catalog project where we will need to change the gradient fill to -90 on every other row in the table - excluding the header, footer and first row of each table.
How would you adjust the script you mentioned above to do this? and would the script work in Indesign CS5.5 versus Indesign CS6
It does get a bit more complicated. Not super-complicated, but not as simple.
The above idiom only works for all the rows in a table. If you want to do any specific subset, then you need to use a loop.
But is it necessary that you change the gradient angle on every other row? Isn't it sufficient to set the gradient angle on all rows, and then apply the alternating gradient on alternate rows using the the alternating fills feature, as suggested by Jeffrey?
I guess you also want to apply to...all the tables in your document? That would then be:
app.activeDocument.stories.everyItem().tables.everyItem().cells.everyItem().gradientFillAngle=-90;
Unless you need to be more selective? But I don't think you do?

How can I widen the vertical scroll bar width in Firefox and Thunderbird?

How can I widen the vertical scroll bar width in Firefox and Thunderbird?

Hello,
Try disabling graphics hardware acceleration. Since this feature was added to Firefox, it has gradually improved, but there still are a few glitches.
You might need to restart Firefox in order for this to take effect, so save all work first (e.g., mail you are composing, online documents you're editing, etc.).
Then perform these steps:
*Click the orange Firefox button at the top left, then select the "Options" button, or, if there is no Firefox button at the top, go to Tools > Options.
*In the Firefox options window click the ''Advanced'' tab, then select "General".
*In the settings list, you should find the ''Use hardware acceleration when available'' checkbox. Uncheck this checkbox.
*Now, restart Firefox and see if the problems persist.
Additionally, please check for updates for your graphics driver by following the steps mentioned in the following Knowledge base articles:
* [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]
* [[Upgrade your graphics drivers to use hardware acceleration and WebGL]]
Did this fix your problems? Please report back to us!
Thank you.

How can I create a custom sized video in PP cs6?

How can I create a custom sized video in PP cs6? I have read references to the "desktop" setting but cannot find it. I am trying to find the right settings for a 1080 px x 486 px video (which I need to qualify for hi res on Vimeo). I need to output a 450 x 1000 px video for
my website. Ideally, I'd like the sequence settings as well as the output settings. I am using still shots- no actual video.

What are the exact properties of the still images, particularly the pixel dimensions and pixel aspect ratio (PAR).* The letterboxing (black bars top & bottom) is most likely a result of a mismatch in these settings. If this is the case, then the easiest fix is to make sure not only the dimensions but the PAR match.
Say for instance your source images are 1000x1000 with a PAR of 1.0 (square pixels) and your sequence is set also set to 1000x1000 but with the PAR set to D1/DV NTSC (0.9091), the result would be letterboxing as seen here:
*if you're not sure about the PAR of your source images, right click on one of them in the Project panel and select Properties.

How can i create the blue "I"-Button for the Documentation in a view

How can i create the blue "I"-Button for the documentation in a view?
I want to prepare the button with user specified Information...
and where must be create the documentation?
thanks
Edited by: DDC-TD on Apr 24, 2008 10:22 PM

you have not mentioned where do u want the " I " information button ,
1. If u want for a report , u can get the information button on selection-screen only .
if u goto se38 on the mail screen u will find a radio button for documentaion ,
when u select it and click 'create' or 'change' , an editor will open and u can document anything there ....
2. Or specify where u want info button .
thanks ,
reward points if usefull.

How to get rid of vertical scroll bar in ABAP webdynpro table

Hello,
I have created a dynamic WD table using cl_wd_dynamic_tool=>create_table_from_node and then I restricted the number of lines to 1 by setting the 'Set_Row_Count' and 'Set_Visible_Row_Count' = 1. But still when I run the application I see a vertical scroll bar which looks very awkward for only 1 line. How do I get rid of this vertical scroll bar ?
Thanks and Regards,
Sandhya

Hi,
Is your table under any transparent container. have you set any scroll mode for this.
One more thing, have you used SER SCROLLABLE COL COUNT property.Also is this property set firstVisibleScrollableCol.
Regards,
Lekha.
Edited by: Lekha on Oct 28, 2009 11:18 AM

How do I create a Vertical Line?

Hello Forum,
I created a vertical line between the navigation and main content. I made the right side of the “side panel” visible to create the line.
It works in IE, but if viewed in Firefox, there is a gap at the end of some of the pages. Is there a better way to place a vertical line there or is there a fix for Firefox?
Here is a link to the site: http://siennastaffing.com/coastpi/services.html
Thanks,
Andrea

Divs don't behave the same as table columns. If you want to create the illusion of equal height columns with CSS, you will need to use a background image equal in width to your #container division and repeat-y.
EXAMPLE faux column page:
http://alt-web.com/TEMPLATES/2-column-fixed-width-template.shtml
Background Image used:
http://alt-web.com/Images/grn-bg.jpg
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
www.alt-web.com/
www.twitter.com/altweb
www.alt-web.blogspot.com

RH7 - Viewing WebHelp in IE9 creates two vertical scroll bars

An extra frameset appears to be in the main htm page (attached) that is generated by RoboHelp. Here’s the frameset:
<frameset cols="100%,*" frameborder=no border=0>
<frame src="whnjs.htm">
<frame src="whskin_blank.htm" noresize>
</frameset>
When viewing the help in a Telerik RadHtmlPlaceholder control in Internet Explorer 9, this frameset causes our help content to appear twice. The content is stacked on top of each other, and a vertical scroll bar is added.
Manually removing this frameset resolves the issue.
Has anyone else seen this issue, and if so, are there any RH options for resolving it?

While I was using RoboHelp 7, I worked around the frameset problem by deleting the following code from the main pag in my help system, as suggested in the forum:
<frameset cols="100%,*" frameborder=no border=0>
<frame src="whnjs.htm">
<frame src="whskin_blank.htm" noresize>
</frameset>
When I did so after generating help in RoboHelp 7, I found that the extra frameset disappeared from IE9. Later I upgraded to RoboHelp 9 for an automated solution to the extra frameset in IE9. But I find that the problem persists. On WebHelp pages with more than a single screenful of text, the double frameset appears, and the content for the page one is viewing is stacked on top of the Welcome page, much as described by TechComm2 at the beginning of this thread. In IE9, with content generated in RoboHelp 9, an extra frameset appears whether I delete the abovementioned code or leave it in.
My project is used as contextual help. Our developers have placed extra security on the project so that a user cannot view the help without first logging in to the application it describes. Because of this, I am asking our developers to help me look for a solution to extra framesets. But I did want to come back to this forum with an update and ask for additional comments from you-all as well.
Thank you.
Tom

Bottom right corner resize controls trump vertical scroll button if set to appear in the bottom corner

My bottom right corner square of the Firefox window normally sits below the bottom of the vertical scroll bar and right of the horizontal scroll bar if one exists. The square is used to click and drag to resize the window's right and bottom boundaries.
At issue is when a web site places its vertical scroll down-arrow button in the bottom right corner. I cannot access the down-arrow button with my mouse to cause the page to scroll down a few lines at a time because when I point the mouse there, I get the resize controls instead. Even though the down-arrow button is plainly visible on the screen, the resize controls take charge and I cannot use the scroll control.
Two example web sites display their down-arrow control at the very bottom of the window; TIME.com and GMAIL.com. I have also viewed two PDF documents in the browser, and they too, have a vertical scroll bar all the way to the bottom, and I cannot use that down-arrow button because instead I get the northwest-southeast click-to-resize cursor instead of the mouse pointer when I attempt to use that button for scrolling.
Someone on the Google Help forum was not able to replicate that issue, showing me screenshots of his lower right corner mouse behavior. He does not have the resize control covering access to the scroll bar.
I am using the latest Firefox, I have reset Firefox, thus dumping all of my add-ons and custom settings, and have only put back AdBlock Plus and Cookie Monster. And Troubleshooter, when I asked a similar question.
I am running Windows XP, on its last days of support. This computer is not capable of running anything newer, unless I run with Linux.
Going to TIME.com, its vertical scroll is in the bottom corner and I get the resize control arrows instead of the mouse pointer when I point to the down-button. If I disable page styles in the View menu, I get a useful output that sets the end of the vertical scroll above the bottom corner. So somebody's idea of styling the page (CSS) creates this issue for me.
Going to Gmail, turning off the styles gives me a useless output of nonsense, so I must use page styling enabled.
Can someone please give me some guidance? This forum page has vertical and horizontal scroll above and left of the bottom corner square. I have access to all the parts of both scroll bars, as is the case on most well-designed pages.
My window-resize controls are in charge always of the bottom corner square even if the vertical scroll is supposed to be there.
See also my first wording of this question: https://support.mozilla.org/en-US/questions/993519

Those layout.css prefs are about enabling some CSS feature, in this case vertical writing, so have nothing to do with scroll bars.
*Bug 772321 - implement CSS parsing of writing-mode property
*resource://gre/greprefs.js
<pre><nowiki>// Is support for CSS vertical text enabled?
pref("layout.css.vertical-text.enabled", false); </nowiki></pre>
Can you attach a screenshot?
*http://en.wikipedia.org/wiki/Screenshot
*https://support.mozilla.org/kb/how-do-i-create-screenshot-my-problem
Use a compressed image type like PNG or JPG to save the screenshot.

How do I create image pushing slide show in Flash?

Hi. I am wondering if anybody can tell me how to create a picture PUSH. I have three images that I wish to work with. By pushing I mean having an image come in from the left (or right) and place itself on top of the other (or pushing the other out of view). Like a slide show of three images scrolling along but one stops for a brief period before the other image comes into view.
Any help would be appreciated. Thanks!!!

As Pat mentioned, this question might be best suited for the Flash Professional forum, I just happen to have the link handy
Thanks,
Chris

How do I create an Itunes playlist on an ipad 2 for a shared library on my home network

Hi, please help? How do I create a playlist on tunes on my i pad2 with a shared i tunes library on my home network?

no need to create a secondary library - too troublesome, IMHO. you can spread your library over as many drives you can connect to your Mac (wired or wirelessly):
iTunes > preferences > advanced.
point iTunes media folder location to the external
on the same tab, ensure the copy files ... when adding option is checkmarked
okay out of preferences
highlight the content to be moved in iTunes and right-click
select consolidate files from the pop-up menu
wait for the process to finish
when done, you may delete the original files from your boot drive.
alternatively, you could move the whole shabang to the external HD:
copy the entire iTunes folder (not just the iTunes music or media folder) from <MacintoshHD>/users/<yourname>/music to the external, launch iTunes while holding the option(⌥) key, click on choose library when prompted, and select the iTunes folder you copied to the external.
when done, be sure to point iTunes media folder location to the external so that new additions to your library will be put there. also, you need to make sure the external is mounted on your desktop before you fire up iTunes.

How would you create a read/display only applicaiton montior role for SRM

Hello,
I was hoping to get some insight on how to create a display/read only SRM Application monitor role. This role would be used by our Service Desk to perform basic trouble shooting before escalating. Currently in our system it is tied into a tab named SAP Administration and has the capability of doing more than read. How do you create a read version of this to only display the application monitoring in read mode? We currently have an SRP role that has the followiing auths below. Would a EPP portal role need to be created and if so how> Thank you for any assistance.
   Manually   BBP Component                                                BBP
          Manually   SRM: General Access Authorizations in EBP                    BBP_FUNCT
           Manually   SRM: General Access Authorizations in EBP                    T-SD59003000
             Function in SRM (for Authoriza MON_ALERTS                                                                  BBP_FUNCT
- Todd

Hello,
I was hoping to get some insight on how to create a display/read only SRM Application monitor role. This role would be used by our Service Desk to perform basic trouble shooting before escalating. Currently in our system it is tied into a tab named SAP Administration and has the capability of doing more than read. How do you create a read version of this to only display the application monitoring in read mode? We currently have an SRP role that has the followiing auths below. Would a EPP portal role need to be created and if so how> Thank you for any assistance.
   Manually   BBP Component                                                BBP
          Manually   SRM: General Access Authorizations in EBP                    BBP_FUNCT
           Manually   SRM: General Access Authorizations in EBP                    T-SD59003000
             Function in SRM (for Authoriza MON_ALERTS                                                                  BBP_FUNCT
- Todd

URGENT! How do I create a vertical scroll button in Flash CS6 for online banners?

Similar Messages

Maybe you are looking for