URGENT HOW DO I FIX THIS HARD DRIVE ERROR

Verifying volume “Macintosh HD”
Checking HFS Plus volume.
Checking Extents Overflow file.
Checking Catalog file.
Checking multi-linked files.
Checking Catalog hierarchy.
Invalid directory item count
(It should be 34 instead of 33)
Checking Extended Attributes file.
Checking volume bitmap.
Checking volume information.
The volume Macintosh HD needs to be repaired.
Error: The underlying task reported failure on exit
1 HFS volume checked
Volume needs repair

Hi migueldesign;
Yes, that should fix the problem also. As I see it the choice is which do you wish to spend, your time or money. The reformat and reinstall will take much more of your time. It will most likely solve your problem this time. On the other hand DiskWarrior will solve the problem much quicker for some of your money. If you have another problem with your drive, you can use DiskWarrior again to fix it. It is your choice.
Allan

Similar Messages

TS3694 How can I fix this type of error in iphone 4?"The iphone could not be restored. An unknown error occurred (3194) "please help me.

Hi everybody !
AT&T company is unlocked (factory)my iphone4 before 3 days ago so i want to restore to unlock iphone 4 with itunes but it is not restore.
How can I fix this type of error in iphone 4?- "The iphone could not be restored. An unknown error occurred (3194) "
please help me in nepali language(if posible) or english. thank you.

http://support.apple.com/kb/TS3694#error3194
This means that either your firewall/antivirus is blocking access to Apple's servers, or you have used your computer to jailbreak an iDevice in the past. The link above tells you how to resolve this issue.

How can I fix my hard drive?

I have this nag of a PowerBook that I can't seem to fix. Before I send old paint out to the glue factory, I'd like to try to at least try to get some use as a web & email machine for a while. Here's the problems:
1 - CD-DVD drive is shot. Can not install anything from CD-DVD drive. Don't want to invest in a replacement drive.
2 - The somewhat infamous "2007-004 security update" of this past April sort of killed this machines ability to connect to wireless networks. There are many threads on these forums on how machines running 10.3.9 had an adverse reaction to this security update. My machine never recovered.
3 - Can not use PowerBook in target disk mode. It starts up in target disk mode and shows up on my iMac's desktop BUT if I try to access that disk, everything just hangs and I am forced to yank the FW cord after watching the beachball spin for 10 minutes. Same goes for trying to use Disk Utility or DiskWarrior in target disk mode.
I am willing to do a full archive and install on it if I can just do that somehow. Can I try to run Disk Utility or DiskWarrior in some other manner? Or is time to bury Ol Paint?
PowerBook G4 Titanium Mac OS X (10.3.9) 500MHz - 20GB HD - 768MB RAM

Well, Gary, it sounds like you've got a mess there. Since you can't fix the hard drive, maybe replacing it is the answer — but only maybe. Given its problems, the Powerbook has essentially no market value as anything but parts, so the only investment in it that might make any sense is a new hard drive, which (installed in a Firewire enclosure) could be used with any other Mac even if it doesn't result in your being able to use this one again. If the present drive has a mechanical problem, that may be why FWTDM doesn't work for you now, and a new drive should take care of that problem.
On the free side, you might consider downloading and installing Security Updates 2007-005 and -006, which have resolved the problems inherent in -004 for most users. (Once bitten, twice shy, I know.)

How do i fix my hard drive ?

my hard drive accepts the cd when i enter it but while its spinning inside the computer the computer ejects the cd.. it wont let me burn any cds, or do anything with the hard drive. i tried updating the pc software and it still doesnt work, any idea on what i can do to get it to work?

Is it just Blank CDs that you have a problem with? What happens when you put in a music CD or a DVD?
I'm confused on if your computer is a iMac or a "PC" since you say you updated the "pc software". Usually, when someone says "PC" they refer to a Windows computer.
Also, this would not be an issue with your "Hard" Drive, but rather a problem with the drive used to read your CDs/DVDs, which is something completely different.

How do I fix my Hard Drive? The permissions are all messed up.

Hi,
I have been trying for a little while now to do a time machine backup to a GoFlex Home external Hard Drive that I bought from Best Buy. Time Machine fully completed the backup one time but then it started to tell me that it was unable to use that disk anymore and that it was going to start another backup to be secure. Somehow in the process of trying to figure it out and finally mount the drive I deleted the full backup from the external hard drive and now my computer is acting up. All of a sudden it was like my Hard Drive was only acting as the start-up disk version rather than my actual hard drive. I don't know what to do, but I can't lose all of my files. I have already had to restart my computer from safe mode 2 times in the last few weeks and the last time I thought it was a goner. Should I attempt to repair the permissions while rebooting in safe mode or is there anything else I can do?

Under Utilities >> Disk Utilities, you can search the drive for permission errors and then repair then (the button below search).

(Urgent) How do I fix this Problem

I am using Oracle Forms 9iDS
How can I use the following fonts:
Monotype Koufi Bold : KOUFIBD.TTF
Arabic Transparent Bold : ARTRBDO.TTF
Tahoma : TAHOMA.TTF
I need a step by step procedure
Any Suggestion will be appreciated

Contact Apple > Contacting Apple for support and service

How do I fix this Version Cue error

I recently upgraded my Vista Machine to Windows 7. Before the upgrade I deactivated and uninstalled my Adobe Creative Suite software. After the Windows 7 upgrade I reinstalled both CS2 Premium and CS4 Design Premium. It said there was a error during install that regarding Flash and that some of it's components might not work properly and to try the installion again. I did but I am not to concerned with Flash since I don't use it. My problem is that Illustrator and Photoshop don't work. I get the following error messages when I try to open a file then the program shuts down.
Illustrator.exe - Fatal application exit
The specified module could not be found. C:\Program Files (x86)\Common FIles\Adobe\Adobe Version Cue CS4\Client\4.0.1\Version Cue.DLL
Photoshop
Error
The Specified module could not be found. C:\Program Files\Common Files\Adobe\Adobe Version Cue CS4\Client\4.0.1\Version Cue.DLL
How can this be fixed?
Thanks
Lee

I found the fix from a previous post regarding this issue. It is detailed below.
Hi Gang,
I was having the same problem as you all. I tried all the dll download sites that said they had the file I needed and all I had to do was to "unzip it and install it into the system directory", and of course, none of them worked. And that was while and after I waded through all the registry scanner stuff that came up on my "VersionCue.DLL error" search.
Anyway, to make a long story short, I simply copied the same file that is in:
C:\Program Files\Common Files\Adobe\Adobe Version Cue CS4\Client\4.0.0\
to
C:\Program Files\Common Files\Adobe\Adobe Version Cue CS4\Client\4.0.1\
Actually, I copied all of the files, not including the Dictionaries directory,
VersionCue.dll
VersionCueSDK.dll
VersionCueUI.dll
ExtendScript.dll
that were not in the 4.0.1 directory.
Now, I ended up with these 5 files,
VersionCue.dll
VersionCueSDK.dll
VersionCueUI.dll
ExtendScript.dll
ScCore.dll
and 1 directory, Dictionaries.
Now all is back to normal, for me at least. I hope this can help others, as well.
Stone
DomainMasters.NET

How do I fix this SUID file error?

After upgrading to Snow Leopard, I had a bunch of problems but seem to have solved most of them by upgrading my RAM to 4GB.
But I keep getting this error when I verify permissions. I have no idea how it happened.
Warning: SUID File "System/Library/CoreServices/RemoteManagement/...ntents/MacOS/ARDAgent" has been modified and will not be repaired.
Warning: SUID File "System/Library/PrivateFrameworks/DesktopService...ions/A/Resources/Locum" has been modified and will not be repaired.
Any ideas?

Not everybody gets them.
Personally, I refuse to be inconvenienced by a software glitch over which I can exercise some control.
These particular SUID warnings can be eliminated although the fix is not for the faint hearted. The solution is documented in [this thread|http://discussions.apple.com/message.jspa?messageID=10482083&tstart=50].
Regards

How Do I Fix This Runtime Library Error?

Hello,
I just finished up my site, and this is the only thing holding me back from publishing it. Whenever I "Test" my site, I get this error: " Your content will not stream. Runtime Shared Library (RSL) preloading will require all of your content to download before the first frame will play.
To prevent this you can change the Runtime Shared Library Library Settings, in the Advanced ActionScript 3.0 Settings dialog which can be raised from the Publish Settings dialog.
The Runtime Shared Libraries being preloaded are:
textlayout_1.0.0.595.swz for TLF Text"
Does anyone know how to correct this error? If you do, could you please walk me through it step-by-step. I am still very new to "Flash Professional (CS5)" & "ActionScript (3.0)"
Above is the exact error message I receive.

given the information provided in this forum, do you really think someone could answer that question?

How can I fix this recurring network error in the Messages App?

I use the Messages app all the time at work to chat with co-workers about jobs, etc... We have it set up using our company accounts hosted by gmail. Since upgrading to Mountain Lion we have all experienced the following issue:
At the end of the day, or when I am away from my computer for meetings, or lunch, or whatever, I log out of my user account. A lot of the time I will log back in and the messages app will act as though it is fine, but it will not actually be connected. The program makes no attempt to let me know somthing is wrong unless I try to send a message and I am prompted with "Your message could not be sent. Your account “<my account name>” is not logged in." If I go into the "Buddies" window and change the status to "Available" nothing happens, and the account bar will have the lightning bolt symbol and say "Offline" If I click on the lightning bolt an error message pops up and says, "Messages lost connection to the Jabber account "<my account name>". A Network Error Occured."
The only way to solve the problem that I have found, has been to competely re-start the computer. I have tried disabling and re-enabling the account in preferances, but it still doesn't connect.

HI,
I have seen this with AIM Logins that use the SSL Server and not the original server that was non SSL
Since iChat 6 the server name has also changed as has the Login port (Although we were suggesting using the port 443).
The AIM SSL server "Falls Over" more frequently than the other server.
Also iChat/Messages reconnects automatically to the NON SSL server but not to the SSL one (It is a security risk)
You had to manually Log out by Untick "Enable this Account" then Log back in again.
I have not seen this happen in Jabber accounts but I don't use my computer the same way you do.
Jabber Servers tend to either use SSL or Not and can rarely login if you change to not using SLL.
It also seems a bit strange that Disabling the account, as you phrase it, and re-enabling does not work.
For Googletalk Logins try logging out then changing the port to 443 (Googletalk allows this port as well as 5223)
Also check the Keychain (Applications/Utilities > Keychain Access) and see if there is an issue with any Gmail or Googletalk certificate.
10:35 PM Wednesday; November 14, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images."  No, Seriously

How do I fix this run time error crash on start up?

Whe I start Elements 10, it stops and waits at the "Organize" or "Edit" choice. (normal operation.) I chose edit and it crashes with a C++ run time error.

See if this Adobe troubleshooting document helps:
http://helpx.adobe.com/x-productkb/global/troubleshoot-c-runtime-errors-products.html
Ken

How do I fix this ORA-00900 error?

I keep getting the notoriously vague ORA-00900 error for the following Region Source code.
+(start here)+
if ( (:P44_CAC_TO_SEARCH = '***All***') and (:P44_ASSET_TO_SEARCH = NULL) )
select "ID",
"NAME",
"TITLE",
"COMPANY",
"ADDRESS_LINE1",
"ADDRESS_LINE2",
"CITY",
"STATE",
"COUNTRY",
"ZIP",
"EMAIL",
"PHONE",
"CAC",
"FAX",
"CONTACT_TYPE_ID",
"NOTES",
"ASSETS_CHECKBOXES",
"CREATED_ON",
"CREATED_BY",
"UPDATED_ON",
"UPDATED_BY",
"NEIGHBORHOOD",
"WHAT_YOU_LIKE",
"WHAT_TO_IMPROVE",
"WHAT_TO_WORK_ON",
"ENTERED_BY",
"DESCRIPTION_OF_OTHER"
from "#OWNER#"."EBA_CUST_CONTACTS";
end if;
+(end here)+
Any ideas?
Steve "the n00b" in Raleigh NC

Hi
when posting code, please put {noformat}{noformat} (with the curly braces and the word code in lower case) above and below it like this...
{noformat}{noformat}
BEGIN
NULL;
END;
{noformat}{noformat}
This will preserve formatting and will display like this...BEGIN
NULL;
END;
So your query looks like this...SELECT id,
name,
title,
company,
address_line1,
address_line2,
city,
state,
country,
zip,
email,
phone,
cac,
fax,
contact_type_id,
notes,
assets_checkboxes,
created_on,
created_by,
updated_on,
updated_by,
neighborhood,
what_you_like,
what_to_improve,
what_to_work_on,
entered_by,
description_of_other
FROM "#OWNER#"."EBA_CUST_CONTACTS"
WHERE ((:p44_asset_to_search != NULL)
AND(contains_f(:p44_asset_to_search, assets_checkboxes)))
OR((:p44_cac_to_search != NULL)
AND(contains_f(:p44_cac_to_search, cac)));
What is the source of contains_f?
Cheers
Ben
Edited by: Munky on Feb 5, 2010 2:16 PM - Oh, and remove the semi-colon from the end, it isn't needed in the source here and can mess things up

When trying to stream video I am getting this error message "Firefox doesn't know how to open this address, because the protocol (st) isn't associated with any program." How do I fix this?

<blockquote>Locking duplicate thread.<br>
Please continue here: [/questions/782039]</blockquote><br>
When trying to stream video I am getting this error message "Firefox doesn't know how to open this address, because the protocol (st) isn't associated with any program." How do I fix this?

Protocol error usually indicates that the very leftmost part of the URL is not recognized.
So http://, ftp://, rtsp://, usually work.
ableton:// would need to be added by some software somewhere...
Can you get instructions from the vendor? Does these posts seem relevant:
[http://forum.ableton.com/viewtopic.php?f=32&t=112368 Ableton Forum • View topic - [dds] Bug with Fireforx browser and downloading project?]
[http://forum.ableton.com/viewtopic.php?f=32&t=109918 Ableton Forum • View topic - [gck] Problem downloading shared sets from Ableton server.].

My External Hard Drive is All of a Sudden Not Appearing in Finder. How Do I Fix This?

How do I fix this with my LaCie Rugged 500GB external hard drive? I connect to my MacBook Air, via USB 2.0. I have tried other ports and computers, but it still is not recognized by Finder. The USB ports on my computer work, because the drive is recognized in Disk Utility. However, nearly all of the options are unavailable in Disk Utility (see screenshot), and I am unsure as to what I should do.
Any help is much appreciated!
-William

You have tried selecting William's External and then choosing the Mount option in the toolbar?

Since I upgraded to 10.9.5, my macbook no longer recognizes my external hard drive. How do I fix this? External hard drive is a 1TB Toshiba formatted for mac. Worked fine until latest upgrade.

Since I upgraded to 10.9.5, my macbook no longer recognizes my external hard drive. How do I fix this? External hard drive is a 1TB Toshiba formatted for mac. Worked fine until latest upgrade.

Solved the problem by dumping my external HD onto another computer. Re-formatting and re-installing the data. Not what I wanted to do but it solved the problem.

URGENT HOW DO I FIX THIS HARD DRIVE ERROR

Similar Messages

Maybe you are looking for