Urgent! how to add Warning for Phase out product

Hi, Can anyone guide soon on how to add a warning message when an Order/Quatation in SAP CRM for phase out product is created so that any sales representive will come to know if total amount/unit defined in the order can be delivered. Reason is to avoid bigger quantity being entered compared to remaining quantity in warehouse.

Hi Piyush
You can define a status in the product master. If you are downloading the product from ECC, you can mention the reason in the material master as "Phase Out Product" and when you download this product in CRM, the status will be shown in Sales and Distribution tab against the field Status.
If the reason is added, then it will give a error message to the sales representative that the product is blocked or phased out.
Hope this will be useful
Thanks and Regards
DJ

Similar Messages

How to add warning message while using 'print' function in Adobe LiveCycle Designer

I am trying to make pdf document for my company which requires adding a warning message while anyone use 'print' function from the page...
Does anyone know how to add warning message on LiveCycle Designer
Also my supervisor mentioned something using 'nag' if that rings any bell

No you shoudl never go into the XML source unless uinstricted to do so.
You can open the script editor (under the window menu). It will appear above the drawing area but below the toolbars. You can resize it if there is not enough room. When you click on an object in the form you can choose an event to script against in the Show dropdown. In your case you will want to choose the prePrint event. A line will show up that indicates the object that is associated with the script as well as the event and other information. Add your script below this line. Once that is done you are finished and your form is ready for testing.
Paul

How to add services for object in ECC6.0

Hi everybody,
Can anybody tell me how to add "Services for Object" icon in ECC 6.0 because this icon is there in 4.6C but not coming in ECC 6.0.
Thanks in Advance

Hi Saurabh,
Thanks for your reply. I have checked the path given by you...System-> Service for object, but it is showing no service available as told by you. Cud you please tell me how to add this service because this is working fine in 4.6C but I dont know how to add these services in ECC 6.0. If any code for this which is written in 4.6C which I can refer... please tell me where to see the code for adding services (in 4.6C) b'coz its very urgent.

How to add Excise item with out chapter id

Dear all,
How to add Excise item with out chapter id?
Chapter id of purchae items will be known only after receiving Invoice/gate pass/delivery chalan from supplier/vendor
To send a purchase order we need to create that particular item in the master, but with out assigning chapter id system is not allowing to save without chapter id.
How to solve this?
I am with SAP 8.8 and PL 10
Thanks in advance
regards,
Kumar

Hi Kumar,
Refer the book of chapter ID or find out on internet you will get the chapter ID.
Still if you not able to get the chapter id then consult with excise advisory.
But you can add Excise PO until you have the excise details in Item master.
Regards,
Datta Kharat

How to add push buttons in out put screen of ALV

Hai,
How to add push buttons in out put screen of ALV (tool bar) with out using classes or methods .I want to know using normal ALV .
Thanks in advance .
kiran

Hi Kiran,
Here is the sample code.If you are using reuse_alv_grid_display, no need to write code in PBO.
Just double click the 'TEST' which is written in code.Then create a GUI Status.In Application toolbar,type the name of the button you want(say BUTTON).Then double click that name.Then enter the ICON name and function text.Activate it.This itself will work.If you want all the functionalities,then try to do as Vinod told.
TYPE-POOLS: slis.
DATA: i_qmel LIKE qmel OCCURS 0.
data v_repid type repid.
SELECT * FROM qmel INTO TABLE i_qmel.
v_repid = sy-repid.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
   I_CALLBACK_PROGRAM                = v_repid
   I_CALLBACK_PF_STATUS_SET          = 'SET_PF_STATUS'
   I_CALLBACK_USER_COMMAND           = 'USER_COMMAND'
   i_structure_name                  = 'QMEL'
TABLES
    t_outtab                          = i_qmel
EXCEPTIONS
    program_error                     = 1
    OTHERS                            = 2.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
form set_pf_status using rt_extab type slis_t_extab.
set pf-status '<b>TEST</b>'.
endform.
FORM user_command USING ucomm LIKE sy-ucomm
                         selfield TYPE slis_selfield.
data lv_ucomm type sy-ucomm.
lv_ucomm
= sy-ucomm.
CASE lv_ucomm.
    WHEN 'BUTTON'.                              "Double Click line Item
      call transaction 'MM01'.
endcase.
endform.

How to add security for Azure Cloud Service?

Hi,
We have build some API's in azure cloud service.
We want to add security for Azure Cloud Service.
How to add security for Azure Cloud Service?

Hi Santhosh,
You may add security for your API's by using:
Mutual certificate authentication
Using OAuth 2.0
Manage developer accounts
Regards,
Manu Rekhar

How to create iBase for thrid pary Products

Hi,
Can you please tell me how to create iBase for third party products like Vertex, uPerform
Thanks

Hi,
Check this link
Service Desk: Ibase for Service Messages for non-SAP systems
Hope this helps.
Feel free to revert back.
-=-Ragu

Urgent - How to add a new control instead of tabs in JTabbedPane

Hi,
Please give me an idea or a sample program for how to add a new control
in JTabbedpane instead of tabs that means overlay any Java controls or pane
in the tabpane empty place next to tabs

"Urgent" is not relevant to the question. Your question is no more important than anybody elses.
My answer in this posting show a limited solution:
http://forum.java.sun.com/thread.jspa?forumID=57&threadID=636289
Otherwise I suggest you try using a layered pane approach:
http://java.sun.com/docs/books/tutorial/uiswing/components/layeredpane.html

How to add "services for object " in ECC 6.0

Hi Saurabh,
Thanks for your reply. I have checked the path given by you...System-> Service for object, but it is showing no service available as told by you. Cud you please tell me how to add this service because this is working fine in 4.6C but I dont know how to add these services in ECC 6.0. If any code for this which is written in 4.6C which I can refer... please tell me where to see the code for adding services (in 4.6C) b'coz its very urgent.

Hi Saurabh,
Thanks for your reply. I have checked the path given by you...System-> Service for object, but it is showing no service available as told by you. Cud you please tell me how to add this service because this is working fine in 4.6C but I dont know how to add these services in ECC 6.0. If any code for this which is written in 4.6C which I can refer... please tell me where to see the code for adding services (in 4.6C) b'coz its very urgent.

Show and Share: How to add thumbnail for uploaded by URL

Hi all,
I upload video by URL in Show and Share. Can I manually add thumbnail for video? and how to?
Thank you very much.
Bintasan Mokkamakkul

As per docs, the default behavior for show and share is to assign a
thumbnail based on the length of the video:
Check out:
http://www.cisco.com/en/US/docs/video/digital_media_systems/5_x/5_3/showandshare/user/guide/edit-delete.html#wp1079137
TABLE: Please match the # for each section:
If your video is ...
1. less than 3 seconds long
2. Between 3 and 8 seconds long
3. 8 seconds or longer
It uses this frame for the thumbnail...
1. 0 seconds
2. 4 seconds
3. 8 seconds
If you have a video that is longer than 8 seconds, but the title shot only lasts for 5 seconds, the automatically generated thumbnail may not contain your video title. Or, if you recorded a message, the system may have captured an unflattering facial expression for the thumbnail. Use this procedure to correct the situation.
http://www.cisco.com/en/US/docs/video/digital_media_systems/5_x/5_3/showandshare/user/guide/edit-delete.html#wp1079137
The procedure to modify the thumbnail is listed in the link above. You
need to go to your uploaded videos and click "Edit Video" then follow
the instructions above to move the slider where you want the thumbnail
to be.
Please keep in mind that video editing is only possible for some video
formats:
Table 6-1 Video Format Editing Support
http://www.cisco.com/en/US/docs/video/digital_media_systems/5_x/5_3/showandshare/user/guide/edit-delete.html#wp1080725
I hope this helps!
Cheers!
T.

How to add support for new file type.

Using the ESDK, I would like to add support for new file type ( a new extension). this new extension will function like any other non visual code editor but will have specific syntax highlighting, code folding and explorer.
I am trying ot figure out if I need to create a new editor or use existing JDeveloper code editor and add support for new file type. Does anyone have a high level outline on how to do this using the ESDK that is specifically targeted at adding new file type support for a text based code editor?
I have looked at the Samples and keep going in multipe directions. It would be cool if there was an example that was how add syntax higlighting for new file type.
Thank you

Brian, thank you. I looked at this extension and it answered a lot of questions for me. I was going in the right direction but needed a little help and bost of confidence, this is just what I needed. I created the LanguageSupport, LanguageModel, Addin, Node and TextDocument that are specific to the new file type. I was getting hung up on how to hook this into the JDevelpoer editor. I keep thinking I have to create a custom editor but it looks like I don't have to and it looks like I can associate this file support with the editor framwork, for version 10.1.3.2, with the following in the Addin Initilize() method.
Recognizer.mapExtensionToClass(MY_EXTENSION, MyNode.class);
CodeEditor.registerNodeType(MyNode.class, MY_EXTENSION);
LanguageModule.registerModuleForFileType(new MyLanguageModule(), MY_EXTENSION);
I have done this but still not able to recognize the new file type.
At this point, I just want to be able to recognize the new file and display it's associated icon or display a messare to the message log. I put a System.out.println("test") in the Initilize() method of my addin. then I registered MyAddin in the extension.xml. JDeveloper sees this new extension and it is loaded but I have not been able to show the test message or display the new icon when I open the new file type.
extension.xml
<?xml version="1.0" encoding="windows-1252" ?>
<extension xmlns="http://jcp.org/jsr/198/extension-manifest"
           id="teisaacs.jdev.myext.MyAddin" version="1.0.0" esdk-version="1.0"
           rsbundle-class="teisaacs.jdev.myext.resources.MyResBundle">
    <name rskey="EXTENSION_NAME">My Code Editor</name>
    <owner rskey="EXTENSION_OWNER">Me</owner>
    <dependencies>
        <import version="10.1.3">oracle.jdeveloper</import>
    </dependencies>
    <hooks>
        <jdeveloper-hook>
            <addins>
                <addin>teisaacs.jdev.myext.MyEditorAddin</addin>
            </addins>
        </jdeveloper-hook>
        <feature-hook>
            <description>My Code Editor</description>
            <optional>true</optional>
        </feature-hook>
        <document-hook>
            <documents>
                <by-suffix document-class="teisaacs.jdev.myext.model.MySourceDocument">
                    <suffix>my</suffix>
                    <suffix>MY</suffix>
                </by-suffix>
            </documents>
        </document-hook>
        <editor-hook>
            <editors>
                <editor editor-class="teisaacs.jdev.myext.editor.MyEditor">
                    <name rskey="EXTENSION_NAME">My Editor</name>
                </editor>
                <mappings>
                    <mapping document-class='teisaacs.jdev.myext.model.MySourceDocument">
                        <open-with editor-class="teisaacs.jdev.myrext.editor.MyEditor"
                                   preferred="true"/>
                        <open-with editor-class="javax.ide.editor.CodeEditor"/>
                    </mapping>
                </mappings>
            </editors>
        </editor-hook>
    </hooks>
</extension>
public class MyAddin implements Addin {
    public static final String MY_EXTENSION = "my";
    public void initialize() {
        System.out.println("MyEditor Constructor");
        new MyLanguageModule();
        Recognizer.mapExtensionToClass(MY_EXTENSION, MyNode.class);
        CodeEditor.registerNodeType(MyNode.class, MY_EXTENSION);
        LanguageModule.registerModuleForFileType(new MyLanguageModule(), MY_EXTENSION);
}I have added and removed the editor hook along with many other modificaitons to the extension.xml but still not recognizing the new file extension.
Todd

PLz Help me its urgent, how to add new field in mm01 basic data screen

Hi everyone,
plz tell me how to add new field in mm01 basic data screen,i added that field in basic data screen but when i create a material the data for that field will not save in database table.
Thanks,
murali.

Hi Murali,
when created added a field on the screen by using user exit then after that you have add the field in main table where you will be getting these table in the userexit only, please make sure about this. And i am sure defenitly it will get updated in to the table.
reward if useful.
thanks
abdulsamee.

How to add columns for wad in web apllication designer

hi,
can any one tell me how to add new columns for analysis item in wad.
i found an option of adding new rows but not able to find a option of new columns in analysis item.
please suggest me.
i will assign points

Hi,
There is no functionlaity to add new columns.
For adding new combinations to the transaction data, the input ready new rows are used. Why do you need new columns?

How to add totals for each page in main window

hi
i have problem in scripts
how to add total in first page ending and carry it to second page , at the end of second page again adding total and so on until last page.
very urgent
regards
ratna

Hi,
Check these
http://help.sap.com/saphelp_40b/helpdata/en/d1/8035c3454211d189710000e8322d00/content.htm
http://membres.lycos.fr/jolyeric/SAP/Note_de_Cours_Ben/Sapscript/SAPscript_Control_Commands.doc
try to use the command 'summing' along with one text symbol .Keep the if condtion when page changes at that time u dispay the total as ur keeping the total in text symbol it can be dispayed in the next page
or this is round about way
loop at <table>.
call write_form.
endloop.
here u declare a variable 'c' and increment it by 1 in each loop. Then u chgeck if the program has started printing second page then u can print the number of records before printing the next page.
eg :
data : c type c value '0'.
loop at <table>.
c = c + 1.
call write_form.
endloop.
in form:
check when the next page is being printed, then u can print the number
of lines 'c'.
Feel free to revert back.
--Ragu

How to add OBLIGATORY for SELECT-OPTIONS

Hi experts,
I can use OBLIGATORY for PARAMETERS
PARAMETERS :s_WMno TYPE LINK-LGNUM DEFAULT 'SCA' OBLIGATORY.
I want to add OBLIGATORY for SELECT-OPTIONS. How to do this?
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME .
    SELECT-OPTIONS: s_matnr FOR mara-matnr .
SELECTION-SCREEN END OF BLOCK b1.
Many thanks.

Hi,
TABLES spfli.
SELECT-OPTIONS : carrid FOR spfli-carrid OBLIGATORY. " This makes only Low field Obligatory
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
    IF screen-name = 'CARRID-HIGH'. " To make High field also obligatory
      screen-required = 1.
      MODIFY SCREEN.
    ENDIF.
ENDLOOP.
Cheerz
Ram

Urgent! how to add Warning for Phase out product

Similar Messages

Maybe you are looking for