Urgent: How to do the Silent Installation for J2RE v1.4.1

Hi guyz,
Can anyone tell me How to perform Silent Installation of J2RE v 1.4.1.
I checked out with J2RE V 1.4.2 which supports Silent mode installation but not JRE 1.4.1
thanks in advance,
Saurabh Bhatnagar

Hi People,
Just found out a site which has information on Silent Installation of JRE 1.4.1 ... but its not a straight fwd one. You need to run the installer atleat once to create a response file which will ecord your actions and you can use it in later installs for a silent installation.
The article says about Slent installation in JRE 1.3 but I just check it ... and it works perfectly with JRE 1.4.1 also.
Here's the link
http://java.sun.com/products/plugin/1.3/docs/silent.html
Hope it might of help to some of you ......
regards,
Saurabh Bhatnagar
Sasken

Similar Messages

How to do silent installation for Adobe CS1 .

how to do silent installation for Adobe CS1

What do you mean by "check" the silent switches? Do you mean you want the documentation for enterprise deployment?
(Worth mentioning just in case: you will need a deployment license from Adobe).

How to use the second display for installation OS in my vertical lines iMac

My 17" iMac display is full of vertical lines, it is unuseable. Does anyone know how to use the second display for Mac OS X or disable the first display for installation Mac OS x ?

Go to: *System Preferences > Displays* and select the Arrangement tab, then relocate your Menu bar by dragging it to the other display.
Unfortunately there is no Hardware or Software switch to turn off the iMac's Internal Display.

How Can I Get the FULL Installer for Flash Player 11.1.102.63?

When I try the "Download now" button at http://get.adobe.com/flashplayer/, I only get a stub installer that then requires downloading the remainder of the installer. I maintain both my own PC and my wife's PC. I want to install Flash Player 11.1.102.63 twice but download it only once.
When I instead try the link for "Flash Player for other browsers" under "Windows 32-bit", I get the full installer for Flash Player 11.1.102.62, not the full installer for Flash Player 11.1.102.63.
The latest version of Adobe Reader is available via FTP at ftp.adobe.com. Why cannot the latest version of Flash Player also be available there?

at http://forums.adobe.com/thread/889580 the link for downloading "flash player 10", "for other browsers", still results in the OLD version of FP 10 being downloaded, not the newly updated version, build 10.3.183.16..
in adobe's security bulletins, it says that you can download the updated versions of "flash player 10" on the "archives" webpage but there are no direct downloads for FP 10 on the webpage, except for downloading the zipped packages, with the "debuggers".. it would be good if there were direct downloads for the updated versions of FP 10..
also, when i go to the "download center" page, http://get.adobe.com/flashplayer/?promoid=BUIGP , if i go there with "firefox 3.6", it recognizes that i am running "firefox 3.6" and offers to install "flash player 10.3", but if i go there with "internet explorer 6", it is not recognized and so i am not offered "flash player 10.3", for installing.. in this situation, i need some other way to get "flash player 10.3" for "internet explorer 6"..
adobe should make things easier for everyone by providing direct downloads for flash player..in my case, i use "flash player 10", so i need direct downloads for it.. yes, it is nice that the downloads are posted in the forum, but why not do it right and have in on some webpage, like on the "archives" webpage where adobe says that "flash player 10" can be downloaded, except that there are no links there for downloading it..

How to run a silent configuration for Forms and Reports 11g ?

Hi all,
I've run a silent installation for Oracle Forms and Reports 11g R2 in Windows 7 64 bit.
I made it using a response file called install_only.rsp. Now I want to run the configuration also in silent mode.
How can I do it ?
I know that I can use a template called configure_only.rsp. However, i don't know what is the correct syntax for the command to start configuration.
Should I use the same setup.exe installer and inform configure_only.rsp as response file ?
The command below is the appropriate command for this task:
setup.exe -silent -response configure_only.rsp
Or is there another way to be followed?
Thanks a lot.

Alright, I eventually found the answer.
Configuration must be run from directory on windows.
Command is shown below:
<FORMS_HOME>/bin/config.bat -silent -response <path-to-response-file>

PDQ - Create Silent installation for EXE install package

The first question is: Do you have the free version or paid for version of PDQ Deploy? This will make a little difference in your approach for deployment.For the .net part, just download the off line installer for the version you want to deploy. This will be in a .exe form just append the /quite /norestart options to the command line. No need to check if .net is already installed, the installer will just exit if there is nothing to do.For your application, you need to find out if there is a silent install option.For the registry you can just export the registry keys in question with regedit. then in your installer action/script just run the following command regedit.exe /s .regYou can add this all to the install sequence if you have the paid for version or in a .cmd file in the same location as the other install files in your packages...

Hi,
I got EXE file for installation
want to create it a silent installation for deplying it to 100 computers.
needs to check if Dot.Net 4.5 already install and if not install it before installing the EXE
after Installing the EXE need to Activate it using Reg file
how to create all this procces to be installed Silent mode
Thanks.
This topic first appeared in the Spiceworks Community

How to determine the mount point for directory /tmp ?

Folks,
Hello. I am installing Oracle 11gR2 RAC using 2 Virtual Machines (rac1 and rac2 whose OS are Oracle Linux 5.6) in VMPlayer and according to the tutorial
http://appsdbaworkshop.blogspot.com/2011/10/11gr2-rac-on-linux-56-using-vmware.html
I am installing Grid infrastructure. I am on step 7 of 10 (verify Grid installation enviroment) and get this error:
"Free Space: Rac2: /tmp"
Cause: Could not determine mount point for location specified.
Action: Ensure location specified is available.
Expected value: n/a
Actual value: n/a
I have checked the free space using the command:
[root@Rac2 /]# df -k /tmp
Output:
Filesystem 1k-blocks used Available Use% Mounted on
/dev/sda1 30470144 7826952 21070432 28% /
As you see above, the free space is enough, but could not determine mount point for /tmp.
Do any folk understand how to determine the mount point for directory /tmp ?
Thanks.

I have just checked "/home/oracle/.bash_profile". But in my computer, there is no "oracle" under /home directory.Is this your first time Linux and Oracle installation? I had a brief look at your referenced link. The reason why you do not find a "oracle" user is because the instructions use "ora11g" instead, which, btw, is not standard. The directories of your installation and your installation source can be somewhat different from known standards and you will have to adjust it to your system.
My best guess is that you have either missed something in the instructions or you need to ask the author of the blog what is wrong. The chance to find someone here who has experience with these custom instructions is probably unlikely.
I suggest you try to locate the cluster verification tool, which should be in the bin directory of your grid installation. Alternatively you might want to check the RAC, ASM & Clusterware Installation forum: RAC, ASM & Clusterware Installation

Need help with a Silent Installer for Photoshop Elements 10

I can't seem to get the silent installer working. I've used the Elements 9 instructions for 10 but I still get pop-ups requesting info:
http://helpx.adobe.com/photoshop-elements/kb/silent-install-volume-license-photoshop.html
I cannot find any info at all relating specifically to Elements 10. Before I go digging into the msi with ORCA (preferable to have something I can deploy in Active Directory through GPO) I tought I'd ask here

@mtarggart
Delete the blank between /UL and 1033, and it will work. :-)
@Davide M, thanks a lot for your helpful article!
mtarggart wrote:
I've tried the above command and I keep getting prompted to select an Install Language. I'm trying to install this on Windows 7 x64 Enterprise. From an elevated command prompt pointed to the directory of the Elements install files (C:\PSE 10), this is what I am typing: start /wait setup.exe /UL 1033 /V"SERIALNUMBER=xxxx-xxxx-xxxx-xxxx-xxxx".
For the ones who want to use installation from a server share,
change "Setup.exe" by using \\Servername\Share\Setup.exe
and set \\Servername\Share to your Servershare.
The last thing I've been searching for was setting the right country
and stopping PSE from asking me which country I am living in.
Seems as if there was an additional switch e.g. "Country=244" for US.

How to create the exe files for java application

How to create the exe file for java application?
got any software to do that?
Thanks

In terms of converting java applications into exe files, there are 3 schools of thought:
1) Instead of converting it to an exe, convert it to a jar file. Jar files are more portable than exe files because they can be double-clicked on any operating system. The caveat is that a Java interpreter must be installed on the target computer for the double-clicking to work.
http://developer.java.sun.com/developer/Books/javaprogramming/JAR/
2) Create an exe launcher that, when double-clicked, attempts to find a Java interpreter on the local computer and launches the Java application. The exe file is still double-clickable but whether your java application runs depends on whether a Java interpretor is installed on the target computer.
http://www.sureshotsoftware.com/exej/
http://www.objects.com.au/products/jstart/index.jsp
http://www.duckware.com/products/javatools.html
http://www.ucware.com/jexec/
http://www.rolemaker.dk/nonRoleMaker/javalauncher/
http://www.jelude.cjb.net/
http://thor.prohosting.com/~dfolly/java/index.html
3) Create an exe launcher that bundles a Java interpretor. Same as above but when the exe file is double-clicked, it searches for a Java interpreter and if one is not found, it installs one on the target computer. The caveat is that the exe file would have an overhead of 10 MB in size for the interpreter.
http://www.excelsior-usa.com/jet.html (evaluation version available)
4) Convert the Java application into a native exe file. The caveat is that if you use Swing for your GUI, it won't be converted. Also this option is still somewhat experimental.
Can't think of any free options right now.

Silent Installation for CS5.5?

I've been able to get silent installation for the DPS tools to work fine for CS6 (v27), but I haven't found a successful method for CS5.5 (v27), aside from using JAMF's Composer to perform a file-system watch.
The commands I've tried:
sudo /Adobe/DPS/r27/cs5.5fp/Install.app/Contents/MacOS/Install --mode=Silent
Starting Installer...
In Silent mode.
Installation successful.
Exiting Installer with Code: 0
sudo /Adobe/DPS/r27/cs5.5fb/Install.app/Contents/MacOS/Install --mode=Silent
Starting Installer...
In Silent mode.
Installation successful.
Exiting Installer with Code: 0
They always report that they run successfully, but don't seem to actually install anything. If I remove the silent flag, the installer will run, successfully, albeit with user interaction, which isn't desirable. Has anyone encountered a similar issue, or have a good way around it?

Although I already provided the solution privately I will post it here as well in case other users are facing the same problem.
The correct syntax for silent deployment is:
sudo ./Install --mode=silent --deploymentFile="path"
So for example:
sudo ./Install.app/Contents/MacOS/Install --mode=silent --deploymentFile=deploy/AdobeDigitalPublishing-mul.install.xml
(the assumption here is that the user is in the directory where Install.app is.
From the command line you should see "Installation successful. Exiting Installer with code: 0.

Silent Installation for OUI Product

I'm trying to do silent installation for Oracle RCU Client by
setup.exe -responseFile "C:\Kapil\Recording\RCU Installer\Disk1\stage\Response\oracle.as.repcu.rcu.rsp" -silent -nowelcome
it starts the Installation in GUI Mode & opens the welcome page
Is anything need to be changed in response file, as i have set ORACLE_HOME="C:\oracle\product\11.1.1\rcuHome_1" and ORACLE_BASE="C:\oracle\product\11.1.1\rcuHome_1"
there are 3 response files present in Stage/Response folder,
oracle.as.repcu.rcu.rsp,
oracle.as.schema.version.Custom.rsp,
oracle.as.upgrade.Complete.rsp
i don't know which one to change ? For testing purpose i have changed & set the ORACLE_HOME & ORACLE_BASE but nothing works out.
Please suggest apart from these values which i have set in response file, anything else do i need to set other values.
Also it's not prerequisite to setup RCU Client in silent mode. Please suggest if some other oracle product (OUI based) can be setup in silent mode. I'm doing for testing purpose to run the silent based installation...
Thanks in advance

Hi,
setup.exe -responseFile "C:\Kapil\Recording\RCU Installer\Disk1\stage\Response\oracle.as.repcu.rcu.rsp" -silent -nowelcome
setup.exe -silent -responseFile "C:\Kapil\Recording\RCU Installer\Disk1\stage\Response\oracle.as.repcu.rcu.rsp"
Please check this link
http://www.oracle-base.com/articles/misc/OuiSilentInstallations.php
- Pavan Kumar N

Create an Adobe 9.3 silent installation for Windows

What are the silent installation switches that I can use for 9.3 so that won't be any user interaction and that the pc won't restart or prompt me to restart? Thanks.

You can find all information in this document http://www.adobe.com/devnet/acrobat/pdfs/deploying_reader9.pdf
P.S. you can download the MSI from here ftp://ftp.adobe.com/pub/adobe/reader/win/9.x/9.3/enu/

My computer was stolen! How to deactivate the old installation?

Hey, I need to use my serial number o install the CS6 on the new computer (Mac), because the old one was stolen. How to deactivate the old installation.

Hello!Thank you for your answer, but still I can not connect with anyone who can help me. Chat is not working, I tried for the past three days. I bought this program together with educational kurs and now I need it to do my study. Could you help me please to activate Adobe Creative Suite 6 on my new computer?With best wishes,Tania.
Jeff A Wright <[email protected]> schrieb am 20:26 Dienstag, 16.Dezember 2014:
|
My computer was stolen! How to deactivate the old installation?
Jeff A Wright marked hans-g.'s reply on My computer was stolen! How to deactivate the old installation? as helpful. View the full replyMarked as helpful:Hello Tania, please have a look there: http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html >>> Deactivation or sign-out problems >>>I cannot access my previous computer >>> I quote: "... Ask Adobe Support to help you deactivate from a machine you cannot access. .... Have your serial number or Adobe ID ready, and then contact us." See Contact Customer Care >>> click through and if "open" please use the chat, I had the best experiences. I quote from Adobe's employee Preran: The chat button is activated as soon as there is an agent available to help. Hans-Günter
Following My computer was stolen! How to deactivate the old installation? in these streams: Inbox
|

HT1222 How large is the up date for Mountain Lion?

How large is the up date for mountain lion for my mac in mega bites?

Here are the system requirements:
http://www.apple.com/osx/specs/
You need 8 GB of available hard drive space (plus another 10 GB or so to have empty and available at any time for the OS to operate properly). The installer itself is just over 4 GB (all the numbers are in Gigabytes, not megabytes).
And it is considered an upgrade (you need to pay for it) rather than an update (which would be free).

How to know the dynamic values for this :AND category_id_query IN (1, :3, )

Hi Team,
R12 Instance :
Oracle Installed Base Agent User Responsibility --> Item Instances -->
Item Instance: Item Instances > View : Item Instance : xxxxx> Contracts : Item Instance : xxxxx> Service Contract: xxxxx>
In the above page there are two table regions.
Notes.
-------------------------------------Table Region---------------------------
Attachments
-------------------------------------Table Region---------------------------
--the attachments are shown using the query from the fnd_lobs and fnd_docs etc...
I want to know what are the document types are displayed in this page ?
--We developed a custom program to attach the attachments to the services contracts and the above seeded OAF page displays those ..as needed.
But after recent changes..the Attachments--> table region is not showing the attachments.
I have verified the query..and could not find any clue in that..
but i need some help if you guys can provide..
SELECT *
FROM
*(SELECT d.DOCUMENT_ID,*
d.DATATYPE_ID,
d.DATATYPE_NAME,
d.DESCRIPTION,
DECODE(d.FILE_NAME, NULL,
*(SELECT message_text*
FROM fnd_new_messages
WHERE message_name = 'FND_UNDEFINED'
AND application_id = 0
AND language_code = userenv('LANG')
*), d.FILE_NAME)FileName,*
d.MEDIA_ID,
d.CATEGORY_ID,
d.DM_NODE,
d.DM_FOLDER_PATH,
d.DM_TYPE,
d.DM_DOCUMENT_ID,
d.DM_VERSION_NUMBER,
ad.ATTACHED_DOCUMENT_ID,
ad.ENTITY_NAME,
ad.PK1_VALUE,
ad.PK2_VALUE,
ad.PK3_VALUE,
ad.PK4_VALUE,
ad.PK5_VALUE,
d.usage_type,
d.security_type,
d.security_id,
ad.category_id attachment_catgeory_id,
ad.status,
d.storage_type,
d.image_type,
d.START_DATE_ACTIVE,
d.END_DATE_ACTIVE,
d.REQUEST_ID,
d.PROGRAM_APPLICATION_ID,
d.PROGRAM_ID,
d.category_description,
d.publish_flag,
DECODE(ad.category_id, NULL, d.category_id, ad.category_id) category_id_query,
d.URL,
d.TITLE
FROM FND_DOCUMENTS_VL d,
FND_ATTACHED_DOCUMENTS ad
WHERE d.DOCUMENT_ID = ad.DOCUMENT_ID
*) QRSLT*
WHERE ((entity_name    ='OKC_K_HEADERS_V'-- :1
AND pk1_value          IN ( 600144,599046) --:2
AND category_id_query IN (1, :3, :4, :5, :6, :7) )
AND datatype_id       IN (6,2,1,5)
AND (SECURITY_TYPE     =4
OR PUBLISH_FLAG        ='Y')))
--='000180931' -- 'ADP118'
The above seeded query is the one which is used for table region to retrieve the data..
how to know the dynamic values for this : AND category_id_query IN (1, :3, :4, :5, :6, :7) )
--Sridhar

Hi Patricia,
is it working for restricted key figure and calculated key figure ??
Note Number Fisc Period Opening Days
1 1 2
2 1 3
3 1 0
because I have other restriction, so I create two restricted key figure..
RK1 with restriction : Total Number of Note,
RK2 with restriction : Total Opening Days ,
then I Created a calculated key figure, average opening days in a period
CK1 = RK2 / RK1..
in this case, I am not sure if it will work or not..
for example, during RK2 calclation, it might be this   2+3 = 5, the line with 0 will be ignored..
during RK1 calcualtion, it might be 1 + 1 + 1 = 3. ---> Not sure in this case, the line with opening days 0 will be calculated or not..
could you please confirm..

Urgent: How to do the Silent Installation for J2RE v1.4.1

Similar Messages

Maybe you are looking for