Urgent How to fulfill multiple lines input in CVI front panel?

Hi Guys,
I want to paste multiple lines text from other files to CVI front panel, but String, Text Box or List Box can't do when I tried.
Could some one tell me how I can realize it or show me an example?
Thanks in advance!

You can add this functionality by using RunPopupMenu to display your own menu when right-clicking on the control: see this discussion and the example attached to this post.
Proud to use LW/CVI from 3.1 on.
My contributions to the Developer Zone Community
If I have helped you, why not giving me a kudos?

Similar Messages

How to Update multiple line Items in Sales order Interactive form

Hi,
I have created one online interactive form for sales order. In that I incorporated dynamic table logic .i.e. we can add row and delete row using buttons. Interactive form is working fine with one line item. But if I give multiple lines in table (line item) its creating sales order with single line item. So please help me how to pass multiple lines.
Thanks & Regards,
Krishna.

Hi,
Check out this link, this deals with the problem you are facing.
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/802f0ed1-a17a-2c10-7db4-d515a5b047ed
Regards,
Runal

How to insert multiple line items in fv60 using bdc.

Hi all,
 How to insert multiple line items in fv60 using bdcs

hi
chk this
DATA : IT_BDCDATA LIKE BDCDATA OCCURS 0 WITH HEADER LINE.
DATA : IT_MESSAGES LIKE BDCMSGCOLL OCCURS 0 WITH HEADER LINE.
DATA : V_EBELP(30) , V_MENGE(30) , V_WERKS(30), V_EMATN(30) ,
V_PEINH(30).
DATA : FILE TYPE STRING, V_MSG(100) , V_IND(2) TYPE N , FLAG VALUE 'X'.
PARAMETERS: P_FILE(50) TYPE C DEFAULT 'C:\ME21_TEST'.
DATA : BEGIN OF ITAB OCCURS 0,
 IND(02),
 LIFNR_001(010),
data element: BSART
 BSART_002(004),
data element: BEDAT
data element: EKORG
 EKORG_004(004),
 EKGRP_006(003),
data element: LPEIN
 LPEIN_005(001),
data element: EMATNR
 EMATN_01_007(018),
data element: EWERK
 WERKS_01_008(004),
data element: EPEIN
 PEINH_01_009(006),
data element: EWERK
 MENGE_01_013(017),
data element: AUFEP
 EBELP_014(005),
data element: AUFEP
 END OF ITAB.
START-OF-SELECTION.
FILE = P_FILE.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
 FILENAME = FILE
 FILETYPE = 'ASC'
 HAS_FIELD_SEPARATOR = 'X'
HEADER_LENGTH = 0
READ_BY_LINE = 'X'
DAT_MODE = ' '
CODEPAGE = ' '
IGNORE_CERR = ABAP_TRUE
REPLACEMENT = '#'
CHECK_BOM = ' '
IMPORTING
FILELENGTH =
HEADER =
TABLES
 DATA_TAB = ITAB
EXCEPTIONS
 FILE_OPEN_ERROR = 1
 FILE_READ_ERROR = 2
 NO_BATCH = 3
 GUI_REFUSE_FILETRANSFER = 4
 INVALID_TYPE = 5
 NO_AUTHORITY = 6
 UNKNOWN_ERROR = 7
 BAD_DATA_FORMAT = 8
 HEADER_NOT_ALLOWED = 9
 SEPARATOR_NOT_ALLOWED = 10
 HEADER_TOO_LONG = 11
 UNKNOWN_DP_ERROR = 12
 ACCESS_DENIED = 13
 DP_OUT_OF_MEMORY = 14
 DISK_FULL = 15
 DP_TIMEOUT = 16
 OTHERS = 17
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
SORT ITAB BY IND.
START-OF-SELECTION.
LOOP AT ITAB.
REFRESH IT_MESSAGES.
V_IND = V_IND + 1.
AT NEW IND.
READ TABLE ITAB INDEX SY-TABIX.
PERFORM BDC_DYNPRO USING 'SAPMM06E' '0100'.
PERFORM BDC_FIELD USING 'EKKO-LIFNR'
 ITAB-LIFNR_001.
PERFORM BDC_FIELD USING 'RM06E-BSART'
 ITAB-BSART_002.
*perform bdc_field using 'RM06E-BEDAT'
 ITAB-BEDAT_003.
PERFORM BDC_FIELD USING 'EKKO-EKORG'
 ITAB-EKORG_004.
PERFORM BDC_FIELD USING 'RM06E-LPEIN'
 ITAB-LPEIN_005.
PERFORM BDC_FIELD USING 'EKKO-EKGRP'
 ITAB-EKGRP_006.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
 '/00'.
ENDAT.
PERFORM BDC_DYNPRO USING 'SAPMM06E' '0120'.
CONCATENATE 'EKPO-EMATN(' V_IND ')' INTO V_EMATN.
PERFORM BDC_FIELD USING V_EMATN
 ITAB-EMATN_01_007.
CONCATENATE 'EKPO-WERKS(' V_IND ')' INTO V_WERKS.
PERFORM BDC_FIELD USING V_WERKS
 ITAB-WERKS_01_008.
CONCATENATE 'EKPO-PEINH(' V_IND ')' INTO V_PEINH.
PERFORM BDC_DYNPRO USING 'SAPMM06E' '0120'.
PERFORM BDC_FIELD USING V_PEINH
 ITAB-PEINH_01_009.
*CONCATENATE 'EKPO-MENGE(' V_IND ')' INTO V_MENGE.
*perform bdc_dynpro using 'SAPMM06E' '0120'.
*perform bdc_field using V_MENGE
 ITAB-MENGE_01_013.
*CONCATENATE 'EKPO-EBELP(' V_IND ')' INTO V_EBELP.
PERFORM BDC_DYNPRO USING 'SAPMM06E' '0120'.
PERFORM BDC_FIELD USING 'RM06E-EBELP'
 ITAB-EBELP_014.PERFORM BDC_FIELD USING 'BDC_OKCODE'
 '/00'.
AT END OF IND.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
 '=BU'.
ENDAT.
CALL TRANSACTION 'ME21' USING IT_BDCDATA MODE 'A'
 UPDATE 'S'
 MESSAGES INTO IT_MESSAGES.
 LOOP AT IT_MESSAGES WHERE MSGTYP = 'E' OR MSGTYP = 'A'.
 IF FLAG = 'X'.
 CALL FUNCTION 'BDC_OPEN_GROUP'
 EXPORTING
 CLIENT = SY-MANDT
 DEST = FILLER8
 GROUP = 'GAMY_FAILURE'
 HOLDDATE = FILLER8
 KEEP = 'X'
 USER = SY-UNAME
 RECORD = FILLER1
 PROG = SY-CPROG
 IMPORTING
 QID =
 EXCEPTIONS
 CLIENT_INVALID = 1
 DESTINATION_INVALID = 2
 GROUP_INVALID = 3
 GROUP_IS_LOCKED = 4
 HOLDDATE_INVALID = 5
 INTERNAL_ERROR = 6
 QUEUE_ERROR = 7
 RUNNING = 8
 SYSTEM_LOCK_ERROR = 9
 USER_INVALID = 10
 OTHERS = 11
 IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
 ENDIF.
 CLEAR FLAG.
 ENDIF.
 CALL FUNCTION 'BDC_INSERT'
 EXPORTING
 TCODE = 'ME21'
 POST_LOCAL = NOVBLOCAL
 PRINTING = NOPRINT
 SIMUBATCH = ' '
 CTUPARAMS = ' '
 TABLES
 DYNPROTAB = IT_BDCDATA
 EXCEPTIONS
 INTERNAL_ERROR = 1
 NOT_OPEN = 2
 QUEUE_ERROR = 3
 TCODE_INVALID = 4
 PRINTING_INVALID = 5
 POSTING_INVALID = 6
 OTHERS = 7
 IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
 ENDIF.
 ENDIF.
CALL FUNCTION 'FORMAT_MESSAGE'
EXPORTING
 ID = IT_MESSAGES-MSGID
 LANG = 'EN'
 NO = IT_MESSAGES-MSGNR
 V1 = IT_MESSAGES-MSGV1
 V2 = IT_MESSAGES-MSGV2
 V3 = IT_MESSAGES-MSGV3
 V4 = IT_MESSAGES-MSGV4
IMPORTING
 MSG = V_MSG
EXCEPTIONS
 NOT_FOUND = 1
 OTHERS = 2
 WRITE : / V_MSG.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDLOOP.
 ENDLOOP.
IF FLAG NE 'X'.
CALL FUNCTION 'BDC_CLOSE_GROUP'
 EXCEPTIONS
 NOT_OPEN = 1
 QUEUE_ERROR = 2
 OTHERS = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDIF.
 Start new screen *
FORM BDC_DYNPRO USING PROGRAM DYNPRO.
CLEAR IT_BDCDATA.
IT_BDCDATA-PROGRAM = PROGRAM.
IT_BDCDATA-DYNPRO = DYNPRO.
IT_BDCDATA-DYNBEGIN = 'X'.
APPEND IT_BDCDATA.
ENDFORM.
 Insert field *
FORM BDC_FIELD USING FNAM FVAL.
 CLEAR IT_BDCDATA.
 IT_BDCDATA-FNAM = FNAM.
 IT_BDCDATA-FVAL = FVAL.
 APPEND IT_BDCDATA.

How to validate multiple lines which is exist in the form builder at the same session

Hi All,
we are working on oracle Forms personalization to trigger the message at the point of saving multiple lines rather than requiring each line to be save individually. Currently the oracle form is allowing to user to enter two distinct lines that have same resource and basis type in BOM.
Currently the Oracle form is allowing to enter the duplicate combination and not giving any error message even we enter the same combination of data.
As per the customer requirement, they don’t want to validate the data while creating the records but when they try to save the form, in that case it should validate all the records at a time then need to display the appropriate message.
Customer don’t want to customize the Oracle standard form. Here we have only option to use form personalization or through custom.pll.
Any idea on how to validate multiple lines which is exist in the form builder at the same session as before inserting the record itself need to perform the validations for all the records.
Thanks for your help in this regard.
Regards,
Thirupathi

you can write a post script which will do the necessary tasks.
I mean, once you are done with inserting records into these tables, exeute another procedure which will insert these "extra" records, based on some logic.
you may not be able use DB trigger as it may generate mutating error or if you don't write it carefully, it will go into recursive loops as you are refering to same tables.
HTH

How to select multiple lines in reports

Hi,
how to select multiple lines in a reports and process those selected lines to other activities like BDC.
Please paste sample report here. or any demo examples . (don't paste ALV report , paste only classical report)
suppose there are 10 records in output, i want to select 3 records and process other activities like bdc.
Point will awarded.

Hi ,
the o/p in ur case will be a basic list output with a check box enabled in the left .
Now say there are 10 records in the list output and i have checked 3 of them where checkboxes are enabled .
And i press a button to submit this to the BDC .
Here u need to make use of
READ LINE statement to read the records from the list output and then pass them to the BDC .
The code would be something like this
DO .
Read line index <field> where checkbox <> ' '.
ENDO.
You can have a look at the F1 help on read line . This will mkae u clear .
Hope this gives u an idea.
Regards,
Vijay.

How to read multiple lines using 'REUSE_ALV_GRID_DISPLAY'

Hi,
In ALV report the FM 'REUSE_ALV_GRID_DISPLAY' used.
EXPORTING
I_CALLBACK_PROGRAM = W_REPID
I_CALLBACK_PF_STATUS_SET = 'PF_STATUS'
I_CALLBACK_USER_COMMAND = 'USER_COMMAND'
How to read multiple lines in the following dynamic subroutine ?
I am able to read single value through p_selfld.
Nut the requirement is to change the values in more than 1 row for a fld (edit mode)
FORM USER_COMMAND USING P_UCOMM TYPE SY-UCOMM
P_SELFLD TYPE SLIS_SELFIELD.
endform
Thanks in advance

You can get the reference by a dirty assign, but this is not offcially supported...
But if you have some limitations.
FORM user_command USING fuw_ucomm LIKE sy-ucomm
 fuw_selfield TYPE slis_selfield.
FIELD-SYMBOLS: <lfs_grid> type ref to cl_gui_alv_grid,
 <lfs_row> type LVC_S_ROW.
data: li_rows type lvc_t_row.
 assign ('(SAPLSLVC_FULLSCREEN)GT_GRID-GRID') to <lfs_grid>.
 check sy-subrc is initial.
 call method <lfs_grid>->get_selected_rows
 IMPORTING
 et_index_rows = li_rows.
endform. "user_command

How do I get the Label for a Front Panel Control to appear in the Block Diagram but not on the Front Panel?

How do I get the Label for a Front Panel Control to appear in the Block Diagram but not on the Front Panel? On the Front Panel I am making a complex control that consists of a Slider and a Numerical Input box. Both Controls display the same information and either can be used for Input. When one changs, the other is made to display the same value.
But I only want the Slider to display the Label on the Front Panel, to avoid confusion. On the Block Diagram however, I want both controls to display their Labels so that I know what they are. How do I display the Label for a Control on the Block diagram, but not display its Label on the Front Panel?

No. The Label Visible property is separate for the front panel control label and the block diagram terminal label.
How did you start out with the block diagram's label not being visible? Whenever I drop a control or indicator, the label is always visible on both the FP and BD by default. Maybe there is a LabVIEW option that causes new controls/indicators not to have their labels visible by default, but I have yet to find it. I don't think an item should ever be dropped without the label visible, good LabVIEW coding practice demands that the labels for control terminals on the block diagram be visible so that you know what control or indicator a wire is going to.
That being said, I have seen a lot of VI's posted where the label for the terminal on the BD is not shown (against good programming practice.) I've gone to the BD and right clicked to show the label. Sometimes, the people have an empty label (which will turn off the visibility for both the FP and BD) and I'm forced to add some text of my own into the label so I can figure out what their code is doing. When I add some text to the label, at that time, I find both the BD and FP labels become visible.
Are you dealing with controls that have empty labels to start?
Good programming practices:
1. Always have a name for all of your controls, never use and empty label by deleting the text in the label.
2. Make the labels unique. For example, don't have two controls both called Stop. How do you know quickly know which terminal relates to which control?
3. Always show the labels on the block diagram, so you know the function of a control's terminal. If you want to hide the label on the FP, that's okay.
4. If you want a different label to appear on the FP than whatever you actually called the control, then use the caption. You can hide the label and show the caption. This is useful if you need to programmatically change what the "label" is on the front panel such if you are making an application that needs to change its user interface such as for a foreign language.

How to make non-visible Control on Front Panel Appear at Design Time?

I have some Controls on the Front Panel whose visibility is changed (turned on or off) at Run Time. The problem is that if I stop the Run time, the Visibility of the Control remains in the runtime state in Design mode. So I may not be able to see or find the Control to make changes in Deisgn mode.
How can I make all Controls on the Front Panel visible, or find and make visible a Control on the Front Panel whose Visibility has been made False?
THANKS.
Solved!
Go to Solution.

This is documented in the LabVIEW Help.
Displaying Hidden Front Panel Objects
Complete the following steps to display a hidden front panel control or indicator. You also can hide front panel controls and indicators.
Find the block diagram terminal for the object. If you have several terminals with the same data type, right-click the terminals and select Visible Items»Label from the shortcut menu. Find the object with the label that matches the hidden front panel object.
Right-click the terminal and select Show Control from the shortcut menu if the object is a control or Show Indicator if the object is an indicator.
You also can use the Visible property to display controls and indicators programmatically.
You also can display all hidden front panel controls and indicators.
Path: Fundamentals -> Building the Front Panel -> How-To -> Configuring Front Panel Objects -> Displaying Hidden Front Panel Objects.

How to handle multiple line items in lsmw

hi all,
how can i handle multiple line items in lsmw either by using direct input method or BDC recording.
first preference is Bdc recording in lsmw . can u tell me the steps in detail.
thanks,
harini.c

Hi Harini,
Check this link.
BDC - Header with multiple line items.
Regards,
Arun

How to Create multiple line items

Hi
I have created a web dynpro application that accesses BAPI_REQUISITION_CREATE to create a requisition. The application so far creates a requisition with only one line item.
How do I capture details about multiple line items from the user before submitting the form to create the requisition.
Thanks in advance for your help.
Sriram

Hi Sriram,
Create a form where u enter the requisition details of one line item.Suppose say if u have a button Add another Line Item on click of that fill a value node say
RequsitionDetails of cardinality 0-n and clear the form.If u want u can also show the added item in a table below by bindin the data source to RequistionDetails. Now the user can enter another line item in the form.Similarly now he can enter multiple line items.On click of Submit u submit the records in the RequistionDetails node.Add all these records to the table parameter which u r passing.
BAPI_REQUISITION_CREATE_Input input = new BAPI_REQUISITION_CREATE_Input();
wdContext.node<<>>.bind(input);
for(int index=0;index<wdContex.nodeRequsitionDetails().size();index++)
zTestStruc test = new zTestStruc();
test.setattr1(wdContex.nodeRequsitionDetails().getRequsitionElementAt(index).getattr1());
input.add<<>>(test);
Hope this solves.
Regards,
Sowjanya.

LSMW - ME21 How to map multiple line items

Hi all,
I am using LSMW tool with batch input recording technique to create POs via ME21. I have defined source structures as HEAD with POSI as its subordianted structure. This settings worked perfectly for one single item line. However, it created a new transaction for each line item in the file. I did some searches in this forum and I noticed that someone suggested to dynamically set the line positon at the processing points. I tried a few times and could not get it work. Anyone knows how to map multiple items in LSMW, please help.
Here is part of my recording:
EKPO-EMATN(01)                 000995NM
EKPO-MENGE(01)                                 1      RM06E-EEIND(01)                2006.04.27             EKPO-NETPR(01)                             10         EKPO-WERKS(01)                 0001                   EKPO-LGORT(01)                 0001
My input file looks like this:
H 77777400 NB2006.05.140001001T
L000995NM00000000052006.05.15         1000010001CAON
L000998NM00000000052006.05.15         1000010001CAON
H 77777400 NB2006.05.140001001T
L000995NM00000000052006.05.15         1000010001CAON
Thanks!

Hi
If you have used a b.i. recording, all abap code is inserted in std table /SAPDMC/LSGBDC.
The program to generate the B.I. session is automatically created when you run "Create Batch Input Session" step.
What means the numbers of items you can insert depend on the totals of items you have used while creating your b.i. recording:
If you have simulated to insert only one item, you'll be able to insert only one item in your project.
So you should simulate to insert severals items not only one, but I think it should be better you use a std method to create PO by LSMW:
- Std B.I: object 0085, method 0001 (RM06EEI0);
- BAPI   : object BUS2012, method CREATEFROMDATA1
Max

Crystal report -How to display multiple lines in line chart?

Hi,
M struggling to display multiple lines in line chart. All the values m fetching it from database into data table in below format & data type
Category(String).....year(Int).....graph_values(Int).....table_value(String)
Test.........................2006.......... -100............................(100)
Avg..........................2006..........20................................20
Median......................2006...........5................................5
Test..........................2007...........500.............................500
Avg...........................2007............90..............................90
Median.......................2007............45..............................45
M using cross tab to display data and chart to plot line. Following fields I used in Cross tab Expert & Chart expert
Cross tab expert-
Rows u2013 category
Columns u2013 year
Summarized fields u2013 Min of table_value
In Chart Expert u2013
On Change of - Year
Show values - graph values
In cross tab m able to see the data properly but not in graph.I have three categories. Hence it should plot three lines in line chart but m able to see only one line for test category.
FYI u2013 using VS 2008 and crystal report assembly version 10.5
Urgent. Please reply soon.
Thanks
ThakurS

I got the solution.
In Chart Expert - I should use
On Change of -- Year, Category
Show values -- graph values
Thanks,
ThakurS

How to draw multiple lines on same panel??

hiya
i would like to know how can I draw multiple lines on the same panel ?? I have already use repaint(); but it just come out the lastest line (say line 3) i draw .......those previous lines(say line 1 and 2) are disappear ........
Thanks for your help mate

http://www.java2s.com/ExampleCode/2D-Graphics/Line.htm

SNC5.1- How to Publish multiple line items in SNC Web UI (Supplier view)

Hi Experts,
I am working in SAP SNC Supplier Collaboration project. I have a scenario where i am trying to "Publish PO" for multiple line items in Web UI. I am able to confirm each PO line item and Save PO. But if i try to publish one line item at a time, then the system publishes the 1st line item and it does not allow me to publish the remaining PO line items.
All i can do is, Confirm and Save all line items, and then "publish" it at the end. In this way,i can view all the confirmed line items (POA) in SNC. But how do I Confirm/Save/Publish each PO line item?
Appreciate your help.
Regards,
dmohite

Hi dmohite,
As the POC standard process Supplier should give confirmation for all PO items after confirmation of all items it should allow to Published the PO at Header level.
If supplier does not give confirmation for all items it should not allowed to Published the PO at Header level but you are able Published the PO at header level without confirmation of all PO items.
You can implement note no: 1320445 (manual implementation is required).
After implementation of this note without confirmation of all PO items it won't allow to publish the PO at header level.
Please let me know for any clarification.
Regards,
Nikhil

How to outline multiple lines of text

how to I outline multiple lines of text to create a filled outline around a group of text like this:

Bdog,
You may (you have done some of it already):
1) Create the Type and Type>Create Outlines;
2) With the Group selected in the Appearance palette, in the flyout Add New Stroke and set the Stroke Weight and colour as desired, then drag the Stroke below the Contents;
3) Object>Expand Appearance;
4) Lock the original group with the letter shapes and Expand;
5) Pathfinder>Unite, then lock the bottommost path and delete the rest which formed the holes;
6) Unlock the original group with the letter shapes.
You may also wish to simplify the outline.
And what Kurt said.

Urgent How to fulfill multiple lines input in CVI front panel?

Similar Messages

Maybe you are looking for