Urgent :how to get the o/p from report2.5 into excel

hi all
anybody can tell me how to get the report o/p in to excel format.
please help me urgent. any example send me on [email protected]
Regards
onkar

Have you tried to put this question in the report forum?
Fabrizio

Similar Messages

How to get the forecast data from SCM into BW

Hello,
Is there a table or Function module in SCM F&R that can be used to transfer the forecast data from SCM F&R into BW? I dont see any Business content datasources that has the forecast data.
I would like to get the future forecast data. For ex, if there is a forecast for a material and Site for the next 52 weeks, I would like to retrieve
the same from SCM. I dont see any business content. The closest would be 0FRE_ANA_WEEKLY_1. But it has only the past data, not the future data.
Thanks,
SBS.

Hi,
You would follow the same process as you would for getting data from a R3 system to BW, i.e generate datsources on the APO side and then set the extraction to flow from APO to BW. On the BW side, you'll need a source system for the APO, replicate datsources, set up update and transfer rules in the infosource and then load data to the data targets.
Cheers,
Kedar

How to get Coordinates of edges from image into excel

Hi,
I am new to labview and I am doing a project in which i move an XY stage under a laser to etch pictures. So far I have managed to get the stage to move by reading off coordinates from an excel spread sheet and so can draw pictures if I have the coordinates.
I am trying to use the vision module to be able to put any image in and then find the edges, get the coordinates of the edge and so draw the image. Using the vision assistant I do colour plane extraction (to make greyscale) then use shape detection looking for lines with a small minimum length, this gets the information i want and if i click the button on the right that says send data to excell i get a spread sheet with all the information i need. However, I cant get it to automatically save to excell (the write to spread sheet function doesnt work as "The type of the source is 1-D array of cluster of 5 elements."
It would probably be bettter if i could use the output of the vision assistant (shape detection) straight away without having to save to excell but I cannot extract the information i need from the output as none of the array/cluster functions seem compatible with the data. I am using labview 10 and have attached my VI below any help would be greatly appreciated!
Attachments:
image to coords (good).vi ‏109 KB

Hello hzub1,
It seems your having trouble getting to the information in the output of your Vision Assistant. You can use Context Help (Ctrl+H to show) to help understand the contents of a large array or cluster when you hover your mouse over the wire (see below).
Looking at the above I created the code below which breaks out all the contents of one item in the array.
Here I use the Index Array function to break out one element of the array. Each element is a circle descriptor, cluster of 5 elements so I use the Unbundle by Name function to access each of the values in the cluster
I hope this helps,
Jack. W
Applications Engineer
National Instruments

How to get the return values from a web page

Hi all :
how to get the return values from a web page ? I mean how pass values betwen webflow and web page ?
thank you very much
Edited by: jingying Sony on Apr 15, 2010 6:15 AM
Edited by: jingying Sony on Apr 15, 2010 6:18 AM

Hi,
What kind of web page do you have? Do you have possibility to for example make RFCs? Then you could trigger events (with parameters that could "return" the values) and the workflow could react to those events. For example your task can have terminating events.
Regards,
Karri

How to get the current week from sysdate?

Hi sir,
i want to know how to get the current week from sysdate?
thanks

Hi Nicolas
It seems you like to check my post and also make commend ;) thanks for your attention
Have you ever read the posts above and given solutions ?Yes, I did
Have you read the docs ? Yes, I checked
What's the added value here ?Did youYou shared doc with solution(long one), I shared short one which point same solution(Check what Joel posted)..So what is benefit, As you can guess oracle docs are sometimes become so complicated as specialy for beginner...(At least it was like that for me and Belive me somedocs are still sooo complicated even for oracle coworkers ) But for you I dont know ;)
=> Why writting the PS in bold ?Why.. Let me think... Ohh Maybe I am looking some questions(many) and even user get answer they should not changed status so I am reading some posts and try to get problem and loosing time..
So I am putting that PS wiht BOLD because I dont wanna lose time my friend ;) Because While I am trying to help ppl here In same time I am trying to giving support to my customer prod systems. Which mean time is very important for me...
Hope my answer could satisfy you..
One important PS for you.. You may not like my posts (or someone) but my friend I become tired to read&answer and make commend to on your comment which is about my posts.
I am not newbie in forum(At least I fell like that) and I belive I know how I should make post..
Thank you
Regards
Helios

How to get the selection parameters from logical database into one of the t

Hi Sap ABAP Champians,
How to get the selection parameters from logical database into one of the tab in the tabstrip selection-screen.
Please help me for this
Thanks
Basu

Hi
Thanks, that will work, but then I'll have to insert code into all my reports.
I can see that "Application Server Control Console" is able to rerun a report.
This must mean that the Report Server has access to the runtime parameters.
But how?
Cheers
Nils Peter

How to get the date starting from 1 to the current date from the system dat

Dear all,
Please tell me how to get the date starting from 1 based on the system date
and it should come with respect of time also.
example.
suppose today is 6 Dec, 2006
so ABAP report should find the 1 dec. 2006.
Please help me as soon as possible.
Regards,

concatenate sy-datum0(2) '01' sy-datum4(4) into v_firstdate.
or yo ucan use the fm:
HR_JP_MONTH_BEGIN_END_DATE
usage:
    call function 'HR_JP_MONTH_BEGIN_END_DATE'
         exporting
              iv_date             = sy-datum
         importing
              ev_month_begin_date = gv_begda
              ev_month_end_date   = gv_endda.
Regards,
Ravi
Message was edited by:
        Ravi Kanth Talagana

How to get the extension Info from firefox? Do we have any firefox API to communicate with the browser? I couldnt see the HTML of the widget displayed in the toolbar how to access the widget using JS or any way

How to get the extension Info from firefox? Do we have any firefox API to communicate with the browser? I couldnt see the HTML of the widget displayed in the toolbar how to access the widget using JS or any way

Hi,
Thanks for the suggestion. I've been playing around with some of the classes of the java.net package and java.io
Using the URL class i can get the content of the data from a STATIC page and output that response to file so that is does not display to the client broswer.
But this only works if the URL i give points to a static html page.
So the problem i'm getting is if i'm righting in arguments in the URL, this means that server needs to process the arguments i give and its sends back a dynamic result. Because its dynamic the URL class can not handle this and throws me an exception everytime :(
Have u ever tried to do some things like this?
Rahul

How to get the Database type from weblogic Db connection

I want to use database version control in my application . that means different database type use different Sql Statement. Such as in weblogic7.0 if I create SqlServer JDBC pool then I will use some special Sqlserver sql Statement . such as some join statement. If I create Oralce JDBC pool then I have to use different Sql statement . because these two database support different Sql statement.
What my question is how to get the database type from the connection.

For a normal jdbc driver you can use
Connection.getMetaData()
To get the meta data, in particular the getDatabase...() methods.
That might or might not work.
However, at the very least in the server you have access to the weblogic properties so you can parse the pool property to figure it out.

How to get the XML messages from JMS Queue in BPM

I have one requirement in my application.we are sending XML messages to the JMS Queue.How to get the XML messages from JMS Queue and how to Extract the details from XMl.
can you please send me the code to get the XML messages from the JMS Queue.
Thank you,

Hi,
Sure others will have some other ideas, but here's what I typically do to get the XML from a JMS queue. Inside the Global Automatic that pops the messages off the queue you'd have logic similar to this:
artifactInfoNodes as Any[]
xmlObject as Fuego.Xml.XMLObject = XMLObject()
load xmlObject using xmlText = message.textValue
. . . Once you have this, it's a matter of deciding what you want to do with the message. Most times you'll parse the XML (using XPATH statemens), set argument variables and create a work item instance.
Hope this helps,
Dan

How to get the complete data from Webdynpro using a RFC

hi guys,
A form is created in the webdynpro, when that pdf form is called the user have to provide the key field ie the employee number in the form and then when he press the 'go' button a rfc is called and it gives all the details of the employee in the form. Then the user have to input some fields in the form and he have press the submit button. My problem is here, when the user is going to press the submit button that form will be converted to a stream (binary) of data and it is sent to one of the import parameter used in the RFC.
I have created a RFC and created a import parameter of data type XSTRING, since i want to see what exactly R3 is receiving from web dynpro i am writing this contant in the sever as a text file. When i saw that text file i cant see the complete data.
And when i searched in R3 the capacity of xstring is 1024 CHAR, so i dont know how to capture the entire data from webdynpro into my R3.
I give the code what i worte please tell me am i missing anything in my code, or is there any data type which can hold more than 500kb of data which is coming from webdynpro.
FUNCTION ZSEND_MAIL_ATTACHMENT.
""Local Interface:
*" IMPORTING
*"     VALUE(OUT_PLACE_LEVEL) TYPE XSTRING OPTIONAL
*"     VALUE(BIN_DATA) TYPE INDX_CLUST OPTIONAL
*" TABLES
*"      IT_MESSAGE STRUCTURE SOLISTI1
Data Declaration
DATA: gd_cnt TYPE i,
      gd_sent_all(1) TYPE c,
      gd_error TYPE sy-subrc,
      tab_lines LIKE sy-tabix.
Structure Declaration
DATA : BEGIN OF it_file OCCURS 0,
          row(255),
         END OF it_file.
DATA : BEGIN OF i_split OCCURS 0,
row(50),
END OF i_split.
Internal Table Declaration
data : it_receivers like table of SOMLRECI1 with header line."occurs 0.
DATA : objbin LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE. "sOLIX
DATA : it_packing_list LIKE sopcklsti1 OCCURS 0 WITH HEADER LINE.
data : wa_receiver like table of SOMLRECI1 with header line.
data : it_receiver like table of SOMLRECI1 with header line.
data : v_bin_data like SOLISTI1 occurs 0 with header line.
DATA : gd_doc_data LIKE sodocchgi1 OCCURS 0 WITH HEADER LINE.
*data bin_data1 like table of solix with header line.
REFRESH : objbin, it_packing_list, it_receivers, wa_receiver.
CLEAR   : objbin, it_packing_list, wa_receiver, it_receivers.
DATA V_SUBJECT(255) VALUE 'HI'.
gd_doc_data-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( it_message ).
gd_doc_data-obj_langu = sy-langu.
gd_doc_data-obj_name = 'SENDFILE'.
gd_doc_data-obj_descr = v_subject.
gd_doc_data-sensitivty = 'O'.
APPEND GD_DOC_DATA.
Appending The Internal Table it_packing_list
it_packing_list-head_start = 1.
it_packing_list-head_num = 0.
it_packing_list-body_start = 1.
it_packing_list-doc_type = 'RAW'.
it_packing_list-body_num = tab_lines.
APPEND it_packing_list.
*CALL FUNCTION 'GUI_UPLOAD'
*EXPORTING
*filename = V_FILE_PATH
*filetype = 'BIN'
*TABLES
*data_tab = BIN_DATA.
move bin_data to v_bin_data.
append v_bin_data.
*move soli to bin_data.
LOOP AT V_BIN_DATA into objbin.
MOVE v_bin_data TO objbin-line.
    APPEND objbin.
ENDLOOP.
CLEAR it_packing_list.
DESCRIBE TABLE objbin LINES tab_lines.
it_packing_list-transf_bin = 'X'.
it_packing_list-head_start = 1.
it_packing_list-head_num = 1.
it_packing_list-body_start = 1.
it_packing_list-doc_type = 'PDF'.
it_packing_list-body_num = tab_lines.
it_packing_list-doc_size = tab_lines * 255.
APPEND it_packing_list.
data file(255) value '/tmp/bali.txt'.
*Appending The Internal Table it_receivers
close dataset '/tmp/bali.txt'.
open dataset '/tmp/bali.txt' for output in text mode encoding default.
if sy-subrc = 0.
loop at objbin.
transfer objbin to '/tmp/bali.txt'.
endloop.
else.
write 'hi'.
close dataset '/tmp/bali.txt'.
endif.
it_receiver-receiver = '[email protected]'.
it_receiver-rec_type = 'U'.
it_receiver-com_type = 'INT'.
APPEND wa_receiver.
move wa_receiver[] to it_receiver[].
append it_receiver.
*Move wa_receiver[] to it_receivers[].
Clear it_receivers.
if i_OUT_PLACE_LEVEL NE 0.
loop at it_receivers into wa_receiver.
   loop at it_receivers into wa_receiver.
**Function Module To Post The Message To Externa Mail
     CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
       EXPORTING
         document_data              = gd_doc_data
         put_in_outbox              = 'X'
         commit_work                = 'X'
       TABLES
         packing_list               = it_packing_list
         CONTENTS_TXT               = objbin
         receivers                  = it_receivers
       EXCEPTIONS
         too_many_receivers         = 1
         document_not_sent          = 2
         document_type_not_exist    = 3
         operation_no_authorization = 4
         parameter_error            = 5
         x_error                    = 6
         enqueue_error              = 7
         OTHERS                     = 8.
     clear wa_receiver.
ENDFUNCTION.

You have to convert your long string to a table of shorter strings.
There may be other ways, but one possibility is to use a loop to process you string.
while (there is something left)
   put the next e.g. 1024 characters in a new row of your table
endwhile
If you need to reconstruct your string from the table, don't use simple concatenation since it will remove blanks at the end of lines. Believe me (from experience) sooner or later this will happen.
Instead you need to either set the subsections of your long string, or insert from the end of your table and keep shifting the contents (probably less efficient) right

How to get the password of a password protected Excel Sheet using java/jxl

Hi ,
how to get the password of a password protected Excel Sheet using java / jxl program.
plz any one help me .
Ramesh P
[email protected]

If they've implemented the password system correctly there probably isn't a way of getting the password at all.

Urgent:How to get the Sqltext for Oracle Sumbitted Jobs in 10g

Dear All,
Could you help me out in sorting the below problem.
I use to get the current running sql's with following below query in 9i.
SELECT A.SID,B.HASH_VALUE, OSUSER, USERNAME, SQL_TEXT
FROM V$SESSION A, V$SQLTEXT B
WHERE B.HASH_VALUE = A.SQL_HASH_VALUE
AND USERNAME LIKE upper('%SCHEMA%')
ORDER BY B.HASH_VALUE, B.PIECE;
This is will work in 10g also for user-triggered sqls,stored procedures etc.
But when oracle submits job i'm not able find which qurery is running.
Seems For oracle jobs in 10g for V$session contain column SQL_HASH_VALUE as Zero and hence i'm not able find the any sql's running.
Could you please any of you help me out how to get the Sqltext for Orcle submited Jobs in 10g.
Please revert asap as this is very urgent for me.
Thanks in Advance
Anil.

Have you tried to query WF_ITEMS? -- http://etrm.oracle.com/pls/et1211d9/etrm_pnav.show_object?c_name=WF_ITEMS&c_owner=APPLSYS&c_type=TABLE
bde_wf_item.sql - Runtime Data of a Single Workflow Item [ID 187071.1]
Thanks,
Hussein

How to get the query values from the url in a servlet and pass them to jsp

ok..this is the situation...
all applications are routed through a login page...
so if we have a url like www.abc.com/appA/login?param1=A&param2=B , the query string must be passed onto a servlet(which is invoked before the login page is displayed)..the servlet must process the query string and then should pass all those values(as hidden values) to the login jsp..then user enters username and pswd, then there should be another servlet which takes all the hidden values of jsp and also username and pswd, authenticates the user and sends the control back to that particular application along with the hidden values...
so i need help on how to parse the query string from the original url in the servlet, pass it out to jsp, and then pass it back to the servlet and back to the original application...damnn...any help would be greatly appreciated...thanks

ok..this is the situation...Sounds like you have a bad design on your hands.
You're going to send passwords in a GET request as clear text? Nice security there.
Why not start with basic security and work your way up?
%

How to get the selected values from the shuttle

Hi
Please tell me how to get the selected option values from the shuttle leading list.
Thanks

you can also obtain the option values present in the leading and trailing lists using the
following methods:
public String[] getLeadingListOptionValues(OAPageContext pageContext, OAWebBean
webBean)
public String[] getTrailingListOptionValues(OAPageContext pageContext, OAWebBean
webBean)For example, the following code sample returns an array of values in the trailing list, ordered according to the
order in which they appear in the list:
String[] trailingItems =
shuttle.getTrailingListOptionValues(pageContext, shuttle);Thanks
--Anil

Urgent :how to get the o/p from report2.5 into excel

Similar Messages

Maybe you are looking for