Urgent, how to insert un Idoc (already created) from outside of SAP

Hi to all,
I would like to know how to insert an Idoc (alresdy created) from outside of a SAP environnement into SAP.
I know via the code we20 we could insert an Idoc into SAP, does someone have a file PDF to explique how to do it step by step plz?
or could you reply it in details step by step?
caz we are doing a project and we know almost nothing about it, but we need the information urgent.
Tks in advance

Hi,
i think you have missed some of the some of the columns having NOT NULL constraint.ex:Who Columns..
Please check the same in the table..
Thanks
Bharat

Similar Messages

How can we identify idoc is generated from ale or edi

hi friends,
This is interview question asked in tcs,
how can we identify idoc is generated from ALE or EDI.
please give me reply if anybody knows
thanks,
hari priya

Idoc created by ALE is a means of migrating DATA between SAP systems. You configure logical destinations, establish some migrating criteria and the system takes care of getting your data from point A to point B
Where as Idoc created by EDI is described as the interchange of structured data according to agreed message standards between computer systems, by electronic means. Structured data equates to a simple and direct method of presenting the data content of a document. The method of ensuring the correct interpretation of the information by the computer system is defined by the EDI standard."
EDI is a technique used to communicate business transactions between computer systems of different companies and organizations. Note that sometimes the EDI mechanism deployed at a company is often used to interface to other systems within the same organization."
Also refer to these lonks:
www.sapgenie.com/sapedi/edi_sap_training.htm
www.sap-img.com/basis/ difference-between-edi-and-idoc.htm
www.help.sap.com/saphelp_nw04/helpdata/ en/35/26b592afab52b9e10000009b38f974/content.htm
www.help.sap.com/saphelp_nw04/helpdata/ en/35/26b594afab52b9e10000009b38f974/content.htm
http://www.onestopsap.com/interview-Question/edi/
IDocs act as data containers in an ALE scenario. They are just a format of storing application data and then transferred using ALE. Take a look at http://www.sapgenie.com/ale/why_ale.htm and http://www.sapgenie.com/sapgenie/docs/ale_whitepaper.doc for further details on ALE.
Check this link.
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://www.henrikfrank.dk/abapexamples/IDOC/IDOC.htm
http://help.sap.com/printdocu/core/Print46c/en/Data/Index_en.htm
http://help.sap.com/saphelp_47x200/helpdata/en/0b/2a6095507d11d18ee90000e8366fc2/frameset.htm
Reward points if found helpful...
Cheers,
Chandra Sekhar.

How to use the DLLs which created from c++ in Java?

And How to use the DLLs which created from JNI in C++?

Huh?
Are you asking how to do JNI - you should read the tutorial.
Are you asking how to load it - then use System.loadLibrary()
Are you asking what to do with the output from javah - put it in a C file and write some code, compile it into a dll.

How to insert ur own documentaion text from harddisk to sapscript

how to insert ur own documentaion text from harddisk to sapscript

You should upload this standard text to SO10, then you can simply include it into your sapscript.
Regards,
RIch Heilman

How many view object instances can create from Single Entity ?

Hi All,
JDev Ver : 11.1.1.5
I want to How Many view objects can i create from the single entitiy ?
Is there any limit ?
Thanks,
Gopinath

No, there is no limit

How do you delete apps already updated from update page on ios7

how do you delete apps already updated from update page on ios7. old os they disappeared aftr updating. thanks

they will stay there for reference, now that we have automatic updates, so you can go back and see when and what apps updated.

*Urgent*How to insert data from MS SQL to the table that create at the adobe form?

Hi,
I'm using Adobe life cycle designer 8 to do my interactive form. I would like to ask how to insert data from MS SQL to the table that i have created in my adobe interactive form?
I really need the information ASAP as i need to hand in my project by next week... i really appreciate any one who reply this post.
Thanks

Tou need to do a couple of things
1. On the Essbase server, set up an odbc system connection to your MySQL database
2. In the load rule , go to the file menu and select open SQL data source and in the data source put in your SQL statement . A couple of hints. Where it says Select, don't put in the word select and where it say from don't put in from. The system adds them for you. The easiest way ti enter a SQL statement is to do it all in the select area So if your SQL would normanlly say select * from mytable just enter the code as * from mytable in the select area
The click ol/retrieve and enter in your connection info. Itshould bring data back into the load rule. Save the load rule and use it

Its very urgent:how to insert data into database tables

Hi All,
I am very new to oaf.
I have one requirement data insert into database tables.
here createPG having data that data insert into one custom table.
but i dont know how to insert data into database tables.
i wrote the code in am,co as follows.
in am i wrote the code:
public void NewoperationManagerLogic()
ManagerCustomTableVOImpl vo1=getManagerCustomTableVO1();
OADBTransaction oadbt=getOADBTransaction();
if(!vo1.isPreparedForExecution())
vo1.executeQuery();
Row row=vo1.createRow();
vo1.insertRow(row);
in createPG processrequest co:
public void processRequest(OAPageContext pageContext, OAWebBean webBean)
super.processRequest(pageContext, webBean);
ManagerInformationAMImpl am=(ManagerInformationAMImpl)pageContext.getApplicationModule(webBean);
am.NewoperationManagerLogic();
process form request:
public void processFormRequest(OAPageContext pageContext, OAWebBean webBean)
super.processFormRequest(pageContext, webBean);
if(pageContext.getParameter("Submit")!=null)
ManagerInformationAMImpl am=(ManagerInformationAMImpl)pageContext.getApplicationModule(webBean);
am.getOADBTransaction().commit();
please help with an example(sample code).
its very urgent.
thanks in advance
Seshu
Edited by: its urgent on Dec 25, 2011 9:31 PM

Hi ,
1.)You must have to create a EO based on custom table and then VO based on this EO eventually to save the values in DB
2.) the row.setNewRowState(Row.STATUS_INITIALIZED); is used to set the the status of row as inialized ,this is must required.
3.) When u will create the VO based on EO the viewattributes will be created in VO which will be assigned to the fields to take care the db handling .
You must go thtough the lab excercise shipped with you Jdeveloper ,there is a example of Create Employee page ,that will solve your number of doubts.
Thanks
Pratap

How to insert the data system created table throuch RFC

How can i Insert any data system created table like MARC T100w .... throuh RFC.
I created Funstion module.
MY Email Address : [email protected]
[email protected]

Hello Chandan
It is pure madness to update or modify tables like MARC or T100W directly, whether on remote systems or locally.
If you need to update or modify such tables on remote system search for the appropriate <b>BAPI </b>(e.g. in case of MARC use BAPI_MATERIAL_SAVEDATA).
Regards
Uwe

How to trigger workflow for already created purchase order ?

HELLO EXPERTS
let me clear my scenario first . i have 1 purchase order whose workflow is not triggered . means it is showing me message no workflow that have already worked for this object.i have created 1 more purchase order taking reference of this purchase order means both are same same message for this po also. it was happening because event linkage for the business object bus2012 is not activated but now it is enabled and i have created third purchase order with reference to above po means this third po is also same as above 2 no change other than po number but for this workdflow is getting triggered . now i want to trigger workflow for orignal first po but for my first po it is showing me same message that no workflow that have already worked for this object. what i have to do to trigger workflow for this po. i have performed this steps in test system. i have workflow number

Hello !
      You can trigger the workflow from SWUE.Enter bus2012 and created for object type and event respectively.
      Click object key button where enter the purchase order number which have been already created.
      But, why do you want to trigger the workflow again for already created purchase order ?
Regards,
S.Suresh

Urgent! How to insert into and query video from database in forms???

In forms 6i demos CD, There is a demo form ocxvideo.fmb,
but it just for video in file system.
I want to read *.avi file from file system, and insert into
database, and query from my forms.
I create table with long raw, with default forms wizard,
long raw for [image] item in forms.
I change item type to ActiveX ,and right_click mouse
==>[Insert object]==>Oracle Veideo control.
still can not insert avi data into database and query from my forms.
Please give me some advice to solve this problem?
Thank you very much!
Ming-An
[email protected]

In forms 6i demos CD, There is a demo form ocxvideo.fmb,
but it just for video in file system.
I want to read *.avi file from file system, and insert into
database, and query from my forms.
I create table with long raw, with default forms wizard,
long raw for [image] item in forms.
I change item type to ActiveX ,and right_click mouse
==>[Insert object]==>Oracle Veideo control.
still can not insert avi data into database and query from my forms.
Please give me some advice to solve this problem?
Thank you very much!
Ming-An
[email protected]

Assign meter that already created from PM to rental object

Dear Expert,
Please kindly advice on how to assign the meter that already created (already has the measuring point ) into pooled space or rental object.
When I use REBDRO --> Meter Tab
the transaction allows only creation of new measuring point , Field Measuring Point is disable and allow to assign internally from the system
Best regards,
Tima

Hi Tima,
I dont think it is possible to assign the measuring point already created to RE Objects. As, if we go to transaction IK01 we select the Measuring point object as "IME" and then select the object type and ID. If we use any other measuring point object we dont have the option to enter the Rental object type and rental object ID to create the measuring point. So any measuring point created with any other Measuring point object cant be attached to the rental objects.
Even if we directly create measuring point from rental object, the object is created with "IME" Measuring point object.
Regards,
Deepak M

IDoc to Create Shipment Document in SAP

Hi,
I want to create the shipment document in SAP via EDI message from freight forwarder and subsequently update the shipment document(VT02N) statuses via EDI like planned/loaded/shipment end etc....
I am reasearching on the Idoc type for that...I found SHPMNT03 etc could be used to create/change document but I don't know where the Transportation planning point field exists in the Idoc type. Please help me to how could I create the shipment document...
I am able to create the shipment document using TPSSHT01...but not sure whether it would be good as it's used with TPS and we don't have any external TPS. We just want to create shipment document in SAP based on freight forwarder edi messages 856 I believe
I am new to EDI
Thanks
Chil

We used a program to create the IDoc but I don't see a transportation planning point anywhere in it. I think it should be picked up automatically from the deliveries and I wouldn't fixate on that. Here is the code fragment, but you don't need to fill in all those fields:
e1edt20-shtyp = '0003'.
      e1edt20-signi = i_table-route.
      e1edt20-exti1 = i_table-route.
      e1edt20-exti2 = i_table-driver_num.
      e1edt20-tpbez = i_table-driver_name.
      i_edidd-sdata = e1edt20.
      i_edidd-docnum = w_docnum.
      i_edidd-segnam = 'E2EDT20001'.
      APPEND i_edidd.
      e1adrm4-partner_q = 'OTP'.
      e1adrm4-partner_id = '0001'.
      i_edidd-sdata = e1adrm4.
      i_edidd-docnum = w_docnum.
      i_edidd-segnam = 'E2ADRM4001'.
      APPEND i_edidd.
      e1adre4-extend_q = '305'.
      e1adre4-extend_d = '0001'.
      i_edidd-sdata = e1adre4.
      i_edidd-docnum = w_docnum.
      i_edidd-segnam = 'E2ADRE4001'.
      APPEND i_edidd.
    e1edl20-vbeln = i_table-vbeln.
    i_edidd-sdata = e1edl20.
    i_edidd-docnum = w_docnum.
    i_edidd-segnam = 'E2EDL20'.
    APPEND i_edidd.
From what I remember, this IDoc worked rather strangely and I had to fill in some fields for no obvious reason (e.g. both e1edt20-signi and e1edt20-exti1 when SIGNI is really the one we needed). At some point, I just tried filling in all the possible fields to get past errors. Like I said, it just takes some trial and error.
Unfortunately, I don't have access to that system anymore and have no further information. Also we didn't do any shipment changes. You might want to search in ABAP forum. Good luck.

IDOC to create from outbound delivery from sales order as INBOUND process

Hi Experts,
We have third party interface for sales processing. Sales order, Outbound delivery and PGI will be done in Third party software and XML files will be send to SAP.
We have to process this XML file into SAP with IDOC.
Sales order processing is done but i am not able to find correct IDOC type for creating outbound delivery.
Can you suggest Basic IDOC type / Message type and process code for the same.
Regards,
Sahadev Abhyankar

Good morning !
In the transaction WE20 to create the customer EDI KU with EM function.
Output parameter: message type DESADV and basic IDOC DESADV01.
I associate the IDoc message type to LAVA, you should link it to the XML file, that is not how.
Please : Could you please explain how you linked the XML file to IDOCS to create sales order ?
Sorry for my poor English
A greeting.

How to insert data into a table from an xml document

using the XmlSql Utility, how do I insert data into a table from an xml document, using the sqlplus prompt.
if i use the xmlgen.insertXML(....)
requires a CLOB file, which i dont have, only the xml doc.
Cant i insert directly from the doc to the table?
the xmlgen examples I have seen first convert a table to a CLOB xmlString and then insert it into another table.
Isnt there any other way?

Your question is little perplexing.
If you're using XML SQL Utility from
the commandline, just use putXML.
java OracleXML putXML
null

Urgent, how to insert un Idoc (already created) from outside of SAP

Similar Messages

Maybe you are looking for