Urgent : How to use pricing scale base type "G" in CRM?

Hi Gurus
We are facing a problem regarging scale base type G which is scale based on a formula in SAP ECC side. I one of our Z condition type wea re using scale base type G and using a formula 901 to calculate pricing in SAP R/3.
But scale base type "G" is not supported in CRM as the entry is not there in /SAPCND/T681VS and we could not find any ways to include it in CRM. We even tried by entering the entried in the table by debug method but then the records, specialy the supplement record, are not replicating correctly in CRM from ECC.
So for time being we changed the scale base type to C from G in ECC side.
Can you please guide me if there is any way to use scale base type G in CRM? Or what can be the way around to use scale based on formula in CRM ?
Is it possible to change the scale base type while the records are getting replicated to CRM?? But how will it work then.
This is very urgent.
An useful answer will be highly appreciated.

Hello Singamshetty and Micheal,
We are facing exact same issue. Problem is that formula 901 does not get called in ECC with scale base type = 'c' in condition type ZSH1. Because of this, order and billing document in ECC have wrong condition value and then order document in CRM also gets wrong value once the billing document is saved.
This is highly critical issue as it's a big $ loss. Any expert, please suggest how to correct it?
Thanks
Sandeep

Similar Messages

Scale base type

Hi experts,
There're several sap standard scale base types which you could set up in the conditon type, like 'Net value', 'Quantity', 'Gross weight'. But I cannot use one of them, what I need is take the value of former condition steps of pricing procedure as the value of the scale base type for the calculation. Like
Pricing procedure:
10 YKP1 ........(the result is, let's say 40)
20 YWi1 .....(there is scale base setting set in the condition type, 10-30=>1, 30-50=>2, 50-100=>3 I want to get the result of 2).
Is there anyway to enhance it? Or is the scale base formula for it?
Ciao, Marco

Hi Marco,
as I understand your requirement you could use a value based scale base type along with the appropriate step numbers for the condition type with scales in the pricing procedure. So the line with condition type YWi1 in your pricing procedure should contain the entry 10 in the from and to steps. With the from and to steps you can also specify a range of lines in the pricing procedure (e.g. steps 10 to 19). If you need a more sophisticated algorithm for the calculation of your scale base instead of a simple aggregation of a sequence of lines in your pricing procedure, you could make use of a scale base formula and asign it to the condition type YWi1.
Best Regards,
Michael

How to use std quality document types

Hi, Pls advise how to use std quality document types like Print list, Quality agreement, Technical delivery terms? i mean for what purpose those will be used?

hi
Quality Agreement;
Quality aggrement document type is used in Quality Info Record.If you maintain control key regarding Qaulity Aggrement you must maintain the Qaulity agg otherwise PO or GR wil be blocked.
Technical delivery:
Technical dele term are maintained in Material master-->additional data -->documents.
if you select the control key which has reference of Technical dele term you have to maintain this in MM otherwise PO or GR will be blocked.
Q01 Q-Agreement / MM-PUR
Q02 DelivTerms / MM-PUR
Both are customization in SPRO
Regards
Sujit

How to download ECC scale basis into CRM system?

Hi All,
Please share / suggest how to download ECC defined scale basis into CRM system (ECC to CRM)?
We used DNL_CUST_CND & DNL_CUST_CNDALL. Do we need to update any Tables in these Objects?
Thanks and Regards,
Fedor.

Hi,
you can create your own condition object(r3ac5), and in the new object > (tables/structures) tab change the condition table (A-)
please be noted that the table (KONW) which pass the scales, exist by defualt
u have to execute your object to replicate the data, and to be konwn your 2 objects which had run just for customzing not for data
feedback me if u have any Q.
الحمد لله الذي علمنا
samer shamandi

How to create new scale basis for shipment costs without modification?

Hi,
at the moment I am trying to create a new scale basis for shipment costs.
It is not a problem to create a new scale basis in table view V_TVFRFQ. The creation of an Append structure in the communication structure KOMK is easy, too.
The problem is the following:
When creating a scale for a scale basis with transaction VS01, the system picks some screens out of function group V57S. For my new scale basis there is of course no screen in this standard function group.
So my question:
How to create/generate a screen to create scales for my new scale basis without a modification of function group V57S?
To me it makes no sense that SAP offers a possibility to create customer owned scale bases but then gives the customer no possibility to create an input screen for that scale basis without modification. Therefore I think it should be possible to generate such a screen in some way.
If you have some idea, let me know.
Thanks!
Christian

Hi Christian,
We are currently facing exactly the same problem you described in your message in January 2009. I see that you have marked this as "answered", and was wondering if you would mind explaining how you overcame this issue?
Any assistance would be hugely appreciated.
Many thanks,
Kaushik

How to use the knowledge base category hierarchy?

Hi !
I read documents about the knowledge base, I know Oracle Text supplies English and French knowledge base, but I would like to know how to use it, how to handle it. If I want to had some themes, or delete some.
Is there a table containing the knowledge base?
Is there someone can help me? Thanks in advance
Have a nice day
PS : sorry for my poor english

Thank you very much M. Omar R Alonso for your reply.
I checked in the documentation how to use the ctx_query.hfeedback procedure, and I tried the example provided. But it doesn't work, the bt_feedback, rt_feedback, nt_feedback columms have never filled.
I'm not sure that the knowledge base is already supplied in Oracle Text, because also, when I execute a query like :
select ID_TXT, score(1) SCORE from TEXT_BASE where contains("idx_txt","sport",1)>1 order by SCORE DESC
The results are the same as
select ID_TXT, score(1) SCORE from TEXT_BASE where contains("idx_txt","about(sport)",1)>1 order by SCORE DESC
So, I don't know if it uses the knowledge base or not.
Thx again

Hi all!How to use the fault message types

Hi all, i am new beginner on XI.
I have read the introduction in SAP Library about
fault message types
but the steps of how to use fault message are clear
could you help me?
could you give me some guide or docs or links?

Hi,
These might help you:
http://help.sap.com/saphelp_nw04/helpdata/en/f3/c26c3cbfac384fe10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/5d/a45c3cff8ca92be10000000a114084/frameset.htm
Regards,
Chandra

Urgent: how to use cookies or session in javafx

Hi....
i am new to javafx and need help to learn how to use cookies and session in javafx.i want to create a simple website using javafx.....
Urgent reply is requested
mufaddal

Please correct me if I'm wrong: I think LiveConnect is not supported on IE, and Mozilla has plans to discontinue it.
Didn't an earlier version of JavaFX allow access to the Applet instance, including the AppletContext? Seems to me, just generally, that JavaFX applets are hobbled unless they have that functionality available. Cookies are one example. Also applet parameters, hyperlinks, and the browser status display.
Especially hyperlinks.

URL iView Problem - How to Use URL Parameter of Type 'User Information'

Hello URL iView experts
I am currently working on integration of backend-functionality with the help of an URL iView.
I want to use a parameter of type 'User Information'. In SAP Help Library it is said, that it is possible to set the value of a parameter according to a dynamic query on the users attributes. (Link SAP HELP)
It is also said, that one can retrieve the Logon ID of the users account.(Attribute Name: j_user -> Link SAP HELP Attributes )
I can choose the type 'User Information' but i don't know what to specify in the field 'Value'.
I have made a screenshot of the problem.->[Link to screenshot|http://img66.imageshack.us/img66/7782/urliviewproblemfrsdnthrel3.jpg]
But if i am calling the application this way, he doesn't retrieve the Logon-ID of the account, but he just uses the 'j_user' as value for the parameter.
Can you tell me, what i need to specify in the field value?
Best Regards
Marcus
Edited by: Marcus Böhm on Jun 2, 2008 1:22 PM

Hi Marcus,
> It is also said, that one can retrieve the Logon ID of the users account
This is not correct; on the help.sap.com-page concerning the URL-iView-Parameters, it is printed that "other attributes (general, account, group, role) are not supported". The j_user attribute is part of the account group, so - not supported.
For your needs, it may be a better choose to use the AppIntegrator, which offers such a possibility by using "<User.LogonUid>"; see http://help.sap.com/saphelp_nw70/helpdata/EN/36/5e3842134bad04e10000000a1550b0/frameset.htm and https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e0cbc309-ff89-2a10-8bad-bcde4c152ecb
Hope it helps
Detlev

Its urgent how to use calss file of jar located in lib folder

how to use calss file of jar located in lib folder.
i want to use RowSetDynaClass class which is in beanutil jar file which is in my lib folder .if i use that class in my jsp following error is coming.
Class RowSetDynaClass not found.
RowSetDynaClass resultSet = new RowSetDynaClass(rs, false);
how to access class in jar file.
please help

You have to either refer to the class in its fully quallified name, or import it into the JSP:
<%
some.full.packagename.RowSetDynaClass resultSet = new some.full.packagename.RowSetDynaClass(rs,false);
...-or-
<%@ page import="some.full.packagename.RowSetDynaClass" %>
<%
RowSetDynaClass resultSet = new RowSetDynaClass(rs, false);
...As long as the class has public visibility and you have re-started the server/servlet context since you added the JAR.

How to use OCR Font A type by the time of writing some text into Pdf fil

Hi,
I am generating one pdf file in java. How can I use OCR Font A for text of pdf file ..Please can any one help where can I get OCR Font A and how to use that one in java ... I want to write some text into pdf file and that text should use OCR Font A family ...
Thanks.

This document shows how to disable OCR during conversion; just do the opposite: https://forums.adobe.com/docs/DOC-3062

Pricing Scale Basis

Hi
Scale Basis is Grey out. Can we change the scale basis from B to C while creating condition records.
Please share your thoughts.
Thanks
Sudhir

Hi,
In condition record u can not change scale you can change it in
V/06 >>> select condition >>> details >>> scale
Kapil

How to use the ColumnDescriptor's type as CLOB?

I want to build a metric which are used to record the content of a file. But the length of the content is too long, it may not be stored with a ColumnDescriptor's type STRING. I tried to make the TYPE='CLOB', but failed. I though it might be something wrong with my output, but I have no idear how to make it right. Does it supposed to point to a file? Could anyone tell me how to do it?
Here is my code:
metadata.xml
<Metric NAME="TEST_LOB" TYPE="RAW" HELP="NO_HELP">
<TableDescriptor TABLE_NAME="TEST_LOB">
<ColumnDescriptor NAME="TIMES" COLUMN_NAME="TIMES" TYPE="STRING" IS_DATE="TRUE"/>
<ColumnDescriptor NAME="CONTENT" COLUMN_NAME="CONTENT" TYPE="CLOB" />
</TableDescriptor>
<QueryDescriptor FETCHLET_ID="OSLineToken">
<Property NAME="command" SCOPE="GLOBAL">"%perlBin%/perl" "%scriptsDir%/emx/%TYPE%/testlob.pl"</Property>
<Property NAME="delimiter" SCOPE="GLOBAL">%mydelimiter%</Property>
<Property NAME="startsWith" SCOPE="GLOBAL">em_result=</Property>
<Property NAME="errStartsWith" SCOPE="GLOBAL">em_error=</Property>
</QueryDescriptor>
</Metric>collection.xml
<CollectionItem NAME="TEST_LOB">
<Schedule>
<IntervalSchedule INTERVAL="5" TIME_UNIT="Min" />
</Schedule>
<MetricColl NAME="TEST_LOB" />
</CollectionItem>The output of script testlob.pl looks like as below. It started with "em_result=", and delimited by "|".
em_result=2009-07-30 15:30:35|*** (1) TRANSACTION:
TRANSACTION 2 1235033361, ACTIVE 0 sec, process no 14811, OS thread id 1158457696 inserting
mysql tables in use 1, locked 1
LOCK WAIT 3 lock struct(s), heap size 368, undo log entries 4
MySQL thread id 26693314, query id 5239203160 192.168.95.138 passportuser update
insert into digital_id_info (digital_id) values (0x3930303636363734)
*** (1) WAITING FOR THIS LOCK TO BE GRANTED:
RECORD LOCKS space id 45 page no 14 n bits 392 index `idx_unq_digitalid` of table `passport/digital_id_info` trx id 2 1235033361 lock mode S waiting
Record lock, heap no 5 PHYSICAL RECORD: n_fields 2; compact format; info bits 0
0: len 8; hex 3930303636363734; asc 90066674;; 1: len 4; hex 0014dae7; asc ;;
*** (2) TRANSACTION:
TRANSACTION 2 1235033200, ACTIVE 0 sec, process no 14811, OS thread id 1215965536 setting auto-inc lock
mysql tables in use 1, locked 1
3 lock struct(s), heap size 6752, undo log entries 323
MySQL thread id 26693430, query id 5239203161 10.10.71.74 passportuser update
insert into digital_id_info (digital_id) values (0x3930303637343639)
*** (2) HOLDS THE LOCK(S):
RECORD LOCKS space id 45 page no 14 n bits 392 index `idx_unq_digitalid` of table `passport/digital_id_info` trx id 2 1235033200 lock_mode X locks rec but not gap
Record lock, heap no 5 PHYSICAL RECORD: n_fields 2; compact format; info bits 0
0: len 8; hex 3930303636363734; asc 90066674;; 1: len 4; hex 0014dae7; asc ;;
*** (2) WAITING FOR THIS LOCK TO BE GRANTED:
TABLE LOCK table `passport/digital_id_info` trx id 2 1235033200 lock mode AUTO-INC waiting
*** WE ROLL BACK TRANSACTION (1)the scripts for creating table "TEST_LOB",
CREATE TABLE TEST_LOB
TIMES DATE,
CONTENT CLOB
);Any help will be appreciated!!!
Thanks,
Satine

Sorry, that doesn't solve my problem. Please read the question more closely - I want my USERS to be able to do this without changing their configurations. My users are public school elementary teachers and parents. I can't ask them to toggle any settings - I'm looking for a way that my users can do this on their own.
Thanks

How to use QTI for Comprehension Type Question

Hi,
I want to use JQTI V2.04 for building up comprehension type Question plz. help

Sorry for not giving details.
I just want to know how the XML for “comprehension” type question looks like with QTI specification.
My comprehension type question may contain sub question of type like multiple choice question, single choice question, true false, match the following, fill in the blanks etc.
I’m trying to use JQTI library(http://jqti.qtitools.org/) to create such kind of questions.

Urgently, how to use the EEWB to ad new field in the business partner page

Hello All
I am working on CRM 5.0 EEWB
I am trying to add new field in the business partner page I followed the steps for creating the project and the extension but I faced some problems
1-I chose the package BBP_BUPA_MAIN BBP Business Partner General
I created two transport requests for the workbench and the customizing
2- I created an extension with EEW Bus. Object: BUPA and extension type: ADD_NEW_FIELDS
3- I got an error that <b>"Object DOMA ZBU_009XN27S is in the name range reserved for customers. The object cannot be assigned to package BBP_BUPA_MAIN, since it belongs to a different name range or namespace"</b>
I tried to change the package but the same problem occurs and if I choose a custom made business package I get a similar error but, before the wizard starts
I want to know the exact steps to create new field using the EEWB
Regards
Jacopo Francois

Hi,
Error info: "Object DOMA ZBU_009XN27S is in the name range reserved for customers. The object cannot be assigned to package BBP_BUPA_MAIN, since it belongs to a different name range or namespace"
Clearly states that you need to assign some different name to the package which is not reserved by SAP as Z### is already reserved by SAP and thus you will not be able to create the enhancement in the same.
Best Regards,
Pratik Patel
<b>Reward with Points</b>!

Urgent : How to use pricing scale base type "G" in CRM?

Similar Messages

Maybe you are looking for