Urgent : I want to modiy the values that are transfered from R/3 to CRM

I have created a custom field in both CRM and R3. When the tha value of the firld is changed in VA02/Va01 i want the change the value in between. i want to change the value before it is changed in CRM how can i do it...
Thanks in advance.

Hi Bharath
You can use the BADI 'CRM_DATAEXCHG_BADI'. In this BADI, use the method 'CRM_DATAEXCH_R3D_MBDOC_FILL'. this is for data transfer from R/3 to CRM.
Please reward points if helpful!!
Warm regards
Debolina

Similar Messages

How to capture the values that are being passed to a function module?

Hello Experts!
While executing the transaction SBWP to send a document the FM 'SO_DYNP_SHORT_MESSAGE' gets triggered as soon as the SEND button is pressed would anybody please let me know how i can capture the values that are being passed to it in the process of sending a document?
Regards
Sanguine

Hi
well, I'm not asking you to explain about how an implicit enhancement can be done. i was just referring to the two options posted in the reply. Is there any other way out apart from the implicit enhancement option. i do find class CL_BS useful as the Method ADD_RECIPIENT gets triggered . even though there's no attachment option in the screen that pops up after the method ADD_RECIPIENT is triggered. would anybody suggest me as how to proceed further to capture the values though without attachment details
Regards
sanguine

HT1751 I want to copy the songs that are in my ipod in to an external hard drive and not from a itunes folder in my computer.

I want to copy the songs that are in my ipod in to an external hard drive and not from the itunes folder in my computer (the reason being is that the songs in itunes folder are not to my taste. Please help?)
I have the orignal ipod 120gb
Many thanks.
Afzal

Bare in mind that Sync is only oneway, from PC to your device. Unless you have the same music on your PC, iTunes is going to wipe out what you have on your device if you are syncing to a new library.
You can only transfer Purchased music over to Itunes on your PC.
iTunes Store: Transferring purchases from your iOS device or iPod to a computer
http://support.apple.com/kb/HT1848
As for you own music, you may have to use a third party software. A good Free one is called Sharepod which you can download from Download.com here:
http://download.cnet.com/SharePod/3000-2141_4-10794489.html?tag=mncol;2

HT5622 I want to check the emails that are sent to my Apple ID, is that possible? If so, how?

I want to check the emails that are sent to my Apple ID, is that possible? If so, how? I have an important message to read and it was sent to my Apple ID account at @me.com

There are no IDs that end in apple.com. There are mac.com, me.com, and icloud.com.

My iMac holds my main iTunes account. How do I find out a list of all the devices that are authorized from this computer?

My iMac holds my main iTunes account and it shows 4 devices are authorized to play iTunes. I can only name 3. How do I find out a list of all the devices that are authorized from this computer?

I don't believe this is possible, but you can deauthorize all your computers and start over if you are concerned.
See here
Best of luck

How the freight cost are transferred from condition type of shipment cost document to service entry sheet and collected in service PO item

Dear Experts:
could you please share with me the knowledge for below topic:
How the freight cost are transferred from condition type of shipment cost document to service entry sheet and collected in service PO item, because these three objects use three different pricing procedures, and different condition type.
how did the condition type of service entry sheet know to copy the value of whcih condition type in the pricing procedure of shipment cost document?
Is this SAP standard function OR there need an enhancement to do that?
I didn’t find related condition value copy setting in background, could you please share related setting with me? Thank you very much for your kind help!
Best regards,
Andy

Hi, Gopi,
Glad to see your feedback, but i still have question on your feedback:
which condition type in the pricing procedure of service entry sheet should know to capture the net value of shipment cost doc? becasue there are so many condition types,
And i have checked the corresponding condition type (PRSX) of service entry sheet pricing procedure in my SAP system, this is a self-defined condition type, but NO any calculation routine maintained for the condition type (PRSX), how did the condition type (PRSX) know to copy the total cost of shipment cost document?
Below is the example and another question:
what the relationship between the pricing procedures at service PO item level and service line item level?
1. The freight cost in shipment cost document—including used condition type and pricing procedure
The pricing procedure of shipment cost document
2. The freight cost in service entry sheet—including used condition type and pricing procedure
The pricing procedure of service entry sheet--the pricing procedure at service line item level
3. The freight cost in service PO item—including used condition type and pricing procedure:

How to zero the values that are greater than 0 at time 0?

Hello, New user,
I would like to know how to zero values that are greater than 0 at time 0. I am totalizing gas flow and understand how not to add the negative numbers but am unsure about the positive numbers at 0 flow. I hope I have explained this good enough.
Thank you,
Lisa

I don't understand why the value which should be 0 is actually greater than 0.
How do you determine that the value should be 0, such as no flow, even if the value is greater than 0?
Ryan Shi
Hello Ryan,
The system itself may have an offset of 0.1 V which in the program is related to flow. I do not wish to add this .1 as flow. I want to beable to reset the values to 0 and then when there is flow, to add the flow. If you purchase a program from some vendors you can zero the channel, that is my goal. I want this to be automatic when a switch is pressed. Such as: for 20 seconds, average channel, and use that value as 0 flow then add flow?? I was told averaging may work??
Thank you again,
Lisa Williamson

How to seperate the pulses that are acquired from real world according to their pulse heights in LabVIEW.

Hi everybody,
Can any one help in getting out this. Actually I am acquiring gamma rays from proportional counter into the LabVIEW, Coming to the analysis part, I need to seperate the pulses according to their pulse heights. After seperating them I need to digitise the pulses that are seperated. So I request you to sort out this as early as possilbe.
Thanks in advance.
A.Giridhar Yadav.

I am confused about your description. You indicate that you are acquiring the signals but then you want to digitize them later? Any signal processed by LabVIEW has already been digitized because the software only works on numbers, not continuous voltages.
1. How are you acquiring the data from the proportional counter into LV? What DAQ device are you using? What sample rate?
2. What is the duration of the pulses? Gamma pulses from PMT and scintillators are usually rather short.
3. Do you have any log amplifiers or other signal conditioning between the detectors and the DAQ device?
Lynn

I purchased a Maxtor Ext. Hardrive several years ago and cannot locate the fire wire. Since then I want to take the files that are on the Maxtor and transfer them to a new PC I purchased. What is the best way to go about doing that?

I purchased a Maxtor External Hard Drive several years ago and cannot locate the Fire Cable that came with it. I want to transfer the files in the Maxtor to a new PC I recently purchased. How would I go about doing that?

Just buy a new cable

Obtain count of values, including the values that are not in the table

I have values: 1,2,3,7,8,9
and my table contain value 3,7,8,3
I need get result of select
-value- -count-
-1-     -0-
-2-     -0-
-3-     -2-
-7-     -1-
-8-     -1-
-9-     -0-
I tried
select value, count(value) from table where value in ('1','2','3','7','8','9') group by value
but I get only
-value- -count-
-3-     -2-
-7-     -1-
-8-     -1-
Thank you for help

Thank you for help but this is not functional if values are text (varchar).Have you mentioned that ? In your example post you have mentioned only numeric values. Why don't you try yourself, When you have an working (? Oops, there is no version mentioned by OP, So may not be working) example ?
SQL> SELECT * FROM v$version;
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - Prod
PL/SQL Release 10.2.0.3.0 - Production
CORE    10.2.0.3.0      Production
TNS for 32-bit Windows: Version 10.2.0.3.0 - Production
NLSRTL Version 10.2.0.3.0 - Production
SQL> SELECT job,COUNT(job)
2 FROM emp
3 GROUP BY job;
JOB       COUNT(JOB)
CLERK              4
SALESMAN           4
PRESIDENT          1
MANAGER            3
ANALYST            2
SQL> SELECT column_value,COUNT(job)
2 FROM emp e, TABLE(sys.odciVARCHAR2list('CLERK','PROGRAMMER','SALESMAN'
3                                        ,'SALESMAN','DBA','PRESIDENT','MANAGER'
4                                        ,'Architect','ANALYST')) t
5 WHERE e.job(+)=t.column_value
6 GROUP BY column_value
7 ORDER BY 1;
COLUMN_VALUE
COUNT(JOB)
ANALYST
         2
Architect
         0
CLERK
         4
COLUMN_VALUE
COUNT(JOB)
DBA
         0
MANAGER
         3
PRESIDENT
         1
COLUMN_VALUE
COUNT(JOB)
PROGRAMMER
         0
SALESMAN
         8

How can I set 50 variables with the values that are inside an array?

Hello,
I have and array of numbers and an array of strings ( the name of the variables) These values are acquired every time from hardware.
Now I created a graphical interface with 53 of these variables, and I need to create a link to update them with the correct value.
Thanks
Dario
Attachments:
Example_insert_53_values_in_53_varialbes.vi ‏23 KB

Dario,
you have posted your question to the Profibus forum. As your question is not directly related to Profibus, but to LabVIEW programming, your better should post it to the LabVIEW forum.
Thanks
Jochen

HT201302 How do you transfer videos from the iphone that was transfered from a samsung

My aunt transferred the videos she took on her Samsung phone to her iphone and wants to transfer to the computer how do i do that?

Requires third-party software, like this:
http://www.wideanglesoftware.com/touchcopy/index.php

The apps that are downloaded from itunes store are not getting installed pls help

I am currently using the latest version of itunes. And i am using an iphone 3g ios 4.2.1 version. And whenever i am downloading any of the free application from itunes store from my pc the application is getting download properly and when i try installing it on my phone it gets installed but after installing there is a process of finishing sync when that appears the mark from that application disappears on its own and the app is not installed on the phone.
Please help me
Thank you

Oooft thanks for rapid responce!! It is same account as purchased app, defo compatible (3 of them used to be on ipod then disappeared) and this is only computer I've ever used with ipod. I also did a software update just incase and tried dragging and dropping them into device but it won't let me!!!!! I will try the restictions thingy!

How can I get iTunes to recognize the apps that are missing from the library screen but still on the machine??

My apps are not showing-up in the iTunes library but they are present in the apps folder. How can I get iTunes to recognize their presence?
Library-Apps-All (only three of several hundred appear).
Apps are still present in Users-Music-Mobile Applications
I am running iTunes 11.0, OS X 10.8.2 on a Mac Pro.
Ran Disk Utility, Techtool, Disk Warrior and then reinstalled Mountain Lion, updated it and repaired permissions. No change.
There is a file that says 'iTunes Library (damaged), which is the iTunes Database file. How can that file be re-created?
Any technical help on replacing that file with a new, fresh one would be appreciated!

It has always been very basic to maintain a backup of media and other important files. If you chose to reinstall the OS without having a backup, well that just is not smart.
If you are in the US and running iTunes 10.3 or later, iTunes purchases can be redownloaded via iCloud. Simply log into the iTunes store, select purchases, purchase history and redownload the content.
If you are not in the US.... well, seems you just learned and important and possibly expensive lesson.

User-exit on APO side for the deliveries that are coming from R/3

Hi,
When a delivery is created in ECC for a VMI customer, it creates an EI order in APO. We need to record some details of these orders on the APO side. Can you please let me know the user exit/BADI that gets triggered when a delivery comes to APO through CIF which we can use for our requirement?
Thanks in advance.

Hi,
You can use APOCF006(EXIT_/SAPAPO/SAPLCIF_PU_001) CIF User exit on APO side for CF_OBJECTTYPE = B(Delivery).
I hope this will help you.
Regards,
Saurabh

Urgent : I want to modiy the values that are transfered from R/3 to CRM

Similar Messages

Maybe you are looking for