Urgent: IDoc failures due to Chart of Accounts Not Found

We are posting IDoc FIDCC2.
The IDoc is failing with Error "G/L account 'XXXXXX' is not defined in chart of accounts XXX".
We went into Transaction f.10 and can see the the G/L account setup correctly.
I believe there is some configuration issue and these accounts are setup incorrectly. Please advice....
thanks!!
Ron

Go to FSP0 and check whether the account exists in CoA.
Hope that helps..
Thanks,
Nandita

Similar Messages

  • Error in Sales order - Consumption account not found

    Hi Gurus,
    I am facing an error in Sales order - 'Consumption account not found'. The scenario is third party. In sales order, it says 'Consumption account not found'. the item category is TAS and scedule line category has general modification key 'VKA'. And as it is third party, thr is no movement type for the schedule line category. The valuation  class of the material is 3334 (software services). I was thinking In OBYC, under GBB key, this combination of my val. grping code+ 3334 + VKA and relevant GLs shud exist.
    But in my development client, i dont get any error for the same material. And in thr also, thr is no mention of entry like above combination in OBYC. So its making me think that its not config error. But its an issue of master data or GL data.
    Please help me . This is critical.
    -Prashant

    Hi,
    Your observation is perfectly write, the possible errors are
    1.  Check the combination of Account modifier of Purchase order account assignmnet or PR.  Based on the modifier and check the relevent combination in OBYC
    Valuation ClassAccount ModifierIf Groups is there + Transaction Event Key + Gl Accounts
    2.  If GL Account is available then check the GL Master through FS00 for validation of mandatory consumption is required and i feel there is no issue with material master.
    Rewards if it helps
    Regards
    Goutham

  • Why I can't sync firefox after using "restart with Addons disabled"? Why It's showing account not found?

    I'm using firefox sync with multiple desktop and laptop, even with Linux and windows environments since long, without any problem. Recently, I've used "Restart with addons disabled" option. Since then I can't setup sync. It's showing account or usename not matching!!! When I've tried to reset the password then It's showing account not found!!! But I've checked several times about username and password. Interesting on my laptop Firefox sync works perfectly, without any issue.
    I really need to solve this issue ASAP. I really , really want to continue using Firfox.
    Please help. Thanks in advance.

    Is there still a name and password and Sync key saved in the Password Manager?
    You can find the sync account password and the sync (recovery) key in the password manager on computers where a sync account with a specific e-mail address has been set up.
    *Firefox/Tools > Security: Passwords: "Saved Passwords" > "Show Passwords"
    Look for:
    * chrome://weave (Mozilla Services Password)
    * chrome://weave (Mozilla Services Encryption Passphrase)
    You can try to remove all services.sync lines from the prefs.js file in the Firefox profile folder and possibly delete or rename the Weave folder.
    *Help > Troubleshooting Information > Profile Directory: Show Folder (Linux: Open Directory; Mac: Show in Finder)

  • Error "Account not found" in Catalog

    Hi All!
    I have a problem with the catalog of OBI EE.
    When connecting to multiple users showed the error "Account not found".
    I've located the "Catalog Manager" accounts whose permits were <delete Account>. I deleted those accounts and have been fully rebuilt. These accounts are already functioning.
    But to connect to the "Presentation" with the manager and access the option "Manage users and groups" by clicking the link "Show users and groups," again gives the error "Account not found". The log shows:
    An error occurred during execution of "connect". No connection could be made Actively Because the target machine refused it.
    [Socket: 868]
    Type: Error
    Severity: 42
    Time: Mon Oct 26 13:31:01 2009
    File: project / WebSecurity / securitymanager.cpp Line: 84
    Properties: ThreadID-6808; HttpCommand-getAccounts; remoteIp-10.12.127.129; User-Administrator
    Location:
    saw.httpserver.request
    saw.rpc.server.responder
    saw.rpc.server
    saw.rpc.server.handleConnection
    saw.rpc.server.dispatch
    saw.threadPool
    saw.threads
    Account not found.
    Any ideas?
    Regards.

    When you log in into presentation services as administrator, you can still see these users in the user list? You have to delete them not only via the catalog manager, but also overthere.
    And restart your services once...
    Hope it helps.
    Kr,
    A

  • Accounts not found in Application ICMatching

    What accounts I need to give in ICBOOKING busiess Rulu:
    Parent Matching Account ,Type, Other Destination Dimension, Booking Destination Data Source, Maxbooking amout, Debit Account, Debit Flow, Debit Intco, Credit account, Credit flow, Credit IntCo
    Please guide me what I need to fill the accounts in business rulses:
    When I run the ICBooking Pakage its showing the Error: Accounts not found in Application ICMatching.
    Regards,
    GURU

    Hi Guru,
    Please have a look at the below link from help.sap:
    http://help.sap.com/saphelp_bpc75/helpdata/en/b4/918ba15cd3499b9d763bb45d5a29de/content.htm
    Even though its from BPC MS, the tables fields are almost the same. You will get the information about each of the fields.
    Hope this helps.

  • Idoc Failure due to APO substitute part number

    Hi
    Scenario: Intercompany p.o for a part. Plant in newzeland buy from Singapore.
    In Sales Order and Delivery system proposes a substitute part number against P.O
    So when delivery is created the idoc failed due to the discrepancy of P.O and S.O partnumber (susbstitute in S.O). In S.O Reason for Material Substutution: Softpart Roll (APO): 9912
    Actual entered in P.O and substitute in S.O/D.O are enabled in both plants and material X plant status is C5 (New Product).
    P.O status - Invoice recieved but Not yet GR.
    SO Status - Delivery, Pick, PGI completed
    Can any one advise how to clear the failed idocs and understand the root cause.
    regards
    RG.

    Hi
    It may be a not decent solution and long term.
    As interim solution, once the substitute part arrived the recieving store at the buying instance, change the part number accordingly in the P.O (delete the old part number and add the new part number, and delete the output type to prevent any Idoc flow for the same order again.) and save it.
    Now the GR can be performed.
    regards
    GJ

  • G/L texts in chart of accounts not visible in Tcode FS00

    HI Experts,
    I am not abel to see the tab "G/L texts in chart of accounts" (secod last tab) in Tcode FS00 in one of our ECC6.0 system.
    How can i activate those fields.
    Thanks
    YG

    Hello Renan
    What you seem to be pointing at is in the information tab of the account. But does that control the field status of the text in G/L account. Because when I had seen this configuration, I was confused with 3 options they had provided and if you do a F1 on the 3 fields you will get description short text.
    That is what is confusing. So If I want to remove say short text from the tab, then what should i do?
    What i believe is that since it is maintained in the screen 2101, we can use a screen exit if possible.
    Rgds

  • Account Not found on resource

    Hi frenz,
    I got the following error when I tried to edit the user A29666.
    Account 'A29666' not found in Resource 'SecurID - usatli69'.
    XPRESS exception:
    Can't call method listResourceObjects on class com.waveset.ui.FormUtil ==> com.waveset.util.WavesetException: SecurId ACE/Server: (listAllObjects) Database connection is not established!
    This has been happening since the past 5 days or more. I am also listing down the reconciliation history for this resource
    Started at 9/12/07 7:00 PM
    Finished at 9/12/07 7:00 PM      Incremental      Error iterating accounts for resource SecurID - usatli69:
    com.waveset.util.WavesetException: SecurId ACE/Server: (getAllObjects) Database connection is not established!
    Started at 9/11/07 7:01 PM
    Finished at 9/11/07 7:01 PM      Incremental      Error iterating accounts for resource SecurID - usatli69:
    com.waveset.util.WavesetException: SecurId ACE/Server: (getAllObjects) Database connection is not established!
    Started at 9/11/07 1:29 AM
    Finished at 9/11/07 1:30 AM      Incremental      Error iterating accounts for resource SecurID - usatli69:
    com.waveset.util.WavesetException: SecurId ACE/Server: (getAllObjects) Database connection is not established!
    Started at 9/10/07 7:00 PM
    Finished at 9/10/07 7:00 PM      Incremental      Error iterating accounts for resource SecurID - usatli69:
    com.waveset.util.WavesetException: SecurId ACE/Server: (getAllObjects) Database connection is not established!
    Started at 9/10/07 3:18 AM
    Finished at 9/10/07 3:19 AM      Incremental      Error iterating accounts for resource SecurID - usatli69:
    com.waveset.util.WavesetException: SecurId ACE/Server: (getAllObjects) Database connection is not established!
    Started at 9/9/07 7:00 PM
    Finished at 9/9/07 7:00 PM      Incremental      Error iterating accounts for resource SecurID - usatli69:
    com.waveset.util.WavesetException: SecurId ACE/Server: (getAllObjects) Database connection is not established!
    Started at 9/8/07 7:00 PM
    Finished at 9/8/07 7:00 PM      Incremental      Error iterating accounts for resource SecurID - usatli69:
    com.waveset.util.WavesetException: SecurId ACE/Server: (getAllObjects) Interprocess communication failed!
    Started at 9/7/07 11:30 PM
    Finished at 9/8/07 1:09 AM      Full      Error while examining user A23691:
    com.waveset.util.WavesetException: Generated account ID 'A23691' on resource 'SecurID - usatli69' is not unique.
    Error while examining user A23709:
    com.waveset.util.WavesetException: Generated account ID 'A23709' on resource 'SecurID - usatli69' is not unique.
    Started at 9/7/07 7:00 PM
    Finished at 9/7/07 7:31 PM      Incremental      Processed 29 accounts.
    Started at 9/6/07 7:00 PM
    Finished at 9/6/07 7:14 PM      Incremental      Processed 34 accounts.
    Started at 9/5/07 7:00 PM
    Finished at 9/5/07 7:14 PM      Incremental      Processed 31 accounts.
    Started at 9/4/07 7:00 PM
    Finished at 9/4/07 7:17 PM      Incremental      Processed 43 accounts.
    Started at 9/3/07 7:00 PM
    Finished at 9/3/07 7:12 PM      Incremental      Processed 6 accounts.
    Started at 9/3/07 4:02 AM
    Finished at 9/3/07 4:14 AM      Incremental      Processed 7 accounts.
    Can anybody tell me what and where exactly the problem lies. I am at sea about this problem, very much clueless about this. Any help in this regard would be appreciated.
    Thanks and Regards ,
    Zebra8

    Ok,
    If you are able to ping means resource is reachable now from my old experience there may be the problem because of the adminId and password that u r using to connect get expire.
    Do one thing go to the IDM admin interface edit the resource and go to the resource parameter form of resource and click on the test connection button. If it gives the error then contact to your resource administrator and check that id and password are sill valid.
    Thanx
    Shant

  • Copy Express Item Groups Transaction revenue Account not Found

    Currently using Copy Express.
    1.  Have successfully loaded COA
    2. Manually entered G/L account determinaition and tax codes
    3. Error below is occuring when trying to Copy Item Groups and Warehouses.  The items groups and Warehosues are failing.
    Transaction created by document was not found, 'Revenue account'.
    NOTE: the accounts determined for each item group in the source database all exist in the target database.
    Can any please assist in explaining why this is happening and how I could prevent this from occuring without having to mannually create warehosues and items?
    Thanks Very much
    Lisa

    Hi Lisa,
    I have a suggestion.
    The Revenue account in question may be problematic.                                                                               
    Can you try to change to another revenue account in your source db, and try to copy warehouse to target DB?                                                                               
    1.goto source db,and search for the specific warehouse and change the         
      revenue account to another account
    2.and copy warehouse to target db 
    Hope this will be helpful.
    Kind regards,
    Willy

  • Error 131-46 GL account not found

    HI Expets
    I had to post a AR invoice using a delivery note. After creating the AR invoice when i tried to add it, it gave me a warning that the customers credit limit is already passed and asked do you want to continue. after selecting yes it gave me a error saying GL account not defined [131-46], can any one tell me why this happens.
    thanks
    bernard

    Hi Bernard..........
    First of all I welcome you to SAP Business One Forum.
    Regarding your problem I think you have set the credit limit on BP Master level so if its credit limit is exceeded then it gives such type of warning.
    Please check do you have defined the GL accounts (Sales Account, Rounding Account, Discount, AR Down payment, Stock Account, COGS, Tax Accounts, Freight Account)
    Check all those account in GL Account Determination, Warehouse and on Item Group Level (As per your set GL method wise)
    Hope this will solve your problem......
    Regards,
    Rahul

  • Idoc failure due to movement type

    Hello,
    I am going through one process in whih i am recieving idoc from another system into SAP and this idoc will result in doing GR automatically.
    This time IDoc is getting failed and system showing error that Update control of movement type is incorrect (entry 101 X X _ L )
    What can be reason for this as i am using movment type 101.
    Thanks
    Himanshu

    Hi!
    Is it possible to copy here the contents of your idoc? specially the item data... something like:
    Segment Type - E1BP2017_GM_ITEM_CREATE
    MATERIAL AAA
    PLANT 1000
    STGE_LOC 0001
    MOVE_TYPE 101
    ENTRY_QNT 1
    ENTRY_UOM EA
    MVT_IND B
    Please, let me also know the idoc type you are using.
    Thanks!
    Esther.

  • IDOC Failure due to warning message

    Dear Members,
    When we pass data from MDM to ECC through XI, most of the times the IDOC fails, the reason we found out is the warning message that we get when we create vendor manually from XK, FK transaction codes.
    Warning message that we get in XK & FX transaction codes are :
    EX: Are you sure you want to map the following customer to the vendor.
    Because of above warning message the IDOC's are failing.
    As we cannot disable those messages, can we do anything else; mostly at IDOC side to avoid those warnings and to successfully post the IDOC.
    Cheers,
    Cherry.

    Hi Chen,
    The message I get at IDOC
    Status 68 :  Error No further processing  &
    Status 51 : Application document not posted.
    WARNING message which I get under XK03 transaction --> change, when I try to modify the customer is:
    Customer xxxxxxx is currently not referenced and will be updated accordingly
    Other details
    Message no. F2293
    Application Area f2
    Message number 293
    Main program  SAPMF02K
    Include MF02KI00
    Cheers,
    Cherry.

  • Regarding Getting Error in Idoc .... Outbound table not found

    Hello everyone
    I am working on ALE/Idoc, at the last i am getting error that idoc has created but cannot be send, I am using XML port (not file) so giving Physical Dictionary, please solve my problem where i have to change. please reply its urgent.
    Thanks & Regards
    Vimarsh B.

    Dear,
    The addon is a third party addon which was developed by CitiXSys. so the support is provided by the partner who developed the addon.
    Go to the vendor Citixys for further support will give you a quick reply.
    Regards
    Apple

  • Contract account not found and replicated to ISU

    Hi Experts,
    Our users created s3 contract account in the Production system. But upon searching for 2 of them
    they are not able to find these two contract accounts in CRM as well on ISU side.I have also checked the queues and Bdocs if any one of them got failed but I am not able to find those as well.
    Can any one guide what can be done to find them and replicate the same to ISU.
    Regards,
    Manish
    Edited by: manish.dodeja on Jun 25, 2009 11:11 AM

    Hi Haresh,
    Check with middleware settings there must be something left out like in T.Code SMOEAC (Check Publication and Subscription) Business Agreement should be there..
    Check T.Code: CRM_BUT_CALL_FUN
    Depending on the business agreement class, the contract account templates are stored in SAP ERP
    in table TFK_BUAG_REF.
    You can find this table in Customizing for
    Financial Accounting under Contract Accounts Receivable and Payable->  Integration->Customer Relationship Management-> Business Agreement ->Determine Template for Contract Account for Replication
    Use FI-CA event 1023 to determine whether the busines agreement should be selected as a standard business agreement when it is downloaded. You can check the contract accounts of the business partner and decide whether you want to select the checkbox.
    Also check FI-CA event 1022 (see tables TFKFBM,TFKFBS, and TFKFBC in SAP ERP).
    Let me know if your issue is resolved
    Regards
    Ripunjay

  • MIRO error F5507 for GL Account not found

    When executing MIRO I am getting error " G/L account XXXXXX not defined in COA XXXX' (message # F5507) in ECC 6.0.
    We are migrating from 4.6B to ECC 6.0 and this account does not exist in 4.6B too for COA, but it works fine in 4.6B. The concerned account is in COA "INT" which has no relevance for the business.
    Company Code is already set to relevant Company code while executing MIRO.
    Thanks.

    Hello,
    In OBMSG you need to ADD.
    Go to OBMSG
    Select F5 application area
    Click on message
    New Entries
    Application Area F5
    Message No.507
    Allowed: I (Information)
    Standard: E (Error)
    Check: Switch off box
    Now if you come to OBA5, you will see the message appearing in OBA5
    Switch off the message in OBA5 for online and batch entries.
    Regards,
    Ravi

Maybe you are looking for