Urgent & Important: Changing Host Name..Help!

Hello,
At the time of installing BPEL , the hostname of my pc was 01hw060433. Now this has changed to 01hw060526.
This creates error while testing my newly deployed BPEL process as it still refers to the old name.
This is the error message:
Failed to read wsdl file at: "http://01hw060433:8888/orabpel/default/syncHelloWorld/v2009_01_30__53840/syncHelloWorld?wsdl", caused by: java.net.UnknownHostException. : 01hw060433
Can you please let me know where this can be changed so that the revised host name is considered?
Regards,
Gayatri

Login to BPEL admin and go to the configuration. I forget which fileds to chnage but there are three. Fairly easy to tell which ones as it has the olds host name.
If using 10.1.3.4 there is no BPELadmin the configuration screen is in the BPELConsole left hand tab.
You may also need to change configuration on in em. To do this login from the machine where SOA Installed. but use the URL http://localhost:8888/em. There should be a link down the bottom, could be in the same link as the ports?
If that fails edit the httpd.conf and change any reference to the old environment.
$SOA_HOME/Apache/Apache/conf
cheers
James

Similar Messages

How to change host name and domain name in installed Cisco Meeting Place Express 2.0?

Hi
I have Cisco Meeting Place Express 2.0 installed on server. Meting Place uses Linux (Red Hat) as base operation system. Please tell me how I can change host name and domain name for Meeting Place Express application to integrate it into corporate domain infrastructure.
Thanks in advance!!!
Sincerely yours
Sergey Bondarenko

Hi
Thanks for your attention for my humble problem.
I have performed Meeting Place Express configuration through the “net” command.
But now unfortunately I can't connect to meeting place through web browser. I just get blank page.
Though I can reach the server with help of ssh. I think my DNS works properly because I can resolve the ip address of cumpxvoice .uclab.com and cumpxweb. uclab.com with help of dig command.
Have you any idea?
A lot of thanks in advance!!
Sincerely yours Sergey Bondarenko
Here I have printed the net configuration output of Cisco meeting Place Express:
[root@cumpxvoice root]# net
This is the MeetingPlace Express network configuration utility.
Up to the point where you save changes, it is safe to hit ^C to get
out at any time, in which case nothing will have changed.
1) List current configuration
2) Configure Ethernet port 1
3) Configure Ethernet port 2
4) Configure service bindings
5) Set host names
6) Set domain name
7) Configure DNS service
8) Configure NTP service
9) Configure routing
10) Done
Select: 1
Primary/audio host name: cumpxvoice
HTTP host name:          cumpxvoice
RTMP host name:          cumpxweb
Domain name:             uclab.com
Service bindings:
Audio:                   port 1 (eth0)
Web browsing (HTTP):     port 1 (eth0)
Web conferencing (RTMP): port 2 (eth1)
Port 1 (device eth0):
IP Address:      10.62.60.116
Network mask:    255.255.255.0
Default gateway: 10.62.60.1
Link setting:    autoneg on
Port 2 (device eth1):
IP Address:      10.62.60.117
Network mask:    255.255.255.0
Default gateway: 10.62.60.1
Link setting:    autoneg on
Static routes:
Destination      Gateway          Network mask     Port
0.0.0.0          10.62.60.1       0.0.0.0          1
DNS Servers:
10.62.60.115
10.0.1.4

Changing Host Name in OCS 10.1.2

I have Installed OCS 10.1.2 on RedHat Linux AS 4.5 (x86) on HP-Proliant DL 180 G5 Server.
I want to configure Apache Server in OCS to launch a web site.
Can anybody guide me with the Apache Configuration,
I have tried but as my site name and Host Name are same i am unable to do it -
Is it possible to change the HOSTNAME on OCS ?
Some guidence on this issue will help me to proceed else i will have to re-install OCS.

Do changing host name effect in google PR update ?

HOW TO CHANGE HOST NAME AFTER SAP IS INSTALLED?

i have installed ecc6 in my computer.But after installation is completed i want to change my computer(system) name.If i change the computer name is there any problem occur.May i change computer name after installation also.

As far as my understanding goes it can be done. The only problem is SAP is not recommending it. Still if you want to give it a shot please go through the link to learn more and step by step guidance.
[Click Here|http://www.saptechies.com/changing-host-name-on-r3-host-what-do-you-do/]
Also take a look at this SDN thread, you might find something interesting.
[click here for SDN thread|How to change the hostname was set/defined in SAP system?;
Edited by: santra.anirban on Sep 13, 2010 10:45 AM

How to change host name or host ip in AIA after installation

Hi,
we have AIA11.1.1.5.0 and O2C PIP installed.
we need to change host name used in AIA to some different value.
Could you please suggest what all steps are required for this.
Thanks & Regards,
Bob

1) Make a full backup of your XI 3.1 system (both database and file repository)
2) Change the hostname
3) Create a new SIA with all defaults servers using the CCM. Make sure that you instruct the CMS to use the same database connection as before. I ould advise you to change the default CMS and SIA ports.
4) Run the "Update objects" command in the CCM on the new SIA
5) Stop the old SIA and change the ports for the new SIA and the CMS to the default values (if required)
6) Remove the old SIA in the CCM
7) Go into to the CMC and try to delete any remaining servers from the old SIA.
Please note that after completing the above workflow you have to reconfigure some of the servers' settings again in the CMC
Regards,
Stratos

How to change host name for SLD

Hi All,
How is possible to change host name of SLD configuration?
I want to change my portal host name used for SLD configuration from aaa.bbb.net to aaa.ccc.net.
How can i do it?
Thanks a lot!
Alex

Hi,
you can change it in System Landscape directory.
Go to the http:yourportal.com:50000/sld
then click on the Landscape and update the new host name.
Raghu

How to change host name for management agent.

Hi,
I 've installed management agent for oracle, it's a part of Oracle Management Framework, but I have to change host name.
I know how to change port number, but I've no idea how to change host name.
Have you got any idea?
Thank you in advance.
Matin

Hi,
you can change it in System Landscape directory.
Go to the http:yourportal.com:50000/sld
then click on the Landscape and update the new host name.
Raghu

MAY I CHANGE HOST NAME AFTER SAP IS INSTALLED?

i have installed ecc6 in my computer.But after installation is completed i want to change my computer(system) name.If i change the computer name is there any problem occur.May i change computer name after installation also.

Hi,
Do not change the hostname after the installation, if you need to then you have to perform system copy.
Refer: Note 8307 - Changing host name on R/3 host: What do you do?
Regards,
SBK

How to changing host name

how do i changing host name after install. it never asked me for one and now its stuck on unknown.

Recent forum threads have started like this one,
then got completely out-of-focus and derailed.
e.g.
http://forum.sun.com/jive/thread.jspa?threadID=106335 from Sept '06,
which references a thread from Aug '06, with 80+ replies inside it ...
http://forum.sun.com/jive/thread.jspa?threadID=105923
Your Ethernet connection and your system hostname are not going to work,
if you don't have a compatible network adapter.
You won't connect to anything, and the OS can't associate its FQDN,
without hardware that works.
Have you reviewed the HCL, and compared it with your hardware?
http://www.sun.com/bigadmin/hcl/
You may need to install 3rd party drivers for the NIC,
or you may need to buy a replacement card that is compatible.
Boot the system. From a terminal window, as root user, do ...
# ifconfig -a <enter>
Does the output from that command list anything in addition to the virtual loopback adapter?
Copy and paste the complete output back here into the forum thread,
so that others can see what you are seeing.
If the loopback LO0 is all you have, then you're going to have to fix that
before going any further in this discussion.

10.5 server changes host name when changed to be member of 10.4 OD Master

Hi,
I have a Xserve with 10.4.11. This is my working OD master hostname: AAA, FQDN: AAA.domain, realm DOMAIN. Now I have a PowerMac G5, hostname BBB, FQDN BBB.domain, where I install 10.5 server.
When it comes up as stand alone, the hostname is BBB (FQDN BBB.domain), but when I then connect it (as domain member) to my OD master, it promts me to say that "AAA" is a used hostname and that it changes hostname to" AAA (2)".
In my DNS it is still identified as BBB.domain, and it is bind to the realm as BBB.
Why does it act like this?
Subsequently I can't get kerberos to work and SMB does not want to be a member of the domain (always get back to standalone instead of becoming member of the domain).

Here comes a bit more on this one. I waited and maybe this had to do with having a OD master in Tiger and the OD member on Leopard. But now both are in Leopard. And things are the same.
I have thou been studying the Console after some tips. And I'm changing the host name in Server Admin/Network to BBB (what it should be). And it seems to work fine. Name of the server changes where supposed to (what I can see). And in Console I can se that the administration tool changes host name in a variety of places.
And now I wait.
If I do nothing (the network is pretty small), nothing happens. But after a while, I login with for example Remote desktop the followingapears in Console:
+Jan 3 12:58:02 emil mDNSResponder[30]: User updated Computer Name from AAA (2) to AAA+
+Jan 3 12:58:02 emil mDNSResponder[30]: afpovertcp.tcp. service renamed from "AAA (2)" to "AAA"+
+Jan 3 12:58:02 emil mDNSResponder[30]: ssh.tcp. service renamed from "AAA (2)" to "AAA"+
+Jan 3 12:58:02 emil mDNSResponder[30]: sftp-ssh.tcp. service renamed from "AAA (2)" to "AAA"+
+Jan 3 12:58:02 emil mDNSResponder[30]: servermgr.tcp. service renamed from "AAA (2)" to "AAA"+
+Jan 3 12:58:02 emil mDNSResponder[30]: rfb.tcp. service renamed from "AAA (2)" to "AAA"+
+Jan 3 12:58:02 emil mDNSResponder[30]: ldap.tcp. service renamed from "AAA (2)" to "AAA"+
+Jan 3 12:58:02 emil mDNSResponder[30]: net-assistant.udp. service renamed from "AAA (2)" to "AAA"+
+Jan 3 12:58:02 emil mDNSResponder[30]: adisk.tcp. service renamed from "AAA (2)" to "AAA"+
+Jan 3 12:58:02 emil mDNSResponder[30]: User updated Local Hostname from AAA-2 to AAA+
+Jan 3 12:58:03 emil mDNSResponder[30]: Local Hostname AAA.local already in use; will try AAA-2.local instead+
+Jan 3 12:58:03 emil mDNSResponder[30]: afpovertcp.tcp. service renamed from "AAA" to "AAA (2)"+
+Jan 3 12:58:03 emil mDNSResponder[30]: ssh.tcp. service renamed from "AAA" to "AAA (2)"+
+Jan 3 12:58:03 emil mDNSResponder[30]: sftp-ssh.tcp. service renamed from "AAA" to "AAA (2)"+
+Jan 3 12:58:03 emil mDNSResponder[30]: servermgr.tcp. service renamed from "AAA" to "AAA (2)"+
+Jan 3 12:58:03 emil mDNSResponder[30]: rfb.tcp. service renamed from "AAA" to "AAA (2)"+
+Jan 3 12:58:03 emil mDNSResponder[30]: ldap.tcp. service renamed from "AAA" to "AAA (2)"+
+Jan 3 12:58:03 emil mDNSResponder[30]: net-assistant.udp. service renamed from "AAA" to "AAA (2)"+
+Jan 3 12:58:03 emil mDNSResponder[30]: adisk.tcp. service renamed from "AAA" to "AAA (2)"+
+Jan 3 12:58:03 emil mDNSResponder[30]: User updated Computer Name from AAA to AAA (2)+
+Jan 3 12:58:03 emil mDNSResponder[30]: User updated Local Hostname from AAA to AAA-2+
+Jan 3 12:58:03 emil mDNSResponder[30]: mDNS_SetFQDN - hostname unchanged+
"AAA (2) to AAA" may as well be "BBB to AAA". But I'm very surprised over that the logg claims that "User updated Computer name..." For all I know, I haven't. And note in the middle here that the mDNSResponder changes to AAA (which indeed is used - it's the OD master!!!), discovers that the name is in use, and then changes to "AAA (2)".
But why does it at all initiate a change from AAA to "AAA (2)"?
Why can't I call the server BBB?

Changing host name of JDI server

Hi,
during installation of JDI I used ip-addresses as host names for defining the domain host, the SLD server in domain definition, the dtr server URL in track definition, the CBS server URL in track definition.
I know that one shouldn´t use ip-addresses at all but we did have some trouble with the network infrastructure (DNS-Server, ...) at the beginning and the start of the project couldn´t be delayed.
Now, for any reason, the network department gave our server a new ip-address.
I then opened the CMS configuration tool and tried to change the host names (this time not to ip-addresses because DNS-Server works properly in the meantime).
Changing domain data is no problem. But when I try to save the changes of my track(s) I get an error message that says I should contact my administrator. I am the administrator
My Questions:
How is it possible to change the host names of JDI tracks?
What is to do at client side? There are already some developers working with the dev. configurations. Is it sufficient to change the according entries in the .confdef file or do the clients have to donwload the new dev. configuration from CMS host?
Thanks in advance
Helmut

Hello Helmut,
it should be possible to change the host names for tracks. You can get more error message details in the trace file of the Engine. To do so connect to your engine with the J2EE Administration Tool and check the defaultTrace.trc File in the Log Viewer.
For more details how to find this trace information have look into the Change Management Server Problem Analysis Scenarios (Link: http://help.sap.com/saphelp_nw04/helpdata/en/81/4bce4016d28031e10000000a1550b0/frameset.htm). In the first Scenario Incorrect Initial CMS Configuration you can also find the general information how to read and find the CMS trace files.
Please open a CSN message for the component BS-CTS-CMS if can not find the reason for the error message or if it is real problem in CMS.
Best Regards, Michael

Changing host name of server running SpiceWorks

I installed SpiceWorks Help Desk for a customer as a test for him to see if it would meet his needs. I installed it onto a server that was due to be commissioned for something else, and has been named accordingly.
In DNS, I created a CNAME of helpdesk which pointed to this server.
My customer has told everyone that the system is live, and they have started using it (by it's CNAME)
So my question is, can I safely rename the host from it's existing name to HELPDESK without any repercussions?
This topic first appeared in the Spiceworks Community

Hello Helmut,
it should be possible to change the host names for tracks. You can get more error message details in the trace file of the Engine. To do so connect to your engine with the J2EE Administration Tool and check the defaultTrace.trc File in the Log Viewer.
For more details how to find this trace information have look into the Change Management Server Problem Analysis Scenarios (Link: http://help.sap.com/saphelp_nw04/helpdata/en/81/4bce4016d28031e10000000a1550b0/frameset.htm). In the first Scenario Incorrect Initial CMS Configuration you can also find the general information how to read and find the CMS trace files.
Please open a CSN message for the component BS-CTS-CMS if can not find the reason for the error message or if it is real problem in CMS.
Best Regards, Michael

How to change HOST Name without a reinstall in XI 3.1 ?

Is it possible to change the host name in XI 3.1 without reinstall ?

1) Make a full backup of your XI 3.1 system (both database and file repository)
2) Change the hostname
3) Create a new SIA with all defaults servers using the CCM. Make sure that you instruct the CMS to use the same database connection as before. I ould advise you to change the default CMS and SIA ports.
4) Run the "Update objects" command in the CCM on the new SIA
5) Stop the old SIA and change the ports for the new SIA and the CMS to the default values (if required)
6) Remove the old SIA in the CCM
7) Go into to the CMC and try to delete any remaining servers from the old SIA.
Please note that after completing the above workflow you have to reconfigure some of the servers' settings again in the CMC
Regards,
Stratos

Changing host name of OID repository... Where do I need to make changes?

We are moving our OID metadata repository to a different host and Im curious where I need to make the modifications in our OID installation to accommodate the new host name.
Things we have already done:
1) Modified and pushed out the new tnsnames.ora file.
2) ODM -> Entry Management -> Oracle Context Made changes to a) orclnetdescstring b) cn=OID -> cn=Description_0 -> cn=Address_List_0 -> cn=Address_0 -> orclnetaddressstring
3) Updated the %ORACLE_HOME%\OraHome\sysman\emd\targets.xml
After these changes were made, completed rebooted the system. OID seems to be working, however if I open a command prompt and 'tnsping OID' I still get the old host name, however if I fully qualify it, 'tnsping OID.xxx.local' it finds the correct host name....
Am I missing an update somewhere that causes tnsping to not find the correct host for the repository? Can I update the current repository registration via oracle tool?
Thanks

If you need to purchase Snow Leopard you can still purchase a copy from Apple's online store's telesales agents.[1-800-MY-APPLE (1-800-692-7753) or Customer Service and Sales Support at 1-800-676-2775.] Ask for a Sales Representative.
Third-party sources for Snow Leopard are:
Snow Leopard from Amazon.com
Snow Leopard from eBay
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store.

Changing HOST Name in Oracle 10G AS

Hi,
I am using "Oracle 10g Application Server". I have installed oracle 10G AS in Windows 2003 Server(32-bit) ,2G RAM
Machine is UTI ...Every Thing is Working Fine ..... After the Successful Installation of 10G AS Suddenly i got requirement to the Change host (UTI to UTTI)
so i have changed the host Name to UTTI after that Oracle 10G AS is not Working , i know that every thing is registered with host name as UTI
is it any possible Solution to make it Working Fine
Any Advice on this .
Thanks for Your Valuable Information
SHAN

user609980 wrote:
I am using "Oracle 10g Application Server". I have installed oracle 10G AS in Windows 2003 Server(32-bit) ,2G RAM Good question. One that is appropriate for the App Server forums, not the Database forums.
And answered in the docs.
Which docs? Well, that depends on the VERSION of the app server. Not the BRAND as you specified. (Assuming 10g R2, 10.1.2.x, you would look under App Server 10g R2 docs at http://tahiti.oracle.com, click on the System Management tab, and look at Chapter 8 of the "Oracle Application Server >> Administrator's Guide"

Urgent & Important: Changing Host Name..Help!

Similar Messages

Maybe you are looking for