Urgent information for my Graphics card

I have a GeForce4 MX 4000
Motherboard ID 04/18/2003-KM266-8235-6A6LVM4DC-00
Motherboard Name MSI KM2M Combo (MS-6738)
This has a AGP slot that takes a 4x card. I am having problems sourcing the right card as the few that look as if they will fit are 8x cards
http://www.amazon.co.uk/Sweex-NVIDIA-GeForce-5500-256/dp/B001C9VCXW/ref=sr_1_1?ie=UTF8&s=electronics&qid=1236441783&sr=1-1
The one above is the one I am thinking of buying. I can't see any other descent one around or one with the same connections.
The card has gone it needs replacing and I need an answer ASAP as I need to do some work and without the graphics card I am stuck. So urgent help please if possible
Many thanks
Tony

I have restarted my computer this morning and guess what!! ?? I had changed the to the onboard video and it also has a code 10. I cancelled the order with Amazon now phew, glad that didn't come!! So I still have the same problem. Also I think because the card isn;t working certain software isn't working. Software is crashing. So I think it could be the Motherboard?? What do you think?
Looking forward to your replies
Tony
PS Just done a macrium back up of my system. Just in case.

Similar Messages

Is there an Update Driver for my Graphics card, AMD Radeon HD 6970M 2048 MB , in a 27inch mid 2011 iMac? thank you!

Is there an Update Driver for my Graphics card, AMD Radeon HD 6970M 2048 MB , in a 27inch mid 2011 iMac? thank you!

THank you very much, I I have a ton of Adobe programs on my mac and i think a Cuda driver update was installed with it, it just popped up the other day in my system settings and is asking to upgrade my graphics card, but i don't have the same card as this update... so i thought i would double check! thank you again.

Satellite M60: can not install the newest driver for my graphic card

Can not install newest driver for my graphic card
Satellite M60
ATI MOBILITY RADEON X700

Hello
First of all I really dont understand why you start two topics with the same theme. It is much better to have one topic with good content and interesting comments. Am I right? ;)
Anyway, in your case it is interesting that Toshiba use adapted drivers because of hardware protection. That means that graphic card will not be forced to run at the maximum level. Hardware cooling in notebooks is very problematic and high temperature can result with overheating or hardware damage. All hardware components are placed on small place. Graphic card produce a lot of warmness and it is not so good for all other hardware.
When you use non-Toshiba driver graphic card will be forced to run faster. Because of that every notebook manufacturers dont support usage of third part drivers. The fact is that hardware protection is priority.
I didnt make any experiments but according to some reports on this forum there is way how to install non-Toshiba graphic card driver.
Please check this forum and you will find many comments about that. One interesting topic is http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=18063&messageID=66186

Unique interrupt for AGP graphic card

I'm not able to set unique interrupt for AGP graphic card (nVidia GeForce4/440) on MB MSI645 Ultra (MS-6547). I'm afraid this is reason, why my system W2000 hanging up eg. when I'm watching DivX movie (monitor, mouse a and keyboard freeze and sound going on). In the best case I'm sharing interrupt only with USB but mostly also with other devices as sound card etc. Asignment of interrupts ti PCI slots in BIOS don't help me.

When ACPI is enabled windows will place many devices on a single virtual IRQ, this is normal.
I have on IRQ11:
SB Live! 5.1
ADSL PCI modem
2xNEC USB2.0
2xVIA USB1.1
56K PCI modem
GF4 Ti
Realtek 8139 10/100 NIC
All is working well.
For you I suggest you install the SiS chipset drivers and then try using the nVIDIA 28.32 VGA drivers.

Problems with BIOS for new graphics card!!! HEEELP!!!!

Hello,I just recently received my new graphics card (Gigabyte GeForce GTX 960), and I am having some troubles getting it to work with my computer (p7-1072sc). I go myself a new PSU (Crossair CX600M), istalled it properly, pluged all the components up and put in the new GPU. Every time I turn on the PC, it freezes at the blue HP loading screen and does not respond to any keys.After some google searching I found out that I most likley would have to update my BIOS, so I went to the HP homepage. Entered my modelnumber, downloaded the new BIOS update (My current version was 7.14 13.10.2011), the update said the version was 7.15 05.25.2013. I downloaded the exe file, closed all other programs and ran the file. I started out as normal, but as the main installationprocess started I got the message that hpprobar3 stoped working. The computer freezed for a short while and then I got the message that the new BIOS had bin successfully installed, so I restarted the comuter. After that I checked back on the systems information and the version had bin changed to 7.15, but the date was still 13.10.2011. I tried the same rpocess again and the same thing happened. I ried again to put in the new GPU, and it still froze on the blue HP loading screen. I also tried to find the directory for the BIOS file (sp55548.exe) (to make a flash installation), under c:/swsetup, but I only found one folder named sp68021. Can anyone help me with this?? I would really appreciate any advice sort of advice!!!
PS: I am pretty new to all this stuff, so please be patient and explain any technical informoation or terms.

As stated before, and as a refresher. I just got off the line with MSI and EVGA. What you have is a Legacy motherboard. It can not function with a UEFI BIOS graphic card. That said:MSI (Greg): The 750Ti NF has a switch for Legacy/UEFI. All others in the 700 series are UEFI. The 900 series, plus the R7, R9 ship with the new VBIOS, a hybrid that detects the correct BIOS (Legacy/UEFI). EVGA (Kayon): All 600 and 700 except the 750Ti are Legacy.

Urgent Help Needed: ATI Graphics Card install

Hello All.... I am in need of some urgent help..
I am trying to install a new graphics card - the ATI Radeon 9600 SE. I currently have a Voodoo3 card. I followed all of the instructions step by step, but when I plug the monitor to the Radeon card and boot up, I do not get any display. I have tried everything I can think of, and yet - I am sure the card is secured in place and the monitor is plug into the card.
Can anyone help me on this one.. ATI's support is, well - lacking..
Here is some info on my pc:
MCI motherboard
AMD Athlon(tm) XP 2000+ 1.7 GHz
768 MB
AMIINT - 10 Version 1.00, 07/10/02
Could the problem be with switching from a regular PCI card to an AGP card???

Quote
Originally posted by southmike
okay i'll bite what are omega drivers,
how are they different from cat4.2 drivers
i was suprised that the voodoo 3 would work in a AMD64 mobo...
whoops....just read the rest of the post :lol:
BTW is there an external power connector that needs to be plugged in?

Need Help with power supply reccomendations for my graphics card

hi
i have a MSI GeForce GTX 780 Graphics card... i built my own system, i also got a rosewill rx750 power supply in it which i think is causing me problems, the computer works great until i get into games like titan fall and try and get into a game then it restarts the computer on its own.. has done this with a few games, but it works fine when surfing the net and so forth, i have read its to do with the power supply being week and also read my chosen power supply isnt that good... anyone got any recommendations for me that i should look at or am i looking in the wrong direction with whats wrong with my pc... any help would be great thanks

yes the PSU is the most important choice out there and corsair and seasonic are the best out there! (never buy cheap PSU's as like abvolt said a cheap one can easily kill your more expensive parts)
Cheap PSU = made of the most cheap parts they could get "think cheap shanghai parts are used that may be of any quality good or awful as its just what they could get for the lowest price" (ever bought anything that was super cheap they break very easily)
Quality PSU = the use of good quality well made parts and will have very good testing done on them to make sure they are stable and pass very tight regulations and conform to specs for 10-30 different factors each.
a cheap low quality PSU I class as a paper weight as it will never go near a computer (maybe i would use one as a basic bench PSU for things i do not care if they die or just for testing a fan or something that rubbish dirty power is not really a major problem but silicon is not tolerant to dirty power and will kill parts)

Do I need a driver for my graphics card in Pr CC?

I am currently on a Mac Pro 3Hz, 8-core (2008) with 16G ram and an ATI Radeon 5780 Graphics card.
My render setting is set to "GPU".
It has actually SLOWED everything down!
What should my settings be?
Thanks!
Valerie

doublevee wrote:
I am currently on a Mac Pro 3Hz, 8-core (2008) with 16G ram and an ATI Radeon 5780 Graphics card.
My render setting is set to "GPU".
It has actually SLOWED everything down!
What should my settings be?
There are no drivers for you to install; they're included with OS X. What version of the operating system are you running?

A55M-P33 and support for non-graphics cards in PCI-e x16 slot.

Does this motherboard support using an LSI raid card in the x16 slot, or does it only support graphics cards? I am building an Unraid box and would like to use the slot for an x4 or x8 raid adapter in IT mode.
Thanks Matt

Well wait around and see if anyone else post's but if you do a quick search of pcie raid controller you will find varying results. All the results I found were with Intel boards though so all I can say is no guarantees.
This is Msi's official response for raid cards:
Quote
PCI-Ex4 RAID cards are designed and tested to work with Server/Workstation mainboards. Therefore MSI does not test server/workstation products with our desktop mainboards.
Please contact the PCI-Ex4 RAID card supplier for compatibility.
You can try to contact msi, but I assume they will tell you this.
>>How to contact MSI.<<
I have also heard some no so hot things about LSI service, I can however vouch for Adaptec's service, so you might want to contact both and see if they have tested and combinations.

Minimum specs for a graphics card.

I just changed over my PE9 to an i7 2600 on a Gigabyte motherboard Z86 UD 3R with 8g ram . 64bit Windows7
The improvement is trully amazing compared with my old Core duo
I am using my 2 year old Radeon HD4350. It plays full HD AVCHD in full screen flawlessly in Windows Media Player.on my 1900x1200 monitor
Everything I shoot is in full HD 1900x1080i 25 frames
Preview is perfectly smooth when rendered. No crashes yet!
Preview of clip areas with red lines is mostly OK but a bit jerky at times. If I pause and restart preview it fixes the jerk
My question is would there be any improvement in previewing smoothness of unrendered material if I went to a faster graphics card?.
How does one tell if one needs a faster card?

I agree with Neale. When using PrE, the biggest requirement for a video card will be the updated drivers. So long as ATI/AMD supports the card, and issues new drivers for it constantly, a newer, faster video card will not provide much of an improvement with the exception of the very few GPU Effects.
Now, with PrPro, as of CS 5, things are greatly different, in that with certain nVidia cards, much processing is handed off to the GPU through the Mercury Playback Engine (MPE) and the card's CUDA function. MPE has not made its way into PrE yet.
With most HD material, the biggest BFTB ("Bang For the Buck") is upgrading the CPU, such as you did. Next and in about a tie, will be RAM (with a 64-bit OS and 64-bit program) and additional HDD's.
Good luck,
Hunt

Need Xorg config file for dual graphics cards, triple monitors

Hey guys, I'm having a bit of trouble getting triple monitors working on my system. The two plugged into the graphics card (radeon x300) work fine, but the one plugged into onboard graphics (geforce 6150SE) refuses to appear in xrandr. I figure I need to make a /etc/X11/xorg.conf.d/10-monitor.conf file but I'm confused about how to do it with separate cards. I find the wiki instructions that I can find confusing, as I've never had to deal with xorg files before (has always autoconfigured for me no problems).
Relevant code:
[greg@spacebar ~]$ lspci | grep VGA
00:0d.0 VGA compatible controller: nVidia Corporation C61 [GeForce 6150SE nForce 430] (rev a2)
02:00.0 VGA compatible controller: ATI Technologies Inc RV370 5B60 [Radeon X300 (PCIE)]
[greg@spacebar ~]$ xrandr
Screen 0: minimum 320 x 200, current 2960 x 1050, maximum 4096 x 4096
VGA-0 connected 1280x1024+1680+0 (normal left inverted right x axis y axis) 338mm x 270mm
1280x1024 60.0*+ 75.0
1152x864 75.0
1024x768 75.1 60.0
800x600 75.0 60.3
640x480 75.0 60.0
720x400 70.1
DVI-0 connected 1680x1050+0+0 (normal left inverted right x axis y axis) 430mm x 270mm
1680x1050 59.9*+
1280x1024 75.0 60.0
1152x864 75.0
1024x768 75.1 60.0
800x600 75.0 60.3
640x480 75.0 60.0
720x400 70.1
S-video disconnected (normal left inverted right x axis y axis)
[greg@spacebar ~]$ pacman -Q | grep xf86-video
xf86-video-ati 6.14.3-1
xf86-video-nouveau 0.0.16_git20120106-1
xf86-video-vesa 2.3.0-7
[greg@spacebar ~]$ cat /etc/mkinitcpio.conf | grep MODULES=
MODULES="radeon nouveau"
I just can't seem to understand how to write the 10-monitor.conf file. I was wondering if anyone could give me a hand?
Also, the third monitor to be connected via onboard VGA is also 1280x1024 and will be left of the other two.

Depends on the motherboard. This one allows you to enable the onboard graphics only when no external card is found, or always enable. The PCI-E card initialises first, if that helps.
EDIT: Also I can confirm that it can run both cards (all three monitors) at the same time by switching to initialise the onboard card first, however that makes some weird stuff happen so I switched it back. And also the nouveau driver is shown in lsmod, and gets detected in the boot message logs.
Last edited by MisterAnderson (2012-01-26 16:56:58)

Looking for Macbook Graphics Card Upgrade

Hey,
I recently saw a Graphics Card Upgrade Kit for a Macbook Pro and was wondering if Apple offers a Graphics Card Upgrade Kit for a Macbook.
Thanks,
Nevin
[email protected]

Welcome to the discsussions!
The graphics chipset is integrated into the logic board and cannot be replaced or upgraded.
Are you sure you saw one for the MacBook Pro and not the Mac Pro desktop tower?

PP CS6 doesn't recognize my Quadro FX 4800 for Mac graphics card but my trial PP CC does. When I open CS6 the Mercury Playback engine is grayed out. In PP CC the Mercury Playback engine is not Grayed out. I have the latest Nvidia driver & Cuda driver. Do

I installed PP CS6 on a Mac OS 10.10.2, installed latest drivers for Nvidia Quadro FX 4800 graphic card including Cuda driver. The Mercury Playback Engine is grayed out. But when I open an installed trial version of PP CC the Mercury Playback engine is not grayed out. Do I have a problem with CS6 software?? Thanks for any input you can offer.

If your nVidia card has at least 1Gig of video ram, use the nVidia Hack http://forums.adobe.com/thread/629557 - which is a simple entry in a "supported cards" file - and Mac http://www.vidmuze.com/how-to-enable-gpu-cuda-in-adobe-cs6-for-mac/

FAQ for supported Graphics Cards?

Hi all, I have a question about my old MacPro.
Version 1,1 currently running 10.5.6 and an Nvidia FX4500.
My boss just dropped an FX 4800 on my desk, but doubt it'll work. Had the same issue with an FX5600 about 6 months ago.
Is there a list of supported graphics cards for each model?
TIA.

Apple does not have the 8800GT, and it has not for months for 1st gen Mac Pro owners like us.
Your best upgrade is ATI 3870 or 4870.
I wish there were real FAQs and stickies.
http://www.apple.com/support/macpro/
But you would hope the "What other users are discussing" would be from the MACPRO AD, but based on current list.... look pretty generic to me; they use to be very AD forum specific, like "Mac Pro" in the past.
* Leopard Server and MacPro Nehalem octo 2.26
* New Mac Pro - XP on 2nd Internal Hard Drive
* Mac Pro as home FTP server
* waking up G4 from sleep thru the network
* How to reset the media directory in Color
* Where are printer driver presets stored?
* Target Disk Mode: I can't access my HD
* Connect to Server does not prompt for username and password
* Time Machine: Can I backup both hard drives in my computer?
* Compatible UPS for Xserves or other Macs running OS X Server?
Those are NOT topics I see coming up as to what WE ask and talk about by a long shot, not here for sure.

Need help for upgrading Graphics Card

Hi, I apologise if I posted this on a wrong place in the forum. Im new here Anyway, this is the current PC that I have (http://h10025.www1.hp.com/ewfrf/wc/document?cc=uk&lc=en&dlc=en&docname=c02991104#N68) and I want to upgrade the graphics card to NVIDIA GeForce GTX680. But I know next to nothing about computers so I would like to ask if the graphics card will work in my computer. Will it fit into the PCI Express x16 slot? And what kind of PSU do I need. And are there any other things that I have to buy in order for the new graphics card to work properly.
Thank You very much for your kind attention
This question was solved.
View Solution.

You would need to post this in the desktop forums, this is the notebook forums.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Urgent information for my Graphics card

Similar Messages

Maybe you are looking for