Urgent!!!!! Inserting data in table control of infotype.

Hi Experts,
I want to insert data in custom infotype.I am using FM HR_INFOTYPE_OPERATION for this purpose.But custom infotype contains a table control.
Table control of infotype has 20 rows containing fields name01 , addr01 upto name20 , addr20.
How do i insert data in table control fields of infotype if i want to use FM HR_INFOTYPE_OPERATION .
Pls suggest if there is another way to do it.
Thanks.

Thanks for your reply.
I am Calling FM HR_INFOTYPE_OPERATION in a loop of a table.
Table contains multiple employee numbers-PERNR.There can be all different PERNR or some records of same PERNR.
Suppose if there are four records in the table.First two records are of the same PERNR.Then how would name01 or name02 will be assigned.
Now, third record is of new PERNR .Again it should be name01.
So the question is how everytime in a loop i will assign nameNN for different PERNR.
nameNN and addrNN was an example. I am sending my code here.
Loop at it_data.
gs_9000-PERNR = it_data-pernr..
gs_9000-currentamount03 = it_data-curramt.
gs_9000-mtdamount03 = it_data-mtd.
gs_9000-qtdamount03 = it_data-qtd.
gs_9000-ytdamount03 = it_data-ytd.
gs_9000-roll12amount03 = it_data-roll.
CALL FUNCTION 'BAPI_EMPLOYEE_ENQUEUE'
EXPORTING
NUMBER = gs_9000-pernr
IMPORTING
RETURN = RETURNE.
CALL FUNCTION 'HR_INFOTYPE_OPERATION'
EXPORTING
INFTY = '9000'
NUMBER = gs_9000-PERNR
VALIDITYBEGIN = '20080801'
RECORD = gs_9000
OPERATION = 'INS'
TCLAS = 'A'
DIALOG_MODE = '0'
IMPORTING
RETURN = RETURN
KEY = KEY.
IF RETURN IS NOT INITIAL.
WRITE :/ 'Error Occurred'.
ENDIF.
CALL FUNCTION 'BAPI_EMPLOYEE_DEQUEUE'
EXPORTING
NUMBER = gs_9000-PERNR
endloop.
So in above code...
gs_9000-currentamount03 = it_data-curramt.
gs_9000-mtdamount03 = it_data-mtd.
gs_9000-qtdamount03 = it_data-qtd.
gs_9000-ytdamount03 = it_data-ytd.
gs_9000-roll12amount03 = it_data-roll.
these are table control fields , so how i wud i assign for
gs_9000-currentamount04 = it_data-curramt.
gs_9000-mtdamount04 = it_data-mtd.
gs_9000-qtdamount04 = it_data-qtd.
gs_9000-ytdamount04 = it_data-ytd.
gs_9000-roll12amount04 = it_data-roll.
in loop of a table.
Thanks

Similar Messages

How to insert data into table control

hi experts,,
i have inserted data into data base table through table control .
now i want to insert data into table control through database table.
how to delete data from table control for selected row

Hi
go through this link.
http://www.****************/Tutorials/ABAP/TableControl/Demo.htm

URGENT-- inserting data through tables.

Hi
I m working on Resume Generator. I have created a Create Resume page. It is working fine, inserting data properly.
However, there is one problem—
While creating the resume one employee can have multiple certificates.
In addition, one employee can have multiple competencies.
So in the create Résumé page I have taken three regions—
One for employee details
Two for certifications
Three for competencies
In certificateRN and CompetencyRN, I have added one item each of style table. In addition, separate controllers for each RN.
Then configured the tables to include “ADD a row” button in both the tables with “Add Competency” and “Add Certificate” label resp.
the code in AddCompetencyCO is ----
public void processRequest(OAPageContext pageContext, OAWebBean webBean)
super.processRequest(pageContext, webBean);
OATableBean comtable = (OATableBean)webBean.findIndexedChildRecursive("CompetencyTable");
comtable.clearCache(pageContext);
comtable.setInsertable(true);
comtable.setAutoInsertion(false);
comtable.prepareForRendering(pageContext);
String combuttonLabel =
pageContext.getMessage("XX_RESGEN", "XX_T_ADD_COMPETENCY", null);
OAAddTableRowBean comaddRow = (OAAddTableRowBean)comtable.getColumnFooter();
comaddRow.setText(combuttonLabel);
public void processFormRequest(OAPageContext pageContext, OAWebBean webBean)
super.processFormRequest(pageContext, webBean);
OAApplicationModule CreateAM = pageContext.getApplicationModule(webBean);
if (ADD_ROWS_EVENT.equals(pageContext.getParameter(EVENT_PARAM)))
CreateAM.invokeMethod("AddCompetency", null);
The Code in AddCertificationCO is--
public void processRequest(OAPageContext pageContext, OAWebBean webBean)
super.processRequest(pageContext, webBean);
OATableBean table = (OATableBean)webBean.findIndexedChildRecursive("CertificationTable");
table.clearCache(pageContext);
table.setInsertable(true);
table.setAutoInsertion(false);
table.prepareForRendering(pageContext);
String buttonLabel =
pageContext.getMessage("XX_RESGEN", "XX_T_ADD_CERTIFICATE", null);
OAAddTableRowBean addRow = (OAAddTableRowBean)table.getColumnFooter();
addRow.setText(buttonLabel);
public void processFormRequest(OAPageContext pageContext, OAWebBean webBean)
super.processFormRequest(pageContext, webBean);
OAApplicationModule CreateAM = pageContext.getApplicationModule(webBean);
if (OAWebBeanConstants.ADD_ROWS_EVENT.equals(pageContext.getParameter(EVENT_PARAM))) {
CreateAM.invokeMethod("AddCertificate", null);
and the code in MainCO is --
public void processRequest(OAPageContext pageContext, OAWebBean webBean)
super.processRequest(pageContext, webBean);
String actionInCreateResmScreen = pageContext.getParameter(EVENT_PARAM);
OAApplicationModule CreateAM = pageContext.getApplicationModule(webBean);
CreateAM.invokeMethod("CreateResumeMethod");
public void processFormRequest(OAPageContext pageContext, OAWebBean webBean)
super.processFormRequest(pageContext, webBean);
String actionInCreateResmScreen = pageContext.getParameter(EVENT_PARAM);
if (actionInCreateResmScreen.equals("AddProjects"))
pageContext.setForwardURL(
"OA.jsp?page=/CGR/oracle/apps/xx_resgen/employee/webui/AddProjectPG"
,null
,OAWebBeanConstants.KEEP_MENU_CONTEXT
,null
,null
,true
,OAWebBeanConstants.ADD_BREAD_CRUMB_NO
,OAWebBeanConstants.IGNORE_MESSAGES);
Now the problem is –
When I click on “Add Competency” button a row is added in both the tables and not only in Competency Table. i.e. the control is going in the PFR(Process Form Request) of both the controllers. And same is happening with “Add Certificate”. Data is being inserted in all the DBtables properly but this is the problem in design.
I tried a lot but I m not getting it right. Please help.

Hi,
SOURCE_PARAM - indicates the source of the event that is generating the current browser request. This maps to the name attribute of the web bean. If you wish to check whether a table generated an event, you include in your code:
if (tableBean.getName().equals(pageContext.getParameter(SOURCE_PARAM)))
To check for the "Add Rows" event:
if (tableBean.getName().equals(pageContext.getParameter(SOURCE_PARAM)))
&& ADD_ROWS_EVENT.equals(pageContext.getParameter(EVENT_PARAM)))
This is explained in Dev guide.
Hope this helps.
- Senthil

How to insert row in table control and save the data in tables

Hi,
I have one table control i am displaying data into table control ,
my problem is : i want to display data into read mode in table control.
but when i click on insert button on the same screen i want one blank line should inserted into table control , then i want to insert some data into table control on that row , when i click the save button . the new data inserted into the table control is insert that data into ztable ,
please give me solution
main problen is how can know inserted line in table control and pass that data into ztable.

Hi,
Follow the below logic,
PROCESS BEFORE OUTPUT.
MODULE STATUS_0001.
MODULE POPULATE_TABLE_CONTROL. --> Get the data from table store in
                                                                      ITAB
LOOP AT GT_CTRL_LP_D516 INTO GS_WA_CTRL_LP_D516
       WITH CONTROL CTRL_LP_D516
       CURSOR CTRL_LP_D516-CURRENT_LINE.
The following module moves data to control
    MODULE MOVE_TO_CONTROL.--> Move data from ITAB to table control
ENDLOOP.
PROCESS AFTER INPUT.
LOOP AT GT_CTRL_LP_D516.
ENDLOOP.
MODULE EXIT AT EXIT-COMMAND.
MODULE USER_COMMAND_0001. --> Here you have to take out the values from table control and update database table
Reward points if helpful.
Thanks and regards,
Mallareddy Rayapureddy,
Munich, Germany.

Update internal table data from table control

Hi GURUS,
I need help regarding one of my requirement.
I need to display data from the internal table on the screen and when the user selects a record/multiple records from screen and clicks on approve button i need to update one of the field from N to Y in the corresponding Ztable. Once the record is updated from Ztable , that should no longer be visible for the user on the screen.
I am using table control wizard to display data. I am able to update the Ztable, but that record is not refreshing from the user screen. Any suggestions would be approved.
Also please let me know if table control is the best way to do this/ alv grid control??

hi
REFRESH CONTROL Control-Name FROM SCREEN '0100' -> use this command to refresh the table control
to know more, read into
https://forums.sdn.sap.com/click.jspa?searchID=2934287&messageID=673474
Re: URGENT HELP REQ IN TABLE CONTROL WIZARD
if helpful, reward
Sathish. R

How to modify data in table control

hi
i have created table control where i have displayed data into table control
logic used
screen 200
PROCESS BEFORE OUTPUT.
MODULE SELECT_RECORD.
*&SPWIZARD: PBO FLOW LOGIC FOR TABLECONTROL 'TBC_200'
MODULE TBC_200_CHANGE_TC_ATTR.
*&SPWIZARD: MODULE TBC_200_CHANGE_COL_ATTR.
LOOP AT   IT_MARA
       INTO WA_MARA
       WITH CONTROL TBC_200
       CURSOR TBC_200-CURRENT_LINE.
    MODULE TBC_200_GET_LINES.
*&SPWIZARD:   MODULE TBC_200_CHANGE_FIELD_ATTR
ENDLOOP.
MODULE STATUS_0200.
PROCESS AFTER INPUT.
*&SPWIZARD: PAI FLOW LOGIC FOR TABLECONTROL 'TBC_200'
LOOP AT IT_MARA.
    CHAIN.
      FIELD WA_MARA-MATNR.
      FIELD WA_MARA-ERSDA.
      FIELD WA_MARA-ERNAM.
      MODULE TBC_200_MODIFY ON CHAIN-REQUEST.
    ENDCHAIN.
    FIELD WA_MARA-MARK
      MODULE TBC_200_MARK ON REQUEST.
ENDLOOP.
MODULE TBC_200_USER_COMMAND.
*&SPWIZARD: MODULE TBC_200_CHANGE_TC_ATTR.
*&SPWIZARD: MODULE TBC_200_CHANGE_COL_ATTR.
module -
MODULE SELECT_RECORD.
MODULE SELECT_RECORD OUTPUT.
SELECT MATNR ERSDA ERNAM
        FROM MARA
        INTO CORRESPONDING FIELDS OF TABLE it_mara.
ENDMODULE.                 " SELECT_RECORD OUTPUT
and
another thing
i have made field MARA-ERSDA. and FIELD WA_MARA-ERNAM editable by
input possible using layout
so
now those 2 fields contents are editable
i want to know how to edit and save the data
some body guide.
and i want to put the lock so that i can update
can tell how to implement lock.
Thanks
Edited by: viju bangalore on Jan 27, 2011 10:40 AM

Hi Viju,
In PAI do something like this
LOOP AT itab.
    MODULE mod_table_control.
ENDLOOP.
MODULE user_command_0100.
at module mod_table_control put this
MODULE mod_table_control INPUT.
MODIFY itab FROM demo_conn INDEX flights-current_line.
if sy-subrc ne 0.
       insert itab.
endif.
ENDMODULE.
for saving you can create at custom gui status with a save button, and at MODULE user_command_0100 save the data.

Sample pgm for moving data from table control to internal table

Hi Experts,
 I am newbi to ABAP. I don't have good material for Table control . Appreciate if you direct me to some good source of knowledge on Table control.
The problem at hand : I am trying to move info/data from table control (in screen painter/ input and output mode ) to ITAB but couldn't . Sample pgm if possible.
Modify ITAB index TC-Current_Line .
The above statement is not inserting new lines to ITAB . Help me!
Thanks for your time

hi,
do like this...
PROCESS AFTER INPUT.
*&SPWIZARD: PAI FLOW LOGIC FOR TABLECONTROL 'TAB1'
LOOP AT itab_det.
 CHAIN.
 FIELD itab_det-comp_code.
 FIELD itab_det-bill_no.
 FIELD itab_det-bill_date.
 FIELD itab_det-vend_cust_code.
 FIELD itab_det-bill_amt.
 MODULE tab1_modify ON CHAIN-REQUEST.
 ENDCHAIN.
 FIELD itab_det-mark
 MODULE tab1_mark ON REQUEST.
ENDLOOP.
MODULE tab1_modify INPUT.
APPEND itab_det.
ENDMODULE. "TAB1_MODIFY INPUT

How to create Table Control in Infotype

I want to create the table control in infotype (e.g. like table control in infotype 0008 basic pay ).

Hi
you can declare an internal table from infotype, with something like this
DATA: BEGIN OF t_p0008 OCCURS 0.
INCLUDE STRUCTURE pa0008.
DATA: END OF t_p0008.
the transparent table for infotype 0008 is PA0008, there is an structure P0008.
the transparent table for infotype 0001 is PA0001,
the transparent table for infotype 0002 is PA0002,
and so on..

How to populate data in table control .

hi all,
i put matnr no. in screen no. 103
validation is done at that screen only.
now when i want to modify dat record
when i put matnr no. at screen 103
so how i will get all data of dat number to table control screen.

Hi Darshan,
Here is a detailed description of how to update data in table controll.
Updating data in table control
The ABAP language provides two mechanisms for loading the table control with data from the internal table and then storing the altered rows of the table control back to the internal table.
Method 1: Read the internal table into the Table Control in the screenu2019s flow logic. Used when the names of the Table Control fields are based on fields of the internal table.
Method 2: Read the internal table into the Table Control in the module pool code. Used when the names of the Table Control fields are based on fields of the database table.
Method 1 (table control fields = itab fields)
In the flow logic we can read an internal table using the LOOP statement. Define the reference to the relevant able control by specifying WITH CONTROL <ctrl>
Determine which table entry is to be read by specifying CURSOR <ctrl>-CURRENT_LINE.
After the read operation the field contents are placed in the header line of the internal table. If the fields in the table control have the same name as the internal they will be filled automatically. Otherwise we need to write a module to transfer the internal table fields to the screen fields.
We must reflect any changes the user makes to the fields of the table control in the internal table otherwise they will not appear when the screen is redisplayed after PBO processing, (eg, after the user presses Enter or scrolls) However, this processing should be performed only if changes have actually been made to the screen fields of the table control (hence the use of the ON REQUEST)
PROCESS BEFORE OUTPUT.
LOOP AT ITAB_REG WITH CONTROL TCREG
CURSOR TCREG-CURRENT_LINE.
ENDLOOP.
PROCESS AFTER INPUT.
LOOP AT ITAB_REG.
MODULE MODIFY_ITAB_REG.
ENDLOOP.
MODULE MODIFY_ITAB_REG INPUT.
MODIFY ITAB_REG INDEX TCREG-CURRENT_LINE.
ENDMODULE.
Method 2 (table control fields = dict. fields)
If using a LOOP statement without an internal table in the flow logic, we must read the data in a PBO module which is called each time the loop is processed.
Since, in this case, the system cannot determine the number of internal table entries itself, we must use the EXIT FROM STEP-LOOP statement to ensure that no blank lines are displayed in the table control if there are no more corresponding entries in the internal table.
PROCESS BEFORE OUTPUT.
LOOP WITH CONTROL TCREG.
MODULE READ_ITAB_REG.
ENDLOOP.
PROCESS AFTER INPUT.
LOOP WITH CONTROL TCREG.
CHAIN.
FIELD: ITAB_REG-REG,
ITAB_REG-DESC.
MODULE MODIFY_ITAB_REG
ON CHAIN-REQUEST.
ENDCHAIN.
ENDLOOP.
MODULE READ_ITAB_REG OUTPUT.
READ TABLE ITAB_REG INDEX TCREG-CURRENT_LINE.
IF SY-SUBRC EQ 0.
MOVE-CORRESPONDING ITAB_REREG TO TCREG.
ELSE.
EXIT FROM STEP-LOOP.
ENDIF.
ENDMODULE.
MODULE MODIFY_ITAB_REG INPUT.
MOVE-CORRESPONDING TCREG TO ITAB_REG.
MODIFY ITAB_REG INDEX
TCREG-CURRENT_LINE.
ENDMODULE.
Updating the internal table
Method 1
PROCESS AFTER INPUT.
LOOP AT ITAB_REG.
CHAIN.
FIELD: ITAB_REG-REG,
ITAB_REG-DESC.
MODULE MODIFY_ITAB_REG ON CHAIN-REQUEST.
ENDCHAIN.
ENDLOOP.
MODULE MODIFY_ITAB_REG INPUT.
ITAB_REG-MARK = u2018Xu2019.
MODIFY ITAB_REG INDEX TCREG-CURRENT_LINE.
ENDMODULE.
Method 2
PROCESS AFTER INPUT.
LOOP WITH CONTROL TCREG.
CHAIN.
FIELD: TCREG-REG,
TCREG-DESC.
MODULE MODIFY_ITAB_REG ON CHAIN-REQUEST.
ENDCHAIN.
ENDLOOP.
MODULE MODIFY_ITAB_REG INPUT.
MOVE-CORRESPONDING TCREG TO ITAB_REG.
ITAB_REG-MARK = u2018Xu2019.
MODIFY ITAB_REG INDEX TCREG-CURRENT_LINE.
ENDMODULE.
Updating the database
MODULE USER_COMMAND_100.
CASE OK_CODE.
WHEN u2018SAVEu2019.
LOOP AT ITAB-REG.
CHECK ITAB_REG-MARK = u2018Xu2019.
MOVE-CORRESPONDING ITAB_REG TO TCREG.
UPDATE TCREG.
ENDLOOP.
WHEN u2026
u2026
ENDCASE.
ENDMODULE.
Hope this will solve your problem.
Regards,
Pavan.
Edited by: PAVAN CHANDRASEKHAR GANTI on Aug 3, 2009 12:48 PM

Insert data into table from JSP page using Entity Beans(EJB 3.0)

I want to insert data into a database table from JSP page using Entity Beans(EJB 3.0).
1. I have a table 'FRIENDS', (in Oracle 10g database).
2. It has two columns, 'NAME' and 'CITY'. Both have datatype strings(varchar2).
3. Now from a JSP page, having two textfields, 'NAME' and 'CITY', I want to insert data into table 'FRIENDS'.
4. In between JSP and database is a Entity Bean(EJB 3.0) and a stateless session bean.
5. I am using JDev as editor.
Please provide me code ASAP or link with similar example.
Thank you.
Anurag

Hi,
I am also trying that scenario. So u can
Post the jsp form data to a Servlet which will act as a Controller.
In the servlet invoke the business method.
Similar kind of app is in www.roseindia.net
Hope this would help u.
Meanwhile if u get any optimal solution, pls post it.
Thanks,
Happy Java Coding.

How to transfer data in table control in bdc

hi
how to transfer data in table control in bdc . I need the theory regarding this
bye

Hi,
just check in the forum , there is many threads available to ur questions.
Table control in BDC
http://www.sap-img.com/abap/bdc-example-using-table-control-in-bdc.htm
You can even refer to these related threads
bdc table control
Re: table control in bdc
table control in BDC
Reward if helpful.
Thanks
Naveen khan

How to delete data in table control

Hi,
I am doing module pool programming. After the user enters the data in table control after saving the data. if the user wants to remove the line item the line item shd be removed from the screen and data base.
Please Give me vaulable Suggestions
Regards

Hi,
Screen 8002 (with table control) --> select records --> press delete button --> delete selected records
Now you wan to delete those records selected by the user at runtime when DELETE button is clicked.
Take another internal table and work area same as the initial internal table and work area used in screen 8002 which is to be used to delete the selected data.
Take the names of the input/output fields as work_area-field_name and select column in table control as work_area-flag.
Also take a flag field of size 1 datatype character as the last field in the internal table and work area while declaration.
You must have passed a code in PBO of the screen for reading internal table into the table control.
So it reads the internal table into the table control whenever you perform any action on use command.
All you need to do is to write a code to modify the internal table form the table control while performing any user action.
Remember to change the LINE SEL option in attributes of table control as MULTIPLE.
At screen logic,
PROCESS BEFORE OUTPUT.
MODULE status_8002. "for pf-status
LOOP WITH CONTROL po_tab. "po_tab is table control
    MODULE pass_data. "to pass data into table control from internal table
ENDLOOP.
PROCESS AFTER INPUT.
MODULE user_command_8002. "for user command(back and exit)
LOOP WITH CONTROL po_tab.
    MODULE modify_data. "to modify data from table control into table control
ENDLOOP.
MODULE delete. "to delete the selected records
In PBO,
*&      Module STATUS_8002 OUTPUT
MODULE status_8002 OUTPUT.
SET pf-status 'ZAB_PFSTA'. " pf-status
DATA : line_count TYPE i.
DESCIRBE TABLE it_ekpo
LINES line_count.
po_tab-lines = line_count + 10.
" to make table control scrollable
ENDMODULE.                 " STATUS_8002 OUTPUT
*&      Module PASS_DATA OUTPUT
MODULE pass_data OUTPUT.
READ TABLE it_ekpo into wa_ekpo INDEX po_tab-current_line.
ENDMODULE.                 " PASS_DATA OUTPUT
"it_ekpo is internal table and wa_ekpo is the work area
In PAI,
*&      Module MODIFY_DATA INPUT
MODULE MODIFY_DATA INPUT.
MODIFY IT_EKPO INDEX PO_TAB-CURRENT_LINE FROM WA_EKPO.
"modify records from table control into the internal table
ENDMODULE.                 " MODIFY_DATA INPUT
*&      Module DELETE INPUT
MODULE DELETE INPUT.
OK_CODE = SY-UCOMM.
CASE OK_CODE.
    WHEN 'DELETE'. "when delete button is clicked
      SORT IT_EKPO BY FLAG DESCENDING. "sort by flag(selection column value)
      CLEAR WA_EKPO1.
      CLEAR WA_EKPO.
      REFRESH IT_EKPO1.
      LOOP AT IT_EKPO INTO WA_EKPO WHERE FLAG = 'X'.
        DATA : J TYPE I.
        CLEAR J.
        J = SY-TABIX. "assign index value if a record is selected
        MOVE-CORRESPONDING WA_EKPO TO WA_EKPO1. "append selected records to another
        "work area and append to another internal table to delete
        APPEND WA_EKPO1 TO IT_EKPO1.
        DELETE IT_EKPO. "delete the selected records from initial internal table
        " to reflect the changes on the table control
      ENDLOOP.
      IF J = 0.
        MESSAGE I006. "if no record selected
      ELSE. "if some records are selected
        DELETE ZEKPO FROM TABLE IT_EKPO1. "delete from database table
        COMMIT WORK.
        IF SY-SUBRC = 0.
          MESSAGE S007. "success message (records deleted)
        ENDIF.
      ENDIF.
ENDCASE.
ENDMODULE.                 " DELETE INPUT
Now at PAI, you have delete records and these changes are reflected back to the internal table.
Now when PBO is executed it will again read the initial internal table and will not show the deleted records.
Hope this solves your problem.
Thanks & Regards,
Tarun Gambhir

How to clear data in Table Control.

hi! all
How to clear the data in table control.
i have a Table control which displays column A data from the previous screen and allows to enter column B and column C and i have a button CLEAR, when i click CLEAR button the Data displaying in table control has to be cleared. how to do it.
Regards,
Nagulan

Hi,
Loop over the internal table of table control & clear data from table control.
loop at tctab.
clear tctab.
modify tctab.
endloop.
Best regards,
Prashant

How to Populate Internal table data to Table Control in a Report Program

Dear All,
       How to Populate Internal table data to Table Control in a Report Program? It is a pure report program with out any Module pool coding involved, which is just used to display data. Till now it is being displayed in a report. Now the user wants the data to be displayed in a table control. Could someone tell me how to go about with this.
Thanks in Advance,
Joseph Reddy

If you want to use a table control, you will need to create a screen.
In your report....
start-of-selection.
perform get_data. " Get all your data here
call screen 100. " Now present to the user.
Double click on the "100" in your call screen statement. This will forward navigate you to the screen. If you have not created it yet, it will ask you if you want to create it, say yes. Go into screen painter or layout of the screen. Use the table control wizard to help you along the process. It will write the code for you. Since it is an output only table control, it will be really easy with not a lot of code.
A better way to present the data to the user would be to give it in a ALV grid. If you want to go that way, it is a lot easier. Here is a sample of the ALV function module. You don't even have to create a screen.
report zrich_0004
       no standard page heading.
type-pools slis.
data: fieldcat type slis_t_fieldcat_alv.
data: begin of imara occurs 0,
      matnr type mara-matnr,
      maktx type makt-maktx,
      end of imara.
* Selection Screen
selection-screen begin of block b1 with frame title text-001 .
select-options: s_matnr for imara-matnr .
selection-screen end of block b1.
start-of-selection.
perform get_data.
perform write_report.
* Get_Data
form get_data.
select mara~matnr makt~maktx
            into corresponding fields of table imara
              from mara
               inner join makt
                 on mara~matnr = makt~matnr
                    where mara~matnr in s_matnr
                      and makt~spras = sy-langu.
endform.
* WRITE_REPORT
form write_report.
perform build_field_catalog.
* CALL ABAP LIST VIEWER (ALV)
call function 'REUSE_ALV_GRID_DISPLAY'
       exporting
            it_fieldcat = fieldcat
       tables
            t_outtab    = imara.
endform.
* BUILD_FIELD_CATALOG
form build_field_catalog.
data: fc_tmp type slis_t_fieldcat_alv with header line.
clear: fieldcat. refresh: fieldcat.
clear: fc_tmp.
fc_tmp-reptext_ddic    = 'Material Number'.
fc_tmp-fieldname = 'MATNR'.
fc_tmp-tabname   = 'IMARA'.
fc_tmp-outputlen = '18'.
fc_tmp-col_pos    = 2.
append fc_tmp to fieldcat.
clear: fc_tmp.
fc_tmp-reptext_ddic    = 'Material'.
fc_tmp-fieldname = 'MAKTX'.
fc_tmp-tabname   = 'IMARA'.
fc_tmp-outputlen = '40'.
fc_tmp-col_pos    = 3.
append fc_tmp to fieldcat.
endform.
Regards,
Rich Heilman

How to show data through table control

Hi Experts,
I have created an table control through wizard using table EKKO.
I have to populate one internal table( type ekko ), and then show it in output through table control.
Please advise, how to do that and in where i have to write the codes.
I will reward points for every suggestion
Thanks in advance.
regards

hi saubrab,
                This is kiran kumar.G.I am sending some sample code to populate data into table control check it once.
i will give input in 100 screen. and display table control in 200 screen.check it once once ..ok....
SE38 :(CODE)
*& Module pool       YMODULEPOOL_TABLECONTROL1                         *
*& DEVELOPER   : KIRAN KUMAR.G                                         *
*& PURPOSE     : TABLE CONTROL DEMO                                    *
*& CREATION DT : 17/12/2007                                            *
*& T.CODE      : YMODTABLECONTROL1                                     *
*& REQUEST     : ERPK900035                                            *
PROGRAM ymodulepool_tablecontrol1.
Tables
TABLES: yvbap, "Sales Document: Item Data
        vbak.   "Sales Document: Header Data
Controls
CONTROLS: my_table TYPE TABLEVIEW USING SCREEN 200.
Global Variables
DATA: gv_lines    TYPE i,
      gv_lines1   type i,
      gv_temp     type i,
      gv_flag(20) TYPE c VALUE 'DISP',
      gv_mode1    TYPE c,
      gv_mode     TYPE c VALUE 'C'. " C: Change, D :Display
Internal Table
DATA: BEGIN OF gt_item OCCURS 0,
        vbeln LIKE vbap-vbeln, "Sales Document Number
        posnr LIKE vbap-posnr, "Sales Document Item
        matnr LIKE vbap-matnr, "Material Number
        matkl LIKE vbap-matkl, "Material Group
        arktx LIKE vbap-arktx, "Short Text for Sales Order Item
        cflag,                  "Deletion Indicator
      END OF gt_item.
*&      Module STATUS_0100 OUTPUT
      text
MODULE status_0100 OUTPUT.
SET PF-STATUS 'ZTABLECONTROL' OF PROGRAM 'YMODULEPOOL_TABLECONTROL'.
SET TITLEBAR 'xxx'.
ENDMODULE.                 " STATUS_0100 OUTPUT
*&      Module USER_COMMAND_0100 INPUT
      text
MODULE user_command_0100 INPUT.
CASE sy-ucomm.
    WHEN 'DISP'.
      SELECT single vbeln
                    erdat
                    angdt
                    bnddt
               FROM vbak
              INTO (vbak-vbeln,vbak-erdat,
                    vbak-angdt,vbak-bnddt)
              WHERE vbeln = vbak-vbeln.
        IF sy-subrc EQ 0.
*Fetch the table control data and place them in Internal Table
          SELECT vbeln
                 posnr
                 matnr
                 matkl
                 arktx
            FROM yvbap
            INTO TABLE gt_item
            WHERE vbeln = vbak-vbeln.
          IF sy-subrc EQ 0.
*NO OF line in the Internal Table
            DESCRIBE TABLE gt_item LINES gv_lines.
            my_table-lines = gv_lines + 20.
          ENDIF.
        ENDIF.
*Call Screen 200.
        SET SCREEN 200.
      WHEN 'EXIT' OR 'BACK' OR 'CANCEL'.
*Exit from the Program
        CALL TRANSACTION 'SESSION_MANAGER'.
    ENDCASE.
ENDMODULE.                 " USER_COMMAND_0100 INPUT
module STATUS_0200 output.
SET PF-STATUS 'ZTABLECONTROL1'.
endmodule.                 " STATUS_0200 OUTPU
*&      Module copy_data OUTPUT
      text
module copy_data output.
*Fetch the current line data from the Table control
read table gt_item index my_table-current_line.
if sy-subrc eq 0.
*Populating data into screen fields
gt_item-vbeln = gt_item-vbeln.
gt_item-posnr = gt_item-posnr.
gt_item-matnr = gt_item-matnr.
gt_item-matkl = gt_item-matkl.
gt_item-arktx = gt_item-arktx.
endif.
SE51:CODE (SCREEN 100)
PROCESS BEFORE OUTPUT.
MODULE STATUS_0100.
PROCESS AFTER INPUT.
MODULE USER_COMMAND_0100.
SE51 :CODE (SCREEN 200)
PROCESS BEFORE OUTPUT.
MODULE STATUS_0200.
loop at gt_item with control my_table cursor my_table-current_line.
module copy_data.
endloop.
PROCESS AFTER INPUT.
loop at gt_item.
MODULE USER_COMMAND_0200.
endloop.
                         HAVE A NICE DAY..
Award points if helpful,kiran kumar.G

Urgent!!!!! Inserting data in table control of infotype.

Similar Messages

Maybe you are looking for