Urgent Inspection type

Hi friends,
Can anybody tell me How I can post material from QI in material to material transfer posting 309 mvt.Their is any inspection type that I can assign to material or I can create new inspetion type for this requirement.using customer enhancements.
Regards,
Chetan.

Hi
I am giving some details regarding to your requirement.
Actually inspection origin is assigned with movement type and Inspection type.
Please do the following scenario in the customization.
Create new inspection type and asssign the same to inspection origin
Then assing the inspection origin to Inspection type ( New created type)
Attach the same in the material master.
So when ever you required inspection lot
( doing the movement type) the system will create the inspection lot .
Thanks & Regards,
Srinivasan
Please revert back if you required clarification

Similar Messages

Inspection Specifications from configuration for inspection type 10

Hi All,
We need the inspection specifications for inspection type 10 (Insp. for delivery to cust. (w/ order)) from the characterstic values of the Sales Order Configuration. We have done this successfully for inspection types 03 and 04.
In configuration the checkbox of "Insp. according to configuration" is not available.
Kindly suggest how to do this. We urgently need the solution.
Regards
Ramakanth

Inspection accrd. to configuration is not possible with inspection type 10/11. If you are batch managed and you maintain the same char. specifications in batch determination, you can explore the option inspection by batch option available for insp.type 10, which will get the spec. from the batch.search strategy maintained for the customer.
As of now I dont know how you can do if the above option does not work .
Thanks,
Ram

Follow up action 14 Inspection Type- Equipment status change

could anyone tell me which follow up action for 14 inspection type is to be bought into for changing Equipment Availablity status to Non Availability status when I reject calibration lot for that particular equipment.

hi
kindly check whether this FM will work for you QFOA_OBJECT_STATUS_SET
regards
thyagarajan

How to maintain inspection type at the time of material creation using LSMW

Hi All,
I have a differnet Issue.
I am using a std. LSMW to create the materials.
But now using same LSMW i have to maintain Inspection types(ART-RMQAM) for the materials to be created.
How this can be done.
This filed is not found in any structures like BGR....to BMMH8
Can I create such a structure ??
Amol

Some need the hard answer: it is not possible in one go.
It is an embedded functionality in material master like classification, but it is not stored in a material master table.

Link of material movement with inspection type

Hello Masters,
I have scenario where component at shop floor will be segregated for inspection. The requirement is to do result/defect recording for those parts and if required then those parts need to be scrapped. So one way of doing that can be to move those parts to either blocked stock or QI stock (ideal option) or to specific storage location so that planning can be taken care of (if material are still in unrestricted then planning will consider those part as OK part and planning may fail). And to record result/defect we require inspection lot, which can be created by using above mentioned material movement.
But problem is how to create inspection lot so that we can do result/defect recording for those materials and scrap those material.
Please note that material master will have QM setup active (inspection type 01 - Goods Receipt Insp. for Purchase Order) and hence we can move material from unrestricted stock to QI stock only through QM.
I am not sure if we should use inspection type 08 - Stock transfer inspection, as there can be many instances of material transfer within plant. And with inspection type 08 active, system will create inspection lot every time there is any material transfer.
One way can be to create new goods movement only for this kind of transfer and new inspection type and link both together. So that when ever material is transferred using that particular goods movement, system creates inspection lot as well as material will be in QI stock. But I am not sure how this is possible or not and if yes then how this can be done.
I know query was too long to read and I think I was clear enough to explain what the requirement is.
It would be great if I can get some guidance from you masters at the earliest convenience as it is bit of importance.
Thanks and regards,
Devang

Hi Devang,
I guess this is Line rejection scenario. Correct me if understanding goes wrong. You have okayed the material against 01 inspection lot and UD has been given. Now you find this material defective on shop floor.
I think the 2nd option suggested by marwadi sounds better. I suggest one more possibility, just check whether feasible.
1.     Create quality notification Q2 type through QM01. While creating you can give references of original PO and material document, which fetch vendor name and material code automatically.
2.     Record defects and all other required information in notification.
3.     After this, you find an option in action box, transfer post unrestricted - >block . Click there. This will transfer the stock from unrestricted to block.
4.     If you want planning persons should not consider this stock as OK, remove block stock from MRP stock availability check. As a result of which stock lying in block will not be considered as available stock.
5.     From block stock you can send this material back to vendor through MIGO. Otherwise you can create return delivery from notification through action box also. Check what is feasible in your case.
Here you need not create inspection lot, no need to use any user exit.
Regards,
Anand Rao

Inspection lot creation for inspection type 05

Hi Gurus,
We have finished material FERT & semifinished material HALB.We have assigned insp. type 02 & 05 in material master of matl. HALB.When we create production order for FERT & confirm the order , inspection lot is generated for matl.HALB of inspection type 02.
Now we are reversing the goods issue by movement type mb1a, movement 262.In customizing for movement 262 inspection lot origin 05 is assigned.
My problem is that when i reverse the goods issue with mvmt.262, inspection lot is not created for insp. type 05. What should be the reason behind this? or are any changes to be done to above setting?
Regards
Ram

Hi Ram,
Just check the SPRO setting SPRO---> Quality Management ->Quality Inspection->inspection lot creation--->inspection for goods movement --->deactivate quality inspection for a movt type.
Here against movt type 262 uncheck the QM not active tick.
It will solve your problem.
Cheers,
Tushar

Inspection type 01 - inspection lot creation based on vendor batch number

Hi Guys,
this topic has been discussed several times here, but I was not able to find a suitable answer for my question.
I am facing the folowing requirement:
I have activated inspection type 01 for a raw material.
I am receiving a firs goods receipt from vendor A with vendor batch number 0001.
The system creates its own goods receipt batch number 0546 based on internal numbering.
A new inspection lot is created.
I am posting a second goods receipt from vendor a with vendor batch 0001.
The system creates a new batch number 0547 based on internal numbering.
A new inspection lot is created.
I do not want to get the second inspection lot, because I received vendor batch 0001 before and I am assuming it has been inspected or is in inspection.
Option 1: Post the second goods receipt against the first internal batch number created.
I am aware of this need at the moment, but a user is not always checking if there is an internal batch with the same vendor received before.
Can I customize the system to create inspection lots based on the fact that the vendor batch number was received before?
Or do I have to use an exit and some ABAP code to get the wanted result?
Thanks for your advice in advance.

You need to use one of the enhancements that Do-Wook has suggested. There is no standard SAP way to suppress the inspection based on the vendor batch number.
With the first enhancement you use the system to check for a previously received vendor batch and if one is found, then that batch number is proposed and not the next one from the numbering series. In this case, the lot isn't created than due to the inspection lot control of the inspection type.
With the second enhancement you check the vendor batch number and if it's been received you suppress the inspection lot creation and the stock goes right to unrestricted.
You'll probably need to do one or the other. Myself, I prefer the first enhancement.
Craig

Mass creation of Inspection types

Dear QM gurus
How to create the inspection types in mass processing?
For example I have to assigne inspection type 05 for 100(with activation of Inspection Type indicator) materials (the material masters are already created )
is there any method?Without using BDC or LSMW can i do it by MASS or MM17?
Thanks
MK

There is std T code available for activation of Inspection type in SAP-QM
Use T code QA08
Enter Material & plant and Inspection type with mass processing.
Regards
Sujit

Creation of inspection type (mm02 insp.setup) in mass

Hi All,
Is there a way of creating inspection type for all materials via mass update.
It is in the Quality management view of mm02.
Thanks
Venkat

Hi
Try to use trx MASS
Max

GR Purchase Order to Blocked Stock / Inspection Type 01

Hi all,
I want to receive 100 KG of Material X from a purchase order: 95 KG to Quality Inspection Area and 5 KG to Blocked (Stock Category S)
For the 5 KG to be received to the Blocked Stock, I used movement type 103, the material was received to "GR Blcoked Stock".
Then I used movement type 105 to release it. I chose Stock Type "Blocked".
After posting, the material was received to "Quality Inspection Area" and NOT to Blocked Stock. I think the reason was the Inspection Type 01 was activated, so the material was received by default to Quality Inspection Area.
How can I receive a material directly to "Blocked Stock"?
Regards,
Kifah Yacoub

thank you, but it seems you misunderstood my question.
What i want is: How to receive from purchase order to Blocked Stock (Stock Category S).
I tried movement type 103, but it's not exactly what i want.
Thank you

Digital signatures for calibration inspection (inspection type 14)

Hi,
I want to use digital signatures for results recording and usage decision (ud) when performing a calibration (inspection type 14). Normally you'd set-up the material authorization for digital signatures. But this can't be added to maintenance plans or equipment. Is there any way to set-up digital signatures for calibrations?
Regards,
Maarten

Explore SAP Note 576307
It may help u.

In-process inspection in repetitive mfg- Inspection type - 13

Hi there,
Can any one please tell me what is the differrence between the inspection type -03 & 13.
As per my understanding the only diff is that 03 is used in discrete mfg & 13 in repetitive mfg...
what is the other differrence ........??
Regrads
Kaushik

Hello Kaushik,
actually you have already found out that 03 is for descrete and 13 for repetive manufacturing. What is the difference?
03 Descrete Manufacturing : Limited production numbers and can be assigned to a customer order. Example: A computer built with various extras (built to order).
Accordingly inspection plans and inspection points assigned can be configured rather freely.
13 Repetitive Manufacturing: Production lines produce the same product in an unlimited number over a longer period of time. Example: Screws M8 x 40 mm (Mass production). In this case inspection plans need a relation to either time, numbers etc.
I hope that this information answers your question.
Regards
Isabelle

Cannot create copy of Std inspection type 08 (Stock transfer inspection)

Dear All:
I have created a copy of std inspection type 08 as Z08CP. I have made all the relevant assigments in IMG such as Maintain Inspection Lot Origins and Assign Inspection Types, Default values, etc.
During my unit testing I did use the newly created Z08CP but I have noticed I keep getting the error message " Change the inspection stock of material XXXXX in QM only" BUT THE MOMENT I SWITCHED THE MATERIALS MASTER BACK TO inspection type 08 the problem is gone. Only when I have the std inspection type in the material master I am allow it to post a MB1b (322) and created the inpscetion lot in the background
Weird !!
Any ideas.
Regards,
Mauricio

Let me see if i understand exactly what you guys are saying.
Following entries have been made in IMG
1. Plant dependent QM settings. Inspection Type for Available Stock in Quality Inspection field is empty
2. Maintain Inspection types: Created Z08CP as copy of 08
3. Maintain Inspection Lot Origins and Assign Inspection Types. For lot origin 08. created the following relationship
Lot Origin 08
01 08 Stock transfer inspection
02 Z08CP Prod Defect: Stock transfer inspection
4. Default values for inspection type. Copied default values from 08 to Z08CP
Note i did not make any changes to IMG section "Inspection for Goods Movements"
I tried again and same error was displayed. what is that I am missing here?
Regards,

Inspection lot with inspection type 03 - Using Inspection plan

Dear friends,
I want to create an inspection lot at the time of production order release (ideally - insp type 03). But I want to use inspection plan as a task list instead of routing for that lot.
Is it possible?
Best Regards,
Avinash

Hi Swapnali,
Was expecting this re-question.
We are at a stage where system is already ready. The routing master data contains large number of alternatives and huge number of parallel sequences. We were looking for a solution in which we would make an inspection plan without touching routing master data. Second I want to create the lot at the time of order release (basically one lot per production order) so don't want to use insp type 04.
In config, I assigned task list type Q in front of lot origin 03 (Maintain Inspection Lot Origins and Assign Inspection Types).
But still system is picking the routing and not inspection plan. Is there a way out?
Regards,
Avinash

Report on material with inspection type

Hi,
is there any report which can show which material is assigned to which inspection type.
regards
Raj

Dear Raj
1 ) Make use of QA08.
2) Give the plant and choose in the TAB Deactivate inspection Type
3) Maintain the inspection type 01 or 04 .
4) Execute
5) It will give you a list of material for which inspection types are assigned.
you can even assign inspection type in mass through this
hope this helps
Regards
Gajesh

Urgent Inspection type

Similar Messages

Maybe you are looking for