Urgent: integrating windows file server into ep using KM.

hi..
can somebody give me detail steps of integrating windows file server into ep using KM.
when i give password in the network path it is not accepting the password of the windows....
Good answers will be rewarded points...
bye....

Hi,
You can check:
System Administration-System Configuration-KM-CM-Repository Managers-File System Repository-create a new item
Root Directory can be:
machine\sharedirectory
and in CM-Global Services-Network Paths->create a new item
in Network Path field:
machine\sharedirectory
enter your password
user: domain\user
Integrating Documents from a Windows System into KM
http://help.sap.com/saphelp_nw2004s/helpdata/en/ed/b334ea02a2704388d1d2fc3e4298ad/frameset.htm
Patricio.

Similar Messages

Query on integrating windows file server into SAP KM using WEBDAV

hi
I have sucessfully integrated windows file server into SAP KM using WEBDAV. I have query in it regarding the possible validation against the portal Database user. Can we configure such that the user comparison happens for LDAP as well as database user. Have anyone configured such a scenario?
Regards,
Ganesh N

Hi Ganesh,
this should work in principle.
However you would need a user in Active Directory for each user in the portal database that should connect to the file server if you are using the SSO22KerbMap Module as I assume.
In my whitepaper I have mentioned this for the internal user index_service that does only exist in the portal database.
Best regards,
André

Problem while integrating windows file server into SAP KM using WEBDAV

Hi
I am trying to integrate windows file server into SAP KM using WEBDAV . I have downloaded the kerberos ini filter and included in the windows system. I am only trying to bring the files in the same system into KM but with no luck. When i check the log file in the kerberos folder i am getting
<b>12:02:22 10828/10476 E OnPreprocHeaders: Found 0 UserPrincipalNames for ADSI Filter (&(objectCategory=person)(objectClass=user) (userPrincipalName=xxxx))</b>.
In the log i am getting the following
ERROR! Delegation Flag:Use any authentication protocol: NOT ACTIVE
                       Open 'Active directory Users and Computers'. Choose <domain> -> 'Computers'.
                       Right-click 'IDBSRV8' and choose 'Properties'.
                       Select 'Delegation' and 'Trust this computer for delegation to specified services only'.
                       Select 'Use any authentication protocol'.
                ERROR! The Trusted-to-Authenticate-for-Delegation flag is not set for SPN 'HOST/idbsrv8.idbhq.org'.
                       Please check the SPN by calling 'setspn -l IDBSRV8'.
                       If the SPN is well known, configure the Trusted-to-Authenticate-for-Delegation flag:
                       Open 'Active directory Users and Computers'. Choose <domain> -> 'Computers'.
                       Right-click 'IDBSRV8' and choose 'Properties'.
                       Select 'Delegation' and 'Trust this computer for delegation to specified services only'.
                       Select 'Use any authentication protocol' and choose 'Add'.
                       Select 'Users or Computers' and enter IDBSRV8 as object name.
                       Add the ServicePrincipalName HOST/idbsrv8.idbhq.org.
Can anybody please help me in this regard???
Regards,
Ganesh N
Message was edited by:
        Ganesh Natarajan

Hi Ganesh,
this error message tells you that there is no user in your active directory that has the userPrincipalName xxxx.
The SSO22KerbMapModule works as follows.
1. It receives a SAP Logon Ticket from the WebDAV request.
2. If valid the SAP username is extracted. In your case the SAP username is xxxx.
3. It then searches for a user in AD. It does so using the attribute in the ini-file that has been specified to contain the SAP username. In your case the SAP username should be identical with the userPrincipalName.
So you have to make sure that the portal user id (j_user) is mapped to the same AD user attribute that is specified in the ini-file .
Best regards,
Andre

Migrate documents from the windows file server into km

Hi All,
I have around 100 GB of documents in a file server and i want to migrate the same data in to KM.
I am sure that there should be some standard process to do this,can any one please help me out in solving this.
Thanks
Ajay

Hi Ajay,
what do you mean by migrate? You could use a Windows Filessystem KM-Repository to integrated these files directly into KM (http://help.sap.com/saphelp_nw70/helpdata/en/e3/92322ab24e11d5993800508b6b8b11/frameset.htm)
Otherwise you could use WebDAV (http://help.sap.com/saphelp_nw70/helpdata/en/4a/217fb6c33c6748a1715a161ac942cd/frameset.htm, http://help.sap.com/saphelp_nw70/helpdata/en/43/9600e5391e25dee10000000a1553f7/frameset.htm) or the Portal Drive (http://help.sap.com/saphelp_nw70/helpdata/en/42/c99b91341a6bade10000000a1553f6/frameset.htm) to copy these files in a (for example) DB repository.
Regards,
Holger.

PDF file transfer from File server into SAP

Hi,
I need to get the PDF file which exists in the File server into SAP using XI in any format so that I can convert into required form in SAP but the file exists in PDF format in File server or any method other than XI .Is it possible to do it through XI if so please explain me the procedure.
Answers will be appreciated with points.
Thanks,
Ramesh.

Hi Ramesh,
In addition to above reply, also go through these blogs whcuh also talk about ADF Conversion:
<a href="/people/william.li/blog/2006/03/17/how-to-get-started-using-conversion-agent-from-itemfield:///people/william.li/blog/2006/03/17/how-to-get-started-using-conversion-agent-from-itemfield
<a href="/people/sap.user72/blog/2005/07/27/xi-generate-pdf-file-out-of-file-adapter:///people/sap.user72/blog/2005/07/27/xi-generate-pdf-file-out-of-file-adapter
Regards,
Subhasha Ranjan

Portal on Unix cannot mount Windows File server

Hi Experts,
We had installed a NW 7.0 portal onto HP-UNIX server and integrated it with MS AD server. Now, we are facing an issue that we cannot mount windows files server when we tried to configured it with TREX. Had anyone tried this function or it is the limitation? Is the following statement still correct or do we have workaround solutions?
"If you are using the Microsoft Active Directory Service, you can only integrate documents into a Windows portal. The combination of Microsoft Active Directory Service and a UNIX portal is not supported."
Best Regards

Hi Tom,
have a look at this link:
[http://help.sap.com/saphelp_nw04s/helpdata/en/ed/b334ea02a2704388d1d2fc3e4298ad/frameset.htm]
Your issue should work, but the prerequisite is for using the windows permissions:
"If you are using Microsoft Active Directory Service, you have to operate the Windows domain in mixed mode". If it is running in Native mode you cannot use the windows permissions. Nevertheless integrating documents into KM should work. The KM uses its own permissions instead.
Best regards,
Denis

Scale Out File Server for Applications using Shared VHDX

Just trying to get a definitive answer to the question of can we use a Shared VHDX in a SOFS Cluster which will be used to store VHDX files?
We have a 2012 R2 RDS Solution and store the User Profile Disks (UPD) on a SOFS Cluster that uses "traditional" storage from a SAN. We are planning on creating a new SOFS Cluster and wondered if we can use a shared VHDX instead of CSV as the storage
that will then be used to store the UPDs (one VHDX file per user).
Cheers for now
Russell

Just trying to get a definitive answer to the question of can we use a Shared VHDX in a SOFS Cluster which will be used to store VHDX files?
We have a 2012 R2 RDS Solution and store the User Profile Disks (UPD) on a SOFS Cluster that uses "traditional" storage from a SAN. We are planning on creating a new SOFS Cluster and wondered if we can use a shared VHDX instead of CSV as the storage that
will then be used to store the UPDs (one VHDX file per user).
Cheers for now
Russell
Sure you can do it. See:
Deploy a Guest Cluster Using a Shared Virtual Hard Disk
http://technet.microsoft.com/en-us/library/dn265980.aspx
Scenario 2: Hyper-V failover cluster using file-based storage in a separate Scale-Out File Server
This scenario uses Server Message Block (SMB) file-based storage as the location of the shared .vhdx files. You must deploy a Scale-Out File Server and create an SMB file share as the storage location. You also need a separate Hyper-V failover cluster.
The following table describes the physical host prerequisites.
Cluster Type
Requirements
Scale-Out File Server
At least two servers that are running Windows Server 2012 R2.
The servers must be members of the same Active Directory domain.
The servers must meet the requirements for failover clustering.
For more information, see Failover Clustering Hardware Requirements and Storage Options and Validate
Hardware for a Failover Cluster.
The servers must have access to block-level storage, which you can add as shared storage to the physical cluster. This storage can be iSCSI, Fibre Channel, SAS, or clustered storage spaces that use a set of shared SAS JBOD enclosures.
StarWind VSAN [Virtual SAN] clusters Hyper-V without SAS, Fibre Channel, SMB 3.0 or iSCSI, uses Ethernet to mirror internally mounted SATA disks between hosts.

Can I store referenced master files on a shared folder on a windows file server?

I have a windows file server where I have setup shared folders that my Macbook can access. Is it a supported configuration to keep my referenced master files on the windows share?

I hardly ever use the Bridge. I mostly use the Bridges to work one groups of new image RAW to edit metadata and create ACR settings. I don't use bridge features like collections or use the bridge to organize my image and I also don't use Lightroom. I mostly use Photoshop and Window's File explorer with my Image files. I have installed FastPictureViewer Codeg package to get thumbnails for RAW and PSD files in a Window's dialog. I don't like the delays introduced in workflows that are cause by the overhead requires for Bridge Cashes and Lighroom Databases.
However for you with 50 users sharing assets on network drives I would think you would need a library system above and beyond Bridge and Lightroom. A library system that provides access and version processes so users don't step on each others work.
If you want to use the bridge I do not believe it would be possible to use a shared cashed where multiple instances of the Bridge could concurrently maintain a common cache. I do not believe either Bridge or Lighroom design would have the locking protocols required for shared concurrent use.

When I access a windows files server with the mac I am adding .apple (hidden files). How can I prevent this.

When I access a windows files server with the mac I am adding .apple (hidden files). How can I prevent this?

Look for a program called BlueHarvest. I'm not sure if it still works with Mountain Lion.
I believe your file server can be set up to handle the metadata files, but I suppose that would depend on the Server software and your IT staff.

Error while integrating Windows System - Share into KM

Hi Experts,
I am new to KM and there is a requirement of Integrating Windows System into KM.
Portal System : a.xyz.com
Remote System: b.xyz.com
Share -
b.xyz.com\d_share$
Both systems reside in the same domain and share is created on the remote system which needs to be accessed from Portal. User xyz\Rob has given R/W access to the share.
The steps I followed are:
1. Created a Network Path.
    - Specified Network Path as given above.
    - Added credentials for xyz\Rob
2. Created Windows System in KM Systems Landscape.
3. Created File System Repository.
    - Specified Share as Root Direcory.
    - Specified Windows Landscape System as the system defined in the above step.
    - Security Manger as W2kSecurityManager
Now when I saved it, default trace logs are giving following dump :
#1.5 #000E0CB1BAAE005E0000000E000017F000046821B68B46BA#1240393912559#com.sapportals.wcm.service.fsmount.FSMountService#sap.com/irj#com.sapportals.wcm.service.fsmount.FSMountService#Guest#0##n/a##4bd037e02e7211dec03e000e0cb1baae#Thread[ConfigurationEventDispatcher,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Error##Plain###Error mounting drive ,path \\\\b.xyz.com\\d_share$#
#1.5 #000E0CB1BAAE005E0000000F000017F000046821B68B617E#1240393912575#com.sapportals.wcm.service.fsmount.FSMountService#sap.com/irj#com.sapportals.wcm.service.fsmount.FSMountService#Guest#0##n/a##4bd037e02e7211dec03e000e0cb1baae#Thread[ConfigurationEventDispatcher,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Warning##Plain###FSMountService Reconfiguration (New path) failed to mount network path \\\\b.xyz.com\\d_share$ - com.sapportals.wcm.service.fsmount.RemoteAccessException: Error Mounting Drive: \\\\b.xyz.com\\d_share$
     at com.sapportals.wcm.service.fsmount.FSMountService.mountDrive(FSMountService.java:91)
     at com.sapportals.wcm.service.fsmount.FSMountService.updateConfigurables(FSMountService.java:346)
     at com.sapportals.wcm.service.fsmount.FSMountService.reconfigure(FSMountService.java:286)
     at com.sapportals.wcm.crt.CrtThreadSafeComponentHandler.tryToReconfigure(CrtThreadSafeComponentHandler.java:302)
     at com.sapportals.wcm.crt.CrtThreadSafeComponentHandler.handleReconfigure(CrtThreadSafeComponentHandler.java:148)
     at com.sapportals.wcm.crt.CrtComponentManager.reconfigureComponent(CrtComponentManager.java:343)
     at com.sapportals.wcm.crt.CrtConfigurationEventListener.notifyComponentConfigChanged(CrtConfigurationEventListener.java:79)
     at com.sapportals.wcm.repository.runtime.CmConfigurationProvider.sendChangeEvent(CmConfigurationProvider.java:1257)
     at com.sapportals.wcm.repository.runtime.CmConfigurationProvider.sendChangeEventOrRestart(CmConfigurationProvider.java:1209)
     at com.sapportals.wcm.repository.runtime.CmConfigurationProvider.configEvent(CmConfigurationProvider.java:302)
     at com.sapportals.config.event.ConfigEventService.dispatchEvent(ConfigEventService.java:227)
     at com.sapportals.config.event.ConfigEventService.configEvent(ConfigEventService.java:112)
     at com.sapportals.config.event.ConfigEventDispatcher.callConfigListeners(ConfigEventDispatcher.java:308)
     at com.sapportals.config.event.ConfigEventDispatcher.flushEvents(ConfigEventDispatcher.java:251)
     at com.sapportals.config.event.ConfigEventDispatcher.run(ConfigEventDispatcher.java:110)
#1.5 #000E0CB1BAAE005E00000010000017F000046821B68B6F1C#1240393912575#com.sapportals.wcm.service.fsmount.FSMountService#sap.com/irj#com.sapportals.wcm.service.fsmount.FSMountService#Guest#0##n/a##4bd037e02e7211dec03e000e0cb1baae#Thread[ConfigurationEventDispatcher,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Warning##Plain###FSMountService Reconfiguration failed to get configuration of network path CaesarNetworkPath - com.sapportals.wcm.service.fsmount.RemoteAccessException:
     at com.sapportals.wcm.service.fsmount.FSMountService.updateConfigurables(FSMountService.java:351)
     at com.sapportals.wcm.service.fsmount.FSMountService.reconfigure(FSMountService.java:286)
     at com.sapportals.wcm.crt.CrtThreadSafeComponentHandler.tryToReconfigure(CrtThreadSafeComponentHandler.java:302)
     at com.sapportals.wcm.crt.CrtThreadSafeComponentHandler.handleReconfigure(CrtThreadSafeComponentHandler.java:148)
     at com.sapportals.wcm.crt.CrtComponentManager.reconfigureComponent(CrtComponentManager.java:343)
     at com.sapportals.wcm.crt.CrtConfigurationEventListener.notifyComponentConfigChanged(CrtConfigurationEventListener.java:79)
     at com.sapportals.wcm.repository.runtime.CmConfigurationProvider.sendChangeEvent(CmConfigurationProvider.java:1257)
     at com.sapportals.wcm.repository.runtime.CmConfigurationProvider.sendChangeEventOrRestart(CmConfigurationProvider.java:1209)
     at com.sapportals.wcm.repository.runtime.CmConfigurationProvider.configEvent(CmConfigurationProvider.java:302)
     at com.sapportals.config.event.ConfigEventService.dispatchEvent(ConfigEventService.java:227)
     at com.sapportals.config.event.ConfigEventService.configEvent(ConfigEventService.java:112)
     at com.sapportals.config.event.ConfigEventDispatcher.callConfigListeners(ConfigEventDispatcher.java:308)
     at com.sapportals.config.event.ConfigEventDispatcher.flushEvents(ConfigEventDispatcher.java:251)
     at com.sapportals.config.event.ConfigEventDispatcher.run(ConfigEventDispatcher.java:110)
#1.5 #000E0CB1BAAE005E00000011000017F000046821B68B72C8#1240393912575#com.sapportals.wcm.service.fsmount.FSMountService#sap.com/irj#com.sapportals.wcm.service.fsmount.FSMountService#Guest#0##n/a##4bd037e02e7211dec03e000e0cb1baae#Thread[ConfigurationEventDispatcher,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Warning##Plain###FSMountService Reconfiguration Failed to get configuration on network paths to mount - com.sapportals.wcm.service.fsmount.RemoteAccessException:
     at com.sapportals.wcm.service.fsmount.FSMountService.updateConfigurables(FSMountService.java:359)
     at com.sapportals.wcm.service.fsmount.FSMountService.reconfigure(FSMountService.java:286)
     at com.sapportals.wcm.crt.CrtThreadSafeComponentHandler.tryToReconfigure(CrtThreadSafeComponentHandler.java:302)
     at com.sapportals.wcm.crt.CrtThreadSafeComponentHandler.handleReconfigure(CrtThreadSafeComponentHandler.java:148)
     at com.sapportals.wcm.crt.CrtComponentManager.reconfigureComponent(CrtComponentManager.java:343)
     at com.sapportals.wcm.crt.CrtConfigurationEventListener.notifyComponentConfigChanged(CrtConfigurationEventListener.java:79)
     at com.sapportals.wcm.repository.runtime.CmConfigurationProvider.sendChangeEvent(CmConfigurationProvider.java:1257)
     at com.sapportals.wcm.repository.runtime.CmConfigurationProvider.sendChangeEventOrRestart(CmConfigurationProvider.java:1209)
     at com.sapportals.wcm.repository.runtime.CmConfigurationProvider.configEvent(CmConfigurationProvider.java:302)
     at com.sapportals.config.event.ConfigEventService.dispatchEvent(ConfigEventService.java:227)
     at com.sapportals.config.event.ConfigEventService.configEvent(ConfigEventService.java:112)
     at com.sapportals.config.event.ConfigEventDispatcher.callConfigListeners(ConfigEventDispatcher.java:308)
     at com.sapportals.config.event.ConfigEventDispatcher.flushEvents(ConfigEventDispatcher.java:251)
     at com.sapportals.config.event.ConfigEventDispatcher.run(ConfigEventDispatcher.java:110)
I have gone through the help.sap.com documentation but I found it quite confusing.
Please suggest.
Br,
Nilz

Hi,
Check whether you are able to access the same file share form the Portal server where your J2EE is installed.
And also if you have used
b.xyz.com
d_share in the network path try using //b.xyz.com/d_share in the network path as mentioned here.
https://www.sdn.sap.com/irj/scn/thread?messageID=1283643
Regards
~Hussain

Integrating External File Server In SAP EP - Help Needed.

Hello All,
We have a EP 7.0 Running on HP-UX, can some one please tell me how I can integrate an External File Server or a Web DAV Folder into the SAP EP.
Any suggestion would be a great help.
Best Wishes,
John.
Message was edited by:
John Bray

Hi John,
This would be helpful for you for Webdav or external filesystems
<a href="http://help.sap.com/saphelp_ep60sp2/helpdata/en/ed/b334ea02a2704388d1d2fc3e4298ad/frameset.htm">Integrating Documents from a Windows System into KM</a>
Pls reward points if helpful
Regards
Vineeth

No more connections available to this remote computer...Urgent Help for File server...

Hi Guys,
I need urgent help regards to our school File server which is having "No more connection to this remote computer error"
on SMB Shares where I usually authenticate with a domain username it used to work fine since till 3 weeks ago.
Now I can browse the SMB shares with only IP... Netbios gets straight away this error message from non-domain joined pc's where the computer needs to connect to the SCCM distribution point on this file server.
Strangely, Domain joined pc's does not have this problem at all they can use Netbios or IP no problem at all. But someone from a standalone laptop or desktop who needs to access shares through netbios gets this message.
Can someone help me please?
I did check DNS yet there is no problem on DNS I checked PTR record for the server to make sure it is not turned in to multihome accidently but nothing at all.
I also did a NETMON where I captured the data from server and the client I get these errors:
205 4:54:35 PM 16/12/2013
7.3299179 10.2.1.96
10.2.0.13 TCP
TCP:Flags=......S., SrcPort=49312, DstPort=Microsoft-DS(445), PayloadLen=0, Seq=1771710719, Ack=0, Win=8192 ( Negotiating scale factor 0x2 ) = 8192
{TCP:22, IPv4:21}
206 4:54:35 PM 16/12/2013
7.3299668 10.2.0.13
10.2.1.96 TCP
TCP:Flags=...A..S., SrcPort=Microsoft-DS(445), DstPort=49312, PayloadLen=0, Seq=2167618331, Ack=1771710720, Win=8192 ( Negotiated scale factor 0x8 ) = 2097152
{TCP:22, IPv4:21}
207 4:54:35 PM 16/12/2013
7.3301468 10.2.1.96
10.2.0.13 TCP
TCP:Flags=...A...., SrcPort=49312, DstPort=Microsoft-DS(445), PayloadLen=0, Seq=1771710720, Ack=2167618332, Win=16425 (scale factor 0x2) = 65700
{TCP:22, IPv4:21}
208 4:54:35 PM 16/12/2013
7.3301468 10.2.1.96
10.2.0.13 SMB
SMB:C; Negotiate, Dialect = PC NETWORK PROGRAM 1.0, LANMAN1.0, Windows for Workgroups 3.1a, LM1.2X002, LANMAN2.1, NT LM 0.12, SMB 2.002, SMB 2.???
{SMBOverTCP:23, TCP:22, IPv4:21}
209 4:54:35 PM 16/12/2013
7.3307974 10.2.0.13
10.2.1.96 SMB2
SMB2:R NEGOTIATE (0x0), GUID={8447F237-5219-D48A-40C0-29092450C68E}
{SMBOverTCP:23, TCP:22, IPv4:21}
210 4:54:35 PM 16/12/2013
7.3314064 10.2.1.96
10.2.0.13 SMB2
SMB2:C SESSION SETUP (0x1) {SMBOverTCP:23, TCP:22, IPv4:21}
211 4:54:35 PM 16/12/2013
7.3318815 10.2.0.13
10.2.1.96 SMB2
SMB2:R - NT Status: System - Error, Code = (22) STATUS_MORE_PROCESSING_REQUIRED SESSION SETUP (0x1), SessionFlags=0x0
{SMBOverTCP:23, TCP:22, IPv4:21}
212 4:54:35 PM 16/12/2013
7.3324012 10.2.1.96
10.2.0.13 SMB2
SMB2:C SESSION SETUP (0x1) {SMBOverTCP:23, TCP:22, IPv4:21}
215 4:54:35 PM 16/12/2013
7.3339977 10.2.0.13
10.2.1.96 SMB2
SMB2:R - NT Status: System - Error, Code = (109) STATUS_LOGON_FAILURE SESSION SETUP (0x1)
{SMBOverTCP:23, TCP:22, IPv4:21}
216 4:54:35 PM 16/12/2013
7.3341805 10.2.1.96
10.2.0.13 TCP
TCP:Flags=...A.R.., SrcPort=49312, DstPort=Microsoft-DS(445), PayloadLen=0, Seq=1771711788, Ack=2167619070, Win=0 (scale factor 0x2) = 0
{TCP:22, IPv4:21}
217 4:54:35 PM 16/12/2013
7.3357089 10.2.1.96
10.2.0.13 TCP
TCP:Flags=......S., SrcPort=49313, DstPort=Microsoft-DS(445), PayloadLen=0, Seq=2943201172, Ack=0, Win=8192 ( Negotiating scale factor 0x2 ) = 8192
{TCP:27, IPv4:21}
218 4:54:35 PM 16/12/2013
7.3357422 10.2.0.13
10.2.1.96 TCP
TCP:Flags=...A..S., SrcPort=Microsoft-DS(445), DstPort=49313, PayloadLen=0, Seq=3718656547, Ack=2943201173, Win=8192 ( Negotiated scale factor 0x8 ) = 2097152
{TCP:27, IPv4:21}
219 4:54:35 PM 16/12/2013
7.3359768 10.2.1.96
10.2.0.13 TCP
TCP:Flags=...A...., SrcPort=49313, DstPort=Microsoft-DS(445), PayloadLen=0, Seq=2943201173, Ack=3718656548, Win=16425 (scale factor 0x2) = 65700
{TCP:27, IPv4:21}
220 4:54:35 PM 16/12/2013
7.3359768 10.2.1.96
10.2.0.13 SMB2
SMB2:C NEGOTIATE (0x0), GUID={8213462D-2600-D1B1-11E3-65FC4BCDE707}
{SMBOverTCP:28, TCP:27, IPv4:21}
221 4:54:35 PM 16/12/2013
7.3364173 10.2.0.13
10.2.1.96 SMB2
SMB2:R NEGOTIATE (0x0), GUID={8447F237-5219-D48A-40C0-29092450C68E}
{SMBOverTCP:28, TCP:27, IPv4:21}
222 4:54:35 PM 16/12/2013
7.3369702 10.2.1.96
10.2.0.13 SMB2
SMB2:C SESSION SETUP (0x1) {SMBOverTCP:28, TCP:27, IPv4:21}
223 4:54:35 PM 16/12/2013
7.3373474 10.2.0.13
10.2.1.96 SMB2
SMB2:R - NT Status: System - Error, Code = (22) STATUS_MORE_PROCESSING_REQUIRED SESSION SETUP (0x1), SessionFlags=0x0
{SMBOverTCP:28, TCP:27, IPv4:21}
224 4:54:35 PM 16/12/2013
7.3377060 10.2.1.96
10.2.0.13 SMB2
SMB2:C SESSION SETUP (0x1) {SMBOverTCP:28, TCP:27, IPv4:21}
227 4:54:35 PM 16/12/2013
7.3390552 10.2.0.13
10.2.1.96 SMB2
SMB2:R - NT Status: System - Error, Code = (109) STATUS_LOGON_FAILURE SESSION SETUP (0x1)
{SMBOverTCP:28, TCP:27, IPv4:21}
Regards,
Gokhan

Solution has been found,
After doing bit of a backtrack, site DC's were out of sync with PDC with time.
Also Time service was shutdown on PDC which has been enabled and pointed to the Australian pool ntp IP address.
Everything is back on track now.
Regards,
Gokhan Cil

Any Way to test Integration of File Server with Portal??

Hi all,
I want to integrate File Server with my Portal so that my Application and Data remains seperated.
I have integrated File Server but i am not able to find the Folder of file server in KM.
i have create KM Navigation Iview When i specify any folder that is available in KM it works fine but i can not see the folder of file server...
<b>Is there any test with which i can check that weather my File Server is Integrated properly with my Portal or not?? </b>
Any help will be highly Appretiated ...
its very Urgent!!
Thanks in Advance
Vinit

Hi,
I think already file system repository created in the portal. plz check it
Goto >System Admin>System Config>KM>Content management>Repositories manager>File system Repository. or create a new repository..
You can use File System Repository so that you can integrate ur file server with portal. Refer this link
http://help.sap.com/saphelp_nw04/helpdata/en/e3/92322ab24e11d5993800508b6b8b11/frameset.htm
Regards,
Senthil K.

FSCT - Having Error "There were errors during running WordFileClose.dll scenario" when running the FSCT in controller & non-windows file server

I encounter 2 errors in the controller when running FSCT.
- "There were errors during running WordFileClose.dll scenario"
- "There were errors during running WordFileClose.dll scenario"
Does anyone has any ideas for this errors?
I am using the following server to run the FSCT:
- AD Server: Windows 2008 R2 SP1 x64
- FSCT Controller: Windows 2008 R2 SP1 x64
- Client: Windows 7 x64
- File Server: Non-Windows Server (EMC Isilon)
And the commands are as follows:
> fsct prepare dc /users 10 /clients testing /password password
> fsct prepare controller
> fsct prepare client /server ofscluster /password password /users 10 /domain abc.local /server_ip 192.168.2.16
> fsct prepare server /clients testing /password password /users 10 /domain abc.local /volumes \\ofscluster\fsroot1 /workload HomeFolders /create_only_fileset
> fsct run client /controller fsctcon /server ofscluster /password password /domain abc.local
fsct run controller /server ofscluster /password password /volumes \\ofscluster\fsroot1 /clients testing /min_users 2 /max_users 10 /step 2 /duration 360 /workload HomeFolders

Dear all,
The errors were:
<Error>1264 DeviceIoControl 1{WINERR}</Error>
<Error>Error executing scenario: WordFileOpen.dll</Error>
<Error>943 DeviceIoControl 50{WINERR}</Error>
<Error>Error executing scenario: WordFileClose.dll</Error>
Do you have any idea about what the errors mean?
Thanks,
Rayson

Mac Lock Files on Windows File Server.

Hi Pro,
got some problem with Mac based design studio who have some weird issues with files locking on a Windows Server 2008 R2 server. After investigation, it is 100% a file locking issue. Some programs including preview, acrobat, indesign, finder or opening files (assuming locking them) and not releasing. Killing all the programs or remounting the share is working (releasing all lock files) but it's only a workaround not a fix. Do you any hints ? or Solutions ? all 10.7.3 Mac, using SMB protocol on a windows 2008 R2 File server.
Thanks to all !!!

yeah try this ... sorry french blog .. try google translate:
http://clickpom.com/blog/mac-finder-lock-files-on-windows-server-smb-shared/
this fix the issue for my client

Urgent: integrating windows file server into ep using KM.

Similar Messages

Maybe you are looking for