Urgent Internal Harddrive question
Hey
I have a Power Mac G5 Dual 2.3
i bought a second drive, a Seagate 300 gb internal drive that says on the package that it works with macs
however, the ribbon cable types are different!!!
am I doing something wrong??
This is a Ultra ATA/100
7200 RPM
26 mb Cache
3.5-inch Drive
PC or Mac
You need to take the ATA drive back and get a SATA version. SATA hard drives are required for all PowerMac G5 internal mountings. You can use converters that allow a ATA drive to work in a G5 but they run $40 and are slower. You are better off getting an SATA hard drive to begin with.
Have fun,
Michael
Similar Messages
-
My Mac G5 crashed 2 years ago, and I am trying for format a 3 TB internal harddrive.
Hi There,
I am trying to format a 3 TB internal harddrive, so that I can reinstal Final Cut Pro 4 on to this new drive, in order to continue editting video. My last hard drive crashed and I was unable to pull anything off of it, so I am starting from scratch. I did have two hard drives, one died and the other one is where all my applications were stored. The 2nd drive is still good, but I running out of space for my video files, hence the reason for this newest drive.
I am working off of a Mac Pro G5 and I believe I was running the OS X 10.4 software. I have the start up disk to install it on my new drive. However, when I try to format the drive, my computer stops working and my mouse pointer begins to spin a rainbow ball and then I end up having to quit disk utility. I am half afraid, I will eventually make the new drive non-operational. So I need a little help.
My questions are these as follows:
When I try to format the 3 TB hard drive, should I consider partitioning it? What is the up scale to partitioning a hard drive? What is the downfall of that option?
Also, I am able to verify the disk, however the disk shows up as untitled and it only shows up as 746.4 GB, where as I thought it should show up as 2.7 TB. Am I doing something wrong?
I would greatly appreciate some help in this.
Thanks.
TallGSo I was able to format the 3TB hard drive, but it only formated it as 736GB
Oh, only 10.4.11 & up can see the new Adavanced Format Drives properlly, they now have 4096 Byte Sectors instead of the old 512 Byte sectors, so that explains the shortage there.
The Highest you can go is 10.5.8
Leopard requirements/10.5.x...
* Mac computer with an Intel, PowerPC G5, or PowerPC G4 (867MHz or faster) processor
minimum system requirements
* 512MB of memory (I say 1.5GB for PPC at least, 2-3GB minimum for IntelMacs)
* DVD drive for installation
* 9GB of available disk space (I say 30GB at least)
Classic/OS9 Apps no longer supported.
Trouble is Apple no longer sells it, check eBay & such for the Retail version, not the Gray Discs...
http://www.ebay.com/sch/i.html?_nkw=mac+os+x+leopard+retail+10.5
You have to call Apple & likely ask for a Product Specialist to get it, if they still have it! Helps to tell them you have an iPad/iPhone & you can't run 10.6.
There are workarounds if the 867MHz CPU is the only hangup...
http://sourceforge.net/projects/leopardassist/
http://lowendmac.com/osx/leopard/unsupported.html
List of Applications Not Compatible with Leopard...
http://guides.macrumors.com/List:Applications_Not_Compatible_with_Leopard -
Help with opening up a Seagate Barracuda SATA Internal HardDrive on my Macbook Pro!
Hi Everyone!
I have two questions that I would really love someone to
help me out with!!
I really need help trying to open three Seagate Barracuda SATA Internal HardDrive that I was given to edit
dailies for a feature film! I tried all three and only one worked - however, didn't opened but wanted me to intialize
it and reformat it so it can be discovered and opened. But all three contain video and audio files within them, so I cannot
reformat these drives!
And with the other two, apparently they can be opened on a PC but I have to edit my dailies
on Final Cut 7 - and from what I know, Final Cut Pro is not avaiable for PCs!!
If there is anyone that can answer these two question, please respond soon!!
Thanks!I suspect those HDDs are NFTS formats. Paragon may be the answer for you then:
http://www.paragon-software.com/home/ntfs-mac/
Regarding Final Cut, I suggest you post that part of your query on the Final Cut forum where you will have the best chances for an accurate solution.
Ciao. -
Purchasing new internal harddrive
I have HP Pavilion dv4-1242TX
Recently, my original 320 GB (Western Digital Scorpio Blue - WD3200BPVT) internal harddrive crashed and became non-responsive.
So now I want to buy a new 500 GB internal harddrive but I am confused whether my laptop will support it or not.
WD Blue 500 GB Laptop internal hard drive (WD5000BPVT/ WD5000LPVX)
KEY FEATURES
2.5 inch Form Factor
SATA 3.0 Gbps Interface
8 MB Cache Memory
5400 RPM Spin Speed
500 GB HDD
600000 Load / Unload Cycles
Please help me out..
Thanks..
This question was solved.
View Solution.Other than the size, I see no difference between the two drives. Just have the Recovery DVD set available and install the new drive, run the Recovery Set and away you go. If the old drive is truely toast, there is nothing else to do but to run the Microsoft updates.
Or install Windows 7, retail version of your choice.
{---------- Please click the "Thumbs Up" to say thanks for helping.
Please click "Accept As Solution" if my help has solved your problem. ----------}
This is a user supported forum. I am a volunteer and I do not work for HP. -
Internal harddrive on MBP information corrupted
Hi all
During a empying process of the trash in secured mode my MacBook Pro shut down suddenly and restarted by himself.
After resuming I finished the task on the trash and in order to check how much of empty space on the internal harddrive I gain I done a Read Information on my Macintosh HD drive and I saw that the information related to used and empty space on the harddrive wasn't correct.
I checked with Disk utilities and there no problem, the values of used and free space are OK
Any idea how to sort this please ?
Best regards
BkantiqueI had the same problem. After several attempts I went to browse this discussion group from a different machine to check if others had the same issue. This took maybe 5 ot 10 min. and to my surprise when I looked again at the MBPro screen the installer had seen the disc.
Very weird. It tooks several minutes to the installer to see the disk, without any indication that it was actually still doing something, so I thought it was dead. -
so i purchased two of the data recovery apps. except one was by mistake. "FileAngel Lite" didn't realize that app didnt search internal harddrives. is there a way i can cancel that purchase on my Apple ID?
Hi...
I already replied to you here > https://discussions.apple.com/message/17843887#17843887
Please do not start duplicate topics. -
Westerndigital internal harddrive is not recognised
Hi there,
I have tried to replace my old hitachi internal harddrive in a mid2010 macbookpro 13inches with a westerndigital internal harddrive designed for osx lion.
Unfortunately, this is not recognised once i insert it in.
Has anybody had this type of problem? How did u sort it out?
Alternatively, what other internal hard disk would u advice?
Wd claims it s apple's fault as they are required to provide the right drivers with the software updates.
Unfortunately, apple does not believe so.
The hardrive is not faulty as i have been using as an external harddrive so far.
Your help would be really appreciated. Many thanks in advance. Luigi>> how do I know if the cable i am gonna will not have the same issue
You don't, until it's replaced & solves the problem, although that's a fairly regular problem on these forums. It's more common though, for the drive to be visible in DU, & yet fail to start up properly, or perhaps show as a startup option... & your new drive is no faster than the original, so it's hard to say for sure without replacing one or the other. I'd plump for the drive, if it were me, despite it working externally. -
my hardrive Had a smart status warning so i made a backup of it on my external harddrive through disk utility. i checked to make sure that the backup was working and i had no problems with it. i then bought a new internal harddrive and swaped it out but when i was in recovery mode to try to restore my new hardrive i kept getting an error message saying restore error, input/output error
The big dilemma with a new Internal drive is separating Drive operation from 'inside the MacBook' operation. If you had an External Enclosure, you could do all the work (including booting up from the new drive) using the External enclosure.
Then if a know-good drive develops problems only when moved inside the MacBook, it is time to try a replacement cable. -
Disc utility can not verify my internal harddrive
My disc utility cannot verify the internal harddrive and says that it needs to be repaired, however the repair button is greyed out. I have been told that I need the install a disc to repair the harddrive, my computer is running 10.4 Tiger, can I buy a 10.5 Leopard disc to install and repair the harddrive? or does it have to be the original 10.4 disc which unfortunately I no longer have? if so do you know where I can buy a 10.4 disc?
ThanksHi Rainbow King, and a warm welcome to the forums!
It's supposed to be OK to use a Leopard Install Disk to Repair Tiger HDDs, (though not Repair Permissions with it), but I've had real problems when I did.
Other options are...
A. Unfortunately, Disk Utility can't fix all that much, your best bet is DiskWarrior from Alsoft, you'll need the CD to boot from if you don't have another boot drive...
http://www.alsoft.com/DiskWarrior/
B. Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot.
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.
C. Tough without the Tiger Disk problems, but try fsck...
To use fsck, you must run it from the command line. Unlike using your mouse to open an application to do something, you'll need to type a text command at the prompt (#) to tell fsck what to do. The Terminal application (/Applications/Utilities) and single-user mode are two examples of command-line interfaces in which you can type such commands. To use fsck:
1. Start up your computer in single-user mode to reach the command line. Hold CMD+s keys down at bootup. Note: If necessary, perform a forced restart as described in the Emergency Troubleshooting Handbook that came with your computer. On desktop computers, you can do this by pressing the reset/interrupt button (if there is one) or holding down the power button for several seconds. On portable computers, simultaneously press the Command-Control-power keys. If your portable computer doesn't restart with this method, you may need to reset the Power Manager.
2. At the command-line prompt, type /sbin/fsck -fy
(SPACE between fsck AND -fy important)
3. Press Return. fsck will go through five "phases" and then return information about your disk's use and fragmentation. Once it finishes, it'll display this message if no issue is found:
The volume (nameofvolume) appears to be OK If fsck found issues and has altered, repaired, or fixed anything, it will display this message: *** FILE SYSTEM WAS MODIFIED *** Important: If this message appears, repeat the fsck command you typed in step 2 until fsck tells you that your volume appears to be OK (first-pass repairs may uncover additional issues, so this is a normal thing to do).
4. When fsck reports that your volume is OK, type reboot at the prompt and then press Return.
http://docs.info.apple.com/article.html?artnum=106214
Then Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes. -
Exchanging the internal Harddrive of an iMac 20"
Has anybody ever exchanged the internal Harddrive of an intel based iMac 20"? I would like to replace the internal 250GB by a 500GB. I have heard it would be rather simple with an 24" iMac and more sophisticated with an 20" and 17" iMac.
Can anybody help on that issue? Any tips or experiences?
I do not care about any loss of warranty and I am quite familiar with working with hardware.
Thx for your help!Hello Thomas
Have a look at this:
http://www.baconeggs.co.uk/images/dmm/iMacEarly_200620.pdf
Be patient it takes a bit to load, save or print it after you get it open.
Dennis
17" iMac Intel Core Duo - 1.5GB Ram - Mac OS X (10.4.9) - Maxtor 300GB FireWire - Creative Inspire 2.1 - 2G Nano -
Attatching internal harddrives to my Mac-using Firewire 800 or Esata
I would like to attach internal harddrives to my mac-book pro so that I can back up work, large files from video / raw pictures, etc. I have heard people doing this with 7200 rpm internal drives. How would I connect them to my Mac?
The solutions such as VANTEC NexStar NST-D200SU Plastic 2.5" & 3.5" USB2.0 seem to have a lot of overheating issues, and the firewire hard drives that are for sale are a bit expensive considering how much data I want to back up.
Any suggestions, or bite the bullet and spend the $$ on the more expensive solutions? Thanks,You cannot install additional hard drives inside a MBP, so I'm assuming you mean external drives. See the following:
Basic Backup
Get an external drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
Backuplist
Carbon Copy Cloner
Data Backup
Deja Vu
iBackup
JaBack
Silver Keeper
MimMac
Retrospect
Super Flexible File Synchronizer
SuperDuper!
Synchronize Pro! X
SyncTwoFolders
Synk Pro
Synk Standard
Tri-Backup
Visit The XLab FAQs and read the FAQ on backup and restore. Also read How to Back Up and Restore Your Files.
Although you can buy a complete external drive system, you can also put one together if you are so inclined. It's relatively easy and only requires a Phillips head screwdriver (typically.) You can purchase hard drives separately. This gives you an opportunity to shop for the best prices on a hard drive of your choice. Reliable brands include Seagate, Hitachi, Western Digital, Toshiba, and Fujitsu. You can find reviews and benchmarks on many drives at Storage Review.
Enclosures for FireWire and USB are readily available. You can find only FireWire enclosures, only USB enclosures, and enclosures that feature multiple ports. I would stress getting enclosures that use the Oxford chipsets especially for Firewire drives (911, 921, 922, for example.) You can find enclosures at places such as;
Cool Drives
OWC
WiebeTech
Firewire Direct
California Drives
NewEgg
All you need do is remove a case cover, mount the hard drive in the enclosure and connect the cables, then re-attach the case cover. Usually the only tool required is a small or medium Phillips screwdriver.
Unfortunately, I have no idea where you would purchase any of the above in Cambodia. -
G5 randomly ejecting second internal harddrive 5 mins after startup?
I recently upgraded my G5 from tiger to leapoard to make it compatible with my iphone4. For some reason it has now started ejecting my second internal harddrive containing movies and pictures 5 minuts or so aftr start up. Before that time the drive works perfectly.
The computer is fully updated to 10.5.8.Do a little at a time and keep your fingers crossed. You may have to remount and retry several times. Of course, with it not staying mounted very long, larger files may be problematic. I would hook up an external drive, copy from the failing drive to the other internal for maximum speed, then copy from the other internal to the external until I got everything off. Best to get a FireWire external (most useful, but USB is OK) SATA enclosure or drive dock, put a bare drive into it so that when you are done, you can drop the bare drive into the machine in place of the failing drive.
Oh, and one other thing I might try at some point is to shut down, remove and replace the SATA connectors to the failing drive to clean them up and then reboot. I would not, however, do this until I had gotten the most important files off the failing drive.
Then, once you have done that, you might want to get another couple of bare drives and use something like SuperDuper! or Carbon Copy Cloner (sorry, no handy link in my bad-o-tricks) to clone and keep current backups of the internal drives. A SATA dock (toaster) might be just the thing, rather than a plain enclosure, certainly faster to deal with when you are swapping multiple drives around. The linked example is a Quad interface that has actually come down in price the past couple of months. -
Will moving my video events to internal harddrive speed up editing?
I want to move my final cut pro x projects and events over to internal harddrive and use proxy mode. Is this the right thing to do to speed up performance?
Thanks.Paul Cuciti wrote:
The short answer is yes. But if you have a FAST external hard drive, you may prefer that.
The short answer is NO - unless the internal drive is different to your system drive and RAID?
A fast external HD is the way to go. Your projects, media and events should all go on the expernal drive (formatted Mac OS Extended) and of course, Firewire 800.
Andy -
Adding another internal HardDrive
How would I go about installing another internal harddrive into my new imac? I recently perchased my imac because my old windows XP computer became "unusable". I want to use this hard drive on this imac, so how would I go about installing it inside?
- or is it impossible? -It would be very helpful if you told us what iMac you have. If you want to add a second drive in addition to the one already inside the answer is no you cannot do that. If you want to re-use the XP hard drive your best bet would be to get an enclosure and connect it via USB or FW800, however remember you will probably have to reformat it to make it useable.
Regards,
Roger -
Compatible internal Harddrives?
What models fit the iMac G5 (the one that came out RIGHT before isight)?
I want to get a 500GB harddrive, i'm already running out of room on my 250. If there isn't any compatible 500GB internal harddrives, can anyone suggest a good external one (250 - 500GB)?Just about any SATA drive will work. I have this Western Digital that I installed about a month ago. Best Buy had it on sale for $99 with no rebates, so I jumped at it.
Be careful. There are several drives from Seagate - normally a top brand - that ship with Spread Spectrum Clocking (SSC) enabled which renders the drive useless in a Mac. OWC disables SSC before shipping, but that might not be enough. There is also a problem with firmware that may also cause the drive to not spool up from sleep. Check out this thread for details on the firmware issue.
I say avoid Seagate drives for now - as good as they are. I know Western Digital and Maxtor drives were working fine at last check.
There is also no limit to the size of HD that you install according to OWC. That was when the 500GB drives were the largest available. I would check before getting one of the recently announced 750GB monsters.
Wow!
Maybe you are looking for
-
IMac to Win7 PC -- Help please!
Hello to all, I have iTunes 11.0.1.12 (x64) on my iMac and iTunes 11.0.1.12 (x86) on my Win7 PC and i am trying to setup Home Sharing...the problem is that my Mac's iTunes can see the WinPC's Library, both in normal sharing and Home Sharing but the W
-
JDK 5 for 64 bit for B1ic installation on windows server 2008 64 bit
Hello to All, I want to download jdk 5 for X64 ,i have searched lot of time on gooogle and other place but not find for 64 bit. my one of the client working on windows server 2008 with 64 bit and i want to install integration component(SAP 8.81 PL 00
-
I need to delete the photo album on my iphone 4, I went though all of the steps on the support page but the only place the pics were deleted were on my pc not my phone. When I selected selected alnums, it only gave the options of albums on my pc. it
-
Hi, I would like to hear from experts as to what is the best way forward with security setup for a new EPM implementation on 11.1.2.2. We have all products in our environment from DRM, HFM, Planning Essbase etc and most of them are also SSO enabled.
-
Open with External Editor Profile sRGB instead of Adobe RGB
Hi, I know in the export presets I can adjust what profile aperture will use. But what about when I open with External Editor. I like doing this because I can open my image in PhotoShop make my adjustments then save it and have aperture manage my fil