URGENT: Is Weblogic 10.3.4 not supported for OIM 11g ?

Hi Everyone,
Is Weblogic 10.3.4 not supported for OIM 11g ?
I installe & configured all IAM suite components (OAM,OIM,OAAM,SOA) on WLS 10.3.4. I am able to start all servers including OIM. However it is unable deploy "oim". After doing some research , I found below URL which tells WLS 10.3.4 is NOT SUPPORTED for OIM 11g.
Not able start oim_server1, could not open oim url
If that is true, Is there anyway to downgrade Weblogic to 10.3.3 ?
Please provide your inputs and suggestions.
Thanks
GK

No. 11G has been released with all type of supporting infrastructure components to be residing at the same level (i.e 11G only). So you would not be able to just downgrade weblogic to any lower versions.

Similar Messages

  • It is true that Weblogic 10.3 does not support the 1.2.840.113549.1.1.11?

    It is true that Weblogic 10.3 does not support the 1.2.840.113549.1.1.11. - SHA1 with RSA signature encryption?

    Refer: Re: SSL not working with 10.3 and jdk 1.6.0_13
    -Akshay

  • IIS proxy 5.1 and Weblogic 6.1 does not support sticky session

    Dear Sir,
    Our system is migrating from Weblogic 5.1 to Weblogic 6.1. After testing on
    development environment, it is found that IIS proxy for 5.1 plug-in and Weblogic
    6.1 server is perfect match for our case. Since our appliction system hit some
    bugs of IIS proxy for 6.1. In development environment, one IIS match with one
    Weblogic.
    During production launch, another problem found. It seems that IIS proxy 5.1
    plug-in with Weblogic 6.1 does not support the sticky load balancing. A sticky
    service is one where a client sends its requests to the same instance and those
    requests are not redirected to other instances. In production, two IIS match with
    two Weblogic. Below is
    #WebLogicHost=10.0.3.12
    #WebLogicPort=8012
    WebLogicCluster=10.0.3.12:8012,10.0.3.13:8012
    COnnectionTimeoutSecs=10
    ConnectionRetrySecs=2
    ErrorPage=https://www.xxxx.com/eBank/sysnotready.htm
    CookieName=eBankingWebLogicSession
    Anyone have idea on out case?
    Thanks,
    KAI

    My test was with 6.1 SP3.
    The way to tell is by analyzing the cookie(JSESSIONID).
    Perhaps the behaviour changed post SP1. I can't say for sure.
    Eric
    "Gary Rudolph" <[email protected]> wrote in message
    news:[email protected]...
    Is that entirely true concerning you don't need the persistence set to
    replicated in the weblogic.xml to gain sticky load balancing?
    The reason I ask was that in our situation sticky wouldn't work without
    having the persistence set to replicated. This was with NSAPI and WLS 6.1
    SP1. The weblogic servers were configured in a weblogic cluster. So..based
    on this statement we should not have needed to set the persistence, but in
    practice we did for it to work.
    Gary
    "Eric Gross" <[email protected]> wrote in message
    news:[email protected]...
    I just checked, and you are correct. You just need to have clustering
    enabled in 6.1. You do not necessarily need to have persistence set to
    replicated.
    Of course, you won't get failover, but you will get the sticky load
    balancing.
    Regards,
    Eric
    "Ricky Wong" <[email protected]> wrote in message
    news:[email protected]...
    Why do we need to set session persistence to replicate in order to
    perform
    sticky load balancing ? There is no such requirement in WebLogic 5.1.
    As
    far
    as I know, the IIS plugin simply interprets the value of the sessioncookie,
    which should be embedded with the application server address, then
    forward
    the request to that particular application server.
    We didn't use session replication in our environment because not allsession
    variables are serializable.
    "Eric Gross" <[email protected]> wrote in message
    news:[email protected]...
    The problem you mentionned in the other newsgroup post has been
    fixed
    and
    will be in SP4. If you are in production or nearing production and
    need
    a
    resolution now, then please open a case with support.
    You should not need any other parameters to do the load balancing.
    But
    to
    have the sticky load balancing, you must make sure you have session
    persistence set to replicated for the webapp in question.
    I'm not sure I am understanding your 3rd question.
    In any case, my advice is to either wait for SP4 to bereleased(scheduled
    sometime this month) or if you really need to go into production
    soon,
    contact support to obtain the latest IIS plugin.
    Regards,
    Eric
    "Mike" <[email protected]> wrote in message
    news:[email protected]...
    Dear Eric,
    Thanks very much for you kindly information, but we still have thefollowing issues
    regarding the WL IIS proxy:
    1. We have already tried the IIS proxy that comes with WL6.1 SP3.However, the
    result from that version of IIS proxy is not satisfactory, as weexperienced cases
    where the web page is not displayed correctly (as in
    http://newsgroups.bea.com/cgi-bin/dnewsweb?cmd=article&group=weblogic.develo
    per.interest.plug-in&item=994&utag=).
    If there is any IIS proxy released after WL6.1 SP3, Could you
    kindly
    give
    us
    a pointer to the plugin?
    2. In WL5.1 case, we are only required to have "WebLogicCluster"
    parameter
    set
    to two weblogic servers in order use the load balancing features.
    In
    WL6.1, we
    do not come across any additional settings required to support
    load
    balancing.
    Is there any such settings required (e.g. in
    config.xml,weblogic.xml,
    application.xml,
    etc?)
    3. Does WL IIS proxy problem has anything to do with the version
    of
    the
    IIS server/windows
    versions that are using? we have already tried with IIS4 and IIS5
    and
    have
    different
    kinds of issues.
    Thanks in advance for your kind assistance.
    Mike
    "Eric Gross" <[email protected]> wrote:
    Yes, the session format has changed when using clustering and you
    cannot
    use
    the 5.1 plugin to proxy to 6.1.
    What problems did you have using the 6.1 plugin? Maybe you need
    the
    latest
    6.1 plugin.
    Regards,
    Eric
    "KAI" <[email protected]> wrote in message
    news:[email protected]...
    Dear Sir,
    Our system is migrating from Weblogic 5.1 to Weblogic 6.1.
    After
    testing on
    development environment, it is found that IIS proxy for 5.1
    plug-in
    and
    Weblogic
    6.1 server is perfect match for our case. Since our appliction
    system
    hit
    some
    bugs of IIS proxy for 6.1. In development environment, one IIS
    match
    with
    one
    Weblogic.
    During production launch, another problem found. It seems
    that
    IIS
    proxy 5.1
    plug-in with Weblogic 6.1 does not support the sticky load
    balancing.
    A
    sticky
    service is one where a client sends its requests to the same
    instance
    and
    those
    requests are not redirected to other instances. In production,
    two
    IIS
    match with
    two Weblogic. Below is
    #WebLogicHost=10.0.3.12
    #WebLogicPort=8012
    WebLogicCluster=10.0.3.12:8012,10.0.3.13:8012
    COnnectionTimeoutSecs=10
    ConnectionRetrySecs=2
    ErrorPage=https://www.xxxx.com/eBank/sysnotready.htm
    CookieName=eBankingWebLogicSession
    Anyone have idea on out case?
    Thanks,
    KAI

  • Selective XML Index feature is not supported for the current database version , SQL Server Extended Events , Optimizing Reading from XML column datatype

    Team , Thanks for looking into this  ..
    As a last resort on  optimizing my stored procedure ( Below ) i wanted to create a Selective XML index  ( Normal XML indexes doesn't seem to be improving performance as needed ) but i keep getting this error within my stored proc . Selective XML
    Index feature is not supported for the current database version.. How ever
    EXECUTE sys.sp_db_selective_xml_index; return 1 , stating Selective XML Indexes are enabled on my current database .
    Is there ANY alternative way i can optimize below stored proc ?
    Thanks in advance for your response(s) !
    /****** Object: StoredProcedure [dbo].[MN_Process_DDLSchema_Changes] Script Date: 3/11/2015 3:10:42 PM ******/
    SET ANSI_NULLS ON
    GO
    SET QUOTED_IDENTIFIER ON
    GO
    -- EXEC [dbo].[MN_Process_DDLSchema_Changes]
    ALTER PROCEDURE [dbo].[MN_Process_DDLSchema_Changes]
    AS
    BEGIN
    SET NOCOUNT ON --Does'nt have impact ( May be this wont on SQL Server Extended events session's being created on Server(s) , DB's )
    SET TRANSACTION ISOLATION LEVEL READ UNCOMMITTED
    select getdate() as getdate_0
    DECLARE @XML XML , @Prev_Insertion_time DATETIME
    -- Staging Previous Load time for filtering purpose ( Performance optimize while on insert )
    SET @Prev_Insertion_time = (SELECT MAX(EE_Time_Stamp) FROM dbo.MN_DDLSchema_Changes_log ) -- Perf Optimize
    -- PRINT '1'
    CREATE TABLE #Temp
    EventName VARCHAR(100),
    Time_Stamp_EE DATETIME,
    ObjectName VARCHAR(100),
    ObjectType VARCHAR(100),
    DbName VARCHAR(100),
    ddl_Phase VARCHAR(50),
    ClientAppName VARCHAR(2000),
    ClientHostName VARCHAR(100),
    server_instance_name VARCHAR(100),
    ServerPrincipalName VARCHAR(100),
    nt_username varchar(100),
    SqlText NVARCHAR(MAX)
    CREATE TABLE #XML_Hold
    ID INT NOT NULL IDENTITY(1,1) PRIMARY KEY , -- PK necessity for Indexing on XML Col
    BufferXml XML
    select getdate() as getdate_01
    INSERT INTO #XML_Hold (BufferXml)
    SELECT
    CAST(target_data AS XML) AS BufferXml -- Buffer Storage from SQL Extended Event(s) , Looks like there is a limitation with xml size ?? Need to re-search .
    FROM sys.dm_xe_session_targets xet
    INNER JOIN sys.dm_xe_sessions xes
    ON xes.address = xet.event_session_address
    WHERE xes.name = 'Capture DDL Schema Changes' --Ryelugu : 03/05/2015 Session being created withing SQL Server Extended Events
    --RETURN
    --SELECT * FROM #XML_Hold
    select getdate() as getdate_1
    -- 03/10/2015 RYelugu : Error while creating XML Index : Selective XML Index feature is not supported for the current database version
    CREATE SELECTIVE XML INDEX SXI_TimeStamp ON #XML_Hold(BufferXml)
    FOR
    PathTimeStamp ='/RingBufferTarget/event/timestamp' AS XQUERY 'node()'
    --RETURN
    --CREATE PRIMARY XML INDEX [IX_XML_Hold] ON #XML_Hold(BufferXml) -- Ryelugu 03/09/2015 - Primary Index
    --SELECT GETDATE() AS GETDATE_2
    -- RYelugu 03/10/2015 -Creating secondary XML index doesnt make significant improvement at Query Optimizer , Instead creation takes more time , Only primary should be good here
    --CREATE XML INDEX [IX_XML_Hold_values] ON #XML_Hold(BufferXml) -- Ryelugu 03/09/2015 - Primary Index , --There should exists a Primary for a secondary creation
    --USING XML INDEX [IX_XML_Hold]
    ---- FOR VALUE
    -- --FOR PROPERTY
    -- FOR PATH
    --SELECT GETDATE() AS GETDATE_3
    --PRINT '2'
    -- RETURN
    SELECT GETDATE() GETDATE_3
    INSERT INTO #Temp
    EventName ,
    Time_Stamp_EE ,
    ObjectName ,
    ObjectType,
    DbName ,
    ddl_Phase ,
    ClientAppName ,
    ClientHostName,
    server_instance_name,
    nt_username,
    ServerPrincipalName ,
    SqlText
    SELECT
    p.q.value('@name[1]','varchar(100)') AS eventname,
    p.q.value('@timestamp[1]','datetime') AS timestampvalue,
    p.q.value('(./data[@name="object_name"]/value)[1]','varchar(100)') AS objectname,
    p.q.value('(./data[@name="object_type"]/text)[1]','varchar(100)') AS ObjectType,
    p.q.value('(./action[@name="database_name"]/value)[1]','varchar(100)') AS databasename,
    p.q.value('(./data[@name="ddl_phase"]/text)[1]','varchar(100)') AS ddl_phase,
    p.q.value('(./action[@name="client_app_name"]/value)[1]','varchar(100)') AS clientappname,
    p.q.value('(./action[@name="client_hostname"]/value)[1]','varchar(100)') AS clienthostname,
    p.q.value('(./action[@name="server_instance_name"]/value)[1]','varchar(100)') AS server_instance_name,
    p.q.value('(./action[@name="nt_username"]/value)[1]','varchar(100)') AS nt_username,
    p.q.value('(./action[@name="server_principal_name"]/value)[1]','varchar(100)') AS serverprincipalname,
    p.q.value('(./action[@name="sql_text"]/value)[1]','Nvarchar(max)') AS sqltext
    FROM #XML_Hold
    CROSS APPLY BufferXml.nodes('/RingBufferTarget/event')p(q)
    WHERE -- Ryelugu 03/05/2015 - Perf Optimize - Filtering the Buffered XML so as not to lookup at previoulsy loaded records into stage table
    p.q.value('@timestamp[1]','datetime') >= ISNULL(@Prev_Insertion_time ,p.q.value('@timestamp[1]','datetime'))
    AND p.q.value('(./data[@name="ddl_phase"]/text)[1]','varchar(100)') ='Commit' --Ryelugu 03/06/2015 - Every Event records a begin version and a commit version into Buffer ( XML ) we need the committed version
    AND p.q.value('(./data[@name="object_type"]/text)[1]','varchar(100)') <> 'STATISTICS' --Ryelugu 03/06/2015 - May be SQL Server Internally Creates Statistics for #Temp tables , we do not want Creation of STATISTICS Statement to be logged
    AND p.q.value('(./data[@name="object_name"]/value)[1]','varchar(100)') NOT LIKE '%#%' -- Any stored proc which creates a temp table within it Extended Event does capture this creation statement SQL as well , we dont need it though
    AND p.q.value('(./action[@name="client_app_name"]/value)[1]','varchar(100)') <> 'Replication Monitor' --Ryelugu : 03/09/2015 We do not want any records being caprutred by Replication Monitor ??
    SELECT GETDATE() GETDATE_4
    -- SELECT * FROM #TEMP
    -- SELECT COUNT(*) FROM #TEMP
    -- SELECT GETDATE()
    -- RETURN
    -- PRINT '3'
    --RETURN
    INSERT INTO [dbo].[MN_DDLSchema_Changes_log]
    [UserName]
    ,[DbName]
    ,[ObjectName]
    ,[client_app_name]
    ,[ClientHostName]
    ,[ServerName]
    ,[SQL_TEXT]
    ,[EE_Time_Stamp]
    ,[Event_Name]
    SELECT
    CASE WHEN T.nt_username IS NULL OR LEN(T.nt_username) = 0 THEN t.ServerPrincipalName
    ELSE T.nt_username
    END
    ,T.DbName
    ,T.objectname
    ,T.clientappname
    ,t.ClientHostName
    ,T.server_instance_name
    ,T.sqltext
    ,T.Time_Stamp_EE
    ,T.eventname
    FROM
    #TEMP T
    /** -- RYelugu 03/06/2015 - Filters are now being applied directly while retrieving records from BUFFER or on XML
    -- Ryelugu 03/15/2015 - More filters are likely to be added on further testing
    WHERE ddl_Phase ='Commit'
    AND ObjectType <> 'STATISTICS' --Ryelugu 03/06/2015 - May be SQL Server Internally Creates Statistics for #Temp tables , we do not want Creation of STATISTICS Statement to be logged
    AND ObjectName NOT LIKE '%#%' -- Any stored proc which creates a temp table within it Extended Event does capture this creation statement SQL as well , we dont need it though
    AND T.Time_Stamp_EE >= @Prev_Insertion_time --Ryelugu 03/05/2015 - Performance Optimize
    AND NOT EXISTS ( SELECT 1 FROM [dbo].[MN_DDLSchema_Changes_log] MN
    WHERE MN.[ServerName] = T.server_instance_name -- Ryelugu Server Name needes to be added on to to xml ( Events in session )
    AND MN.[DbName] = T.DbName
    AND MN.[Event_Name] = T.EventName
    AND MN.[ObjectName]= T.ObjectName
    AND MN.[EE_Time_Stamp] = T.Time_Stamp_EE
    AND MN.[SQL_TEXT] =T.SqlText -- Ryelugu 03/05/2015 This is a comparision Metric as well , But needs to decide on
    -- Peformance Factor here , Will take advise from Lance if comparision on varchar(max) is a vital idea
    --SELECT GETDATE()
    --PRINT '4'
    --RETURN
    SELECT
    top 100
    [EE_Time_Stamp]
    ,[ServerName]
    ,[DbName]
    ,[Event_Name]
    ,[ObjectName]
    ,[UserName]
    ,[SQL_TEXT]
    ,[client_app_name]
    ,[Created_Date]
    ,[ClientHostName]
    FROM
    [dbo].[MN_DDLSchema_Changes_log]
    ORDER BY [EE_Time_Stamp] desc
    -- select getdate()
    -- ** DELETE EVENTS after logging into Physical table
    -- NEED TO Identify if this @XML can be updated into physical system table such that previously loaded events are left untoched
    -- SET @XML.modify('delete /event/class/.[@timestamp="2015-03-06T13:01:19.020Z"]')
    -- SELECT @XML
    SELECT GETDATE() GETDATE_5
    END
    GO
    Rajkumar Yelugu

    @@Version : ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
    Microsoft SQL Server 2012 - 11.0.5058.0 (X64)
        May 14 2014 18:34:29
        Copyright (c) Microsoft Corporation
        Developer Edition (64-bit) on Windows NT 6.2 <X64> (Build 9200: ) (Hypervisor)
    (1 row(s) affected)
    Compatibility level is set to 110 .
    One of the limitation states - XML columns with a depth of more than 128 nested nodes
    How do i verify this ? Thanks .
    Rajkumar Yelugu

  • The trial period for this product has expired or Secure Store Shared Service is not supported for this SKU - SharePoint Foundation 2013

    After sucessfulling installing the SharePoint Foundation 2013, when i try to access the Secure Stored Service Application i get the below error
    11/16/2012 18:13:02.84  w3wp.exe (0x1774)                        0x15E8 Secure Store Service         
     Secure Store                   g0n6 High     The trial period for this product has expired or this feature is not supported in this SKU. b3b6e19b-7de2-e016-ad32-0fc975829ef0
    11/16/2012 18:13:02.84  w3wp.exe (0x1774)                        0x15E8 SharePoint Foundation        
     General                        8nca Medium   Application error when access /_admin/sssvc/ManageSSSvcApplication.aspx, Error=The
    trial period for this product has expired or Secure Store Shared Service is not supported for this SKU.   at Microsoft.Office.SecureStoreService.Server.SecureStoreServiceApplicationProxy.Execute[T](String operationName, Boolean validateCanary, ExecuteDelegate`1
    operation)     at Microsoft.Office.SecureStoreService.Server.SecureStoreServiceApplicationProxy.IsMasterSecretKeyPopulated()     at Microsoft.Office.SharePoint.ClientExtensions.SecureStoreAdministration.SSSAdminHelper.EnsurePrerequisite(SecureStoreServiceApplicationProxy
    proxy, String& errorMessage)     at Microsoft.Office.SharePoint.ClientExtensions.SecureStoreAdministration.ManageSSSvcApplication.InitializeGridView()     at Microsoft.Office.SharePoi... b3b6e19b-7de2-e016-ad32-0fc975829ef0
    11/16/2012 18:13:02.84* w3wp.exe (0x1774)                        0x15E8 SharePoint Foundation        
     General                        8nca Medium   ...nt.ClientExtensions.SecureStoreAdministration.ManageSSSvcApplication.OnLoad(EventArgs
    e)     at System.Web.UI.Control.LoadRecursive()     at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) b3b6e19b-7de2-e016-ad32-0fc975829ef0
    11/16/2012 18:13:02.84  w3wp.exe (0x1774)                        0x15E8 SharePoint Foundation        
     Runtime                        tkau Unexpected Microsoft.Office.Server.ProductExpiredException: The trial period for this product
    has expired or Secure Store Shared Service is not supported for this SKU.    at Microsoft.Office.SecureStoreService.Server.SecureStoreServiceApplicationProxy.Execute[T](String operationName, Boolean validateCanary, ExecuteDelegate`1 operation)    
    at Microsoft.Office.SecureStoreService.Server.SecureStoreServiceApplicationProxy.IsMasterSecretKeyPopulated()     at Microsoft.Office.SharePoint.ClientExtensions.SecureStoreAdministration.SSSAdminHelper.EnsurePrerequisite(SecureStoreServiceApplicationProxy
    proxy, String& errorMessage)     at Microsoft.Office.SharePoint.ClientExtensions.SecureStoreAdministration.ManageSSSvcApplication.InitializeGridView()     at Microsoft.Office.SharePoint.ClientExtensions.SecureSto... b3b6e19b-7de2-e016-ad32-0fc975829ef0
    11/16/2012 18:13:02.84* w3wp.exe (0x1774)                        0x15E8 SharePoint Foundation        
     Runtime                        tkau Unexpected ...reAdministration.ManageSSSvcApplication.OnLoad(EventArgs e)    
    at System.Web.UI.Control.LoadRecursive()     at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) b3b6e19b-7de2-e016-ad32-0fc975829ef0
    11/16/2012 18:13:02.84  w3wp.exe (0x1774)                        0x15E8 SharePoint Foundation        
     General                        ajlz0 High     Getting Error Message for Exception System.Web.HttpUnhandledException
    (0x80004005): Exception of type 'System.Web.HttpUnhandledException' was thrown. ---> Microsoft.Office.Server.ProductExpiredException: The trial period for this product has expired or Secure Store Shared Service is not supported for this SKU.    
    at Microsoft.Office.SecureStoreService.Server.SecureStoreServiceApplicationProxy.Execute[T](String operationName, Boolean validateCanary, ExecuteDelegate`1 operation)     at Microsoft.Office.SecureStoreService.Server.SecureStoreServiceApplicationProxy.IsMasterSecretKeyPopulated()    
    at Microsoft.Office.SharePoint.ClientExtensions.SecureStoreAdministration.SSSAdminHelper.EnsurePrerequisite(SecureStoreServiceApplicationProxy proxy, String& errorMessage)     at Microsoft.Office.Sha... b3b6e19b-7de2-e016-ad32-0fc975829ef0
    11/16/2012 18:13:02.84* w3wp.exe (0x1774)                        0x15E8 SharePoint Foundation        
     General                        ajlz0 High     ...rePoint.ClientExtensions.SecureStoreAdministration.ManageSSSvcApplication.InitializeGridView()    
    at Microsoft.Office.SharePoint.ClientExtensions.SecureStoreAdministration.ManageSSSvcApplication.OnLoad(EventArgs e)     at System.Web.UI.Control.LoadRecursive()     at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint,
    Boolean includeStagesAfterAsyncPoint)     at System.Web.UI.Page.HandleError(Exception e)     at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)    
    at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)     at System.Web.UI.Page.ProcessRequest()     at System.Web.UI.Page.ProcessRequest(HttpContext context)    
    at System.Web.Htt... b3b6e19b-7de2-e016-ad32-0fc975829ef0
    11/16/2012 18:13:02.84* w3wp.exe (0x1774)                        0x15E8 SharePoint Foundation        
     General                        ajlz0 High     ...pApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()    
    at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) b3b6e19b-7de2-e016-ad32-0fc975829ef0
    11/16/2012 18:13:02.86  w3wp.exe (0x1774)                        0x15E8 SharePoint Foundation        
     General                        aat87 Monitorable   b3b6e19b-7de2-e016-ad32-0fc975829ef0
    Is it a bug or any issue in configuration?
    Raghavendra Shanbhag | Blog: http://moss-solutions.blogspot.com
    Please click "Propose As Answer " if a post solves your problem or "Vote As Helpful" if a post has been useful to you.
    Disclaimer: This posting is provided "AS IS" with no warranties.

    Hello
    something should be related wuith this service, take a llok at my visual studio output whne I try to deplay and autohosted sharepoint app: (anyone can help)
    1>------ Build started: Project: MySharePointAppWeb, Configuration: Debug Any CPU ------
    1>  MySharePointAppWeb -> C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\bin\MySharePointAppWeb.dll
    2>------ Build started: Project: MySharePointApp, Configuration: Debug Any CPU ------
    2>C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\Web.Debug.config(34,4): warning : No element in the source document matches '/configuration/connectionStrings'
    2>  Transformed Web.config using C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\Web.Debug.config into obj\Debug\TransformWebConfig\transformed\Web.config.
    2>  Auto ConnectionString Transformed obj\Debug\TransformWebConfig\transformed\Web.config into obj\Debug\CSAutoParameterize\transformed\Web.config.
    2>  Copying all files to temporary location below for package/publish:
    2>  obj\Debug\Package\PackageTmp.
    2>  Packaging into C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointApp\obj\WebDeploy\MySharePointApp.Web.zip.
    2>  Adding sitemanifest (sitemanifest).
    2>  Adding IIS Application (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp)
    2>  Creating application (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp)
    2>  Adding virtual path (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp)
    2>  Adding directory (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp).
    2>  Adding directory (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\bin).
    2>  Adding directory (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\bin\en).
    2>  Adding file (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\bin\en\Microsoft.IdentityModel.resources.dll).
    2>  Adding file (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\bin\Microsoft.IdentityModel.dll).
    2>  Adding file (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\bin\Microsoft.IdentityModel.Extensions.dll).
    2>  Adding file (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\bin\Microsoft.SharePoint.Client.dll).
    2>  Adding file (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\bin\Microsoft.SharePoint.Client.Runtime.dll).
    2>  Adding file (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\bin\MySharePointAppWeb.dll).
    2>  Adding file (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\bin\MySharePointAppWeb.pdb).
    2>  Adding file (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\packages.config).
    2>  Adding directory (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\Pages).
    2>  Adding file (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\Pages\Default.aspx).
    2>  Adding directory (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\Scripts).
    2>  Adding file (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\Scripts\jquery-1.7.1.js).
    2>  Adding file (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\Scripts\jquery-1.7.1.min.js).
    2>  Adding file (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\Scripts\_references.js).
    2>  Adding file (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\Web.config).
    2>  Adding ACL's for path (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp)
    2>  Adding ACL's for path (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp)
    2>  Adding declared parameter 'IIS Web Application Name'.
    2>  Package "MySharePointApp.Web.zip" is successfully created as single file at the following location:
    2>  file:///C:/_works/visual%20studio%202012/Projects/MySharePointApp/MySharePointApp/obj/WebDeploy
    2>  To get the instructions on how to deploy the web package please visit the following link:
    2>  http://go.microsoft.com/fwlink/?LinkId=124618
    2>  Sample script for deploying this package is generated at the following location:
    2>  C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointApp\obj\WebDeploy\MySharePointApp.Web.deploy.cmd
    2>  For this sample script, you can change the deploy parameters by changing the following file:
    2>  C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointApp\obj\WebDeploy\MySharePointApp.Web.SetParameters.xml
    2>  Successfully created package at: C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointApp\bin\Debug\app.publish\1.0.0.0\MySharePointApp.app
    3>------ Deploy started: Project: MySharePointApp, Configuration: Debug Any CPU ------
    3>Active Deployment Configuration: Deploy App for SharePoint
    3>Uninstall app for SharePoint:
    3>  Skipping the uninstall step because the app for SharePoint is not installed on the server.
    3>Install app for SharePoint:
    3>  Uploading the app for SharePoint...
    3>  Creating a trusted root authority in SharePoint for IIS Express.
    3>  Installation is in progress (00:00:00)
    3>  Installation is in progress (00:00:01)
    3>  Installation is in progress (00:00:02)
    3>  Installation is in progress (00:00:03)
    3>  Installation is in progress (00:00:05)
    3>  Installation is in progress (00:00:06)
    3>  App failed to install, cleaning up...
    3>  App installation cleanup failed due to errors.  Please see the app on the SharePoint site’s “Site Contents” page for details.
    3>  App installation encountered the following errors:
    3> 
    3>  @"Error 1
    3>        CorrelationId: ceeeafab-3834-40ea-b360-c29d103e2248
    3>        ErrorDetail: The remote hosting service is not configured.
    3>        ErrorType: Configuration
    3>        ErrorTypeName: Configuration
    3>        ExceptionMessage: The trial period for this product has expired or Secure Store Shared Service is not supported for this SKU.
    3>        Source: RemoteWebSite
    3>        SourceName: Remote Web Site Deployment
    3> 
    3>  @"Error 2
    3>        CorrelationId: ceeeafab-3834-40ea-b360-c29d103e2248
    3>        ErrorDetail: The remote hosting service is not configured.
    3>        ErrorType: Configuration
    3>        ErrorTypeName: Configuration
    3>        ExceptionMessage: The trial period for this product has expired or Secure Store Shared Service is not supported for this SKU.
    3>        Source: RemoteWebSite
    3>        SourceName: Remote Web Site Deployment
    3>Error occurred in deployment step 'Install app for SharePoint': Failed to install app for SharePoint. Please see the output window for details.
    ========== Build: 2 succeeded, 0 failed, 0 up-to-date, 0 skipped ==========
    ========== Deploy: 0 succeeded, 1 failed, 0 skipped ==========

  • "error: thread-local storage not supported for this target"

    I have a program that uses the __thread specifier, to be run on a Solaris 9/UltraSprac.
    I am not able to compile it using gcc 3.4.4 or 4.0.4, it emits the msg "error: thread-local storage not supported for this target".
    xz@gamera% gcc -v -Wall -D_REENTRANT -c -o func_stack.o func_stack.c
    Reading specs from /opt/gcc/3.4.4/lib/gcc/sparc-sun-solaris2.8/3.4.4/specs
    Configured with: ../srcdir/configure --prefix=/opt/gcc/3.4.4 --disable-nls
    Thread model: posix
    gcc version 3.4.4
    /opt/gcc/3.4.4/libexec/gcc/sparc-sun-solaris2.8/3.4.4/cc1 -quiet -v -D_REENTRANT -DMESS func_stack.c -quiet -dumpbase func_stack.c -mcpu=v7 -auxbase-strip func_stack.o -Wall -version -o /var/tmp//cc0poHSN.s
    ignoring nonexistent directory "/usr/local/include"
    ignoring nonexistent directory "/opt/gcc/3.4.4/lib/gcc/sparc-sun-solaris2.8/3.4.4/../../../../sparc-sun-solaris2.8/include"
    #include "..." search starts here:
    #include <...> search starts here:
    /opt/gcc/3.4.4/include
    /opt/gcc/3.4.4/lib/gcc/sparc-sun-solaris2.8/3.4.4/include
    /usr/include
    End of search list.
    GNU C version 3.4.4 (sparc-sun-solaris2.8)
            compiled by GNU C version 3.4.4.
    GGC heuristics: --param ggc-min-expand=100 --param ggc-min-heapsize=131072
    func_stack.c:16: error: thread-local storage not supported for this target
    func_stack.c:17: error: thread-local storage not supported for this target
    func_stack.c:19: error: thread-local storage not supported for this target
    xs@gamera% gcc -v -D_REENTRANT  -c -o func_stack.o func_stack.c
    Using built-in specs.
    Target: sparc-sun-solaris2.9
    Configured with: /net/clpt-v490-0/export/data/bldmstr/20070711_mars_gcc/src/configure --prefix=/usr/sfw --enable-shared --with-system-zlib --enable-checking=release --disable-libmudflap --enable-languages=c,c++ --enable-version-specific-runtime-libs --with-cpu=v9 --with-ld=/usr/ccs/bin/ld --without-gnu-ld
    Thread model: posix
    gcc version 4.0.4 (gccfss)
    /pkg/gcc/4.0.4/bin/../libexec/gcc/sparc-sun-solaris2.9/4.0.4/cc1 -quiet -v -I. -iprefix /pkg/gcc/4.0.4/bin/../lib/gcc/sparc-sun-solaris2.9/4.0.4/ -D__sparcv8 -D_REENTRANT -DMESS func_stack.c -quiet -dumpbase func_stack.c -mcpu=v9 -auxbase-strip func_stack.o -version -m32 -o /tmp/ccjsdswh.s -r /tmp/cc2w4ZRo.ir
    ignoring nonexistent directory "/pkg/gcc/4.0.4/bin/../lib/gcc/sparc-sun-solaris2.9/4.0.4/../../../../sparc-sun-solaris2.9/include"
    ignoring nonexistent directory "/usr/local/include"
    ignoring nonexistent directory "/usr/sfw/lib/gcc/sparc-sun-solaris2.9/4.0.4/include"
    ignoring nonexistent directory "/usr/sfw/lib/../sparc-sun-solaris2.9/include"
    #include "..." search starts here:
    #include <...> search starts here:
    /pkg/gcc/4.0.4/bin/../lib/gcc/sparc-sun-solaris2.9/4.0.4/include
    /usr/sfw/include
    /usr/include
    End of search list.
    GNU C version 4.0.4 (gccfss) (sparc-sun-solaris2.9)
            compiled by GNU C version 4.0.4 (gccfss).
    GGC heuristics: --param ggc-min-expand=100 --param ggc-min-heapsize=131072
    func_stack.c:16: error: thread-local storage not supported for this target
    func_stack.c:17: error: thread-local storage not supported for this target
    func_stack.c:19: error: thread-local storage not supported for this targetJust as comparison, the corresponding output of compiling another file which does not have __thread declaration is as follows:
    xz@gamera% gcc -v -Wall -D_REENTRANT -c -o common.o common.c
    Reading specs from /opt/gcc/3.4.4/lib/gcc/sparc-sun-solaris2.8/3.4.4/specs
    Configured with: ../srcdir/configure --prefix=/opt/gcc/3.4.4 --disable-nls
    Thread model: posix
    gcc version 3.4.4
    /opt/gcc/3.4.4/libexec/gcc/sparc-sun-solaris2.8/3.4.4/cc1 -quiet -v -D_REENTRANT -DMESS common.c -quiet -dumpbase common.c -mcpu=v7 -auxbase-strip common.o -Wall -version -o /var/tmp//cc4VxrLz.s
    ignoring nonexistent directory "/usr/local/include"
    ignoring nonexistent directory "/opt/gcc/3.4.4/lib/gcc/sparc-sun-solaris2.8/3.4.4/../../../../sparc-sun-solaris2.8/include"
    #include "..." search starts here:
    #include <...> search starts here:
    /opt/gcc/3.4.4/include
    /opt/gcc/3.4.4/lib/gcc/sparc-sun-solaris2.8/3.4.4/include
    /usr/include
    End of search list.
    GNU C version 3.4.4 (sparc-sun-solaris2.8)
            compiled by GNU C version 3.4.4.
    GGC heuristics: --param ggc-min-expand=100 --param ggc-min-heapsize=131072
    /usr/ccs/bin/as -V -Qy -s -xarch=v8 -o common.o /var/tmp//cc4VxrLz.s
    /usr/ccs/bin/as: Sun WorkShop 6 update 2 Compiler Common 6.2 Solaris_9_CBE 2001/04/02Note that the last 2 lines seem to suggest that a Sun assembler is used as the back-end of gcc. I am not sure whether the failure to compile the first file (with __thread) was due to the incompatibility of this Sun assembler. In the first case, the error msg was emitted before these 2 lines are printed.
    I further read a post about gcc 3.3.3's inability to compile code that has __thread in it, on a HP-UX 11.11: http://forums12.itrc.hp.com/service/forums/questionanswer.do?admit=109447627+1216595175060+28353475&threadId=1148976 The conclusion seems to suggest that "the 2.17 GNU assembler did not support thread local storage" and gcc sees that and thus disallows TLS.
    If the assembler is the culprit, then does anyone know whether this "Sun WorkShop 6 update 2" assembler in my installation can work with TLS? And how come a Sun assembler becomes the back-end of gcc? I read that gas (the GNU assembler) is the default backend of gcc. (How) can one specify the assembler to be used for gcc?
    As an aside, I am able to compile my file on this same Solaris 9/UltraSparc platform using the Sun Studio 12 C Compiler:
    xz@gamera% cc -V -# -D_REENTRANT  -c -o func_stack.o func_stack.c
    cc: Sun C 5.9 SunOS_sparc Patch 124867-01 2007/07/12
    ### Note: NLSPATH = /pkg/SUNWspro/12/prod/bin/../lib/locale/%L/LC_MESSAGES/%N.cat:/pkg/SUNWspro/12/prod/bin/../../lib/locale/%L/LC_MESSAGES/%N.cat
    ###     command line files and options (expanded):
    ### -c -D_REENTRANT  -V func_stack.c -o func_stack.o
    /pkg/SUNWspro/12/prod/bin/acomp -xldscope=global -i func_stack.c -y-fbe -y/pkg/SUNWspro/12/prod/bin/fbe -y-xarch=generic -y-xmemalign=8i -y-o -yfunc_stack.o -y-verbose -y-xthreadvar=no%dynamic -y-comdat -xdbggen=no%stabs+dwarf2+usedonly -V -D_REENTRANT  -m32 -fparam_ir -Qy -D__SunOS_5_9 -D__SUNPRO_C=0x590 -D__SVR4 -D__sun -D__SunOS -D__unix -D__sparc -D__BUILTIN_VA_ARG_INCR -D__C99FEATURES__ -Xa -D__PRAGMA_REDEFINE_EXTNAME -Dunix -Dsun -Dsparc -D__RESTRICT -xc99=%all,no%lib -D__FLT_EVAL_METHOD__=0 -I/pkg/SUNWspro/12/prod/include/cc "-g/pkg/SUNWspro/12/prod/bin/cc -V -D_REENTRANT  -c -o func_stack.o " -fsimple=0 -D__SUN_PREFETCH -destination_ir=yabe
    acomp: Sun C 5.9 SunOS_sparc Patch 124867-01 2007/07/12Interestingly, the output no longer mentions the "/usr/ccs/bin/as: Sun WorkShop 6 update 2" assembler.

    Just as another comparison, I compiled a file without __thread on the Solaris 9/UltraSparc platform using gcc 4.0.4. Not surprisingly it worked. But I no longer see the mention of the Sun assembler as in the case of gcc 3.4.4. Nor did I see the mention of "GNU assembler" as in the case of gcc 4.0.4/Solaris 10/x86. Instead, I saw something called "iropt" and "cg". Does anyone know what they are?
    xz@gamera% gcc -v -Wall -D_REENTRANT -c -o common.o common.c
    Using built-in specs.
    Target: sparc-sun-solaris2.9
    Configured with: /net/clpt-v490-0/export/data/bldmstr/20070711_mars_gcc/src/configure --prefix=/usr/sfw --enable-shared --with-system-zlib --enable-checking=release --disable-libmudflap --enable-languages=c,c++ --enable-version-specific-runtime-libs --with-cpu=v9 --with-ld=/usr/ccs/bin/ld --without-gnu-ld
    Thread model: posix
    gcc version 4.0.4 (gccfss)
    /pkg/gcc/4.0.4/bin/../libexec/gcc/sparc-sun-solaris2.9/4.0.4/cc1 -quiet -v -iprefix /pkg/gcc/4.0.4/bin/../lib/gcc/sparc-sun-solaris2.9/4.0.4/ -D__sparcv8 -D_REENTRANT -DMESS common.c -quiet -dumpbase common.c -mcpu=v9 -auxbase-strip common.o -Wall -version -m32 -o /tmp/ccSGJIDD.s -r /tmp/ccKuJz76.ir
    ignoring nonexistent directory "/pkg/gcc/4.0.4/bin/../lib/gcc/sparc-sun-solaris2.9/4.0.4/../../../../sparc-sun-solaris2.9/include"
    ignoring nonexistent directory "/usr/local/include"
    ignoring nonexistent directory "/usr/sfw/lib/gcc/sparc-sun-solaris2.9/4.0.4/include"
    ignoring nonexistent directory "/usr/sfw/lib/../sparc-sun-solaris2.9/include"
    #include "..." search starts here:
    #include <...> search starts here:
    /pkg/gcc/4.0.4/bin/../lib/gcc/sparc-sun-solaris2.9/4.0.4/include
    /usr/sfw/include
    /usr/include
    End of search list.
    GNU C version 4.0.4 (gccfss) (sparc-sun-solaris2.9)
            compiled by GNU C version 4.0.4 (gccfss).
    GGC heuristics: --param ggc-min-expand=100 --param ggc-min-heapsize=131072
    /pkg/gcc/4.0.4/SUNW0scgfss/4.0.4/prod/bin/iropt -F -xarch=v8plus -xchip=generic -O1 -xvector=no -xbuiltin=%none -xcache=generic -Qy -h_gcc -o /tmp/ccUl4mVM.ircg /tmp/ccKuJz76.ir -N/dev/null -is /tmp/ccSGJIDD.s
    /pkg/gcc/4.0.4/SUNW0scgfss/4.0.4/prod/bin/cg -Qy -xarch=v8plus -xchip=generic -OO0 -T3 -Qiselect-C0 -Qrm:newregman:coalescing=0 -xcode=abs32 -xcache=generic -xmemalign=8i -il /pkg/gcc/4.0.4/bin/../lib/gcc/sparc-sun-solaris2.9/4.0.4//gccbuiltins.il -xvector=no -xthreadvar=no%dynamic -xbuiltin=%none -Qassembler-ounrefsym=0 -Qiselect-T0 -Qassembler-I -Qassembler-U -comdat -h_gcc -is /tmp/ccSGJIDD.s -ir /tmp/ccUl4mVM.ircg -oo common.o

  • Authentication with Edge, weinre is not supported for Fiddler

    Environment
    laptop- laptop Windows 7
    mobile- iOS iPad
    I installed Edge, the iOS client, chrome extension, as well as Fiddler and CharlesProxy. We have an app that requires authentication, and the UN/PW cannot be passed via URL params. I configured the iPad to use a proxy, as detailed in  http://blogs.adobe.com/edgeinspect/2012/05/16/shadow-charles-proxy-virtual-hosts-workflow/  Both proxy apps use port 8888 by default.  The site I am trying to hit is external and not a localhost. Here is what I am seeing so far.
    Using Fiddler, I am able to connect remotely, and essentially, what is shown on the iPad is a mirror of my laptop's chrome browser. The problem is that I am unable to initiate remote inspection using weinre, specifically, under the weinre remote button, my device is not listed
    Using Charles Proxy, again, I can connect remotely, but am unable to get past the authentication screen. However, weinre's remote inspection is working and my device is listed under devices. The request looks correct, but when I try to enter a valid UN/PW in the iPad, an error dialog shows with "server returned incorrect response type [200]".
    How is the correct way to authenticate with Charles? Or is there a way to have weinre attach correctly using Fiddler2?
    TIA.

    Hi Christian,
    The error you saw should only occur for a subscription used with a free trial offer type. Please use the below link to open a support ticket.
    http://azure.microsoft.com/en-us/support/options/
    You can check the following links for similar issues.
    The operation is not supported for your subscription offer type
    Could not submit the request to create database
    DBNAME. The operation is not supported for your subscription offer type
    Thanks,
    Lydia Zhang
    If you have any feedback on our support, please click
    here.
    Lydia Zhang
    TechNet Community Support

  • I am trying to download a free trial of photoshop for my macbook pro and it says there is an error and that the requirements for the new version is not supported for the mac I have. I have looked at the list of requirements but have no idea how to tell wh

    I am trying to download a free trial of photoshop for my macbook pro and it says there is an error and that the requirements for the new version is not supported for the mac I have. I have looked at the list of requirements but have no idea how to tell what I do and do not have?

    Apple Menu --> About this Mac.
    Mylenium

  • I get the error message in QuickTime "operation stopped the operation is not supported for this media" most times when I try and export an .AVI file as something else (.m4v). I have not touched the file in any way (no trimming, clipping or other editing)

    I get the error message in QuickTime "operation stopped the operation is not supported for this media" most times when I try and export an .AVI file as something else (e.g. .m4v). I have not touched the file in any way (no trimming, clipping or other editing), all I want QuickTime to do is export the file in a compressed format. Bizzarely, if I shutdown and open QuickTime many times I can occasionally export a clip as another format (maybe one in 10 times). I have seen that other users have had a similar problem after clipping files in QuickTime but this seems to be a slightly different bug in that all I do is open the file and then try and export the file as is - either way, this is a very annoying bug

    @Z_B-B, thank you for taking the time to respond to my cry for help. However, the link you supplied does not address the problem: I am not trying to export from Final Cut Pro to QuickTime, I am trying to export from QuickTime to the rest of the world (like people's iPhones and Ipads) in .m4v format (so I am not emailing my freinds such huge files).
    If I were to spend hundreds of Dollars on a copy of Final Pro I could export directly from there and not have to bother with QuickTime, but I do not take enough video clips to justify the cost. I must say that I never had any of these problems before I decided to switch from Snow Leopard to Mountai Lion.

  • Is 11.1.2.1 (32 bit) not supported for windows xp professional (SP2)

    Is 11.1.2.1 (32 bit) not supported for windows xp professional (SP2).
    Edited by: 867760 on Aug 18, 2011 3:36 PM

    No, it is not supported as a server.
    Please refer: http://www.oracle.com/technetwork/middleware/bi-foundation/oracle-hyperion-epm-system-certific-131801.xls for supported versions.
    HTH-
    Jasmine.

  • Since Flash CS6 Is not supported for OSX 10.8, can cloud members have Flash CS5?

    Since Flash CS6 Is not supported for OSX 10.8, can cloud members have Flash CS5?
    I see that Flash CS6 is not supported (http://helpx.adobe.com/flash/kb/mountain-lion-support-flash-professional.html ) . My coworkers and I are not able to see some fonts and the colorpickers are not working properly as mentioned at the URL.
    Can you make the previous version of Flash available for download and use with cloud membership just for this OS X 10.8 issue.
    It'd be more of a hassle for us to revert back to an older OS then to just get an extra older version of Flash on our system.
    Thanks ahead,
    -Line

    flash looks like the only adobe victim: http://www.adobe.com/products/creativesuite/faq.html#lion-os

  • Does Weblogic server 9.2 provide support for CRL checking

    Does Weblogic server 9.2 provide support for CRL checking?

    No, but you can create a custom CertPath provider for your own implementation.
    Mike
    Weblogic/J2EE Security Blog: http://monduke.com

  • Not able to create database even with a subscription. (The operation is not supported for your subscription offer type)

    Hi,
    I am trying to create a SQL server database, but are not able to. I get this message: The operation is not supported for your subscription offer type.
    I have to azure accounts and this is only happening in one of them.
    I have created a subscription, but I can see that I have 1250 NOK in credit that is expiring in 29 days.
    Regards
    Christian
    ChristianLLoyd

    Hi Christian,
    The error you saw should only occur for a subscription used with a free trial offer type. Please use the below link to open a support ticket.
    http://azure.microsoft.com/en-us/support/options/
    You can check the following links for similar issues.
    The operation is not supported for your subscription offer type
    Could not submit the request to create database
    DBNAME. The operation is not supported for your subscription offer type
    Thanks,
    Lydia Zhang
    If you have any feedback on our support, please click
    here.
    Lydia Zhang
    TechNet Community Support

  • The requested action is not supported for this object. [message 131-171]

    Hi,
    One user is having the below error message appear when she attempts to print remittances. This has only started happening since yesterday and all other documents are still printing.
    "The requested action is not supported for this object. [message 131-171]"
    Any ideas what could be the problem?
    Regards,
    Mohan

    Hi Johnson,
    I have not tried your suggestion till now as I am waiting for the database copy from my client.
    Just a quick question, As I already mentioned earlier and I also keep getting the issues from the users reporting that the user's get this error only if they print 'remittance advise reports' has multiple invoices.
    The report prints fine if it has single invoice even if it is a check payment.
    Will your suggestions address this as well?
    Regards,
    Mohan

  • ERROR OGG-01148 programming error, data type not supported for column

    I am getting following error when I put null in insert statement
    2011-03-31 18:30:45 ERROR OGG-01148 programming error, data type not supported for column TXID in table advoss.tblaudittrail.
    I am replicating MySQL 5.5.9 to Oracle 11g rel2 via goldengate 11

    I am able to diagnose what is cuasing the problem
    unsigned flag was the culprit of this error
    I am able to insert null after removing unsigned flag.
    thank you very much for your kind support

Maybe you are looking for

  • Field Status review between Dev and Prod.

    Hello All, During solving one of the ticket, I found that there are some difference in selection of some of fields as suppress,optional and compulsory for account groups with screen layout (customers) - (T. Code - OBD2) between Development and Produc

  • Creating  a static method returning Logger Object inside class

    Hello, Instead of creating Logger Instance in every class , can i do like this way by creating a static method in some class returning a Logger object , and using that method for getting instance of Logger in another class through that method Regards

  • Firefox crashes when I pressing Browse button to upload files

    Windows 7 x32 Firefox 10.02 The program constantly crashes when I press Browse button (such as gmail attachments, virustotal programs and so on. ) PS I already cleared registry problems and tried to remove MRU from registry, as was mentioned in this

  • How do I uncompress a photo?

    Hi, I compressed a photo and sent it to a friend from my iphone. The friend wants to increase the size of the photo again, but cannot. I already deleted the original photo. I still have the sent email with the compressed photo. How can i make it big

  • Macbook pro retina 15 with win 7 in boot camp in games becomes hot and low graphics

    hi i have macbook pro retina 15 and i installed win 7 with boot camp but when i want play games the first 2 minutes is good but the next minutes the macbook becomes very hot and graphics going very low i tried osx 10.8  but still not working. i tried