Urgent issue 0HR_PE_01 extracter giving no records

i had installed 0HR_PE_0,but in development RSA3 extractor checker it is showing records and when we transport this in quality server the extractor checker showing 0 records.
We have install standard business conent.
pl. help me for this issuse
Raj

I guess you are using Dev and Qlt system. And you transported the datasources from Dev to Qlt system. Now extarct structure can show the data base don data avilability in corresponding system. It might be the case that Dev system can have data but Qlt does not. Please check.
Regards
Pankaj

Similar Messages

Urgent issue, Suddenly no data is extracted Once I create new infopack

Hi,
I have an urgent issue and need help.
We were loading data after activating business content. Every thing worked fine and the delta load was also smooth.
However, in order to start everything afresh, I deleted all the info package, deleted the "Intialization option for the source system" AND then created my infopackage for Full upload with initialize option.
In this case the extractor didn't find any data. Please see the following log from the monitor "status " Tab.
"No data available
Diagnosis
The data request was a full update.
In this case, the corresponding table in the source system does not
contain any data.
System response
Info IDoc received with status 8.
Procedure
Check the data basis in the source system."
This is not correct since we were loading data ( full and delta ) successfully before and there are data in the system. This is most probably to do with the delta queue initialization in the source system.
We were looading data from datassource 0CRM_SALES_ORDER_I.
Please help, we are really stuck.
Thanks
Arunava

hi Anurava,
take a look oss note 692195, i think authorization issue
Activities : 0CRM_SALES_ACT_1
oss 692195
Question 2 : On executing transaction RSA3 I get records but I find 0
records when I load data from BW request.(No Data Available).
How can I extract data in this case?
Suggestion 2: First check if there are any entries in the table
CRMD_ORDER_INDEX.Only if there are entries in this table you can
extract records.
If this is not the case then,
It is possible that the user does not have sufficient
authorities for extraction of the relevant objects.
Additionally, please review and implement the following notes
615670
161570
150315
618953
If you are in the release 4.0 then
To do BW extraction with the user please see that the following
authorization object exists(display mode is enough):
CRM_ACT, CRM_OPP, CRM_LEAD, CRM_SAO, CRM_SEO, CRM_CO_SE, CRM_CO_SC
CRM_CO_SA, CRM_CON_SE, CRM_CMP, CRM_ORD_OP, CRM_ORD_LP, CRM_ORD_PR
CRM_ORD_OE, CRM_CO_PU, CRM_CO_PD, CRM_ORD_PO
(all these objects are linked to transaction crmd_order).

Urgent issue, BW Data extraction

Hi,
I have an urgent issue and need help.
We were loading data after activating business content. Every thing worked fine and the delta load was also smooth.
However, in order to start everything fresh. I deleted all the info package, deleted the "Intialization option for the source system" AND then created my infopackage for Full upload with initialize option.
In this case the extractor didn't find any data. I though it will bring all the data and this behavious put me in difficult situation. Please note that till this time everything was working fine.
We were looading data from datassource 0CRM_SALES_ORDER_I

Hi Anurava,
What do you mean by <i>"Full upload with initialize"</i>?
I couldn't understand what exaclty you meant by I "deleted all the info package, deleted the "Intialization option for the source system" Are you saying you deleted the requests from your ODS/Cube?
Regards
SS

RSA3 is extracting fine but in BI site Its extracting only 10000 records

Hi Experts,
h4.
I made Generic data-source based on function module. When I am extracting data from this data-source in RSA3 itu2019s fetching all records. Its nearly are 7 lacks records.
h4.
But after replicating this data-source in BI site when I am extracting data from this data source its fetching only 10000 records. What mistake I might be did here or is there is any setting for FM based data source.
Advance thanks

My Issue is in RSA3 datasource is working fine and giving all records but when i am extracting data from same data source in BIW site its giving maximum 10000 records. I am using full load with n selection parameter.
This datasource is based on function module. below is the code of data-source
. * Auxiliary Selection criteria structure
DATA: L_S_SELECT TYPE SRSC_S_SELECT.
Maximum number of lines for DB table
STATICS: S_S_IF TYPE SRSC_S_IF_SIMPLE,
counter
          S_COUNTER_DATAPAKID LIKE SY-TABIX,
cursor
          S_CURSOR TYPE CURSOR.
STATICS: V1 TYPE I,
                  V2 TYPE I.
        TYPES: BEGIN OF ty_data,
           matnr       TYPE matnr,
           MTART       TYPE MTART,
           PARTCODE    TYPE IDNRK,
           WERKS       TYPE WERKS_D,
           quantity    TYPE BGESWERT,
           vrkme       TYPE vrkme,
         END OF ty_data,
         BEGIN OF ty_parts,
           mandt       TYPE mandt,
           matnr       TYPE matnr,
           werks       TYPE werks_d,
           spdpartcode TYPE matnr,
           partcode    TYPE matnr,
           parttext    TYPE maktx,
           quantity    TYPE BGESWERT,
           vrkme       TYPE vrkme,
         END OF ty_parts,
         BEGIN OF ty_partvalue,
           mandt       TYPE mandt,
           regio       TYPE regio,
           spdpartcode TYPE matnr,
           value       TYPE abgergeb,
           waers       TYPE waers,
         END OF ty_partvalue.
DATA: it_mara TYPE STANDARD TABLE OF mara,
        wa_mara TYPE mara,
        it_data TYPE STANDARD TABLE OF ty_data,
        wa_data TYPE ty_data,
        it_t005s TYPE STANDARD TABLE OF t005s,
        wa_t005s TYPE t005s,
        l_index TYPE sy-tabix,
        it_parts TYPE STANDARD TABLE OF ty_parts,
        wa_parts TYPE ty_parts,
        it_partvalue TYPE STANDARD TABLE OF ty_partvalue,
        wa_partvalue TYPE ty_partvalue,
        wa_makl TYPE mkal.
DATA: it_t001w TYPE STANDARD TABLE OF t001w,
        wa_t001w TYPE t001w.
DATA: it_stb TYPE STANDARD TABLE OF stpox,
        wa_stb TYPE stpox,
        it_stb1 TYPE STANDARD TABLE OF stpox,
        wa_stb1 TYPE stpox,
        it_stb2 TYPE STANDARD TABLE OF stpox,
        wa_stb2 TYPE stpox,
        it_stb3 TYPE STANDARD TABLE OF stpox,
        wa_stb3 TYPE stpox.
DATA: it_bom type standard table of EXTRACT_STRUCT,
        wa_bom type EXTRACT_STRUCT.
Select ranges
ranges: L_R_MATNR for MARA-MATNR,
         L_R_MTART for MARA-MTART.
Initialization mode (first call by SAPI) or data transfer mode
(following calls) ?
IF I_INITFLAG = SBIWA_C_FLAG_ON.
Initialization: check input parameters
                buffer input parameters
                prepare data selection
Check DataSource validity
    CASE I_DSOURCE.
      WHEN 'Z_BOM'.
      WHEN OTHERS.
        IF 1 = 2. MESSAGE E009(R3).         ENDIF.
this is a typical log call. Please write every error message like this
        LOG_WRITE 'E'                  "message type
                  'R3'                 "message class
                  '009'                "message number
                  I_DSOURCE   "message variable 1
                  ' '.                 "message variable 2
        RAISE ERROR_PASSED_TO_MESS_HANDLER.
    ENDCASE.
    APPEND LINES OF I_T_SELECT TO S_S_IF-T_SELECT.
Fill parameter buffer for data extraction calls
    S_S_IF-REQUNR    = I_REQUNR.
    S_S_IF-DSOURCE   = I_DSOURCE.
    S_S_IF-MAXSIZE   = I_MAXSIZE.
Fill field list table for an optimized select statement
(in case that there is no 1:1 relation between InfoSource fields
and database table fields this may be far from beeing trivial)
    APPEND LINES OF I_T_FIELDS TO S_S_IF-T_FIELDS.
ELSE.                 "Initialization mode or data extraction ?
Data transfer: First Call      OPEN CURSOR + FETCH
               Following Calls FETCH only
First data package -> OPEN CURSOR
    IF S_COUNTER_DATAPAKID = 0.
Fill range tables BW will only pass down simple selection criteria
of the type SIGN = 'I' and OPTION = 'EQ' or OPTION = 'BT'.
      LOOP AT S_S_IF-T_SELECT INTO L_S_SELECT WHERE FIELDNM = 'MATNR'.
        MOVE-CORRESPONDING L_S_SELECT TO L_R_MATNR.
        APPEND L_R_MATNR.
      ENDLOOP.
      LOOP AT S_S_IF-T_SELECT INTO L_S_SELECT WHERE FIELDNM = 'MTART'.
        MOVE-CORRESPONDING L_S_SELECT TO L_R_MTART.
        APPEND L_R_MTART.
      ENDLOOP.
Determine number of database records to be read per FETCH statement
from input parameter I_MAXSIZE. If there is a one to one relation
between DataSource table lines and database entries, this is trivial.
In other cases, it may be impossible and some estimated value has to
be determined.
      SELECT werks INTO CORRESPONDING FIELDS OF TABLE it_t001w
               FROM t001w
               WHERE j_1bbranch NE '' AND
                     pkosa      = 'X'.
     DELETE it_t001w WHERE werks = 'HSPG'.
      SELECT matnr INTO CORRESPONDING FIELDS OF TABLE it_mara
               FROM mara
               WHERE matnr IN L_R_MATNR AND
                     mtart IN L_R_MTART AND
                     lvorm = ''     AND
                     mstae = ''.
        IF SY-SUBRC = 0.
    REFRESH: it_data.
     LOOP AT it_mara INTO wa_mara.
      LOOP AT it_t001w INTO wa_t001w.
        SELECT SINGLE * INTO wa_makl
                        FROM mkal
                        WHERE matnr = wa_mara-matnr AND
                              werks = wa_t001w-werks.
          IF sy-subrc = 0.
          REFRESH: it_stb2.
          CALL FUNCTION 'CS_BOM_EXPL_MAT_V2'
            EXPORTING
              capid                 = 'PP01'
              datuv                 = sy-datum
              mktls                 = 'X'
              mehrs                 = 'X'
              mmory                 = '1'
              mtnrv                 = wa_mara-matnr
              svwvo                 = 'X'
              werks                 = wa_t001w-werks
             werks                 = 'HSPG'
              vrsvo                 = 'X'
            TABLES
              stb                   = it_stb2
            EXCEPTIONS
              alt_not_found         = 1
              call_invalid          = 2
              material_not_found    = 3
              missing_authorization = 4
              no_bom_found          = 5
              no_plant_data         = 6
              no_suitable_bom_found = 7
              conversion_error      = 8
              OTHERS                = 9.
          IF sy-subrc <> 0.
           MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
          ELSE.
            IF it_stb2 IS NOT INITIAL.
             it_stb1 = it_stb2.
            IT_STB1 will have first level components
             DELETE it_stb1 WHERE stufe NE 1.
            IT_STB2 will have second and higher level components
             DELETE it_stb2 WHERE stufe EQ 1.
             CLEAR: lv_flag.
             LOOP AT it_stb1 INTO wa_stb1.
               l_index = sy-tabix.
               LOOP AT it_stb2 INTO wa_stb2 WHERE vwegx = wa_stb1-wegxx.
                 APPEND wa_stb2 TO it_stb3.
                 lv_flag = 'X'.
               ENDLOOP.
               IF lv_flag = 'X'.
                 DELETE it_stb1 INDEX l_index.
                 CLEAR: lv_flag.
               ENDIF.
             ENDLOOP.
            IT_STB2 will have only second level components
             it_stb2 = it_stb3.
             APPEND LINES OF it_stb1 TO it_stb2.
              APPEND LINES OF it_stb2 TO it_stb.
              REFRESH: it_stb1, it_stb2, it_stb3.
            ENDIF.
          ENDIF.
        ENDIF.
      ENDLOOP.
      LOOP AT it_stb INTO wa_stb.
        wa_data-matnr    = wa_mara-matnr.
        wa_data-mtart    = wa_stb-mtart.
        wa_data-werks    = wa_stb-werks.
        wa_data-partcode = wa_stb-idnrk.
        wa_data-quantity = wa_stb-MENGE.
        wa_data-vrkme    = wa_stb-MEINS.
        APPEND wa_data TO it_data.
      ENDLOOP.
      REFRESH: it_stb.
    ENDLOOP.
   ENDIF.
    V1 = 1.
    V2 = S_S_IF-MAXSIZE.
ENDIF.
Fetch records into interface table.
named E_T_'Name of extract structure'.
   FETCH NEXT CURSOR S_CURSOR
              APPENDING CORRESPONDING FIELDS
              OF TABLE E_T_DATA
              PACKAGE SIZE S_S_IF-MAXSIZE.
   IF SY-SUBRC <> 0.
     CLOSE CURSOR S_CURSOR.
     RAISE NO_MORE_DATA.
   ENDIF.
    CLEAR: wa_data.
    LOOP AT it_data INTO wa_data.
      IF SY-TABIX GE V1 AND SY-TABIX LE V2.
        APPEND wa_data TO E_T_DATA.
        CLEAR wa_data.
      ENDIF.
    ENDLOOP.
    S_COUNTER_DATAPAKID = S_COUNTER_DATAPAKID + 1.
    IF E_T_DATA[] IS INITIAL.
      RAISE NO_MORE_DATA.
    ENDIF.
    V1 = V2 + 1.
    V2 = V2 + S_S_IF-MAXSIZE.
ENDIF.
*}   INSERT
ENDFUNCTION.
Edited by: damawat on Aug 26, 2011 2:20 PM

How to put check box in a table format at the out put ? Urgent issue...

Hi,
I am working an assignment to assign multiple roles for multiplr user.
In selection screen we have to enter mutiple EMPNO from ..to
1) in second screen we will get the empno, First name, last name, Position,
    From date, To date, Sap user ID, Email id in the table formate with first
    column with Check box.
2) In second screen below the table I have to place the multiple roles just like in
   the step loop format and below this one Execute button should be there.
If we select the multiple employees or single employee and place the multiple roles or single roles and if I click the execute button then the multiple roles will be assigned to the multiple employees. The empno and roles will come from table and step loop to internal table and the same will pass to the BDC.
For this requirement I prepered recording for Transaction PFCG. But I can't understand how to design the second screen that table format and the step loop format. Can anybody give any idea or any coding to design the second screen.
and how to meet the requirement. This is urgent issue. Good SDN points will be reworded.
Witing for kind response.
Thanks in advance.
Bansidhar

Hi upendra
There are slight changes in the sivas code.Where is the data coming into the table.If its from a Model Node then iterate each element of the source node get that value compare and set the corresponding value in the element of the node binded to table.
Create a boolean attribute "select" in the table node and bind it to checked property of the check box.
for(int i=0;i<wdContext.node<tablenode>()..size();i++)
if(wdContext.node<tablenode>().get<tablenode>ElementAt(i).select())
wdContext.node<tablenode>().get<tablenode>ElementAt(i).set<yourattribute>(true);
else
wdContext.node<tablenode>().get<tablenode>ElementAt(i).set<yourattribute>(false);
See the attribute is boolean so pass true or false as a values in setter methods.
Regards
Kalyan

Urgent Issue !!! Related to CJ20N

Hi Guys,
This is an Urgent Issue!!!!
I have a requirement to upload the data .Initially they have created project definition and wbselement with the help of some data transfer technique later on they have added custom fields to this transaction.
Now for the existing project and wbs element they want to update the values for the new custom fields .
So can anybody suggest me how to approach this problem as this is my first requirement in PS.
Points will be rewarded....
Awaiting for your reply..
Regards,
Ravi Ganji

You can use lsmw and do a recording to insert those new customer fields. LSMW can call bdc recording and you can enter the values there...

Re: Related to CJ20N Urgent Issue

Hi Guys,
This is an Urgent Issue!!!!
I have a requirement to upload the data .Initially they have created project definition and wbselement with the help of some data transfer technique later on they have added custom fields to this transaction.
Now for the existing project and wbs element they want to update the values for the new custom fields .
So can anybody suggest me how to approach this problem as this is my first requirement in PS.
Points will be rewarded....
Awaiting for your reply..
Regards,
Ravi Ganji

Hello,
To update Customer fields in a WBS element you can use LSMW recording mode for Tx: CJ02
Enter the WBS element definition on the initial screen and cheese 'enter'
in the WBS element overview, choose first line and select from menu: ' Details -> <Customer Fields> (This is an exit and you may see a different text over here) and you see the customer fields. fill the values in the fields and save.
Hope this helps. Also please close all your previous threads.
Best Regards, Murugesh AS

URGENT ISSUE: Line In Lag

URGENT ISSUE: Line In Lag? Hello everyone, for Christmas I got a brand new computer with Windows 7 and a Soundblaster X-Fi card. I got this new computer to record music.
I was horrified to find out that when I record guitar, vocals, or anything else through the Line in there is a MASSIVE lag that makes it IMPOSSIBLE to record! I have been looking for a fix for this for two months now. Some people with Realtek sound cards are saying there is a way to eliminate the lag with the Realtek control center program, others claim ASIO4ALL can eliminate the lag but I've had no?luck with that. I've tried tons of things to only find that the lag still persists
I AM NOT THE ONLY ONE WITH THIS PROBLEM! THERE ARE HUNDREDS OF MUSICIANS EXPERIENCING THIS! I am very desperate, recording music is what I li've for, and with Windows 7 I can't do that. I am begging Creative or someone to help me. Release a patch, anything..... Musicians worldwide are in an uproar, just do a google search on this topic to see how many people are experiencing this!
PLEASE HELP!!
Sorry for the caps, thanks for your time

?Hi -XM-,
Please don't?assume all kinds of lag issue to be the one and same problem. It's like saying every flu-like?symptom?is caused by the same?strain of virus. Which X-Fi card do you have exactly, the X-Fi Xtreme series or the?Titanium series?Are you doing a single track or multi-track recording? How massi've is the lag?
If your Soundblaster X-Fi card came preinstalled or distributed?along with your new computer, please contact the respecti've computer vendor for assistance. Sound cards distributed in this manner are usually OEM models specially customized by the vendor, therefore any support?requests?should be directed to them.
However if?the sound card was purchased separately in a Creative?retail box, please contact our Customer Support using this email form.

Very Very Urgent Issue: Restricted Key Figure does not return any data

Hi all,
Please help me solving this urgent issue.
created customer exit variable on characterstics version and also
other customer exit variable on Value type.
I coded that in variable exit. Problem is when I include these in
restrickted keyfigure My query does not return me any data.
But if I remove from restrickted key firgure and put it as normal
charaterstics I see the variable is getting populated.
Also in RSRT the SQl generated when these are included in RKF is not
correct.
I debugged and know they are getting populated. As when included in RKF
I can also see the values of customer exit variables from information
tab.
I also know that there is data in cube for those restrictions.
I posted one OSS Notes regarding this urgent issue. But got no reply from SAP.
FYI: We are using BEx 3.5 Browser SAP GUI 6.4 Patch 20 BW Patch 11
Thanks
SAP BW
**Please do not post the same question twice: Very Urgent Issue: Restricted Key Figure does not return any data

Hi,
Everyone out there this is very urgent. If someone can help me solving this problem.
We are using BEx 3.5 Browser SAP GUI 6.4 Patch 20 BW Patch 11.
I posted one oss notes also regarding this issue. But got no reply from SAP.
So, Please help me solving this issue.
Thanks
SAP BW

Urgent issue with Intrastat

Hi All, we have very urgent issue with intrastat report ''VE01''.
There is many documents with error Log-''The statistical value of the document item is zero.''.
The pricing settings looks OK and its impossible to
correct those documents with error.
Any Idee how I could correct them for them to get the green status?
Points will be added if helpful
Thanks and regards
Luis

Hello Luis,
please check the VBRP-BRTWR. If this fiels is zero then you get an entry in the incompletion log.
the message could be also occur if the GRWR is zero.
Please check your pricing setting.
Hope this will help to solve the problem.
I f you are satisfied with the answer, please don't forget to give Reward Points.
regards
Claudia

Urgent issue in user-exit

hi friends,
one urgent issue regarding user-exits;
i have the requirement like this:
if any one of these fields ZPBSTQTY2, ZPCSTQTY2, ZPBKTQTY2, ZPCKTQTY2 and ZPBFRQTY2 in table S505 is GT 0, then i need to pass a value 'X' to two flags present in that table.
then i have to update it thru transaction VA01.
Plz suggest some solution for this.
Thanks
Praveen

SDAPO001 Activating Sourcing Subitem Quantity Propagation
SDTRM001 Reschedule schedule lines without a new ATP check
V45A0002 Predefine sold-to party in sales document
V45A0003 Collector for customer function modulpool MV45A
V45A0004 Copy packing proposal
V45E0001 Update the purchase order from the sales order
V45E0002 Data transfer in procurement elements (PRreq., assembly)
V45L0001 SD component supplier processing (customer enhancements)
V45P0001 SD customer function for cross-company code sales
V45S0001 Update sales document from configuration
V45S0003 MRP-relevance for incomplete configuration
V45S0004 Effectivity type in sales order
V45W0001 SD Service Management: Forward Contract Data to Item
V46H0001 SD Customer functions for resource-related billing
V60F0001 SD Billing plan (customer enhancement) diff. to billing plan
V45A0001 Determine alternative materials for product selection
And also you can write your code in MV45AFZZ
<b>Reward points</b>
Regards

Extracting purchasing info records

Hi all,
I am extracting purch info records and using SE16 and tables EINA and EINE to include plant, info record, material and vendor. I also need to include price of material. any ideas on what table to use for this?
Thanks in advance.

Hi,
Goto se16n, give table EINA, deselect all the fields, select only Inforecord, Material & vendor. Execute and export the file to excel sheet.
Then in se16n again give table EINE, deselect all the fields, select inforecod, plant & netvalue. Fill the inforecord field with the datas in excel sheet and execute.
You can get the equired report.
Reards,
Prabu

Extracting Multiple Logical Records through sql loader

Hello gurus,
I have few questions regarding the sql loader. I m totally new to this i have never used, this is the first time i m using
1.
How do i find the position number of the charcter or a number ? do i need to physically count the position ? is ther any specific way of counting or use textpad to do that ?
I know it sounds like silly question... but i wanted to know if there is any better way of doing it
2.
example data
1119 Smith      1120 Yvonne
1121 Albert     1130 Thomas
The following control file extracts the logical records:
INTO TABLE emp
     (empno POSITION(1:4) INTEGER EXTERNAL,
      ename POSITION(6:15) CHAR)
INTO TABLE emp
     (empno POSITION(17:20) INTEGER EXTERNAL,
      ename POSITION(21:30) CHAR)---
2. Can you please expalin me what does the "null if deptno = blanks " ?
deptno POSITION(1:2) INTEGER EXTERNAL(2)
              NULLIF deptno=BLANKS,I really appriciate it ~
Thanks

Hi,
The NULLIF means load blanks as NULL
http://download.oracle.com/docs/cd/B19306_01/server.102/b14215/ldr_field_list.htm#sthref1129
Not sure I understand your first question. You must of course know the format of the file, TextPad could be an ok tool for determining that format for a fixed column width file.
Regards
Peter

Urgent Issue:Err-REP-50125 : java.lang.ClassNotFoundException - 11.1.1.3.0

I'm trying to use custom destination with oracle fusion middleware 11.1.1.3.0 In-Process report server. I have added a custom destination section in the rwserver.conf file. Added the (customdest.jar - my jar file) jar file to the system classpath and reports_classpath. Still receiving class not found error.
Here are the details:
rwserver.conf:/opt/oracle/Middleware/user_projects/domains/ReportsDomain/config/fmwconfig/servers/WLS_REPORTS/applications/reports_11.1.1.2.0/configuration/rwserver.conf
<?xml version = '1.0' encoding = 'UTF-8'?>
<server xmlns="http://xmlns.oracle.com/reports/server" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" version="11.1.1.2.0" xsi:schemaLocation="http://xmlns.oracle.com/reports/server file:/opt/oracle/Middleware/as_1/reports/dtd/rwserverconf.xsd">
<cache class="oracle.reports.cache.RWCache">
<property name="cacheSize" value="50"/>


</cache>


*<engine class="oracle.reports.engine.EngineImpl" engLife="50" id="rwEng" maxEngine="1" minEngine="1" jvmOptions="-Xmx512M" classPath="/opt/oracle/Middleware/as_1/jlib/jsp-api-2.1-6.0.1.jar:/opt/oracle/Middleware/as_1/jlib/jsch-0.1.26.jar:/opt/oracle/Middleware/as_1/reports/jlib/customdest.jar">*
<property name="sourceDir" value="/opt/ogreports/catalog:/opt/ogreports/catalog/img"/>


</engine>
<engine class="oracle.reports.urlengine.URLEngineImpl" engLife="50" id="rwURLEng" maxEngine="1" minEngine="0" classPath="/opt/oracle/Middleware/as_1/jlib/jsp-api-2.1-6.0.1.jar:/opt/oracle/Middleware/as_1/jlib/jsch-0.1.26.jar:/opt/oracle/Middleware/as_1/reports/jlib/customdest.jar"/>
<security class="oracle.reports.server.RWJAZNSecurity" id="rwJaznSec"/>

<destination class="oracle.reports.plugin.destination.ftp.DesFTP" destype="ftp"/>
<destination class="oracle.reports.plugin.destination.webdav.DesWebDAV" destype="WebDav"/>
*<destination destype="rcpfile" class="com.ubizen.og.offline.reporting.oracle.RcpDestination">*
*<property name="user" value="tomcat"/>*
*<property name="destype" value="rcpfile"/>*
*</destination>*
<job engineId="rwEng" jobType="report"/>
<job engineId="rwURLEng" jobType="rwurl"/>
<notification class="oracle.reports.server.MailNotify" id="mailNotify">
<property name="succnotefile" value="succnote.txt"/>
<property name="failnotefile" value="failnote.txt"/>
</notification>
Error:/opt/oracle/Middleware/user_projects/domains/ReportsDomain/servers/WLS_REPORTS/logs/reports/rwserver_diagnostic.log
[2011-09-29T10:52:26.871-04:00] [WLS_REPORTS] [INCIDENT_ERROR] [REP-50125] [oracle.reports.server] [tid: 46] [userId: <anonymous>] [ecid: 0000JApf0iF9XbpSoQjc4m1EOGV800001d,1:18769] [APP: reports#11.1.1.2.0] [dcid: fa0c1bc817f5aeb4:-3e9d1a3b:1322b067681:-7fff-000000000000876f] REP-50125 : java.lang.ClassNotFoundException: com.ubizen.og.offline.reporting.oracle.RcpDestination [[
java.lang.ClassNotFoundException: com.ubizen.og.offline.reporting.oracle.RcpDestination
at java.net.URLClassLoader$1.run(URLClassLoader.java:202)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:301)
at java.lang.ClassLoader.loadClass(ClassLoader.java:247)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:169)
at oracle.reports.server.Destination.invokeShutdown(Destination.java:492)
at oracle.reports.server.Destination.shutdownDest(Destination.java:125)
at oracle.reports.server.RWServer.shutdown(RWServer.java:463)
at oracle.reports.server.RWServer.run(RWServer.java:364)
at java.lang.Thread.run(Thread.java:662)
ClassPath:.:/opt/oracle/Middleware/as_1/jlib:/opt/oracle/Middleware/as_1/reports/jlib
File in classpath: /opt/oracle/Middleware/as_1/reports/jlib
aolj.jar customdest.jar rwadmin.jar rwenv.jar rwxdo.jar
confmbean.jar runtimembean.jar rwbuilder.jar rwrun.jar
Relates to Oracle Bug:
https://support.oracle.com/CSP/ui/flash.html#tab=KBHome(page=KBHome&id=()),(page=KBNavigator&id=(viewingMode=1143&from=BOOKMARK&bmDocTitle=Can%20Not%20Find%20Class%20From%20Custom%20Destinations%20Jar%20File%20-%20REP-50125%20:%20java.lang.ClassNotFoundException&bmDocID=1263455.1&bmDocType=PROBLEM&bmDocDsrc=KB))
Note:
I'm not sure where the In-Process report server is looking for the classpath. I added them in all possible classpaths ans none of them worked.
This is an urgent issue in our team. We are migrating from 10g oracle application server to fusion middleware 11g report server. This functionality is working in 10g report server but not in 11g due to classpath issues.
Please let me know if additional info needed. Please respond.

Hi,
Thanks very much for responding. I added my jar file(customdest.jar) as you have suggested to setDomainEnv.sh. Now the In-Process report server just hangs when I try to bring it up through em and I don't see any errors in the log files. Any ideas where to look for errors? The jar files were created for 10g , we are just migrating them to 11g. I have setup the trace at highest level still don't see any error in rwserver_diagnostic.log.
Here is the details:
/opt/oracle/Middleware/user_projects/domains/ReportsDomain/bin/setDomainEnv.sh :
if [ "${SERVER_NAME}" = "WLS_REPORTS" ] ; then
POST_CLASSPATH="/opt/oracle/Middleware/wlserver_10.3/server/lib/weblogic.jar:/opt/oracle/Middleware/as_1/opmn/lib/nonj2eembeans.jar:/opt/oracle/Middleware/as_1/jdbc/lib/ojdbc6.jar:/opt/oracle/Middleware/as_1/opmn/lib/optic.jar:/opt/oracle/Middleware/as_1/opmn/lib/iasprovision.jar:/opt/oracle/Middleware/oracle_common/modules/oracle.adf.share_11.1.1/commons-el.jar:/opt/oracle/Middleware/as_1/jlib/dfc.jar:/opt/oracle/Middleware/as_1/dvt/lib/dvt-jclient.jar:/opt/oracle/Middleware/as_1/dvt/lib/dvt-utils.jar:/opt/oracle/Middleware/oracle_common/jlib/ewt3.jar:/opt/oracle/Middleware/oracle_common/modules/oracle.iau_11.1.1/fmw_audit.jar:/opt/oracle/Middleware/as_1/oui/jlib/http_client.jar:/opt/oracle/Middleware/oracle_common/modules/oracle.idm_11.1.1/identitystore.jar:/opt/oracle/Middleware/oracle_common/modules/oracle.idm_11.1.1/identityutils.jar:/opt/oracle/Middleware/oracle_common/modules/oracle.jps_11.1.1/jaccprovider.jar:/opt/oracle/Middleware/oracle_common/modules/oracle.jps_11.1.1/jacc-spi.jar:/opt/oracle/Middleware/as_1/ord/jlib/jai_codec.jar:/opt/oracle/Middleware/as_1/ord/jlib/jai_core.jar:/opt/oracle/Middleware/oracle_common/modules/oracle.oc4j-obsolete_11.1.1/jazn.jar:/opt/oracle/Middleware/oracle_common/modules/oracle.oc4j-obsolete_11.1.1/jazncore.jar:/opt/oracle/Middleware/oracle_common/jlib/jewt4.jar:/opt/oracle/Middleware/as_1/jlib/jta.jar:/opt/oracle/Middleware/oracle_common/modules/oracle.ldap_11.1.1/ldapjclnt11.jar:/opt/oracle/Middleware/as_1/lib/mail.jar:/opt/oracle/Middleware/as_1/jlib/netcfg.jar:/opt/oracle/Middleware/as_1/jlib/oracle_ice.jar:/opt/oracle/Middleware/oracle_common/jlib/share.jar:/opt/oracle/Middleware/as_1/jlib/zrclient.jar:/opt/oracle/Middleware/as_1/reports/jlib/aolj.jar:/opt/oracle/Middleware/as_1/reports/jlib/confmbean.jar:/opt/oracle/Middleware/as_1/reports/jlib/runtimembean.jar:/opt/oracle/Middleware/as_1/reports/jlib/rwadmin.jar:/opt/oracle/Middleware/as_1/reports/jlib/rwbuilder.jar:/opt/oracle/Middleware/as_1/reports/jlib/rwenv.jar:/opt/oracle/Middleware/as_1/reports/jlib/rwrun.jar:/opt/oracle/Middleware/as_1/reports/jlib/rwxdo.jar:/opt/oracle/Middleware/as_1/jlib/rts2.jar:*/opt/oracle/Middleware/as_1/reports/jlib/customdest.jar*:${CLASSPATHSEP}${POST_CLASSPATH}"
export POST_CLASSPATH
Log file: rwserver_diagnostic.log
/opt/oracle/Middleware/user_projects/domains/ReportsDomain/servers/WLS_REPORTS/logs/reports
<destination class="oracle.reports.plugin.destination.ftp.DesFTP" destype="ftp"/>
<destination class="oracle.reports.plugin.destination.webdav.DesWebDAV" destype="WebDav"/>
<destination destype="rcpfile" class="com.ubizen.og.offline.reporting.oracle.RcpDestination">
<property name="user" value="tomcat"/>
<property name="destype" value="rcpfile"/>
</destination>
<job engineId="rwEng" jobType="report"/>
<job engineId="rwURLEng" jobType="rwurl"/>
<notification class="oracle.reports.server.MailNotify" id="mailNotify">
<property name="succnotefile" value="succnote.txt"/>
<property name="failnotefile" value="failnote.txt"/>
</notification>


<connection idleTimeOut="15" maxConnect="50"/>
<queue maxQueueSize="1000"/>

<pluginParam name="mailServer" value="%MAILSERVER_NAME%">




</pluginParam>
</server>
[2011-10-02T23:31:51.431-04:00] [WLS_REPORTS] [TRACE:32] [REP-56025] [oracle.reports.server] [tid: 22] [userId: weblogic] [ecid: 0000JB7par79XbpSoQjc4m1EYIaI00000F,0] [SRC_CLASS: oracle.reports.utility.RWLogger] [APP: reports#11.1.1.2.0] [dcid: fa0c1bc817f5aeb4:7b3253ab:132c7c7f2e9:-8000-00000000000000fa] [SRC_METHOD: writeln] RWServer:startServer Reports Server is starting up.
[2011-10-02T23:31:51.435-04:00] [WLS_REPORTS] [TRACE:16] [] [oracle.reports.server] [tid: 22] [userId: weblogic] [ecid: 0000JB7par79XbpSoQjc4m1EYIaI00000F,0] [SRC_CLASS: oracle.reports.utility.RWLogger] [APP: reports#11.1.1.2.0] [dcid: fa0c1bc817f5aeb4:7b3253ab:132c7c7f2e9:-8000-00000000000000fa] [SRC_METHOD: writeln] Multicast:registerReceiver Packet handler registered
[2011-10-02T23:31:51.435-04:00] [WLS_REPORTS] [NOTIFICATION:16] [] [oracle.reports.server] [tid: 22] [userId: weblogic] [ecid: 0000JB7par79XbpSoQjc4m1EYIaI00000F,0] [APP: reports#11.1.1.2.0] [dcid: fa0c1bc817f5aeb4:7b3253ab:132c7c7f2e9:-8000-00000000000000fa] ServerPacketHandler:start ServerPacketHandler started successfully
[2011-10-02T23:31:51.441-04:00] [WLS_REPORTS] [NOTIFICATION:16] [] [oracle.reports.server] [tid: 22] [userId: weblogic] [ecid: 0000JB7par79XbpSoQjc4m1EYIaI00000F,0] [APP: reports#11.1.1.2.0] [dcid: fa0c1bc817f5aeb4:7b3253ab:132c7c7f2e9:-8000-00000000000000fa] SecurityHelper:start Security system rwJaznSec successfully started.
No more error logged after this line. but in-process server just hung up indefinitely when I tried stating via the em and also via getserverinfo URL.
In rwserver.conf: I have defined the following for custom destination
/opt/oracle/Middleware/user_projects/domains/Repdomain/config/fmwconfig/servers/WLS_REPORTS/applications/reports_11.1.1.2.0/configuration/rwserver.conf
<destination destype="rcpfile" class="com.ubizen.og.offline.reporting.oracle.RcpDestination">
<property name="user" value="tomcat"/>
<property name="destype" value="rcpfile"/>
</destination>

Urgent issue: photo invalid format after conversion

Hi,
I have this urgent issue...I purchased and Ipod in USA and with camera connector I downloaded all the pictures taken (1700...). Came back to home, I connected the Ipod to my Ibook and I saw a message "optimizing ipod for mac" ... after this, only 67 photo are working. The other are all "invalid format" .... I also looked at the binaries of the image...it seems the ones invalid missed the jpeg header or information. Does anyone know what happens in this "optimization" and if there is something to come back? THank you so much!

Hello All,
Could anyone assist me with a fix for the problem ?
Would appreciate it greatly.
Thanks.

Urgent issue 0HR_PE_01 extracter giving no records

Similar Messages

Maybe you are looking for