Urgent Issue - Copy DTP and Process Chains in New Client Instance

We have created new client Instance ( CLNT 510 ) based on our present client ( CLNT 500 ).
We have all the process changes, application components from source system CLNT 500 and data ( both for master and transaction data ) in place for the CLNT 500.
Now we need to use the CLNT 510 for our futher development. RFC connection has been established.
Just want to know, do we need to create all the Application component trasfer , Transformation, DTP , Infopackages , Process chains again for the CLNT 510 data.
please help.
Thanks and Kind Regards,
Pratap Gade.

Hello Jr Roberto,
Hello Jr Roberto,
We have company implementing mutiple SAP Implementations in different countries.
Client for BW Dev is 400.
Source system for Client BWD :
ECC Client ERP Dev - 500 ( for Holland Implementation )
ECC Client EPR Dev - 510 ( for German Implementation - Instance of ECC 500)
We are completed with the Client 500 implementation.
We are starting the german implementation and they have created a intance of Holland ECC Dev client 500 for german implementation with german data.
Now they have setup 2 rfc connection in BWD 400.
Also finally when they move to QAS client they are going to integrate the data of the both countries into one client.
Presenlty I need to use ECC client 510 client for our german development.
We have around 40 SAP BI reports in our first implementation. and around 10 in our second implementation.
Just want to know, what are issues to be considered in loading master data ( will it overwrite the master data from the client 500, if i extract the master data from client 510 )...and all the other issues like can I copy all the process chains...etc from client ECC 500 to ECC 510, without creating all transformation, DTP , Infopackages to load all the master from client 510 again.
I need a broad understand on how to go about the development ...starting with Application Components transfer from source system Client 510 ....to report development. ( if possible using the already created objects....infopackages , DTP etc..)
your help would be really appricated Mr Roberto.
Thanks and Kind Regards,
Shekar.

Similar Messages

How to copy a existing process chain

hi
i am a SAP BW learner.
i created a process chain for inital load and i want to create a process chain by copying first created process chain and tell me in what situation we delete the indexes of InfoCube.
Can any one provide me the solution to how can i copy the existing process chain and tell me in what situation we delete the indexes of InfoCube.
Thanks in Advance.

Hi Kiran:
Thats correct, you can copy an existing process chain and you will get all the variants in it.
well, the best practice to manually do the INIT loads and let the delta loads be in process chain.
we delete indexes and re create them when we are loading an infocube and the reason is performance
Assign points if helpful
kalyan

Triggering Process chain based on execution of R3 job and Process Chain

Hi All,
I need your help in arriving at a solution for a reqirement.
Scenario is., I need to trigger a process chain B based on successful execution of Process chain A and an R3 job. If both conditions(Completion of R3 job and Process Chain A) are met then only it has to trigger process Chain B.
I know that we can use events to trigger a process chain using R3 job.But my case is differenet I need to consider the success message from both process chain and R3 job.Is there any way to solve it ?
Please provide me with your valuable inputs.
Thanks,
Bindu

Hi Hima,
You can use the 'AND' variant for both, If both are success then trigger the process chain.
Regards,
Ravi Kanth
Edited by: Ravi kanth on Apr 30, 2009 3:36 PM

Back ground processes, dialogue processes and Process chains

Hai all,
I am going through making process chains and I am struck with one thing:
"How many background process chains and dialogue processes you have during run time"
This is the problem. I understood everything else except this.The concept says that I have to know what is the capacity of the system, how many background and dialogue processes it could accomodate, how many are left and how many you can use for your process chain.How do we find out this? and could somebody please explain me or refer to documentation about the Back ground processes, dialogue processes and Process chains.
Thanks.

Hi Visu,
You can see the number of dialog and background processes by using transaction SM51 and then double clicking on the server (we only have one but it may be different for each). Our BASIS folks take care of the number of processes as well. And, for us we have a schedule that changes the number at a certain time of day because you tend to need more dialog during the day but more batch at night.
The transaction to look at and change the settings is RZ03. Then use the menu path Edit->Operation Modes you can select either Configuration or Timetable here. Both give information in different ways. I tend to double click around to see what it might tell me.
I hope this helps a bit,
Diane

What are the practical differences betweens infopackages and process chains

Hi,
what are the practical differences betweens infopackages and process chains.
Thanks,
cheta.

Hello BW,
Hope the following links will give u a clear idea about process chains
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/events/sap-teched-03/using%20process%20chains%20in%20sap%20business%20information%20warehouse
Business Intelligence Old Forum (Read Only Archive)
http://help.sap.com/saphelp_nw2004s/helpdata/en/8f/c08b3baaa59649e10000000a11402f/frameset.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/8da0cd90-0201-0010-2d9a-abab69f10045
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/19683495-0501-0010-4381-b31db6ece1e9
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/36693695-0501-0010-698a-a015c6aac9e1
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9936e790-0201-0010-f185-89d0377639db
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3507aa90-0201-0010-6891-d7df8c4722f7
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/263de690-0201-0010-bc9f-b65b3e7ba11c
/people/siegfried.szameitat/blog/2006/02/26/restarting-processchains
regards,
Muralidhar Prasad.C

Authorizations and Process Chains

Hi All,
Can any one help me in learning Authorizations and Process Chains. Could you please send me some real time documents on the following.
1. How would we get the requirements from the client to create Authorizations? What info will they give us basically to create them?
2. The same with Process Chains.
Could someone plese send me the requirements documents(on authorizations and process chains) they get from the client to know it from a real time perspective.
My email ID: <b>[email protected]</b>
Many thanx in Advance...
Best Regards,
Nimma.

Hi A.M.S,
Thanx for ur reply.
However, I am looking for some real time specifications which we get from client just to know how the requirements will come to us and then the steps to be followed and so on...
I would be grateful if you could send me some of them.
Best Regards,
Nimma.

Differences Between Infopackage Groups and Process chains

Hi All,
Can anybody explain me what are the differences between Infopackage Groups and Process Chains ? And how process chains are more comfortable

hi nagarjuna,
An InfoPackage group is a collection of InfoPackages. In order to summarize data requests which logically belong together from a business point of view, and to therefore simplify the request, you can collect data requests (meaning the InfoPackages) into an InfoPackage Group. You can schedule each of these groups in the scheduler . With the data request the scheduler can access InfoPackage groups directly and thereby request more than one InfoPackage at a time, corresponding to the setting in the InfoPackage group. Thus, you can support InfoPackage groups with the serialization of your data requests.
While a process chain is a sequence of processes that wait in the background for an event. Some of these processes trigger a separate event that can start other processes in turn. hit this link to know abt PCs:
http://help.sap.com/saphelp_nw04/helpdata/en/8f/c08b3baaa59649e10000000a11402f/content.htm
Process chains are more comfortable becoz itz not like infopackages where we have to schedule each pack individually. And in PCs, monitoring is very convenient since u see evrything in a single page.
regards
sham'm

Delta loading and Process chain BI

Hi experts,
Two Issues.
1)As i am loading FI data into dso through a process chain which includes Start process>Delta infopackage(which gets data upto psa)>Delta dtp-->Datastore activation.
But infopackage is picking up deltas but DTP is picking up all the previous records plus deltas.
100 records -- 1st day throught Intialization of Delta with Data Transfer
2 delta records -- 2nd day
But DTP is picking up 102 Records on the 2nd Day, which means it is also picking the old records as well.
The DSO must have just 102 records but it is having 202 records.
2) A process chain in running daily as scheduled , but I rescheduled with new scheduling options without deactivating the Process chain.
My Question is
Will the Process chain run for the OLD and the New Schedule or
Is it going to run for new schedule or old one?
or
will I face any Problem because I did not deactivate and made changes to the Change.
Please help me in this matter.
Thanks in advance.
Bhadri.

First query:
I believe that u have used FUll update type DTP is instead of the Delta DTP.. Please cross check the Update mode of the DTP once.
To resolve this issue, delete the total content of the DSO as u have Init and delta loads in PSA. And then using the Delta DTP of the Process chain, load the data. It will extract the total cotent what ever is there in PSA, and later the same DTP will act as the Delta type and will pick the data from the New request of the PSA.
Second Query:
Its always suggested to deschedule the process chain before changing the schedule timings. When ever u do this type of scheduling, just check how many number of JObs available in Schedule mode, if u can see more than one, then delete the older one and keep the new one as it is.
But I always suggest you to deschedule the process chain and reschedule PC with the new timings and then activate the same.
Thanks
Assign points if this helps

First DTP in Process chain giving Error "CX_RSB_WRITE_ERROR"

Hi All,
I am facing a problem when I execute a process chain.
I have a master process chain and 3 sub process chains. Each of these sub process chains are having some DTP in it in a sequential order. These DTP's are Independent of each other, so even if the first one gives you errors, the remaining ones will get executed.
These DTP's are used to put some files in to the Open Hub Destination, which is the application server, using logical files names.
now the problem is that, when i execute the master Process Chain, the first DTP in each of the sub Process chains are getting failed by giving an error. the error is as follows.
Error : Uncaught_exception.
Exception : CX_RSB_WRITE_ERROR
Any idea in how to correct this? Any help in this regard will be highly appreciated.
Thanks
Ajith

You might have missed some parameters in the FILE transaction.
Check the below links so that u may get idea wht u missed out.
Re: Can any one tell me how to write open hubs to application server?
http://help.sap.com/saphelp_nw2004s/helpdata/en/8d/3e4ec2462a11d189000000e8323d3a/content.htm
This might not be an security or authorization issue if u did not face such issue earlier. if so check with BASIS and add security roles to the generic user.

Issue realted to the process chain.

dear sir,
i hope all are doing great, this is the message regarding the issue with process chain in sap-bw(from application server)
i'm trying to load data from flat file to ods and infocube parallely, i've created the infocube and ods object and i've also created the respective infopackages and copied the name of infopackages.
i've created the process chain and in monitoring i.e. rspcm when i'm adding the process chain the status in not green its a yellow triangle.
apart from that i'm getting an error message saying that- objects have been locked by the sapuser.
please do help me to get rid of this issue.
please do send me the related documents regarding the process chains, that would help me to understand the concept.
thank you.
regards,
ratin.

You will need to post this to a 'better' forum this is crystal reports.

Data Manager Packeage and Process chain si not working

Hi All,
I executed a data manager package which contain a process chain to revaluate the one of my Account dimension meneber Say "Revenue". I am working on BPC NW 7.0
steps I followed:
1. I created a script logic file and created a custom process chain.
process chain steps:
a) Start variant
b) Modify dynamically
c) Run Logic
d) Or and Clear BPC tables
2. This process chain was included in data manager package.
3. Data manager package was modyfied to include parameters and scipt logic file name.
4. executed data package
The issue is " when I execute Data manager Package" I dont get any error but when I View status I dont see any pachage running or completed. If I see Process chain, It is failing at first step of Modify dynamically..no clue?
Could you please let me know what could be a issue?
Cheers,
SAC

I encounter this problem, Do this Steps:
I. First,check if your process chain is existing in the Library.
II.If yes,follow the steps below:
1. Edata - organize Package - Modify your Package.
2.Check if you had the correct process chain.
3.IF yes, Click View package at its right side.
4.Expand the Task Folder and take note of the Task Name (e.g. ZBPC_PROT_RUN_LOGIC)
5.click Advance,Compare the task name that you noted in the syntax TASKS
(e.g. TASK(ZBPC_PROT_CF_RUN_LOGIC,SUSER,%USER%)
6. It should be the same.
Running package but not appearing any status happens when the system cannot find your process chain.
hope this helps,

Infopackage and process chain status

Hello expert,
I am new in BW technology and I need some help...
Well I have created a process chain in order to load data into infoprovider. This process chain is running everyday in production system, (it's a tipical PC: delete PSA request, run infopackage, run DTP....)
I have checked the last status of the process chain and it's yellow since two days ago... It was due a communication error between ERP and BW system, therefore (for some reason), the infopackages started but never ended (always yellow status).
So, my questions are:
1.- Is there any configuration for the infopackage to prevent yellow status (for more than X time)?
2.- Could we control it in a process chain?
Thank you and best regards

Hi,
We can configure for infopackage incase of no records found however you can setup for time linmit.
You can set the status the request is to receive per InfoPackage in the Scheduler, via Scheduler Warning Handling. This setting overrides the system-wide setting.
Check the below link for more info :
http://help.sap.com/saphelp_nw04/helpdata/en/80/1a65cfe07211d2acb80000e829fbfe/frameset.htm
Regards,
Satya

Duplicate DTP in Process chain

Hi folks,
I have 2 separate loads (infopackages) scheduled that load into infoobject via a DTP. I can't run these both before running the DTP as this may result in duplicate entries. Ideally, I would run the infopackage 1 followed by DTP and then infopackage 2 followed by the same DTP. Within the process chain workbench, it does not allow for this which is understandable. Is there a way to do this in a process chain? or 2 separate process chains is the only way to achieve this?
Thanks.

Hi Intel
It sorts the entries and delete adjacent duplicate.
10000     A
10000    A
20000    B
30000    C
50000    D
50000    D
Now it will delete duplicate records like 10000,50000. For InfoObject it does not create any problem as in InfoObject level it is always OVERWRITE.
and it does all the processing before sending records to InfoObject attribute table
You can also enable Error Handling in DTP (valid records update, request green) without selecting "Duplicate records handle".
This will send all the duplicate to Error stack and you can compare and understand how it works
Regards
Anindya
Edited by: Anindya Bose on Feb 9, 2012 1:22 AM

Urgent:changing the Directory of process chains

HI SAP GURUS,
I actually created some process chains in the notassigned nodes ,i want to assign them another directory in which all my other process chains.Can any body help me to sort this.Its very urgent
thanks in advance
Message was edited by:
narendra kumar ragulakollu

hi Narendra,
try RSPC->choose your process chain, go to menu process chain-attributes-display component (shift+F11)-> a small screen 'assign display grouping will come out', choose the 'directory' you want. save the process chain and 'refresh'.
hope this helps.

Scheduling DTPs without Process Chains

Hello all,
Just the same way as scheduling an InfoPackage for later execution, can DTPs also be scheduled manually for later and recurring execution without using Process Chains. I wagely remember that I figured out a way sometime back, but cannot remember it now. It could be thru a function module OR ABAP program OR something else. Any help will be appreciated.
Regards
Sankar

You can't schedule DTP manually except process chain.
Check this:
/message/4111471#4111471 [original link is broken]
Hope it helps..

Urgent Issue - Copy DTP and Process Chains in New Client Instance

Similar Messages

Maybe you are looking for