Urgent.. issue in MM loading: 2lis_02_scl and 2lis_02_itm

Hi Gurus,
I am getting a short dump when i am trying to load the data from datasources: 2lis_02_scl and 2lis_02_itm.
It is giving the error message : "
   "MESSAGE_TYPE_X" C
   "SAPLRSC2" or "LRSC2U01"
   "RSC2_QOUT_READ_DATA"
and even the repeat of delta has failed again.
Can ne body please help as this is business critical issue.
Thanks in advance,
Anurag Rathore

Hi
There is one other method where in youc an go to the Item and Schedule line tables ( EKET) and filter on created on and load those documents into BW.
However this is tedious process as you many have several documents to fill the setup tables
This is just another alternative..
Regards,
Srini

Similar Messages

Delta Loads for 2lis_02_scl and 2lis_02_itm

Hi Experts,
I am facing an issue, After initializing the setup tables and doing the init load for 2lis_02_scl and 2lis_02_itm whenever I do the delta loading for these two, all the dataload finish with green status and extracting 0 from 0 records.
I can see the queues for both these datasources in RSA7 in R/3, yet no record is extracted.
Any help will be appreciated.
Regards.

Hi,
have a look into transaction smq1. there you should be able to see your extraction queues with the entry MCEX02 (or likewise)
Please schedule the program RMBWV302 and when this one is finished, start the deltapackage.
hth
cheers
sven

2LIS_02_SCL and 2LIS_02_ITM missing records

Hi,
We have a problem with DS: 2LIS_02_SCL and 2LIS_02_ITM. We load data in 0PUR_C01 throu Bi content standard objects (0PUR_C01 2LIS_02_ITM / ...SCL). ... there seem to be problem with DS because In infocube 0PUR_C01 we don't get consigment records (consigment records - possition on PO). I have already checked DSs in RSA3 and those records are missing?
Any ideas?
JN.

Hi,
are you sure you have PO's for your consignments? I would recommend to check the source tables EKKO, EKPO and EKET first. Once you are sure to have PO's there for consignments you can run RSA3 for the DS with the EBELN (PO Number) and confirm that the extractor does not extract them. One thing to watch out for the RSA3 does not pull from the delta queue but from the setup tables. So you need to make sure that the Consignment Document you are missing are the setup tables.
Hope that helps,
Michael
PS the extractor also pulls BSTYP Document Category K (Contracts) and L (Scheduling agreements)
Edited by: Michael S on Jul 14, 2009 12:20 PM

2lis_02_scl and 2lis_02_itm

Hi developers,
I've activated the extractors 2lis_02_scl and 2lis_02_itm, when I do the initalitation in the setup tables I don't see any record also if in the execution log there are 7230 documents.
Any ideas to solve my problem?
Best Regards!

Hi Roberto,
Thanks for your answer!
You have understood my problem! After the setup OLI3BW for MM-PUR in the table MC02M_0SCLSETUP and MC02M_0ITMSETUP there are not entry and in LBWE I've activated the extractors.
The Extractor LIS for area MM Stock and SD work perfectly.
The problem is only for 02MM! I've opened an OSS note but none answer!
Can you help me, plese?
Thanks a lot!

Difference 2LIS_02_SCL and 2LIS_02_ITM

Hello,
I've stumbled on a simple question when analyzing Purchasing Data Business Content. We would like to activate this BC because it would suit our needs, but found out that 2LIS_02_SCL and 2LIS_02_ITM provide the same InfoObjects to 0PUR_C01.
What's the difference between these two DataSources? Who can provide us with information so we can make a choice between these DataSources?
Kind regards,
Bastiaan Lascaris
points assured *

Hi,
th einfo object may be the same but there is a big diffrence . LIS_ITM is meant for item level information e.g for one item 001 u have quantity 90PC.
Your LIS_SCl will contain the schedule line information that is if somebody wants schedule date wise e.g we have in Item 001 quanity 90PC,
in Schedule line it will be schedule line wise that is,
Item         Schedule line   Schedule line date          quantity
001             1                   01.01.2005                    45
001             2                   01.02.2006                    45
Hope u got the things..
Regards..

Issues with Edge loading slowly and Not filling its space until loaded

I am in the last stages of wrapping up a new website and have a nice Edge Animation slated for the top of the home page. The content, which includes a poster is published. However, when the page loads there is a lag before the animation fills its designated spot.
I tried using a preloader but then the entire content of the animation appeared behind the other content - making matters much worse.
In order to reserve a spot I tried creating another div with a background image as a placeholder, but because this content is responsive horizontally and vertically the placeholder locks the content into a predefined space and is not properly responsive.
I optimized the content to cut down on load time (not sure why Edge doesn't do the optimizing), but it is still not enough to resolve this issue. I would really appreciate some insights.
Thanks.

I think it is fairly safe to say that I have been completely ignored on this one.

URGENT: Issue with hierarchy level keys and report drill down

Hi,
BASIC STRUCTURE:
I have created a subject area with 3 facts (FACT_A, FACT_B, FACT_C) and 4 dimesnions (TIME_DIM,DIM_2,DIM_3,DIM_4). Each fact table also has additional aggregate tables aggregated along levels of the time dimension. Also our timw dimension has aggregated dimension tables like TIME_DIM_WEEK, TIME_DIM_MONTH, TIME_DIM_QUARTER and TIME_DIm_YEAR.
GOAL:
All 3 facts have the same measures M_1 and M_2 in them but may not have data for the same dimension values selected.
For example
For month JAN 2000 FACT_A.M1=100$ and no data exists for JAN 2000 in FACT_B and FACT_C. Then in the report
for JAN2000 it should show FACT_A.M1= $100, FACT_B.M1 = 0 and FACT_C.M1 =0. In this case I should be able to drill down to the lowest level.
ISSUE:
The time dimension TIME_DIM has the following levels - Total -> Year -> Quarter -> Month -> Week -> Day
However I am having an issue with drill down in the reports whenever I pull metrics from more than 1 fact at a time. I have defined the level keys but not sure if I need to do anything in addition since I am using aggregates.
I have to fix this issue quickly. Please help me.

Alastair,
All the fact tables have aggregated facts as sources.
I have checked the levels set for each of the sources to the time dimesnion table in BMM and they look okay. So the Time dim table in BMM has 4 source tables
Time_Day (level set to day, table key is "day"),
Time_month (level set to month, table key is "Fiscal_Month_Code"),
Time_Quarter(level set to quarter, table key is "Fiscal_Quarter_Code") and
Time_Year(level set to year, table key is :Fiscal_Year_Code").
Note: No time week aggregate added as logical source.
Again the time dim hierarchy based off of this table has levels: Total -> Year ->quarter -> Month -> week -> day
The levels keys set for each level are
Year -> Primary key is Year_Name (YYYY)(Checked as chronological key) and another key is Year_Num (YYYY)(Checked as chronological key)
Quarter->Primary Key is Quarter_Name (YYYY Qn), another key is Quarter_Number (Format n where n can assum values 1,2,3,4). Both keys are set as chronological keys
Month -> Primary key is Month_Name (MON YYYY), another key is Month_Num (Format n where n can assume values from 1 to 12) Both keys are set as chronological keys
Week -> Primary Key is week name (YYYY Wk nn, where nn can have values from 1 to 53), another key is week num (nn, where nn can have values from 1 to 53)
Day -> primary key set to day (date format)
Issue1: When I try to drill to lower levels it throws out an error saying report cannot find any data because filters may be too restrictive even though I see data at higher level
For ex: If I drill down to Year: 2010 and Qtr: 2010 Q2 and M1:$100 when I click on Qtr to drll to month level it throws me the error
Issue2: when I add year and qtr colums to the report I see data as below which is incorrect
Year_Name Qtr_Name data:FACTA_M1 Data: FactB_M1
2009 2009 Q1 $10 $5
2009 2009 Q2 $20 $80
2009 2009 Q3 $20
2009 2009 Q4 $30
2010 2010 Q1 $100
2010 Q2 $101
2010 Q3 $102 $230
2010 Q4 $103
2011 Q1 $10
In the above example year_name is not showing up for 2010 Q2 and after. However if I change the primary key for level 'Quarter' by having key consist of year name and quarter name instead of just quarter name the issue doesnt occur and drill down works great. The only issue is when I drill from qtr it first shows year name and quarter name instead of showing the next level which would be month name.
Sorry about the long message but I thought you might notice something in how I have set up the keys.
Thanks

Purcahsign data tables for the extractors 2lis_02_scl and 2lis_02_itm

Hi,
Can any one tell in which tables the purchasing data is stored in R/3
Thanks in Advance
Dru

Hi........
EKKO >> Purchase document
EKPO >> Purchase document (item level)
EKPV >> Shipping-Specific Data on Stock Tfr. for Purch. Doc. Item
EINA >>Purchase info record (main data)
EINE >> Purchase info record (organizational data)
EBAN >> Purchase requisition
EBKN >> Purchase Requisition Account Assignment
T024 >> Purchasing Groups
EKET >> Scheduled lines
EKES >> Vendor confirmed lines
Regards,
Debjani......

2lis_02_scl or 2lis_02_itm - goods receipt/invoice receipt number

Hi Gurus,
there is a field:
BUDAT - Posting date of goods receipt/invoice receipt for purchase order; Table: EKKO/EKBE
in 2lis_02_scl and 2lis_02_itm Data Sources.
As I can see, for every Purchase Order Item I get three records:
- one record for the last Invoice Receipt (with Posting date of invoice receipt in BUDAT field)
- one record for the last Goods Receipt (with Posting date of goods receipt in BUDAT field)
- one record for something else.
Do I understand it well? What is the third record?
I would to get Material Document Number, that is, Invoice Receipt Number for the first record and Goods Receipt number for the second one. How can I make it?
Regards,
Dorota

you should be able to use Movement Type field to differentiate between Invoice or Good Reciept.
Regards,
Gaurav

Urgent issue: photo invalid format after conversion

Hi,
I have this urgent issue...I purchased and Ipod in USA and with camera connector I downloaded all the pictures taken (1700...). Came back to home, I connected the Ipod to my Ibook and I saw a message "optimizing ipod for mac" ... after this, only 67 photo are working. The other are all "invalid format" .... I also looked at the binaries of the image...it seems the ones invalid missed the jpeg header or information. Does anyone know what happens in this "optimization" and if there is something to come back? THank you so much!

Hello All,
Could anyone assist me with a fix for the problem ?
Would appreciate it greatly.
Thanks.

Year 2010-2011 MacBook Pro version 10.7.4 issues: freezes up, files are loading slowly and buttons are not responding

Hello my fellow Apple product user's. My problem has been going on for about a month and half with my laptop locking up, file folders on my desktop loading slowly and my sleep button and other buttons on my dash board not responding. Where to being with my issues that are listed up in my title and my first scene. The first issue has been my file folders are not loading fast like that did before, the issue is that they load in about 10-15 if not a little longer after I log into my laptop desktop. The second issue is that my sleep button does not respond to sleep right away, I have to press it three or four different times after I have logged out of my desktop to make it go to sleep. The final problem is dealing with my buttons and laptop locking up, when I started an application called runescape after it load to the log in screen and after I came back to log into the game it decide to lock up/ froze on me and durning that time my buttons on my dashboard was not responding, so I decide to command q to quit the application and after that buttons were not reponding to it and I decide to do common and control c to see if it would work and it did and after that everything has been working fine except for the files are loading slowly. Also I had another issue with the laptop sleeping so quick as soon I am using the Internet. There was one other problem that had happen to me just like my description in my first scene, but I do not remember that issue.
Please no spamming, flaming and being plain rude to me and others. If you can not listen, read, or under stand my warning you will be kicked off from posting on threads buy a froum monitor. Pleas and thank you for posting and helping me out with fixing my problems.

Hello my fellow Apple product user's. My problem has been going on for about a month and half with my laptop locking up, file folders on my desktop loading slowly and my sleep button and other buttons on my dash board not responding. Where to being with my issues that are listed up in my title and my first scene. The first issue has been my file folders are not loading fast like that did before, the issue is that they load in about 10-15 if not a little longer after I log into my laptop desktop. The second issue is that my sleep button does not respond to sleep right away, I have to press it three or four different times after I have logged out of my desktop to make it go to sleep. The final problem is dealing with my buttons and laptop locking up, when I started an application called runescape after it load to the log in screen and after I came back to log into the game it decide to lock up/ froze on me and durning that time my buttons on my dashboard was not responding, so I decide to command q to quit the application and after that buttons were not reponding to it and I decide to do common and control c to see if it would work and it did and after that everything has been working fine except for the files are loading slowly. Also I had another issue with the laptop sleeping so quick as soon I am using the Internet. There was one other problem that had happen to me just like my description in my first scene, but I do not remember that issue.
Please no spamming, flaming and being plain rude to me and others. If you can not listen, read, or under stand my warning you will be kicked off from posting on threads buy a froum monitor. Pleas and thank you for posting and helping me out with fixing my problems.

IBM OS ISSUE: SYSTEM HANG WITH JFS2 AND HEAVY LOAD

제품 : ORACLE SERVER
작성날짜 : 2004-11-24
IBM OS ISSUE: SYSTEM HANG WITH JFS2 AND HEAVY LOAD
==================================================
PURPOSE
이 문서는 IBM AIX5L OS 상에서 Arch Process가 online redo log
를 release하지 못하고 OS의 kill 명령으로 kill조차 되지 않을 경우
조치 방법이다.
Problem Description
이 문서는 다음 OS 정보와 Oracle version인 경우에 해당한다.
Oracle Server - Enterprise Edition - Version: 9.2.0.5.0
Oracle Server - Enterprise Edition - Version: 8.1.7.4.0
AIX5L Based Systems (64-bit) or (32-bit)
문제 발생 당시의 증상은 다음과 같다.
- arch-process doesn't release redolog files
- arch-process doesn't die after database shutdown
- arch-process can't be killed
genclntsh 수행 시 hang 상태이다.
(sleeping...)28590: kwaitpid(0x2FF22470, -1, 4, 0x00000000, 0x00000000)
또는 이 문제로 인하여 ORA-600[2103] 에러가 발생하기도 한다.
이 에러가 발생하는 원인은 IBM AIX5L 64bit, 32bit OS 이슈에 있다.
IBM OS issue: SYSTEM HANG WITH JFS2 AND HEAVY LOAD.
Workaround
none
Solution Description
OS AIX5L ML4.0(5.2.0.40)의 bos.up / bos.mp / bos.mp64 fileset level을
갖는 JFS2 file system을 갖는 경우에 해당한다.
AIX 5.3 APAR IY59387은 IY58143에 포함되어 있다.
JFS2 file system에 Heavy I/O activity가 발생하면 database process에
HANG 문제를 야기시킬 수 있다. 이 때 database process가 kill -9
명령으로 kill되지 않는다. 데이타베이스를 SHUTDOWN하여도 Process가
계속 살아 있게 된다.
Process에게 SIGKILL 함수가 issue되었지만 영향을 주지 않게 된다.
Process를 제거하는 유일한 방법은 OS를 reboot하는 것이다.
문제를 예방하는 방법은 IBM APAR-FIX IY59082 를 적용하는 것이다.
이 APAR는 bos.64bit 5.2.0.42에 포함되어 있다.
Fix :
Need to install the IBM APAR-FIX IY59082, this APAR is included on
bos.64bit 5.2.0.42.
(주) IBM 엔지니어에게 확인 결과 이 Patch 안에 AIX5L 32bit 용과 64bit
용이 모두 포함되어 있는 것으로 확인됨.
Reference Documents
<Note:285158.1>

b,
The install was from my original Dell XP Pro-SP1 'Reinstallation' CD along with the complete MS XP-SP2 download that I burned to another CD. I also had all the latest Dell drivers from their website burned to a CD. Install went as follows:
- Format HD
- Install XP Pro SP1
- Install SP2
- Install Dell Drivers
- Obtain any MS patches from their site
- Install Office
- Update Office from the MS website
- Install iTunes
- Tweak MS settings
- Install many software programs
- Make an interim Image of system and store to ExHD
- Install other software programs (mostly security programs)
- Make another 'complete' Image to ExHD
- Restore backup data and music
After additional testing last night, I determined that it is not iTunes at all (or to blame). I get intermittent hangs/freezes/pauses in other media players (WMP, etc.).
Seems that something is causing the 'System' process to periodically jump up in CPU %age (though not more than 30-50%). Even this relatively small amount is enough to pause the playback of music or video, hang the mouse movement for a brief moment, or delay a menu opening. All very subtle - you have to be looking for it to notice (except with real-time audio-video, which is quite noticeable whenever this happens).
I had this problem a year ago, which is why I reimaged then and stayed with SP1 on the advice of Dell and Webroot. I'm stumped as to where to look for the culprit. Every time I go back to the original HD with SP1, everything runs smoothly. Some sort of system call is generating this complete pause....
I'll be limited in my Internet ability for the next several days, so I may be out of touch until Friday. I'll keep testing and playing with the limited equipment I take along....
Any thought you or others want to toss out, I'll attempt when possible.
Thanks!

Firefox 11 beta is having issues loading Flash and HTML content, shows plain text instead of images

I'm not sure what is causing the problem but it has been happening since beta 10 and now its also in beta 11. Randomly when I load any web page the page is displayed in plain text leaving all the HTML or flash content blank. Yes I have the most recent version of flash installed along with Java just in case it was looking for that mess as well. Sometimes the pages load fine, and sometimes they don't, it's like playing lotto with the internet. The only fix I know of is to either keep refreshing the page and "hope" it catches it on the reload, or closing Firefox and running CCleaner. Some times FF will load some of the visual data and leave gaps but usually its just basic text mode. I'm at a loss as to whether the problem is from Firefox or my ISP being a douche, either way its annoying that Firefox is not showing internet pages like it used to.
Hate to see it happening but it looks like Firefox is on its way to being just another Internet Explorer clone (failure). Should have stayed with your original team, all the new folks you have hired are really mucking up the whole project and its goal of a free and open internet. Not to mention writing bad code and costing you money and more importantly the user base.
(Update, now it's not doing it go figure, but I'm sure it will do it again at some point, perhaps its not Firefox and something else, I'll keep my eye on it and try to report any findings)

If you use extensions (Tools > Add-ons > Extension) like Adblock Plus or NoScript or Flash Block that can block content then make sure that such extensions aren't blocking content.
Start Firefox in [[Safe Mode]] to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Two issues: activation of transfer rules and data load performance

hi,
I have two problems I face very often and would like to get some more info on that topics:
1. Transfer rules activation. I just finished transport my cubes, ETL etc. on productive system and start filling cubes with data. Very often during data load it occurs that transfer rules need to be activated even if I transport them active and (I think) did not do anything after transportation. Then I again create transfer rules transports on dev, transport changes on prod and have to execute data load again.
It is very annoying. What do you suggest to do with this problem? Activate all transfer rules again before executing process chain?
2. Differences between dev and prod systems in data load time.
On dev system (copy of production made about 8 months ago) I have checked how long it takes me to extract data from source system and it was about 0,5h for 50000 records but when I executed load on production it was 2h for 200000 records, so it was twice slower than dev!
I thought it will be at least so fast as dev system. What can influence on data load performance and how I can predict it?
Regards,
Andrzej

Aksik
1 How freequently this activation problem occurs. If it is one time replicate the datasource and activate thetransfer structure( But in general as you know activation of transfer structure should be done automatically after transport of the object)
2 One thing for difference of time is environmental as you know in production system so many jobs will run at the same time so obiously system performance will be slow compare to Dev System. In your case both the systems are performing equally. You said in dev system for 50000 records half an hour and in production 200000 records 2hrs so records are more in Production system and it took longer time. If it is really causing problem then you have to do some performance activities.
Hope this helps
Thnaks
Sat

Urgent issue, Suddenly no data is extracted Once I create new infopack

Hi,
I have an urgent issue and need help.
We were loading data after activating business content. Every thing worked fine and the delta load was also smooth.
However, in order to start everything afresh, I deleted all the info package, deleted the "Intialization option for the source system" AND then created my infopackage for Full upload with initialize option.
In this case the extractor didn't find any data. Please see the following log from the monitor "status " Tab.
"No data available
Diagnosis
The data request was a full update.
In this case, the corresponding table in the source system does not
contain any data.
System response
Info IDoc received with status 8.
Procedure
Check the data basis in the source system."
This is not correct since we were loading data ( full and delta ) successfully before and there are data in the system. This is most probably to do with the delta queue initialization in the source system.
We were looading data from datassource 0CRM_SALES_ORDER_I.
Please help, we are really stuck.
Thanks
Arunava

hi Anurava,
take a look oss note 692195, i think authorization issue
Activities : 0CRM_SALES_ACT_1
oss 692195
Question 2 : On executing transaction RSA3 I get records but I find 0
records when I load data from BW request.(No Data Available).
How can I extract data in this case?
Suggestion 2: First check if there are any entries in the table
CRMD_ORDER_INDEX.Only if there are entries in this table you can
extract records.
If this is not the case then,
It is possible that the user does not have sufficient
authorities for extraction of the relevant objects.
Additionally, please review and implement the following notes
615670
161570
150315
618953
If you are in the release 4.0 then
To do BW extraction with the user please see that the following
authorization object exists(display mode is enough):
CRM_ACT, CRM_OPP, CRM_LEAD, CRM_SAO, CRM_SEO, CRM_CO_SE, CRM_CO_SC
CRM_CO_SA, CRM_CON_SE, CRM_CMP, CRM_ORD_OP, CRM_ORD_LP, CRM_ORD_PR
CRM_ORD_OE, CRM_CO_PU, CRM_CO_PD, CRM_ORD_PO
(all these objects are linked to transaction crmd_order).

Urgent.. issue in MM loading: 2lis_02_scl and 2lis_02_itm

Similar Messages

Maybe you are looking for