Urgent: Issue while accessing MSS through portal

Hi All,
Recently HRSP 70 was applied to R/3 system. And after that we are getting scenario does not exist when clicked on MDT->Reporting->choose report e.g. Education->Select people -> and start report through portal.
And we got Scenario does not exist error.
We referred HRWPC_FC_EXEC error and applied following settings :
For service: sap/bc/gui/sap/its/hrwpc_fc_exec
1) Go to GUI Configuration and set the following parameter
    Parameter name: ~webgui_theme
    Value: sl
2) Then go to transaction SITSPMON -->Template and Mimes tab
    Invalidate template caches
After this what is happening is a bit wierd though a workaround is found.
Now when user clicks start report through portal he gets a popup for SAP inbox mentioning there are xx documents unread, if he clicks on ok he again gets "scenario does not exist" . However if he goes and reads all the documents in inbox and then again execute start report through portal he can see the desired output.
Now still if we just go to sicf transaction in R/3 and just right click on HRWPC_FC_EXEC and execute Test Service we still get Scenario does not exist
Also note we have reports iview with MSS1 scenario and viewgroup in Selection Criteria is a Z group
Where in R/3 side should these entries be maintained ?
Can anyone please suggest what would be the connection of unread documents here with scenario ? And where is scenario missing ? Kindly let me know if any other input is needed.

Hi Joyce,
Yes we were able to resolve it, we added one more parameter "NO_LOGON_USEREXIT" with value "1" in GUI configuration of the service "HRWPC_FC_EXEC". This resolved our issue.
Try it at your end , let me know if any issue.
Regards,
Jalpa Shukla(Bhatt)

Similar Messages

Enable to select a check box in ALV while accessing it through portal

Hi All,
Currently I have given a link on portal to run a transaction code. The output of the program is ALV report, where user any select the check boxes.
Now when I try to select a check box, it is not getting selected. I click on the checkbox, the tick appear and then the screen refreshes itself and the tick goes off. This is happening only when accessing it through portal. If i run the program in R/3 directly, I am able to select the check box.
Please advice on this.
Thanks
Namit

Reported to SAP for the same.

Performance Issue while access reports through Infoview.

Users run reports( Webi ,Crystal ) through Infoview u2013 Accessed by Categories , while navigating between categories( we have different categories : Sales, Purchasing..Etc ) in the Infoview is fine ,it takes time to show all the reports within the categories ,which takes around 3 u2013 5 mins , but run time of the each reports are quick and as expected.
In CMS , while navigating between categories and time taken to show all the reports within the categories are fine . couldnu2019t not understand why this is happening in infoview only.
Would like to know if any one have similar issues. Is there any settings needs to made on the tomcat server or CMS or Infoview. Searched for OSS notes and found a note : 1206095 but it is for Enterprise XI release2.
Product Details :
BOE XI3.1 SP3 .
Any info will be helpfull.

Hello,
- Is Tomcat installed on the same server as BOE? If not, did you use wdeploy to deploy the WAR files? https://bosap-support.wdf.sap.corp/sap/support/notes/1325139
- Do you have more than one Tomcat server, and is it fronted by a load balancer. If it is, try bypassing the load balancer and access InfoView directly without going thru the load balancer.
There is a CMS command-line options that might help you improving performances in your environment.
That switch is named -maxobjectsincache which allows you to increase the maximum number of objects that the CMS stores in its memory cache. Increaseing the number of objects reduces the number of databases calls required and can improve CMS performance.
The default value for this option is 10000 and the maximum value is 100000. Please keep in mind it is not recommended to exceed 100,000 as too many objects in memory will result in the CMS degradation. I would suggest testing with 60,000.
Regards,
Wallie

Issue while accessing links on portal

Hi,
Are there any special configuration steps to be taken in ACE configuration when we redirect users depending on url values?
we have our main website https://abc.com and it provides links to users for various applications.
If i go to https://abc.com and click the link xyz on it, i get back to main page again and current connections drops to 0. here my browser should be redirected to https://abc.com/xyz which is not happening.
But if i type in https://abc.com/xyz in browser, i go to correct page.
below is my configuration. please let me know if any other configuration is needed, Below config is with 2 links but actual production has many links.
I have similar issue for another application where links on main page can not be accessed. that application works on http instead of https.
rserver redirect xyz
inservice
webhost-redirection "https://abc.com/xyz"
rserver redirect uvw
inservice
webhost-redirection "https://abc.com/uvw"
rserver host abc
ip address 1.1.1.1
inservice
serverfarm redirect xyz
rserver xyz
inservice
parameter-map type http case_param
case-insensitive
no persistence-rebalance
set header-maxparse-length 65535
set content-maxparse-length 65535
length-exceed continue
parameter-map type ssl abc
cipher RSA_WITH_3DES_EDE_CBC_SHA
ssl-proxy service abc
key abc
cert abc
ssl advanced-options abc
serverfarm redirect uvw
rserver uvw
inservice
serverfarm host abc
rserver abc
inservice
class-map type http loadbalance match-any map1
   match http url "/xyz"
class-map type http loadbalance match-any map1
   match http url "/uvw"
policy-map type loadbalance first-match ssl-abc
class map1
    serverfarm xyz
class map2
    serverfarm uvw
class class-default
    serverfarm abc
class ssl-intranet
    loadbalance vip inservice
    loadbalance policy ssl-abc
    loadbalance vip icmp-reply active
    nat dynamic 1 vlan 368
    appl-parameter http advanced-options case_param
    ssl-proxy server abc

HI,
Try enabling persistence-rebalance, the parameter should look like this:
parameter-map type http case_param
case-insensitive
persistence-rebalance
set header-maxparse-length 65535
set content-maxparse-length 65535
length-exceed continue
Cesar R
ANS Team

URGENT: issue while creating user through reconciliation of AD

Hi,
We have a requirement where we need to create users in IDM through reconcilition against Active Directory. For certain type of account Ids I want to trigger a custom workflow used for user creation. So I set "viewOptions.Process" to my custom workflow in the user form assigned to the admin who is the proxy admin for the reconcilaition process. But it doesn't seem to kick off my custom workflow. Will this work? Is this the correct form to specify the custom workflow to be triggered?
Also I tried putting some trace satements in the default "Create User" workflow to see that if it is being called during user creation by recon. In the logs I don't see my trace statements. So the question is: Which is the workflow that is called when a user is created through reconciliation? How to specify a custom workflow name in this regard?
Thanks,
kIDMan.

I'm wondering if you have an answer to this?
I need to do a similar thing. For me, I reconcile against an oracle DB and there are Active and Inactive users. I only want to reconcile Active users. I put the following code in the user form but it still created Inactive users. "Exclude Inactive User" is an empty WF that has only start and end activities.
<Field name='viewOptions.Process'>
<Expansion>
<s>Exclude Inactive User</s>
</Expansion>
<Disable>
<neq>
<ref>global.status</ref>
<s>I</s>
</neq>
</Disable>
</Field>

I'm facing performance issue while accessing the PLAF Table

Dar all,
I'm facing performance issue while accessing the PLAF Table.
The START-OF-SELECTION of the report starts with the following select query.
    SELECT plnum pwwrk matnr gsmng psttr FROM plaf
    INTO CORRESPONDING FIELDS OF TABLE it_tab
    WHERE matnr IN s_matnr
      AND pwwrk = p_pwwrk
      AND psttr IN s_psttr
      AND auffx = 'X'
      AND paart = 'LA' .
While executing the report in the Quality system it does not face any performance issue...
When it comes to Production System the above said select query itself it is taking 15 - 20 minutes time to move further.
Kindly help me to over come this problem...
Regards,
Jessi

Hi,
"Just implement its primary Key
WHERE PLNUM BETWEEN '0000000001' AND '9999999999' " By this you are implementing the Primary Key
This statement has nothing to do with performance, because system is not able to use primary key or uses every row.
Jessica, your query uses secondary index created by SAP:
1     (Material, plant) which uses fields MANDT MATNR and PLWRK.
but it is not suitable in your case.
You can consider adding new one, which would containt all fields: MANDT, MATNR, PWWRK, PSTTR AUFFX PAART
or - but it depends on number of rows meeting and not meeting (auffx = 'X' AND paart = 'LA' ) condition.
It could speed the performance, if you would create secondary index based on fields MANDT, MATNR, PWWRK, PSTTR
and do like Ramchander suggested: remove AUFFX and PAART from index and where section, and remove these unwanted rows
after the query using DELETE statement.
Regards,
Przemysław
Please check how many rows in production system

Performance issues while accessing the Confirm/Goods Services' transaction

Hello
We are using SRM 4.0 , through Enterprise Portal 7.0.
Many of our users are crippled by Performance issues when accessing the Confirm/Goods Services tab( Transaction bbpcf02).
The system simply clocks and would never show the screen.
This problem occurs for some users all the time, and some users for some time.
It's not related to the User's machine as others are able to access it fast using the same machine.
It is also not dependent on the data size (i.e.no . of confirmations created by the user).
We would like to know why only some users are suffering more pronouncedly, and why is this transaction generally slower than all others.
Any directions for finding the Probable cause will be highly rewarded.
Thanks
Kedar

Hi Kedar,
Please go through the following OSS Notes:
Note 610805 - Performance problems in goods receipt
Note 885409 - BBPCF02: The search for confirmation and roles is slow
Note 1258830 - BBPCF02: Display/Process confirmation response time is slow
Thanks,
Pradeep

Issue while accessing Hyperion Applications

Hi,
we successfully Installed Hyperion 11.1.2 on win 2008 server R2 . Essbase and Planning was working fine.
Now we are facing issue while connecting to Hyperion Shared services , Planning , Workspace URL's.
When we tested all the web applications was working fine. Tried restart of the server but did not work.
Below error comes up when we try to access these applications.
<------------
Error 404--Not Found
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.4.5 404 Not Found
The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.
If the server does not wish to make this information available to the client, the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.
------------->
Diagnostics show below details
WEB: Web Application Availability of Web application context http://INDCLDTC04.ind.cldsvc.accenture.com:8300/HyperionPlanning/
Error: com.hyperion.cis.utils.BadResponseCodeException: Bad response code with GET method: 404
Recommended Action: Check that the application is started
FAILED WEB: Web Application Availability of Web application context http://INDCLDTC04.ind.cldsvc.accenture.com:28080/workspace/status
Error: com.hyperion.cis.utils.BadResponseCodeException: Bad response code with GET method: 404
Recommended Action: Check that the application is started
Availability of Web application context http://INDCLDTC04.ind.cldsvc.accenture.com:10080/easconsole/console.html
Error: com.hyperion.cis.utils.BadResponseCodeException: Bad response code with GET method: 404
Recommended Action: Check that the application is started
Regards,
Vijaya

Did you register the Essbase application with Shared Service, do the following steps:
(EAS) console. Right click on the application name and select 'Register'.
application successfully registered. Log on to Shared Services and select the application to assign access control.
If the error is occurring with all Essbase applications, you can register all of them at one time:
Click 'Register all'. Confirm that all applications were successfully registered. Log on to Shared Services and try assign access control for all applications.
If the re-registration does not work from EAS you may need to reregister Essbase as a product.
Locate the product_config_#.xml in the directory EPM_ORACLE_INSTANCE/config/foundation/11.1.2.0/product/product_name
For example; the Essbase product file is located in EPM_ORACLE_INSTANCE/config/foundation/11.1.2.0/product/Essbaseserver/11.1.2.0
Open the file product_config_#.xml and locate the line:
<property_name>="hubRegistration">Configured</property>
Change the status from Configured to Pending.
Rerun 'startconfigtool.bat' or 'startconfigtool.sh' or the EPM System Configurator again and select the product. This enables you to reregister the product with Shared Services.
Now check with ur ULS

ABAP Dump issue while accessing Gateway

Hi
We have recently upgraded our Gateway server to SP03. Eversince after service generation while accessing the XML/Metadata from the consumption page we get an HTTP error with Dump. Has anyone faced this problem before.
<?xml version="1.0" encoding="utf-8" ?>
- <error xmlns:xsi="http://www.w3.org/2001/XMLSchema-Instance">
<code>HTTP/500/E/Internal Server Error</code>
<message>Call of service /sap/opu/sdata/sap/Z14335_RFC_BP_1/ terminated because of an error. The following error text was processed in system AC1 : Syntax error in program /IWCOR/CL_REST_HTTP_HANDLER===CP .The error occurred on the application server njsapnet3. The termination type was: RABAX_STATE.If the termination type is RABAX_STATE, you will find more information on the cause of termination in system AC1 in transaction ST22. If the termination type is ABORT_MESSAGE_STATE, you will find more information on the cause of termination on the application server njsapnet3 in transaction SM21. If the termination type is ERROR_MESSAGE_STATE, you can search for further information in the trace file for the work process in transaction ST11 on the application server njsapnet3. You may also need to analyze the trace files of other work processes. If you do not yet have a user ID, contact your system adminmistrator.</message>
</error>

Hi All,
I am also facing the same issue.
When i am executing query/read operation my service it will works properly and getting data also,but when i am trying get X-CSRF token it throws error(ABAP Dump) .Can you please help me out this issue.
Based on the Tx: ST11..getting below log.
A ABAP Program /IWCOR/CL_REST_HTTP_HANDLER===CP        .
A Source /IWCOR/CL_REST_HTTP_HANDLER===CCIMP      Line 40.
A Error Code ASSERTION_FAILED.
A Module abassert.c.
A Function ab_aabAssertionFailedRabax Line 1880.
A ** RABAX: level LEV_RX_STDERR completed.
A ** RABAX: level LEV_RX_RFC_ERROR entered.
A ** RABAX: level LEV_RX_RFC_ERROR completed.
A ** RABAX: level LEV_RX_RFC_CLOSE entered.
A ** RABAX: level LEV_RX_RFC_CLOSE completed.
A ** RABAX: level LEV_RX_IMC_ERROR entered.
A ** RABAX: level LEV_RX_IMC_ERROR completed.
A ** RABAX: level LEV_RX_DATASET_CLOSE entered.
A ** RABAX: level LEV_RX_DATASET_CLOSE completed.
A ** RABAX: level LEV_RX_ERROR_SAVE entered.
A ** RABAX: level LEV_RX_ERROR_SAVE completed.
A ** RABAX: level LEV_RX_ERROR_TPDA entered.
A ** RABAX: level LEV_RX_ERROR_TPDA completed.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
A ** RABAX: level LEV_RX_END entered.
A ** RABAX: level LEV_RX_END completed.
N
N Thu Jan 03 15:00:58 2013
N *** ERROR => System ID and client from ticket are not the same than mine. [ssoxxkrn.c   1065]
N {root-id=0050569E07B31ED295B108EAC1527575}_{conn-id=0050569E07B31ED295B108EABC707575}_1
N *** ERROR => Neither was ticket issued by myself nor can I find issuer in TWPSSO2ACL (see note 1055856). [ssoxxkrn.c   1071]
N {root-id=0050569E07B31ED295B108EAC1527575}_{conn-id=0050569E07B31ED295B108EABC707575}_1
i am getting based on Tx:ST22
Category
ABAP Programming Error
Runtime Errors
ASSERTION_FAILED
ABAP Program
/IWCOR/CL_REST_HTTP_HANDLER===CP
Application Component OPU-FND-CCL
Note: I am using SAP NW-GW-SP04
Thanks,
Syam

Issue while accessing a SQL Server table over OTG

Hi,
I have been learning oracle for about 1.5 years and am just starting to learn some OTG pieces. I am wondering about an issue. The issue is:
"We need help with an issue we are having while accessing a SQL Server table over OTG. We are getting the following error message in Oracle :
ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
[Oracle][ODBC SQL Server Driver]Unicode conversion failed {HY000}
The column it is failing on is "-----------" in the view --------------- in the SQL Server database pointed to by the Oracle DB Link ------------------- thats created in the Oracle instances ---- and -----.
This was working before, but is now failing, we suspect its due to new multi-byte data being added to the base table in the above column."
I took out the details and added ---- instead. I am wondering your guys thoughts on fixing this issue and helping me learn along the way. Thanks

Hi Mike,
Thanks for the response, here are the details:
1. What is the character set of the Oracle RDBMS being used. What is returned by -
select * from nls_database_parameters;
NLS_CHARACTERSET
AL32UTF8
NLS_NCHAR_CHARACTERSET
UTF8
We get SQL_Latin1_General_CP1_C1_AS and 1252 as Collation Property and Code Page
The datatype of the column in question in SQL Server is nvarchar(100).
When I do a describe on the SQL Server view ( desc CK_DATA_FOR_OPL@------- ), I get the error below;
ERROR: object CK_DATA_FOR_OPL does not exist
Select * from CK_DATA_FOR_OPL@------ where rownum =1 does get me a row.
create table tmp_tab as
Select * from CK_DATA_FOR_OPL@----- where rownum =1;
desc tmp_tab shows the datatype of the said column in the table created in Oracle as NVARCHAR2(150).
Not sure why a column defined with size 100 in SQL Server should come across as 150 when seen over OTG. We see something similar in DB2 tables we access over OTG as well.
Edited by: 993950 on Mar 15, 2013 8:49 AM

Can iPhone be infected with a virus while accessing websites through a third party app?

Hi there all, while accessing a newly found video website via a third party app on my iPhone 5, a window suddenly appears saying "your iPhone has been infected by a virus" and then gave a link to click "to prevent further damage from happening." I chose to ignore the message since it's always been my understanding that iPhones are relatively impervious to viruses, however, since the pop up was now preventing me from doing anything else with the app, I just closed out the application entirely then rebooted the phone (just to be safe) and it's been working fine ever since. I suspect this pop up was a fear based ploy intended to scare me into clicking the link being provided. Am I correct, or is it actually possible for a virus to infect an iPhone just by going to an unscrupulous website without even downloading a file? I haven't opened or done anything with this third party app ever since. btw, my iPhone 5 is running iOS v8.1.2 and I've never had any issues with it in the past. If anybody can answer it would surely be appreciated, many thanks!

Several years ago, my oldest brother was stupid enough to let himself be duped into being a major participant in a personal situation having a direct impact upon me. Prior to the rift that developed which ultimately tore our relationship apart, I suggested we meet for lunch one day as all I was wanting was for him to be honest with me. Feeling guilty and hating all confrontation, he just had to get out of there, and so instead of answering my question he jumped up and shouted "YOU'RE ALWAYS DOING THAT TO ME!!" right in front of everyone at the restaurant. As a tension breaker I shouted right back, "didn't YOU ever learn the word ALWAYS should NEVER be said during an argument?" And so yes, you're right, I should have qualified my question more by saying "relatively impervious" instead. MY BAD!! I still want to say "THANKS" anyway for providing such a quick and accurate answer!

Facing Difficulty while accessing Worksheet through RRMX Transaction

Hi,
I am able to access & run worksheet through analyzer which we access through Start--> All Programs > BEx> Analyzer.
But while accessing same worksheet through RRMX transaction I am not able to access it or if try to find it with description, system gives message 'No entry found'.
Please help me on this.
Thanks,
Pradip

Make sure you have the latest patches for BEx installed. Also check whether in tcode RRMX_CUST you have the correct version set for BEx Analzyer.

*Security Error Issue while accessing youtube search method.

Hello All,
I am creating a flex aplication which has youtube videos search control. it works fine on local , but when I am trying to access this from any server its getting security error "[RPC Fault faultString="Security error accessing url" faultCode="Channel.Security.Error" faultDetail="Destination: DefaultHTTP"] " while accessing the search method url using httpservice. Can any one help me.
Thanks.

You may need to add the -use-network=true compiler argument. When in Flex Builder this does not matter as much:
From Flex Builder main menubar, Project - Properties - Flex Compiler - Additional compiler arguments: -use-network=true
If this post answers your question or helps, please mark it as such.

Issue while accessing two web-dynpro application, ESS/MSS and Payroll

Hi All,
We are facing one Critical Server Issue in our systems. Following is the scenerio:-
Our Portal system was having one Application known as German Payroll application. Before last two week one more application of ESS/MSS i.e. Time Management has been deployed to our system.
Now the user has two application with two different roles in the portal.
When user try to navigate from Time Management Application to German Payroll application or German Payroll Application to Time Management Application then they are facing Critical Server Error issue.
But once the user try to refresh using CTRL+F5 then the problem got resolved.
========================================================================
German Payroll applications back end server details:P95.
Time Management Application back end server details: P23
Steps to reproduce the issue:
1-login to portalgot to Employee self service tab-wait for 3-5mins
& than navigate to german payroll applications----& faced crtical
server errors:
Log from deafult trace:-
=======================================================
1.#0021280FECEE0028000000A400005A4B0004A2FA644F345C#1305096215265#com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent#sap.com/tcwddispwda#com.sap.tc.webdyn
pro.progmodel.generation.DelegatingComponent#km048893#2758##n/a##fa2a61757b9911e08e660021280fecee#SAPEngine_Application_Thread[impl:3]
_9##0#0#Fatal#1#/Applications/Xss#
Java###null
[EXCEPTION]
#1#com.sap.tc.webdynpro.modelimpl.dynamicrfc.WDDynamicRFCExecuteException
at
com.sap.tc.webdynpro.modelimpl.dynamicrfc.DynamicRFCModelClassExecutable.execute(DynamicRFCModelClassExecutable.java:107)
at com.sap.xss.ser.xssmenu.fc.ModelHandler.onInit
(ModelHandler.java:205)
at com.sap.xss.ser.xssmenu.fc.wdp.InternalModelHandler.onInit
(InternalModelHandler.java:428)
at com.sap.xss.ser.xssmenu.fc.FcXssMenu.setPersonnelNumber
(FcXssMenu.java:570)
at com.sap.xss.ser.xssmenu.fc.FcXssMenu.onInit
(FcXssMenu.java:292)
at com.sap.xss.ser.xssmenu.fc.wdp.InternalFcXssMenu.onInit
(InternalFcXssMenu.java:455)
at com.sap.xss.ser.xssmenu.fc.FcXssMenuInterface.onInit
(FcXssMenuInterface.java:165)
System 'P95' is not possible because RFC Metadata was retrieved using
System 'P23'. Please assure you have configured the RFC Connections
properly. A Server restart may
be necessary!#
==============================================================
here is the catch....When user is trying to navigate from ESS tab(using
custom jcos for Backend system P23) to German payroll(backend system
P95) after 3 mins ---getting crtical error...Still its using the
data/metadat jcos connection information of ESS applications from
cache...that you can see in default trace.
PS: Standards Jcos are configured for P23 systems:
====================================================
SAP_R3_HumanResources----created with P23
SAP_R3_HumanResources_MetaData----been created with P23
SAP_R3_SelfServiceGenerics----been created with P23
SAP_R3_SelfServiceGenerics_MetaData----been created with P23
=====================================================
P95----Germman payroll
P23---ESS/MSS
Name of Cutsomn Jcos created for bakcend P95 i.e. german payroll
A-P95
=======================================================
SAP_R3_HumanResources:D95
SAP_R3_HumanResources_MetaData:D95
SAP_R3_SelfServiceGenerics:D95
SAP_R3_SelfServiceGenerics_MetaData:D95 configured with sap-wd-arfc-
useSys.
Name of cutom jcos created for backend ESS/MSS P23
B-P23
=========================================================
SAP_R3_HumanResources_MetaData:X23
SAP_R3_HumanResources:X23
SAP_R3_SelfServiceGenerics:X23
SAP_R3_SelfServiceGenerics_MetaData:X23 configured with sap-wd-arfc-
useSys.
========================================================
Jcos parameter of P23 backend:
JCo Pool Configuration
Maximum Pool Size: 50
Maximum Connections: 100
Connection Timeout (msec.): 10000
Maximum Waiting Time (msec.): 30000
Jcos parameter of P95 backend:
JCo Pool Configuration :
Maximum Pool Size: 5
Maximum Connections: 10
Connection Timeout (msec.): 10000
Maximum Waiting Time (msec.): 30000
===================================================================
After more analyzing the situation we found that one web dynrpo component i.e. pcui_gp~xssutils is common to both the application and it is configured to standard JCO i.e.
SAP_R3_HumanResources
SAP_R3_HumanResources_MetaData
SAP_R3_SelfServiceGenerics
SAP_R3_SelfServiceGenerics_MetaData
My thinking is that this component is giving us the problem.
Please provide your comments and solution to rectify this issue.
Also, let me know in case you need more information.
Thanks in Advance
Kuldeep Verma

Hi
First try a very simple application with nothing in it just one text saying Hello World
Run it and see what happens.
Also check if your url uses FQDN name. something like https:
company.name.co:50000\.......
If you do not use the FQDN it will always show a script error on the bottom and some functions will not work e.g
dropdowns.
regards
Yuval.

Issue while executing report in Portal

Hi All,
We have come across a typical error in the portal while the user access her reports .When ever user is clicking on the report
in the portal a total blank screen( or white screen rather ) is visible and they have to log out and log in very frequently.We have suggested them to clear their cache in their desktops to avoid this situation , but they are complaining that this blank screen is coming very frequently now. Does this have any thing to do with the reports. We dont have authorizations for this application currently and they are pretty straight forward ones and with not many CKFs/RKFs .Also we have went live in jan 2010 for this application and there is very limited data in the cube as well ,
Any of your suggestions and appreciated in this regard,
Regards,
Sasidhar Gunturu

Hi SasidharG
Please run the support desktool in its latest version 77.... and then look at the systeminfo.txt file that the tool produces... this is an automated report designed by SAP development to run through all areas of portal/bi connectivity issues on a users portal and to provide remedies to any issues found. (Please see note: 937697) this does involve a bit of work at the outset but it is a very valuable tool which will enable you to fine turn your bi/portal connectivity.
best regards
Orla.

Urgent: Issue while accessing MSS through portal

Similar Messages

Maybe you are looking for