Urgent!!:::J2EE processes are not seen in SAPMMC

Hi experts,
I installed WAS 04s on my pc. But for that i used administrator login(for window), after intallation i switched to my usual login(for window). Here i tried to run the SAPMMC but surprisingly i could not see the J2EE processes(server, SDM and dispatched) running which were there through administrator login.
Could you please tell whats the problem and how to get around this?
Regards,

Harini,
I must tell you, YOU have been amazing on EP forum.
Anyway, I solved that problem, but problems seem not getting over..
I launched my NWDS and mention the localhost as my J2EE Engine but when i see that in the Dynpro perspective the status of J2ee engine is shown as N/A. Even if i change this J2EE engine to some other earlier servers, the status is shown as N/A. I dont know why the status is shown as N/A when server is up which i checked through SAPMMC.
Could you please help me out? please its very urgent.
Regards,

Similar Messages

Attachments and history of my emails are not seen by Windows users

attachments and history of my emails are not seen by Windows users

Just guessing at what you mean, try this:
In Mail, while composing a message, go to Mail's menu and click:
Edit > Attachments > Always send Windows-friendly attachments

In my iPad mini some apps are not seen (voice recorder, calculator, compass etc)

in my iPad mini some apps are not seen (voice recorder, calculator, compass etc)er

Those apps aren't included in iOS on iPads
iPad Mini built-in apps : http://www.apple.com/ipad-mini/built-in-apps/
iPad manual (which has a chapter on each of the built-in apps) : http://support.apple.com/manuals/ipad/

Colormunkie Photo printer profile (*.ICM and *.ICC ) are not seen by LR4.2 in the Print Job section

Colormunkie Photo printer profile (*.ICM and *.ICC ) are not seen by LR4.2 in the Print Job section
I used Colormunkie Photo to create an .ICM file for printer calibration. When that failed I tried changing the suffix to .ICC. Under neither circumstance did LR4.2 display the file in the menu to select printer profile. There were several display files with both suffixes but no printer files at all. I tried three times with no success and cannot think of what else to try. The first two were the same. I varied the file creation name suffix in the third. Help will be appreciated. My OS is Win 7 ultimate SP1 Printer is HP 2550L laserjet.

Tillman
Glad you found your answer, Colormunki is smart enough to figure out the color space for the printer as I found out - But for quality work the latest generation of inkjet printers from Epson and Canon are hard to beat, and compared to a laserjet the quality is like night and day. The other benefit of changing up to an inkjet printer is the choice of papers available which you could not put through a laserjet.
I had a colleague that tried printing on Photoglossy paper through his color laser and it fried the fuser, and HP, while they replaced the fuser unit under warranty, made it very clear that that was a daft thing to do.
So if I were in your position I would go with an inkjet and you will then enjoy the benefits of better quality output, better paper choices and with your Colormunki be able to make custom profiles that will work in LR
Cheers
Mike

BPEL Processes are not showing in BPEL Console after OPMN restart

Hi All,
BPEL Processes are not showing in BPEL Console after OPMN restart. It was showing earlier before restart.
Can some one help on this?
Thanks

Vikky,
Are you using 10g?
If BPELConsole is up but you don't see any process, you can go to the log files and see what is the problem.
It might relates to permissions, or DB issues etc....
Arik

Golden gate extract and replicate process are not running.

All,
I am trying replicate data between two oracle databases using golden gate.
I am trying this scenario in a single machine(two databases and golden gate are on same windows machine)
1. I have two databases PROD, UAT both are running on 11.2 oracle home.
2. Created the ggate user both the databases, and enabled supplemental logging.
3. Ran the following scripts in both databases.
SQL> @marker_setup.sql
SQL> @ddl_setup.sql
SQL> @role_setup.sql
SQL> grant GGS_GGSUSER_ROLE to ggate;
SQL> @ddl_enable.sql
4. Connected the source database (PROD) in ggsci prompt
GGSCI (home-c07402bbc5) 79> add extract ext1, tranlog, begin now
add exttrail C:\app\Bhanu\Goldengate\lt, extract ext1
edit params ext1
EXTRACT ext1
USERID ggate@PROD, PASSWORD 123456
RMTHOST home-c07402bbc5, MGRPORT 7840
rmttrail C:\app\Bhanu\Goldengate\lt
ddl include mapped objname bhanu.* // bhanu is a schema in PROD database.
TABLE bhanu.*;
5. Connected the target database(UAT) in ggsci prompt
add checkpointtable ggate.checkpoint
edit params ./GLOBALS
GGSCHEMA ggate
CHECKPOINTTABLE ggate.checkpoint
add replicat rep1, exttrail C:\app\Bhanu\Goldengate\Mt,checkpointtable ggate.checkpoint
edit params rep1
replicat rep1
ASSUMETARGETDEFS
userid ggate@UAT, password 123456
discardfile C:\app\Bhanu\Goldengate\rep1_discard.txt, append, megabytes 10
map bhanu.*, target kiran.*;
After that started the extract, replicat using
start extract ext1, start replicate rep1
Now the status.
GGSCI (home-c07402bbc5) 103> info all
Program Status Group Lag Time Since Chkpt
MANAGER RUNNING
EXTRACT STOPPED EXT1 00:00:00 00:11:43
REPLICAT STOPPED REP1 00:00:00 00:21:16
Can you please help me what is wrong in my setup and why extract and replicate process are not running.
Edited by: user12178861 on Nov 19, 2011 11:22 AM

Thanks for your quick reply.
I have done few changes but extract, replicate process not running.
couple of points I would like to share with you regarding my setup.
1. I am using single golden date instance to replicate the data between PROD and UAT databases.
2. GGSCI (home-c07402bbc5) 1> dblogin userid ggate@PROD,PASSWORD 123456
Successfully logged into database.
GGSCI (home-c07402bbc5) 2> info all
Program Status Group Lag Time Since Chkpt
MANAGER RUNNING
EXTRACT STOPPED EXT1 00:00:00 01:23:29
REPLICAT STOPPED REP1 00:00:00 01:33:02
GGSCI (home-c07402bbc5) 3> VIEW REPORT EXT1
ERROR: REPORT file EXT1 does not exist.
GGSCI (home-c07402bbc5) 4> start er *
Sending START request to MANAGER ...
EXTRACT EXT1 starting
Sending START request to MANAGER ...
REPLICAT REP1 starting
GGSCI (home-c07402bbc5) 5> VIEW REPORT EXT1
ERROR: REPORT file EXT1 does not exist.
GGSCI (home-c07402bbc5) 6> info all
Program Status Group Lag Time Since Chkpt
MANAGER RUNNING
EXTRACT STOPPED EXT1 00:00:00 01:24:10
REPLICAT STOPPED REP1 00:00:00 01:33:44
Target :
GGSCI (home-c07402bbc5) 1> dblogin ggate@UAT,PASSWORD 123456
ERROR: Unrecognized parameter (GGATE@UAT), expected USERID.
GGSCI (home-c07402bbc5) 2> dblogin userid ggate@UAT,PASSWORD 123456
Successfully logged into database.
GGSCI (home-c07402bbc5) 5> add replicat rep1, exttrail C:\app\Bhanu\Goldengate/lt,checkpointtable ggate.checkpoint
ERROR: REPLICAT REP1 already exists.
GGSCI (home-c07402bbc5) 6> delete replicat rep1
Deleted REPLICAT REP1.
GGSCI (home-c07402bbc5) 7> add replicat rep1, exttrail C:\app\Bhanu\Goldengate/lt,checkpointtable ggate.checkpoint
REPLICAT added.
GGSCI (home-c07402bbc5) 8> edit params rep1
GGSCI (home-c07402bbc5) 9> start er *
Sending START request to MANAGER ...
EXTRACT EXT1 starting
Sending START request to MANAGER ...
REPLICAT REP1 starting
GGSCI (home-c07402bbc5) 10> info all
Program Status Group Lag Time Since Chkpt
MANAGER RUNNING
EXTRACT STOPPED EXT1 00:00:00 01:29:46
REPLICAT STOPPED REP1 00:00:00 00:00:48
3. Is mandatory that I need two golden gate instances running each side ?
Thanks for spending your time on this problem.

How do i set colors on javascript coding page, colors are not seen after installing Firefox version 8

How do i set colors on javascript coding page, colors are not seen after installing Firefox version 8 . I am using WaveMaker application for web development

Make sure that you allow pages to choose their colors and that you haven't enabled High Contrast in the Accessibility settings.
*Tools > Options > Content : Fonts & Colors > Colors : [X] "Allow pages to choose their own colors, instead of my selections above"
*http://kb.mozillazine.org/Website_colors_are_wrong
*http://kb.mozillazine.org/Websites_look_wrong

TS2512 i m trying to convert dpx files to mov in colour 1.5.3 but in file browser files are not seen in proper order for ex files names are 12345 it is coming as 23145 bcoz of which in output also its coming in wrong order

i m trying to convert dpx files to mov in colour 1.5.3 but in file browser files are not seen in proper order for ex files names are 12345 it is coming as 23145 bcoz of which in output also its coming in wrong order

1) What you downloaded should be a packed file (zip, tar.gz, etc) that needs to be unpacked into the directory of your choice.
2) & 3) are answered by Ant's installation documentation (the page you're quoting from):
http://ant.apache.org/manual/index.html

I have an iPhone, an iPad, 2 iPad mini's and 2 iPod Touch's that all share the same apple id. I want to separate the iPhone so that texts are not seen on the other devices but I still want them to have the iMessage ability. How do I do that?

I have an iPhone, an iPad, 2 iPad mini's and 2 iPod Touch's that all share the same apple id. I want to separate the iPhone so that texts are not seen on the other devices but I still want them to have the iMessage ability. How do I do that?

Not sure if you can have 2 Apple ids contact Apple.com/I'd You may to set IPhone up as new with a different Apple ID & password. Bsydd uk

Contacts created with Lotus notes are not seen in Exchange 2007 SP3 Rollup 7.

Contacts created with Lotus notes are not seen in Microsoft Exchange 2007 SP3 Rollup 7. the same is seen in Microsoft Exchange 2010 without issues.
when we create a new contact on Microsoft Exchange 2007, the contacts gets created but it is not seen unless we filter the EMC to list the contacts. Microsoft Exchange 2010 does not have any issues.
any help or inputs will be appreciated.
Thanks,
Sid

You shouldn't be using the 2007 EMC or cmdlets to create new objects if you have a more recent release installed in your organization. Use the 2010 software.
If you create the mail-enabled contact with the 2010 EMC or cmdlets do you see it in the 2007 EMC?
When you say the contact "is not seen unless we filter the EMC to list the contacts", does that mean you don't see the contact when you're looking at the "Recipient configuration" container? Is there a default filter on that container? Do you have a limit
on the number of objects shown?
As for the objects created by 3rd-party software (Lotus), are they creating the contacts correctly?
--- Rich Matheisen MCSE&I, Exchange MVP

Not Urgent ..... Some GP processes are not coming to UWL

hi,
iam initating a process using runtime.
And after completing the first action i am sending the next action to another user which is determined by input parameter.
But that process is not showing in the UWL,but it is coming in GP runtime.
The process is coming in the UWL for all users which determined at the time of initiation.
<removed by moderator - please read the [Rules of Engagement|https://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement] - they explain why you should not post"urgent" in here>
With regards
Shanto Aloor
Edited by: Mike Pokraka on Jul 14, 2008 6:52 PM

Hi,
Have you created new system in UWL Administration (System Administrator -> System Configuration -> Universal Worklist u2013 Administration) with Guided Procedures Connector?
If no, check these links:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/6b66d7ea-0c01-0010-14af-b3ee523210b5
http://help.sap.com/saphelp_nwce10/helpdata/en/43/ef06a7860c7061e10000000a1553f6/content.htm
Otherwise, check Delta Pull Channel Refresh/Snapshot values (edit in GP system).
Reward points if itu2019s helpful.

Urgent ..... Some GP processes are not coming to UWL

hi,
iam initating a process using runtime.
And after completing the first action i am sending the next action to another user which is determined by input parameter.
But that process is not showing in the UWL,but it is coming in GP runtime.
The process is coming in the UWL for all users which determined at the time of initiation.
Pls help me it is urgently needed
With regards
Shanto Aloor

Hi,
Have you created new system in UWL Administration (System Administrator -> System Configuration -> Universal Worklist u2013 Administration) with Guided Procedures Connector?
If no, check these links:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/6b66d7ea-0c01-0010-14af-b3ee523210b5
http://help.sap.com/saphelp_nwce10/helpdata/en/43/ef06a7860c7061e10000000a1553f6/content.htm
Otherwise, check Delta Pull Channel Refresh/Snapshot values (edit in GP system).
Reward points if itu2019s helpful.

BB Passport: After upgrading to 10.3.1, the USB key are not seen by the OS

Blackberry Passport:
After upgrading to 10.3.1 Any kind of USB key is not seen by the OS, even after restarting the operating system.
With original OS 10.3 could connect USB key to transfer my photos with file manager.
Any suggestions?

There a lot of issues being discovered by users doing the upgrade OTA or using Link. And they are varied. It's had to say whether your problem another of these issues or something else. Those I trust are recommending a clean OS install using an autoloader as so far there are not the same problems afterward.
You could try the autoloader route. Do a backup first. After the clean OS install, test before you do a restore and install app. If problem is gone, then you know the clean OS works. The next question will be if the problem returns when you restore or add apps.
- Ira

Java related processes are not comingup

Hi,
We have copied our current kernel into a new library and had switched to new kernel library. There after, the processes, DISPATCHER, SERVER0, SDM AND JCONTROL are not coming up. Remaining all processes are normal. Afterwards, we had revert back to the same old kernel and even then there is no change in the situation. What could I do to make the Java processes up?
We are on V5R4.
Thanks
Kiran

Hello Kiran,
sorry for the inconvenience but note 904977 didn't told you all the things. I updated the note by today but it is not yet translated. If you apply the latest R3OPT file as described in note 904977 and you have an Java instance running as add-in, then you have to run following command after APYR3KRN:
APYJ2EELIB SID()
BTW, the file R3OPT is not a real patch (unless you can find the file in the patch download area). It leads always into a completely new kernel library. You may not apply this file to an existing kernel library. After the APYJ2EELIb, the ABAP and Java instances are using the same kernel library. If you do not prefer this you can create also a 2nd library from the R3OPT file for the Java instance. But both parts have to fit together.
Best regards,
René Lang
SAP on System i Development

OID is up & running but "ldap" process are not running

Hi all,
Oracle Internet Directory is up & running but LDAP processes ( Not Running ---- Process oidmon
Not Running ---- Process oidldapd
Not Running ---- Process oidrepld
Not Running ---- Process odisrv) are not running.
I am trying to configure SSO for reverse proxy server and ran the command ssocfg.sh https proxyServerName proxyServerPort
and when i am trying to go for next step that is ldapmodify -D cn=orcladmin -w welcome1 -v -f setdasurl.ldif
it is showing up cannot connect to LDAP server. and also when i am trying to acess SSO admin Server the redirection url is showing up with 404 page not found error.
pls help me
Thanks

Do 'oidctl status' and check if the 'oidldapd' is up and running. If not, start 'oidmon' by executing the command 'oidmon start'.
To start 'oidldapd', use 'oidctl' command.
Eg: oidctl connect=<sid_name> server=oidldapd instance=<instance_num> start
Sometimes, when you start 'oidmon', the 'oidldapd' process is also started. So, its a good idea to do 'oidctl status' after 'oidmon start'

Urgent!!:::J2EE processes are not seen in SAPMMC

Similar Messages

Maybe you are looking for