Urgent: Keyfigure length

Hi,
Defined one infoobject keyfigure zactdays of number type.
In the transfer structure its length is showing 17.
Is it by defualt and can i change to 8.
Thanks
MK

hii
in R/3 field cust has lenth 14.
creat a objet in bw with 14.
where do u have prob ?
regARDS,
MANGRA

Similar Messages

Data type length mismatch -urgent pls

In the following query i have done a comparision in where clause as follows
OBJECTID = itab2-kdauf
(char length = 90) (char length =10)
it says the error that required same same length.
how to solve this problem, help me pls, very urgent.
select OBJECTCLAS
 OBJECTID
 CHANGENR
 TABNAME
 TABKEY
 FNAME
 CHNGIND
 VALUE_NEW
 VALUE_OLD
 from cdpos into corresponding fields of table ipos
 for all entries in itab2
 where tabname = 'VBAP' and
 fname = 'ABGRU' and
 OBJECTID = itab2-kdauf.
Regards
Rajaram

Hi Rajaram.
If the KDAUF has to match with the First 10 characters of OBJECTID then do like this..
select OBJECTCLAS
OBJECTID(10)
CHANGENR
TABNAME
TABKEY
FNAME
CHNGIND
VALUE_NEW
VALUE_OLD
from cdpos into corresponding fields of table ipos
for all entries in itab2
where tabname = 'VBAP' and
fname = 'ABGRU' and
OBJECTID(10) = itab2-kdauf.
Reward if helpful

Urgent - Table with Unicode data of 4000 length to be pulled in BI

Dear Gurus,
I have a table which contains the mix type of data - Unicode, text and numeric. The Unicode field is of length 4000 chars max.
Is it possible to pull this in BI 7 ?
I know BI can accommodate 60 chars max in which case I need to create around 67 infoobjects as attributes to the master infoobject if I go with the normal process. This is generally good if the requirement is upto 240-300 chars. But for my case, this obviously will degrade the performance.
Is there any alternative for this ?
This is an important and urgent issue for me and I will assign the points for useful answers.
Regards,
Srinivas

Hi Diego,
Appreciate your timely response. I guess that I left a bit in my mentioning of the doubt.
I already have the PC file(the CSV file of course) with me which contains the data. One of the fields in that contains Unicode characters of 4000 length. Of course, I can upload the other fields of the file into BI, but the problem will arrive with the Unicode field.
For handling the Unicode, I will see the SM59 settings whether Unicode option is set there or not. But to upload the 4000 chars of this Unicode field from the PC file to BI system, I was looking for some better alternative.
Please suggest....
Regards,
Srinivas

Extend length for standard keyfigure

0BALANCE has limited to Char 17 and it is insufficient.
Wondering if it is possible to change the length of standard keyfigure because I did tried going to edit data dic of /BI0/OIBALANCE but it seems like there is nothing I can change ( of course after entering an acess key )

NEVER change standard objects..unless absolutely necessary.
this KF may be used across cubes and ODS..so change will impact all these objects..which may not be the intention..
copy the std infoobject and name it as ZBALANCE and then change copied infoobject and use it.
cheers,
Vishvesh

Urgent!! need help to bounce all the tracks individually with same length.

i have a logic project with 20 (audio/Midi) tracks
and i want to bounce all the tracks individually...
one way i find is to solo every track and bounce the master everytime...
and other way i found was something called export all audio tracks but when i try that all tracks have different length.
i want all the tracks to be of same length and same size..
can anybody help me with that asap....
thanx in advance
boommmm
null

zerodb wrote:
even i want to know how to render multiple tracks at once using the same start point for all.. please someone.. if you're acquainted with this process in logic, do Help! thanx
File>Export>Export All tracks as Audio Files
This will export all tracks from bar 1, beat 1.
I too, am curious why the OP needs his tracks to be the same length. Using the Export feature insures all tracks start from the very beginning (i.e., the same starting point), which is what you want and need when moving the tracks to another DAW.
The length of the track is of no consequence in this example. It plays through the song, until that track is over, like a guitar solo that appears in the middle of a song, but doesn't play past that point.
Unless I'm missing something?

URGENT: vertical lines length in the Mainwindow in smartforms

hI,
In main window 4 vertical lines are there like.. below
item | material no.er | mat.desc | quantity | total price
| | | |
Now the problem is: these vertical lines entered into the next below window.. Now I want to reduce the length of these vertical lines.
Please explain where can I reduce to these vertical lines length.
Thanks and Regards,
Surya

Hi,
in the beginning of the report program:
report <program_name> line-size <give the length say eg:150>.
reward points if useful.
regards,
Vinod Samuel.

Data Type Length --- Urgent

Hi,
Can anyone tell me how bits/bytes is one character... Is there any function module to find out the length of a character / string / any other data types in terms of bits/bytes???
Regards
Jiku

Hi Jiku,
length of a character depends on your system settings, if the system is running on UniCode (2 Byte) or Non UniCode (1 Byte).
Length of a string: http://help.sap.com/saphelp_nw04/helpdata/en/fc/eb33d9358411d1829f0000e829fbfe/frameset.htm
Length of other data type look into DESCRIBE syntax.
Best regards,
ok
Message was edited by:
Oliver Kohl

Length Adjust(Urgent)

Hi All,
First i created a domain with length 15 and created Data Element by using this domain and also i created a Table by using that data element and i saved it activated it it is perfectely worked i aloso enter records in that table but by problem is i change the length 15 to 5 when i activate the domain i found Active log after the length change my status is Partially Active i found this in Dataelement and Table also.
Please telme how to reduce Length.
Thanks in Advance.

Hi,
You will need to adjust the database table.
Got to transaction SE11 and display your table. Choose Utilities -> Database object -> Database utility, here you can activate and adjust the database table.
Regards,
Nick

Want to maintain my inventory status in Length or Weight ( Pls Urgent )

Hi
For example i am procuring
   steels in tonnes,                      steels in 2 tonnes or 2000kg
   liquid chemicals in liters,           liquid chem in 100 liters
   Granites in meters                   Granites in 1000meters
then i am selling this items in different levels like
steels in 200kg, 100kg, 50 kg
Liquid Chem 20lit, 30 , 50
granites 50m,49m,.......
now i want to track my each items with respective their values in inventory not as a quantity. how to do it pls help me.
Edited by: Philip Eller on Jun 13, 2008 10:04 AM
Edited by: Philip Eller on Jun 27, 2008 9:50 AM*
Edited by: Rui Pereira on Jul 8, 2008 5:26 PM

Hi
I am agree ur words, that can be done but i want to track my inventory for these units with thier respective values.
for ex steel i purchased in 1000m as one quantity
i am selling the steels in 50m,100m,250m as my wish.
now in mean time i want to check my inventory for steel in meter how sap b1 will show it. pls clear my problem.

To load a Keyfigure called '0FISCPER'

Hi Experts,
      I am loading a flat file which contains a standard keyfigure called '0FISCPER'...
     The conversion routine used in the keyfigure is PERI7 with input length - 7 and output length - 8.
      The data I enterd in the flatfile for the keyfigure is in the format -> mm.yyyy. Ex: 10.2005.
       But while creating the datasource and previewing the data, it is displayed as 005.01.02 and in DTP the value is displayed as 000000000.
      Please help me to solve the problem. Its very urgent.
With Regards,
Yokesh.

Hello,
Try the value as 010/2007
Regds,
Shashank
Edited by: Shashank Dighe on Feb 21, 2008 9:18 AM

Urgent help needed: how to display a list of records on the screen

Hello,
This is very urgent. Can anyone help me. I have posted this query of mine before also but still no reply came. My whole application is dependent on this problem. Actually I am developing an application for mobile phone using MIDP. I have a record store which contains personal details for users. I am able to add records to the record store. Now I want that these records can be edited. For this I want to display a list of firstname field on the screen (and not console) so that i can select a user to edit its details. I have written the code to read the records and individual fields and display it on the console but i want to display that list on screen. I tried list and array but it s giving some error.
I am giving the code to read the records below. Please tell me how can I display it in a list on the screen.
public void readStream(){
try
byte[] recData=new byte[50];
String varname;
ByteArrayInputStream strmBytes = new ByteArrayInputStream(recData);
DataInputStream strmData=new DataInputStream(strmBytes);
if (rsperdt.getNumRecords() > 0){
ComparatorString comp=new ComparatorString();
int i=1;
RecordEnumeration re=rsperdt.enumerateRecords(null, comp, false);
while(re.hasNextElement()){
rsperdt.getRecord(re.nextRecordId(), recData,0);
System.out.println("Record #" + i );
varname = strmData.readUTF();
System.out.println("Name #"+varname);
System.out.println("---------------------------");
i=i+1;
strmBytes.reset();
comp.compareStringClose();
re.destroy();
strmBytes.close();
catch(Exception e){
System.err.println("read Records class:read");
}

I could not understand ur point "post the code in tags". I am pasting the code below. Please help as my whole application is stuck due to this problem and I have a deadline of 7th oct.
This midlet is getting called from some other midlet.
import javax.microedition.lcdui.*;
import javax.microedition.midlet.*;
import javax.microedition.rms.*;
import java.io.*;
import java.util.*;
public class frmread extends Form implements CommandListener
static final String rec_store="db_per";
private RecordStore rsperdt=null;
private Vector vecname;
private ChoiceGroup chname;
private boolean flagSortByPriority = false, flagShowPriority = true;
private Form fmmain;
private Command cmdBack;
private teledoc midlet;
public frmread(String title, teledoc midlet)
super(title);
this.midlet = midlet;
openRecStore();
this.setCommandListener(this);
 chname = new ChoiceGroup("new", Choice.EXCLUSIVE);
 vecname = new Vector();
 cmdBack = new Command("Back", Command.BACK, 1);
fmmain = new Form("Record Search");
 addCommand(cmdBack);
setCommandListener(this);
readStream();
 rebuildTodoList();
 closeRecStore();
* Process events for this form only
protected void rebuildTodoList()
for(int j=chname.size(); j>0; j--)
 chname.delete(j-1);
 int priority;
 todoitem item;
 String text;
 StringBuffer sb;
 for (int j=0; j<vecname.size(); j++)
 item=(todoitem) vecname.elementAt(j);
 priority = item.getPriority();
 text = item.getText();
 sb = new StringBuffer((flagShowPriority ? (Integer.toString(priority) + "-"): ""));
 sb.append(text);
 chname.append(sb.toString(), null);
public void commandAction(Command c, Displayable s)
if (c == cmdBack){
midlet.displayteledoc();
public void readStream(){
try
byte[] recData=new byte[100];
String varname;
int varname1=0;
 ByteArrayInputStream strmBytes = new ByteArrayInputStream(recData);
 DataInputStream strmData=new DataInputStream(strmBytes);
 if (rsperdt.getNumRecords() > 0){
ComparatorString comp=new ComparatorString();
int i=1;
 int id = 1;
 vecname.removeAllElements();
 RecordEnumeration re=rsperdt.enumerateRecords(null, comp, false);
while(re.hasNextElement()){
 rsperdt.getRecord(re.nextRecordId(), recData,0);
System.out.println("Record #" + i );
varname = strmData.readUTF();
 varname1 = strmData.readInt();
 id = re.nextRecordId();
 System.out.println("Name #"+varname);
 todoitem item = new todoitem(varname1, varname, id);
 vecname.addElement(item);
 System.out.println("---------------------------");
 i=i+1;
strmBytes.reset();
 comp.compareStringClose();
 re.destroy();
strmBytes.close();
catch(Exception e){
System.err.println("read Records class:read");
public void openRecStore(){
try{
rsperdt=RecordStore.openRecordStore("db_per",true);
catch(RecordStoreException e){
db(e.toString());
public void closeRecStore(){
try{
rsperdt.closeRecordStore();
catch(Exception e){
db(e.toString());
public void db(String str){
System.err.println("Msg:" + str);
class ComparatorString implements RecordComparator{
private byte[] recData = new byte[20];
private ByteArrayInputStream strmBytes = null;
private DataInputStream strmDataType = null;
public void compareStringClose(){
try{
if(strmBytes != null)
 strmBytes.close();
if(strmDataType != null)
 strmDataType.close();
 catch (Exception e)
public int compare(byte[] rec1, byte[] rec2)
 String str1, str2;
 try {
 int maxsize = Math.max(rec1.length, rec2.length);
 if (maxsize > recData.length)
 recData = new byte[maxsize];
 strmBytes = new ByteArrayInputStream(rec1);
 strmDataType = new DataInputStream(strmBytes);
 str1=strmDataType.readUTF();
 strmBytes = new ByteArrayInputStream(rec2);
 strmDataType = new DataInputStream(strmBytes);
 str2=strmDataType.readUTF();
 int result=str1.compareTo(str2);
 if (result == 0)
 return RecordComparator.EQUIVALENT;
 else if (result < 0)
 return RecordComparator.PRECEDES;
 else
 return RecordComparator.FOLLOWS;
 catch (Exception e)
 return RecordComparator.EQUIVALENT;

[URGENT HELP NEEDED] Premiere Pro CS6 failed rendering

Hello!
I`ll try to make this quick because I need help asap. I`ve been starting to make YouTube gaming videos 3 weeks ago and my channel is growing up pretty fast. I promised I would make a video everyday but it`s been a full week since I couldn`t upload because I was busy and when I tried to render it failed.
Anyway here`s how it goes.I`ve recorded with fraps some gameplay footage with the resolution of 1360x706. One of my friends reccommanded me Adobe Premiere Pro for editing so I`m using the trial version of CS6. I create a new project and choose a format of 720 25 (cant really remember the exact name). I then import my recorded files and when I place them in the sequence it tells me the resolution is different and asks me if I want to change the sequence settings according to the files. Usually, I ignore it and when I export the Media I just tick the option: "Scale to Fill" and that usually works just fine, quality HD on YT...
But this week it has driven me crazy, I really don`t want to explain how much stress and dissapointment this has caused to me because I think I`ll end up raging...I`ll just tell you I`ve been trying for a couple of days more than 7 time to render the project(each time it takes about an hour and a bit more, so let`s just call it 7 hours wasted). The problem actually is that when I check the output file after exporting the media, the file size is ONLY 24 bytes!!! Other times the file size gets to like half of the one that should be or less, but mainly the render even so takes up a normal length of time of processing but in the end the file is only 24 bytes..Thing is I don`t encounter any error whatsoever...
I really need some urgent help!
Thanks!

1st, some FRAPS information
These are for Premiere Elements, but may help with PPro
Fraps & Elements http://forums.adobe.com/thread/871095
-and more Elements http://forums.adobe.com/thread/943772
-and yet more Elements http://forums.adobe.com/thread/967201
2nd, it is REALLY better to have your project sequence match your video
Please NOTE that the PPro CS6 screen may look a bit different (I use CS5)
For CS5 and later, the easy way to insure that your video and your project match
See 2nd post for picture of NEW ITEM process http://forums.adobe.com/thread/872666
-and a FAQ on sequence setting http://forums.adobe.com/message/3804341

URGENT HELP REQUIRED!

I am having problems implementing a username validaion bean for my login system. Every time I click my login icon on my main JSP page the login JSP page does not appear except one of the error JSP pages.
How can I correct this problem?
Does the code below look correct?
Below is the codes for the Username Validation Bean :
LOGIN.JSP
<%@ page import="java.io.*"%>
<%@ page import="java.util.*"%>
<%@ page import="java.sql.*"%>
<%@ page import="com.mysql.jdbc.*"%>
<%@ page errorPage="badLogin.jsp"%>
<%@ page import="gcd.UserNameValidationBean"%>
<%
Class.forName("com.mysql.jdbc.Driver");
java.sql.Connection connection=java.sql.DriverManager.getConnection("jdbc:mysql://localhost/gcdBB_db");
java.sql.Statement statement = connection.createStatement();
Enumeration parameters = request.getParameterNames();
if(parameters.hasMoreElements())
String usernameValue = request.getParameter("username");
String passwordValue = request.getParameter("password");
statement.executeUpdate("INSERT INTO users (username,password) VALUES ('"+usernameValue+"','"+passwordValue+"')");
%>
GOODLOGIN.JSP
<%@ page errorPage="badLogin.jsp"%>
<%@ page import="gcd.UserNameValidationBean"%>
<% UserNameValidationBean validationBean = new UserNameValidationBean();
if(request.getParameter("username")!=null)
validationBean.validateUserNameBean(request.getParameter("username"));
%>
<%=request.getParameter("username")%>
USERNAMEVALIDATIONBEAN.JAVA
package gcd;
public class UserNameValidationBean
public UserNameValidationBean(){}
public boolean validateUserName(String userName) throws InvalidUserNameException
if(userName.length() < 32)
throw new InvalidUserNameException("User Name Invalid: " + userName);
return true;
INVALIDUSERNAMEEXCEPTION.JAVA
package gcd;
public class InvalidUserNameException extends Exception
public InvalidUserNameException(String message)
super(message);
I need urgent help to get this working!

Here is code for badLogin.jsp and badLoginWithExceptonObject:
BADLOGIN.JSP
<HTML><HEAD><TITLE>Login Failure</TITLE></HEAD>
<BODY bgcolor="#FF9900">
<H1></H1>
Sorry but you either entered an incorrect username
or password 
Try Again
</BODY></HTML>
BADLOGINWITHEXCEPTIONOBJECT.JSP
<HTML><HEAD><TITLE>Check User Login Against Parameters</TITLE></HEAD>
<BODY bgcolor="#FF9900">
<%@ page isErrorPage = "true"%>
Error = <%= exception.getMessage()%> <% PrintWriter writer = new PrintWriter(out); %>
Stack = <% exception.printStackTrace(writer); %>
Try Again
</BODY></HTML>

Urgent help required - linked subreport keeps asking for parameter value

Greetings,
I have developed a report in the Crystal Reports bundled with Visual Studio 2005. The data is obtained from a stored procedure. One of the fields in the result set is named "Id".
I have embedded a subreport in the details row of the main report. The subreport also gets its information from a stored procedure. This stored procedure has one parameter named "OpportunityId". This field is linked to the field named "Id" above. the subreport has been set to supress blank subreports.
In the development environment and running the executable of the application on the development machine the report works perfectly. The subreport displays as it should and all is well.
When I deploy the report onto user machines where they have the crystal runtime installed, the report keeps asking for a parameter value for the subreport.
I cannot get this to stop happening.
This report is urgently required. PLEASE could someone help me out here.
I am at my wits end.
I have attached a zipe file containing the following:
- the two stored procedure
- the rpt file
- a sample report
- a screen showing the report having just been generated
Thanks in advance,
Robert Lancaster

Hi Robert,I see your report template and stored procedures. All seems to be ok. The most important is to assign the report parameters for all linked subreports (only one in your case). Try this (in C#, in VB.NET the code are very similary): ReportDocument report = new ReportDocument(@"TopFortyReport.rpt");AssignParameters(report, paramCollection);// and now assign parameters to all linked subreports foreach( CrystalDecisions.CrystalReports.Engine.Section section in report.ReportDefinition.Sections){ foreach (CrystalDecisions.CrystalReports.Engine.ReportObject reportObject in section.ReportObjects) { if (reportObject.Kind == ReportObjectKind.SubreportObject) { SubreportObject subReport = (SubreportObject)reportObject; ReportDocument subDocument = subReport.OpenSubreport(subReport.SubreportName); AssignParameters(subDocument, paramsCollection); }} void AssignParameters(ReportDocument report, object[] paramsCollection){ int nParams = paramsCollection.Length; for (int iParamIndex = 0; iParamIndex < nParams; iParamIndex++) { if (report.DataDefinition.ParameterFields[iParamIndex].IsLinked()) continue; report.SetParameterValue(iParamIndex, paramsCollection[iParamIndex]); }}

Urgent Help Required for Connect Four Game

Hi all,
I am a student and I have a project due 20th of this month, I mean May 20, 2007 after 8 days. The project is about creating a Connect Four Game. I have found some code examples on the internet which helped me little bit. But there are lot of problems I am facing developing the whole game. I have drawn the Board and the two players can play. The players numbers can fill the board, but I have problem implementing the winner for the game. I need to implement the hasWon() method for Horizontal win, Vertical win and Diagonal win. I also found some code examples on the net but I was unable to make it working. I have 5 classes and one interface which I m implementing. The main problem is how to implement the hasWon() method in the PlayGame class below with Horizontal, vertical and diagonal moves.
Sorry there is so much code.
This the interface I must implement, but now I am only implementing the int move() of this interface. I will implement the rest later after solving the winner problem with your help.
Interface code..............
interface Player {
void init (Boolean color);
String name ();
int move ();
void inform (int i);
Player1 class......................
import java.util.*;
import java.io.*;
import javax.swing.*;
public class Player1 implements Player
public Player1()
public int move()
Scanner scan = new Scanner(System.in);
// BufferedReader stdin = new BufferedReader (new InputStreamReader(System.in));
int player1;
System.out.println ("What is your Number, player 1?");
player1 = scan.nextInt();
System.out.println ("Hey number"+player1+" are you prepared to CONNECT FOUR");
System.out.println();
return player1;
//Player.move();
//return player1;
}//end move method
public void init (Boolean color)
public void inform (int i)
public String name()
return "Koonda";
}//end player1 class
Player2 class...........................
import java.util.*;
import java.io.*;
import javax.swing.*;
public class Player2 implements Player
public int move()
//int cup0,cup1,cup2,cup3,cup4,cup5,cup6;
// cup0=5;cup1=5;cup2=5;cup3=5;cup4=5;cup5=5;cup6=5;
//int num1, num2;
Scanner scan = new Scanner(System.in);
// BufferedReader stdin = new BufferedReader (new InputStreamReader(System.in));
int player2;
System.out.println ("What is your Number, player 2?");
player2 = scan.nextInt();
System.out.println ("Hey "+player2+" are you prepared to CONNECT FOUR");
System.out.println();
//return player1;
return player2;
}//end move method
public void init (Boolean color)
public void inform (int i)
public String name()
return "malook";
}//end player1 class
PlayGame class which contains all the functionality.........................................................
import java.util.*;
import java.io.*;
import javax.swing.*;
public class PlayGame
//Player player1;
//Player player2;
int [][]ConnectFourArray;
boolean status;
int winner;
 int player1;
 int player2;
 public PlayGame()
 //this.player1 = player1;
 //this.player2 = player2;
 public void StartGame()
 try{
 // int X = 0, Y = 0;
 //int value;
 int cup0,cup1,cup2,cup3,cup4,cup5,cup6;
cup0=5;cup1=5;cup2=5;cup3=5;cup4=5;cup5=5;cup6=5;
 int[][] ConnectFourArray = new int[6][7];
 int num1, num2;
 for(int limit=21;limit!=0;limit--)
BufferedReader selecter = new BufferedReader (new InputStreamReader(System.in));
String column1;
System.out.println();
for ( int row=0; row < ConnectFourArray.length; row++ ){
System.out.print("Row " + row + ": ");
for ( int col=0; col < ConnectFourArray[row].length; col++ )
System.out.print( ConnectFourArray[row][col] + " ");
System.out.println();
System.out.println();
System.out.println ("Please Select a column of 0 through 6 ");
column1 = selecter.readLine();
num1= Integer.parseInt(column1);
System.out.println();
if (num1==0){
ConnectFourArray[cup0][0]=1;
cup0=cup0-1;
else if (num1==1){
ConnectFourArray[cup1][1]=1;
cup1=cup1-1;
else if (num1==2){
ConnectFourArray[cup2][2]=1;
cup2=cup2-1;
else if (num1==3){
ConnectFourArray[cup3][3]=1;
cup3=cup3-1;
else if (num1==4){
ConnectFourArray[cup4][4]=1;
cup4=cup4-1;
else if (num1==5){
ConnectFourArray[cup5][5]=1;
cup5=cup5-1;
else if (num1==6){
ConnectFourArray[cup6][6]=1;
cup6=cup6-1;
System.out.println();
BufferedReader selecter2 = new BufferedReader (new InputStreamReader(System.in));
String column2;
System.out.println();
for ( int row=0; row < ConnectFourArray.length; row++ ){
System.out.print("Row " + row + ": ");
for ( int col=0; col < ConnectFourArray[row].length; col++ )
System.out.print( ConnectFourArray[row][col] + " ");
System.out.println();
System.out.println();
System.out.println ("Please Select a column of 0 through 6 ");
column1 = selecter.readLine();
num1= Integer.parseInt(column1);
System.out.println();
if (num1==0){
ConnectFourArray[cup0][0]=2;
cup0=cup0-1;
else if (num1==1){
ConnectFourArray[cup1][1]=2;
cup1=cup1-1;
else if (num1==2){
ConnectFourArray[cup2][2]=2;
cup2=cup2-1;
else if (num1==3){
ConnectFourArray[cup3][3]=2;
cup3=cup3-1;
else if (num1==4){
ConnectFourArray[cup4][4]=2;
cup4=cup4-1;
else if (num1==5){
ConnectFourArray[cup5][5]=2;
cup5=cup5-1;
else if (num1==6){
ConnectFourArray[cup6][6]=2;
cup6=cup6-1;
System.out.println();
System.out.println();
catch (Exception E){
System.out.println("Error with input");
System.out.println("Would you like to play again");
try{
String value;
BufferedReader reader = new BufferedReader (new InputStreamReader(System.in));
// Scanner scan = new Scanner(System.in);
System.out.println("Enter yes to play or no to quit");
// value = scan.nextLine();
// String value2;
value = reader.readLine();
//value2 = reader.readLine();
if (value.equals("yes"))
System.out.println("Start again");
StartGame(); // calling the StartGame method to play a game once more
else if (value.equals("no"))
System.out.println("No more games to play");
// System.exit(0);
else
System.exit(0);
System.out.println();
catch (Exception e){
System.out.println("Error with input");
finally
System.out.println(" playing done");
//StartGame();
//check for horizontal win
public int hasWon()
int status = 0;
for (int row=0; row<6; row++)
for (int col=0; col<4; col++)
if (ConnectFourArray[col][row] != 0 &&
ConnectFourArray[col][row] == ConnectFourArray[col+1][row] &&
ConnectFourArray[col][row] == ConnectFourArray[col+2][row] &&
ConnectFourArray[col][row] == ConnectFourArray[col+3][row])
//status = true;//int winner;
if(status == player1)
System.out.println("Player 1 is the winner");
else if(status == player2)
System.out.println("Player 2 is the winner" );
}//end inner for loop
}// end outer for loop
} // end method Winner
return status;
}//end class
ClassConnectFour which designs the board........................
import java.util.*;
import java.io.*;
import javax.swing.*;
public class ClassConnectFour
 //Player player1;
 //Player player2;
 public ClassConnectFour()
 //this.player1 = player1;
public void DrawBoard()
int[][] ConnectFourArray = new int[6][7] ;
for ( int row=0; row < ConnectFourArray.length; row++ ){
System.out.print("Row " + row + ": ");
for ( int col=0; col < ConnectFourArray[row].length; col++ )
System.out.print( ConnectFourArray[row][col] + " ");
System.out.println();
System.out.println();
}//end class
TestConnetFour class which uses most of the above class..................
import java.util.*;
import java.io.*;
import javax.swing.*;
public class TestConnectFour
public static void main(String[] args)
ClassConnectFour cf = new ClassConnectFour();
cf.DrawBoard();
Player1 player1 = new Player1();
Player2 player2 = new Player2();
player1.move();
player2.move();
System.out.println("Number 1 belongs to player " + player1.name());
System.out.println("Number 2 belongs to player " + player2.name());
PlayGame pg = new PlayGame();
pg.StartGame();
pg.hasWon();
//pg.Play();
//System.out.println(player.name());
//System.out.println(player2.name());
}// end main
}//end class
I am sorry for all this junk code but I only understand it this way. Your urgent help is required. Looking forward to your reply.
Thanks in advance.
Koonda
//

Hi,
Thanks for your help but I really don't understand the table lookup algorithm. Could you please send me some code to implement that.
I will send you the formatted code as well
Thanks for your help.
looking forward to your reply.
Koonda
Hi all,
I am a student and I have a project due 20th of this month, I mean May 20, 2007 after 8 days. The project is about creating a Connect Four Game. I have found some code examples on the internet which helped me little bit. But there are lot of problems I am facing developing the whole game. I have drawn the Board and the two players can play. The players numbers can fill the board, but I have problem implementing the winner for the game. I need to implement the hasWon() method for Horizontal win, Vertical win and Diagonal win. I also found some code examples on the net but I was unable to make it working. I have 5 classes and one interface which I m implementing. The main problem is how to implement the hasWon() method in the PlayGame class below with Horizontal, vertical and diagonal moves.
Sorry there is so much code.
This the interface I must implement, but now I am only implementing the int move() of this interface. I will implement the rest later after solving the winner problem with your help.
Interface code..............
interface Player {
void init (Boolean color);
String name ();
int move ();
void inform (int i);
Player1 class......................
import java.util.*;
import java.io.*;
import javax.swing.*;
public class Player1 implements Player
public Player1()
public int move()
Scanner scan = new Scanner(System.in);
// BufferedReader stdin = new BufferedReader (new InputStreamReader(System.in));
int player1;
System.out.println ("What is your Number, player 1?");
player1 = scan.nextInt();
System.out.println ("Hey number"+player1+" are you prepared to CONNECT FOUR");
System.out.println();
return player1;
//Player.move();
//return player1;
}//end move method
public void init (Boolean color)
public void inform (int i)
public String name()
return "Koonda";
}//end player1 class
Player2 class...........................
import java.util.*;
import java.io.*;
import javax.swing.*;
public class Player2 implements Player
public int move()
//int cup0,cup1,cup2,cup3,cup4,cup5,cup6;
// cup0=5;cup1=5;cup2=5;cup3=5;cup4=5;cup5=5;cup6=5;
//int num1, num2;
Scanner scan = new Scanner(System.in);
// BufferedReader stdin = new BufferedReader (new InputStreamReader(System.in));
int player2;
System.out.println ("What is your Number, player 2?");
player2 = scan.nextInt();
System.out.println ("Hey "+player2+" are you prepared to CONNECT FOUR");
System.out.println();
//return player1;
return player2;
}//end move method
public void init (Boolean color)
public void inform (int i)
public String name()
return "malook";
}//end player1 class
PlayGame class which contains all the functionality.........................................................
import java.util.*;
import java.io.*;
import javax.swing.*;
public class PlayGame
//Player player1;
//Player player2;
int [][]ConnectFourArray;
boolean status;
int winner;
int player1;
int player2;
public PlayGame()
//this.player1 = player1;
//this.player2 = player2;
public void StartGame()
try{
// int X = 0, Y = 0;
//int value;
int cup0,cup1,cup2,cup3,cup4,cup5,cup6;
cup0=5;cup1=5;cup2=5;cup3=5;cup4=5;cup5=5;cup6=5;
int[][] ConnectFourArray = new int[6][7];
int num1, num2;
for(int limit=21;limit!=0;limit--)
BufferedReader selecter = new BufferedReader (new InputStreamReader(System.in));
String column1;
System.out.println();
for ( int row=0; row < ConnectFourArray.length; row++ ){
System.out.print("Row " + row + ": ");
for ( int col=0; col < ConnectFourArray[row].length; col++ )
System.out.print( ConnectFourArray[row][col] + " ");
System.out.println();
System.out.println();
System.out.println ("Please Select a column of 0 through 6 ");
column1 = selecter.readLine();
num1= Integer.parseInt(column1);
System.out.println();
if (num1==0){
ConnectFourArray[cup0][0]=1;
cup0=cup0-1;
else if (num1==1){
ConnectFourArray[cup1][1]=1;
cup1=cup1-1;
else if (num1==2){
ConnectFourArray[cup2][2]=1;
cup2=cup2-1;
else if (num1==3){
ConnectFourArray[cup3][3]=1;
cup3=cup3-1;
else if (num1==4){
ConnectFourArray[cup4][4]=1;
cup4=cup4-1;
else if (num1==5){
ConnectFourArray[cup5][5]=1;
cup5=cup5-1;
else if (num1==6){
ConnectFourArray[cup6][6]=1;
cup6=cup6-1;
System.out.println();
BufferedReader selecter2 = new BufferedReader (new InputStreamReader(System.in));
String column2;
System.out.println();
for ( int row=0; row < ConnectFourArray.length; row++ ){
System.out.print("Row " + row + ": ");
for ( int col=0; col < ConnectFourArray[row].length; col++ )
System.out.print( ConnectFourArray[row][col] + " ");
System.out.println();
System.out.println();
System.out.println ("Please Select a column of 0 through 6 ");
column1 = selecter.readLine();
num1= Integer.parseInt(column1);
System.out.println();
if (num1==0){
ConnectFourArray[cup0][0]=2;
cup0=cup0-1;
else if (num1==1){
ConnectFourArray[cup1][1]=2;
cup1=cup1-1;
else if (num1==2){
ConnectFourArray[cup2][2]=2;
cup2=cup2-1;
else if (num1==3){
ConnectFourArray[cup3][3]=2;
cup3=cup3-1;
else if (num1==4){
ConnectFourArray[cup4][4]=2;
cup4=cup4-1;
else if (num1==5){
ConnectFourArray[cup5][5]=2;
cup5=cup5-1;
else if (num1==6){
ConnectFourArray[cup6][6]=2;
cup6=cup6-1;
System.out.println();
System.out.println();
catch (Exception E){
System.out.println("Error with input");
System.out.println("Would you like to play again");
try{
String value;
BufferedReader reader = new BufferedReader (new InputStreamReader(System.in));
// Scanner scan = new Scanner(System.in);
System.out.println("Enter yes to play or no to quit");
// value = scan.nextLine();
// String value2;
value = reader.readLine();
//value2 = reader.readLine();
if (value.equals("yes"))
System.out.println("Start again");
StartGame(); // calling the StartGame method to play a game once more
else if (value.equals("no"))
System.out.println("No more games to play");
// System.exit(0);
else
System.exit(0);
System.out.println();
catch (Exception e){
System.out.println("Error with input");
finally
System.out.println(" playing done");
//StartGame();
//check for horizontal win
public int hasWon()
int status = 0;
for (int row=0; row<6; row++)
for (int col=0; col<4; col++)
if (ConnectFourArray[col][row] != 0 &&
ConnectFourArray[col][row] == ConnectFourArray[col+1][row] &&
ConnectFourArray[col][row] == ConnectFourArray[col+2][row] &&
ConnectFourArray[col][row] == ConnectFourArray[col+3][row])
//status = true;//int winner;
if(status == player1)
System.out.println("Player 1 is the winner");
else if(status == player2)
System.out.println("Player 2 is the winner" );
}//end inner for loop
}// end outer for loop
} // end method Winner
return status;
}//end class
ClassConnectFour which designs the board........................
import java.util.*;
import java.io.*;
import javax.swing.*;
public class ClassConnectFour
//Player player1;
//Player player2;
public ClassConnectFour()
//this.player1 = player1;
public void DrawBoard()
int[][] ConnectFourArray = new int[6][7] ;
for ( int row=0; row < ConnectFourArray.length; row++ ){
System.out.print("Row " + row + ": ");
for ( int col=0; col < ConnectFourArray[row].length; col++ )
System.out.print( ConnectFourArray[row][col] + " ");
System.out.println();
System.out.println();
}//end class
TestConnetFour class which uses most of the above class..................
import java.util.*;
import java.io.*;
import javax.swing.*;
public class TestConnectFour
public static void main(String[] args)
ClassConnectFour cf = new ClassConnectFour();
cf.DrawBoard();
Player1 player1 = new Player1();
Player2 player2 = new Player2();
player1.move();
player2.move();
System.out.println("Number 1 belongs to player " + player1.name());
System.out.println("Number 2 belongs to player " + player2.name());
PlayGame pg = new PlayGame();
pg.StartGame();
pg.hasWon();
//pg.Play();
//System.out.println(player.name());
//System.out.println(player2.name());
}// end main
}//end classI am sorry for all this junk code but I only understand it this way. Your urgent help is required. Looking forward to your reply.
Thanks in advance.
Koonda

Urgent: Keyfigure length

Similar Messages

Maybe you are looking for