URGENT Lenovo g550 webcam does not show up in Device Manager and all drivers cannot be installed

Hello everyone. So my lenovo g550 webcam stopped working after I did a clean install of windows 7 home. When I go under device manager I do not see any unknow devices. When I also go to show hidden devices it is not there. Could anyone give me information about how to fix this and if the cable to the webcam might be broken. If so, is there a way I could convert the webcam's pin outs to usb to test it. I have split an old usb cable into four colored spots. Not sure if i want to test it though. That would be my last resort. If needbe, can you tell me the pin outs for the webcam. It has five connectors. The reason I know this is usb is because my older installation on windows 7 detected it and said that the usb could be faster. Thanks.

Sorry about that. I've only been a member for a few days. I will remove the post with all Capps. Have a nice day!

Similar Messages

W520 Smart Card reader does not show up in Device Manager

W520 Smart Card reader does not show up in Device Manager.
It was working before and now nothing. Nothing happens when SD card plugges in.
Could my smart card reader stop working or is this a configuration issue?
Any thoughts?
thanks
Ian

Hi Ian,
Welcome to the community, and thanks for the post.
The issue is related with software, to resolve this you need to re-install the card reader driver from the below mentioned web link.
http://support.lenovo.com/en_SG/downloads/default.page?
After that check if the issue get resolved.
Regards,
Sameer
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution".! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Sometimes Firefox will not open, telling me, it is already running. It does not show in the task manager and the only solution is to reboot.

Firefox is running. I close the program. I try to reopen it. I get an error message: Firefox is already running. It does not show in the task manager, nor anywhere else. I can not close the old version, nor start a new one. I have to reboot.

Did you look in the Processes tab in the Task Manager?
See also "Hang at exit":
* http://kb.mozillazine.org/Firefox_hangs
* [[Firefox hangs]]

Graphics Card Does Not Show Up In Device Manager (Re: Installing AMD Video Drivers - Windows 8.1 (Step-By-Step Tutorial)

This tutorial is a step-by-step tutorial on how to "fix" issues of a new graphics card not appearing in Windows 8.1 Pro, or not appearing (as a device) in Device Manager, or it's not being detected by Windows 8.1.
This is the "second part" of a Step-by-Step Tutorial on how to install AMD Radeon graphics card drivers in Windows 8.1 Pro.
GRAPHICS CARD IS NOT DETECTED AND DOES NOT SHOW UP IN WINDOWS 8.1 DEVICE MANAGER
This problem can appear if the video card is not installed properly in the PCI slot and as a result the card is not detected in device manager. Check the physical connections again, reinsert the card properly in the PCI slot, check the connections (including the power cables going to the video card, and ensure that the fan on the graphics card is spinning and the card does have power and is properly seated/inserted) and then install the drivers from the manufacturer’s website.
If the video card is in fact installed properly, but the problem of the video card not being discovered/found by the operating system persists, then try these following methods below to check if this solves the problem.
Method 1:
First, I would suggest you to run the following Microsoft Fixit to get the problem automatically detected and fixed. This Microsoft "fixit" App checks if the device is currently disabled or turned off or the driver is not installed.
Hardware devices are not working or are not detected in Windows.
http://support.microsoft.com/mats/hardware_device_problems/en-us
Method 2:
Sometimes, some devices in device manager are hidden due to corrupt or missing drivers.
Follow the steps below to show hidden devices in the device manager and troubleshoot accordingly.
Press the Windows key + X
Select Command Prompt (Admin)
Type set devmgr_show_nonpresent_devices=1 and hit enter
Type Start DEVMGMT.MSC and hit enter.
Once in Device Manager hit the View menu and select show hidden devices.
From here, remove each instance of the AMD or Nvidia card you see as well as each unknown device. Exit Device Manager and reinstall the latest drivers you can find for your graphics card.
After you install the drivers, reboot and see if you get any different results.
If the above solved your problems and the Graphics Card is now working and is now being properly detected/displayed in Windows Device Manager:
If your graphics card is now being detected by Windows 8.1 in Device Manager, but has a "yellow exclamation" mark (or video drivers are not found or not properly installed or the device is disabled) then install the latest graphics card drivers and proceed with this Step-by-Step Tutorial on how to install AMD Radeon graphics card drivers in Windows 8.1 Pro.
Method 3:
If methods suggested above does not help, I would recommend you to contact Apple/AMD/NVIDIA to get the latest chipset, BIOS, graphics card drivers installed properly.

This tutorial is a step-by-step tutorial on how to "fix" issues of a new graphics card not appearing in Windows 8.1 Pro, or not appearing (as a device) in Device Manager, or it's not being detected by Windows 8.1.
This is the "second part" of a Step-by-Step Tutorial on how to install AMD Radeon graphics card drivers in Windows 8.1 Pro.
GRAPHICS CARD IS NOT DETECTED AND DOES NOT SHOW UP IN WINDOWS 8.1 DEVICE MANAGER
This problem can appear if the video card is not installed properly in the PCI slot and as a result the card is not detected in device manager. Check the physical connections again, reinsert the card properly in the PCI slot, check the connections (including the power cables going to the video card, and ensure that the fan on the graphics card is spinning and the card does have power and is properly seated/inserted) and then install the drivers from the manufacturer’s website.
If the video card is in fact installed properly, but the problem of the video card not being discovered/found by the operating system persists, then try these following methods below to check if this solves the problem.
Method 1:
First, I would suggest you to run the following Microsoft Fixit to get the problem automatically detected and fixed. This Microsoft "fixit" App checks if the device is currently disabled or turned off or the driver is not installed.
Hardware devices are not working or are not detected in Windows.
http://support.microsoft.com/mats/hardware_device_problems/en-us
Method 2:
Sometimes, some devices in device manager are hidden due to corrupt or missing drivers.
Follow the steps below to show hidden devices in the device manager and troubleshoot accordingly.
Press the Windows key + X
Select Command Prompt (Admin)
Type set devmgr_show_nonpresent_devices=1 and hit enter
Type Start DEVMGMT.MSC and hit enter.
Once in Device Manager hit the View menu and select show hidden devices.
From here, remove each instance of the AMD or Nvidia card you see as well as each unknown device. Exit Device Manager and reinstall the latest drivers you can find for your graphics card.
After you install the drivers, reboot and see if you get any different results.
If the above solved your problems and the Graphics Card is now working and is now being properly detected/displayed in Windows Device Manager:
If your graphics card is now being detected by Windows 8.1 in Device Manager, but has a "yellow exclamation" mark (or video drivers are not found or not properly installed or the device is disabled) then install the latest graphics card drivers and proceed with this Step-by-Step Tutorial on how to install AMD Radeon graphics card drivers in Windows 8.1 Pro.
Method 3:
If methods suggested above does not help, I would recommend you to contact Apple/AMD/NVIDIA to get the latest chipset, BIOS, graphics card drivers installed properly.

My Laptop Pavilion 9700 will not recognize DVD/CD drive. Does not show up in Device Manager

My laptop Pavilion 9700 will not recognize the DVD/CD drive:
The drive does not show up in the Device Manager’s list: The disk spins and the light is on: Use a
paper clip to open the door; I updated
to Sevice Pak 2 recently, but I am not sure if this has anything to cause this
problem: Please Help, anyone!
Thanks

Hi,
Follow the procedure on the link below to create a bootable Ubuntu CD and follow the steps in Part 3 to 'Try it' to see if this OS will run from the CD without the need to install on your HDD. This will show whether the problem is with Windows or a Hardware problem with the optical drive.
http://www.ubuntu.com/desktop/get-ubuntu/download
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Sound and audio does not show up in device manager hp pavillion dv6500

No audio output device installed. Sound and audio not listed under device manager hp pavillion dv6500 system bios f.2a-02/22/2008

Hi @Cynthia0
I understand that you have no audio device showing up in device manager. I am happy to help you with this.
Please post the full product number for your notebook. See the following, if you need help with that information.
How Do I Find My Model Number or Product Number?
Once I have that, I can find the proper driver and support page for you.
For now check through this page: Resolving No Sound or Audio Problems (Windows Vista)
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

T61p - IEEE 1394 (Firewire) port does not show up in device manager in Windows 7 x64

I have a T61p. On the front, in the left corner, right next to the wireless on/off switch, is a IEEE 1394 (Firewire) port. However, if I plug anything into it, it's not recognized by Windows, and if I go into the device manager in Windows, there is no IEEE 1394 host manager or ports or anything listed there.
I have rebooted and gone into the BIOS, and I don't see anything in there about 1394 either. Is the port there, but the hardwire inside is missing? Do I need to enable it somehow?

Let me clarify that. I have something in the device manager called "SD Host Adapters", and under that "SDA Standard Compliant SD Host Controller". That thing has a Microsoft driver.
However, under "IDE ATA/ATAPI contollers", I do see "Ricoh Memory Stick Contoller", "Ricoh SD/MMC Host Contoller", and "Ricoh xD-Picture Card Contoller".
I also have "PCMCIA adapters" that has "Ricoh R/RL/5C476(II) or Compatible CardBus Contoller".
So, it would seem I have the right drivers for the card reader, I'm just missing anything for the IEEE 1394 contoller...

Webcam does not show up as a device

I have a Pavilion dv7-6b55dx Entertainment PC.The integrated webcam is a HP TrueVision HD webcam. The webcam does not show up in the device managerI have downloaded Cyberlink YouCam 5 and it also notes that no webcam can be detected.The settings button is grayed out and cannot be clicked on.I have also downloaded the driver for the webcam which has done nothing. (http://www.driverscape.com/download/hp-truevision-hd) I would greatly appreciate your help in resolving this issue. Thank you.

Hi ,
Thank you for visiting the HP Support Forums and Welcome. It is a great site for information and questions. I have looked into your issue about your Here is a link to troubleshoot the WebCam. This gives you a section on Device Manager does not show the WebCam. You might have to uninstall the MediaSmart software to use the Cyberlink. Hope this helps. Thanks.

I have a new movie rental in my iTunes account on my Mac Book Pro but does not show up on Apple TV. All my other purchased movies are there OK. Any suggestions?

I have a new movie rental in my iTunes account on my Mac Book Pro but does not show up on Apple TV. All my other purchased movies are in there OK. Any suggestions?

It won't show up on your Apple TV until it is fully downloaded into iTunes on your computer, have you done this.

Desktop Software 6.0 (PC) does not show OS 6 system software and core applications

I have installed DM 600_b047 on my PC (running WinXP w/ SP3). I have also installed both OS 6.0.0_rel862 and 5.0.0_rel1385 on the same PC. When I connect my Bold 9000 to the PC, DM shows everything that is installed on the device. However, when disconnect the Bold and I connect my Torch 9800, DM shows only the third-party apps installed on the device. DM does not show the System Software, Core Applications, Phone, etc. that are installed on the Torch.
On another PC (also WinXP w/ SP3), I have installed the same DM and OS software. DM on the latter PC shows all System Software, Core Apps, 3rd-party apps, etc. of both the Bold and Torch.
I would appreciate any suggestions how to get my other PC to show all BB software installed on the Torch. I have already uninstalled and reinstalled the DM and OS software on the one PC. It did not resolve my issue.
Thank you.

Here's how I resolved my issue:
1. On the DM's Applications page, click the "Import files" button.
2. Drill down to the folder containing the .alx files of the BB OS. In my case, that would be "C:\Program Files\Common Files\Research In Motion\Shared\Loader Files\9800M_v6.0.0.284_P6.4.0.120"
3. Select the alx files shown.in the files window..
4. Click the "Open" button of the dialog box.
5. Wait for DM to finish processing the selected files.
Voila! Now I see all the apps.
Maybe RIM's software and/or system engineers can explain how the DM software got into the condition where it apparently had not selected the .alx files.

My IPhone does not show up under Devices in I Tunes when I plug it into my computer. "Devices" no longer appears on the menu at all down the side of the page.

My IPhone does not show up under Devices in I Tunes when I plug it into my computer. "Devices" no longer appears on the menu at all down the side of the page.

Hope this helps:
http://www.apple.com/support/iphone/assistant/itunes/

Does anybody know why my ipod touch 3rd generations screen does not show anything? The screen is all black, when I try to synchronise my ipod to my library it comes up with a message saying "iTunes could not back up the ipod because a session could not be

Does anybody know why my ipod touch 3rd generations screen does not show anything? The screen is all black constantly. When I try to synchronise my ipod with my iTunes library it comes up with a message saying " iTunes could not back up the ipod because a session could not be started with the ipod. Please help and reply if you know an answer!!!

Try this previous discusssion:
https://discussions.apple.com/message/12518406#12518406

I have a macbookpro. when I connect any camera to the mac it does not show as a device. How do I load my pictures to either iPhoto or Aperture? It worked before but just stopped working. Any suggestions?

I have a macbookpro. I use Aperture and Iphoto. When I connect any camera to the Mac it does not open it as a device in Iphoto, Aperture or in Finder. It use to work but just stopped. Any sugestions?

Here is the full story. It may be long so please bear with me. I take a lot of pictures and movies. Since I have over 30,000 pictures I decided to place the Iphoto library on an external drive to save space on my internal drive since ot was getting very full. After I did that it worked fine for a while. Then one day I could not open the Iphoto library. Since I was overseas at the time I brought it to the IStudio ( not an Istore) overseas. They said to rebuild the library and they would do that for me. It took all day since I had so many pictures. When they called me and told me it was ready, I went to pick it up. They started to show me the new library. It crashed again. Not knowing how to fix this at the ISudio, they installed Aperture and imported the Iphoto library. This worked fine for a short time.When back in the states, it crashed again just like Iphoto. I took it to the IStore. They did not know why the overseas Istudio did what they did what they did and rebuilt my aperture library. Again it worked fine. Now that I am overseas again. It crashed again. However, I concluded that the reason for these crashes is becuase I have the file on an external drive that derives its power from the Mac and not by itself. When I use it and stop for a while the MAC will go to sleep and this cuases the external drive to shut down. This then causes the library to have inconsistancies. Therefore, when it happened this time I tried to repair the library and after 36 hours it would close down Aperture. Therefore I decided to rebuild the library. That did not work either. So I tried opening the Aperture library with Iphoto. That seemed like it was going to work but after importing half of the 30,000 plus pictures. I photo shut down. I then made a new aperture libary and erged the old library with it. This worked. I now have an aperture library that works. However, when I plug my camera into the MAC nothing happens. The camera does not show up in devices in either Aperture, I photo nor in Finder. The USB port and cord I use works fine becuase I can read my external hard drives fine. I checked as SIG suggested in this thread and everything is set to open aperture when the camera is connected.
I have the newest OS version 10. 7. 2 and the computer frequently updates all my programs. I have not installed any ne software lately. The problem happens both if I am on battery or plugged in. Just before I came overseas the IStore replaced the Battery. I can go back to the IStudio here overseas but the last time I was there and told them about the problem ( I did not have my computer with me) they did not impress me with their wisdom. I will be back in that city in a month and can go there if need be. Thanks for all the help so far. God bless.

Favicon does not show up on Google chrome and firefox with new muse release. Opera showing favicon ok.

Favicon does not show up on Google chrome and firefox with new muse release when exporting HTML or publishing with FTP. Opera showing favicon ok. Previews Muse release was working fine.
this website was created with one update back BK Foto
this one page was updated with latest updated Muse and after publishing with FTP through Muse favicon does not show up Paslaugų Era | Foto Video Paslaugos

Export your HTML and then Just edit index.html with any text editor look for sentence <link rel="...................................>
Then delete all this sentence and copy this one
<link href="//PATH/favicon.ico" rel="shortcut icon" type="image/x-icon">
PATH = Where you have your favicon.ico
I usually copy the favicon.ico in the folder images so the sentence will be like this
<link href="//mydomain.com/images/favicon.ico" rel="shortcut icon" type="image/x-icon">
i hope it helps you
Sorry about my english, my spanish is much better
Juan Pedro Avila

Ipod touch does not show up under Devices in iTunes, but it does in iPhoto

My iPod touch does not show up under Devices in iTunes, but it does show up under iPhoto. Can anyone help troubleshoot this problem?
Thank you for your help.

try following the info here
http://support.apple.com/kb/TS3694#error1611
Error 1611: This error may indicate a hardware issue with your device. Follow the steps in this article. Also attempt to restore while connected with a known-good 30-pin Dock Connector cable, computer, and network to isolate this issue to the device. The MAC address being missing or the IMEI being the default value (00 499901 064000 0) can also confirm a hardware issue. Out-of-date or incorrectly configured proxy or security software, such as FoxyProxy, can cause error 1611. To troubleshoot third-party security software, follow these steps.

URGENT Lenovo g550 webcam does not show up in Device Manager and all drivers cannot be installed

Similar Messages

Maybe you are looking for