URGENT - Lookup Problem Again
It is working if I try to use JNDI to lookup the EJB.
Can the client program use env-ref (just like it is another
EJB program) and deferred the mapping to the real jndi-name in an external XML file?
Or JNDI is the only way ??
ejb-refs from a Java client aren't supported, only from a J2EE component.
Seth
Friend wrote:
It is working if I try to use JNDI to lookup the EJB.
Can the client program use env-ref (just like it is another
EJB program) and deferred the mapping to the real jndi-name in an external XML file?
Or JNDI is the only way ??
Similar Messages
-
I have a HP Pavilion dv6 with a fingerprint reader. I had the same problem as many other people when upgrading to Firefox 4, : I couldn't use the HP Simple Pass to enter a website needing a username and password by just swiping my fingerprint. I fixed the problem by downloading the new HPSimPlePass 7.0.74.0. This fixed the problem and I was very happy. Since upgrading to Firefox 5 I have the same problem again, but I already have the new version of HP Simple Pass. How can this be fixed so that I can use this fingerprint scan feature again, or where can I download Firefox 4 again?
''FredMcD [[#answer-709783|said]]''
<blockquote>
The programers know of this and are working on it.
</blockquote> -
I'm having problem again rendering a one hour presentation. If I use Command/R, the dialog box indicates seven or more days. If I highlight the selection I get essentially the same estimated time.
Command/R usually works, but not this time. Audio For Playback is checked.
The DV timeline plays in Quick Time OK.
I desperately need to get this video sent out! I even deleted preferences using the "Preference Manager" program.
DavidAll of my lecture video series are recorded in LP 16 bit audio. Each lecture is between 1 to 1.5 hr in length. I have successfully completed 10 of the 23.
Each lecture is sent to iMovie HD and then the timeline.mov is placed into FCE. One other time the timeline audio would not render, so I converted it to DV via MPEG Stream Clip and placed it back into FCE. The lecture I'm having trouble with is #11.
As mentioned, usually Command-R will do the trick in 10 minutes or so, not 6 to 10 days.
David -
Explorer problem again????
I got explorer.exe problem again,which was solved previously by creating new user account.I am free from problem for around 1 month and started again, and this time very frequently i am getting windows with message that
"Windows Explorer has stopped working".I am using windows 7 professional service pack 1.Please any body give permanent solution to this problem,Problem details are below
Problem signature:
Problem Event Name: AutoVerifierV2
Application Name: explorer.exe
Application Version: 6.1.7600.16450
Application Timestamp: 4aeba271
Fault Module Name: verifier.dll
Fault Module Version: 6.1.7600.16385
Fault Module Timestamp: 4a5bdb2a
Exception Code: 80000003
Exception Offset: 0000c0de
Status Code: 201
OriginalBucketID: 0
OS Version: 6.1.7600.2.0.0.256.48
Locale ID: 1033
Additional Information 1: e903
Additional Information 2: e90395e1c160c582c0a3c5e6d36ee788
Additional Information 3: f03b
Additional Information 4: f03b4ab77c5a1d7b156e29c2436e59a6Hello,
The TechNet Sandbox forum is designed for users to try out the new forums functionality. Please be respectful of others, and do not expect replies to questions asked here.
Since your post is off-topic, I am moving it to the
off topic forum.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book:
Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}}) -
URGENT BIG PROBLEM:during import track st. in queue simply does not disap
I have problem when importing transport request on production(the transport domain controler is on development system) . The track status in queue simply does not disappear.
I tried(based on what I have seen on an other thread) to delete the transport in import monitor and tp on OS level on productive and development system
Then I deleted entries in TRBAT&TRJOB tables. The TPSTAT is empty.
The problem persists.
What would you suggest . The go live depends on this problemHi,
/usr/sap/trans/buffer might still contain entries, be careful do not modify anything here.
Check the link
http://help.sap.com/saphelp_47x200/helpdata/en/3d/ad5b5a4ebc11d182bf0000e829fbfe/frameset.htm
Check the 'Cleaning up the transport directory' and 'Synchronizing the Buffers' links within the above link.
Please do not use subjects like : URGENT BIG PROBLEM.. it is against the rules of this forum.
Regards,
Siddhesh -
when i want to install windows7 on my snow leopard(10.6.4) with boot camp assistant,said that you must update your mac,i do this and try to install windows7 again but i have this problem again?what can i do?
Graham Giles wrote:
Have you seen this type of problem before? I think it could be a serious issue for anyone in a similar position.
No; but then, I've not had occasion to use TDM. I've been using firerwire drives for over 10 years, both FW400 and FW800, with no issues except a bit of instability using a B&W G3 machine.
TDM should be safe. Using cautious, manual copying of files from the Target machine to the Host machine should not result in unexpected loss of files or damage to the Target drive's directories. It should behave exactly the same as if it were an external (to the Host) firewire drive.
• I don't suppose there is anything I can do to 'put back' lost items from a separate Time Machine drive which has an up to date backup on it.
There is probably a way to do that - seems to me that's one of the reasons for a Time Machine volume.
On the other hand, if the Time Machine volume is rigidly linked to the now-absent OS on the original drive, there may be no way to effectively access the files in the TM archive.
I know that using a cloned drive would work well in this instance.
I have no experience with Time Machine, so perhaps someone who has will chime in with suggestions.
With the machine in TDM with the other machine, have you tried running Disk Utility to see if you can effect repairs to the drive? -
Why am I having update problems again?
When I started Muse today I received a message that there was a new update and did I want to install. I said yes and it proceeded, when complete I received this pop up message:
Title, Adobe AIR - "Intial content could not be loaded for this application. Try re-installing or contacting the publisher for assistance".
But you can't re-install because it shows it's already installed. This happen to me a month ago and I had to un-install Muse & reboot before I could re-install.
Why is this happening? Is there a way I could open up Muse without going through a un-install again. This only happens with Muse updates which occur when starting Muse, other Adobe updates that take place through the Creative Cloud control panel are fine.
I just tried again, same problemHelp Again.
My computer just doesn't like Muse & apparently CC programs. After all this time when starting Muse I have been ignoring the message to update because I'm afraid if I say yes I will have the above problem again. Today I got brave and said yes and Muse would not open again!
So I returned to this site and used the link you gave me before to reinstall Muse, when it finished it told me that there was a newer version 7.4 available and would I like to install it and I said yes, and it seemed to work and opens fine.
I also had a request to install the latest update of Creative Cloud so I said yes. Everything went fine. I got really brave and I noticed that there was a newer version of Muse CC 2014 and I installed it but now that CC and other CC programs tell me I need a sign in with my adobe ID to try a 30 trial, if I press the License This Software button it asks me for a Serial Number. Why can't I open CC programs without a serial number, I am a Creative Cloud member? I have 2 Icons on my desktop, Adobe Muse.exe which works and Adobe Muse CC that tells me I need a serial number. -
My Iphone Has a Restart Problem Again and Again wot To do?
MY Iphone Has a restart problem again and again wot to do please tell me
Basics from the user guide are restart, reset, restore from backup, restore as new. If you go through ALL of those steps and you still have issues, you need to get your phone checked out by Apple.
-
I sent email to [email protected] but the engineer there said he did not receive it. Also, I did not receive the email he sent to me through his sun.com email. it sounds a dns problem again.
I have changed our mx record to:
@ IN MX junk.domain.com.
before, it was:
@ IN MX junk ==>would this cause dns problems?
Here is the entry in the mail.log which seemed that sun has received my email successfully:
09-Dec-2005 09:39:10.59 tcp_local D 2 [email protected] rfc822;[email protected] [email protected] dns;btmx1.sun.com (relay1.sun.com [IntraStore TurboSendmail] ESMTP Service ready) smtp;250 recipient <[email protected]> OKYour log shows that Sun did indeed receive your mail.
Sun's mail infrastructure has been under DOS attack for some days. Sometimes that's caused delays of up to several hours for inbound mail to get to us.
We also have had some virus infected systems pounding our servers. More delays.
We do contract with an external company to scan for spam/virus scanning. Those folk historically have lost us some mails, too.
Your MX record isn't likely to make any difference in you sending out mail, but in your ability to receive mails, yes. -
CSS one-armed-config and SMTP reverse lookup problems?
I was wondering if there would be potential reverse lookup problems from other company's when we try to send mail to their mail Domains.
If I configure failover for our mail server, I am thinking if we are sending mail, there could be a reverse-lookup issue, because our mail server would be configured with public IP Addresses other than what the MX record points to in DNS.
If we originate mail from our inside users, it will originate from the service IP address and not the VIP address.
Is this a valid concern?The main advantage of this configuration is that the web servers will receive the IP address of the client that made the request. This is often required by web servers' administrators for accounting purposes.
In a one-armed configuration only, the network port ( Enet0) is used on the SCA. Only this specific port can be used for this setup. Encrypted and decrypted traffic will go through the same link
http://www.cisco.com/en/US/products/hw/contnetw/ps2083/products_configuration_example09186a00801bbf4e.shtml -
Hi all,
We are encountering performance problem again
The batch process deletes 1M rows every night which took 30mins the usual.
But last night (12AM) it took more that 2hrs and hangs.
Does it help if I run gather_schena stats regularly when there is constant DELETE on the table?
Please help me check our ASH, AWR, ADDM to resolve the issue.
ADDM
https://app.box.com/s/7o734e70aa2m2zg087hf
ASH
https://app.box.com/s/xadlxfk0r5y7jvtxfsz7
AWR
https://app.box.com/s/x8ordka2gcc6ibxatvld
Thanks....
zxyHi ARM,
***What is the SGA_TARGET or MEMORY_TARGET that the database is running on?
Our server has 8Gb Physical Memory and 8Gb Swap.
What is the ideal SGA_TARGET and MEMORY_TARGET shouldbe?
Our current setting is:
========
SQL> show parameter memory
NAME TYPE VALUE
hi_shared_memory_address integer 0
memory_max_target big integer 5936M
memory_target big integer 5936M
shared_memory_address integer 0
SQL> show parameter sga_
NAME TYPE VALUE
sga_max_size big integer 5936M
sga_target big integer 0
Thanks -
Post moved to infinity board http://community.bt.com/t5/BT-Infinity/BT-Problems-Again/td-p/544347
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’I was going to put it in the Infinity forum but as there were other similarish ones here, and that my problem is reagrding a connection issue (my modem gets Inifinity just fine), I thought thought the connection issues forum would be the correct place.
Also as HH3 is not Infinity specific, I thought the problem was not necessarily Inifinity specific either
Even so, thanks for putting in the correct place. -
Problem again with flickering and no firmware update
I've got the problem again....
I think I'll leave Imac world ....I had the flickering problem with my new iMac, it was resolved with the new software update to 10.4.6.
-
EJB from stored procedure lookup problem
We are running a test case with in an EJB deployed to Oracle 8.1.6, accessing it from a Java stored procedure. It works okay if the stored procedure is called a limited number of times from a single client (client is non-Java). However, for performance testing, we are trying to run it several hundred times in sequence to better simulate the eventual production environment. Consistently on the 216th call, it fails with a NamingException from the InitialContext lookup. We can restart the client again and it will fail on the same call.
Sounds like something memory related to me. Does anyone have any ideas? I'm using standard EJB client code in my stored procedure, instantiating an InitialContext, performing a lookup on the EJB, performing a home interface create, then accessing an EJB method.
Thinking it might be that my test was too fast for whatever garbage collection is being done on the server, I tried a 2 second delay between invocations--same problem occurs, however. Should I be making a call to remove my EJBs when my stored procedure ends? If so, how would I do that?
I did try making the handle to my EJB a static variable within the stored procedure and only "creating" the EJB once. That works okay with a single client, but if I run 2 clients simultaneously, 1 will work for awhile and then eventually die trying to call the EJB method--while the other client continues to run successfully.
I'm stumped. Any insight or guidance will be greatly appreciated. Thanks.My DBA bumped up the large_pool_size and java_pool_size settings and the problem went away. I couldn't convince him to bump the settings one at a time, so am not sure which one was at the root of the problem.
As I looked at the trace logs on the server, I also noticed that we were getting intermittent "peer disconnected socket" messages during the testing. That appears to have gone away with the pool size increases, also--in case that helps out anyone else. -
Hi,
The following message appears when I deployed to a local application server:
Error finding a suitable DataSource: Error looking up cmt-datasource at jdbc/DBConnection1DS (name not found)
I think that the problem is related to a parameter to a lookup function. What is the
expected parameter of lookup?.
Thanks,Atena,
Bad performance can be caused by many different things. Having 5 lookups in one page is no problem in itself. However, when the number of rows displayed in a lookup drop down list is large, page loading can become slow, in particular when you have a table layout, where the contents of the drop down list are included again for each row in the table. Changing the lookup displayType to "lov" should help in such a situation,
Another reason might be that the SQL statements behing the lookups are inefficient.
Steven Davelaar,
JHeadstart Team.
Maybe you are looking for
-
Data entered by user in the front end is lost when ever their is an error
Hi, I am working for an internal tool aplication which is used to enter/manipulate employee details. We are using ORACLE APEX for this. We have completed most of the application wr.t Master detail page But when we are testing we had this problem as b
-
Can't assign a string value to a member of type TEXT in Calculation Manager
I can assign a string value to that member of type TEXT using a run-time prompt of type StringToNumber. Example: "My Text Member" = {string_rtp}; However, I need to accompllish the same function without using a run-time prompts. I have a planning app
-
Can I add a second monitor to a TouchSmart 520-1070?
Can I add a second monitor to a TouchSmart 520-1070? Can it be done through a USB port with a USB to DVI converter?
-
Bridge Scripting Capabilities (CS3 Javascript)
Hi -- We have many users at our company who need to edit metadata in images (primarily jpegs, but some tifs). These users do not have access to Photoshop but do have access to Bridge. I have written a script in Bridge that opens a dialog window for t
-
this problem with audio began yesterday but before that it was fine! this is a brand new macbook pro...not even a week old!