Urgent - make collaboration services available in CLP

HI
Can u pls help me in the following case.
1. When i click on the collaboration link in the portal , collaboration lunch pad screen is displaying . But in that page nothing is displaying .
For that I refer the linkhttp://help.sap.com/saphelp_nw04s/helpdata/en/2b/f15a42fb771753e10000000a155106/frameset.htm.
But I m not able to find out the pre-defined Command Groups, Link Command and Types.
Can anyone suggest me what should be done for that .
Thanks
shashank
Urs answers must be appreciate !!!!

Hi,
If you check under
\<SYS-ID>\SYS\global\config\cm\reports
there you will find a set of reports indicating the status of the deployment of the configuration. Please check the number and the size of the files. If there are any files that are bigger than the rest (> 100-200 KB), that typically indicates an error during deployment. Also, normally ~70 files should be in there, if the number is lower, then some are missing.
The best solution in my opinion is just to try and redeploy the collabortation packages.
Regards,
Aditya

Similar Messages

How to make a service available at boot.

Can someone tell me how to make a service available at boot time via smf ? The question is for a generic service ( network/telnet for example ) and for a site one.
Is it enough to enable it via svcadm ?
Thanks.

yeah all you need to do is
svcadm enable /network/telnet
this will enable the service then and next time when you boot the system
(or i.e. svcadm disable apache2 if you want to disable the httpd)
have you tried man on svcadm?
Sharif

How do I make automator services available to all user accounts?

I wrote an automator script and made it a service (the standard one that shows all hidden files, or un-shows all hidden files) and I'd like to make it a system-wide service so all user accounts on my Mac can use it.
I'd prefer to not log in to each account to set it up as I feel that would waste space (I know, not much is needed) but more importantly if I have to change the script I only have to do it in one place.
How do I do this?
I have other scripts I'd like to make available to all too.
I'm currently running OS X 10.9.5 on a 2008 (not Pro) MacBook core 2 duo.

Thank you, Frank. I'm aware of the packages but didn't realize how it all applied.
I didn't post if it worked for other user accounts because at the time, I didn't know. It was late when I got it working for my primary account and decided to check it later, which I did this morning, and the services did show up for the other accounts. Yea!!
As far as the workflows being "corrupt", I still don't know why, either.
It was odd that when I did Get Info for that file the Preview section actually showed (but of course, very tiny) the Automator script, so clicking (double-clicking? D-C worked this morning) it opened with no errors in Automator. Permissions are still 777 (unix), but I'll change them back to 666.
Hey! 666 removed them from Services! And when I try to open the workflow in Automator it tells me the file is corrupt. Go figure.
The answer to that might be that the /Library/Services directory already existed (because of the MacExplorer app I installed) so it held LaunchMacExplorer.workflow. The permissions on that file are drwxr-xr-x@ 3 padr staff 102 Jan 27 2013 LaunchMacExplorer.workflow .
I always wondered why write was needed for a workflow. Read or execute (unix) should be good enough.
I changed some of the files to 751 to match the MacExplorer workflow and those not only changed the coloring (ls -al) in terminal but they also now show up in Services. Yea!

How to make a service available in SICF?

Hello all,
I'm looking to set up a demo showing some of our existing ITS functions in integrated ITS. For example I want to make IAC iViews of PZ07 & PZ14. I didn't see them available in sicf so I went to se80 and found/published both. I then expected to see them available in SICF for activation. They are still not there. I'm obviously missing a key step. When I try a Start Service in SE80 I get "http://hostname:port/sap/bc/gui/sap/its/pz07/ call was terminated because the corresponding service is not available."
I have activated the SYSTEM , WEBGUI & SHUFFLER services and can get available services to test properly. I just need to be able to publish/activate the ones I need.
Thanks,
Doug

Thanks Deepak,
I have created a service using those instructions and have it working as an IAC iView in the portal using the configurations below. It works but is missing styles, and generally looks rough compared to testing the service in SICF. I don't know why. I'm still confused as to why I can't run the out of box PZ07. It's in SE80. I have published it, but when I go to test it in se80 or run it in a portal IAC iView it fails with the following
"URL http://shrcin02.america.apci.com:8304/sap/bc/gui/sap/its/PZ07 call was terminated because the corresponding service is not available."
I also don't see it in sicf. Shouldn't this be available as a service in sicf once I publish it in SE80? Some PA** services are available though not activated. I know we've not used them. What dictates which services are available and which ones are not. Anyone have any idea what I am missing?
Thanks
Doug
This does work however though missing the webgui styles.
New Service
ZPZ07
~transaction=pz07
~GENERATEDYNPRO=1
Handler=CL_HTTP_EXT_ITS
System
ITS Description: Integrated ITS
ITS Host Name:hostname.america.apci.com:8304
ITS Path: /sap/bc/gui/sap/its
ITS Protocol:http
IAC iView
System=SAP_R3_HumanResources
Internet Application Component (IAC)=ZPZ07

Influxis to Host Collaboration Service

Dear LCCS Customer,
I’m pleased to announce Adobe and its partner Influxis have reached an agreement resulting in a hosted collaboration service offering based on Adobe’s LiveCycle Collaboration Service (LCCS) code. The new service will be known as Influxis Collaboration Service and is targeted to be up and running by early November, 2012. Influxis has been a trusted Adobe partner for 6 years, starting as a Flash Media Service hosting company and is now a leading interactive media delivery provider specializing in video solutions. Learn more about Influxis at http://ics.influxis.com/.
Influxis Collaboration Service will be built to support the same framework and offer the same feature set currently available via LCCS. Influxis welcomes all Adobe LCCS customers to migrate to Influxis Collboration Service. Initial services will include dedicated servers for enterprise customers and others interested in having their own personal server environment. Shared server hosting will soon follow and be in place by December 2012.
In order to minimize impact and in an attempt to make the transition from Adobe to Influxis as seamless as possible, Adobe will continue to run its LCCS service in parallel until December 31, 2012. During this time, Adobe will also provide Influxis with ramp-up support as needed.
Transition planning is well underway. Influxis has already begun working with Adobe LCCS customers to exchange ideas on how best to achieve a successful transition. If you are interested in talking to Influxis about their service offering please contact Wesley Daggett at 661-775-3936 or via e-mail [email protected]. In the coming weeks Adobe and Influxis will provide additional detail about the specific transition plans on the LCCS Forum - http://forums.adobe.com/community/livecycle/lccs.
Adobe and Influxis are excited about this new opportunity and will work together to ensure a successful transition for customers who choose to make the move from LCCS to Influxis Collaboration Service.
Regards,
Jeff Stanier
Group Product Manager - LiveCycle

Jeff,
Is there anyway that I can get a LCCS account to develop with whilst there is this limbo period before Influxis comes online with their paid service?
I am literally just trying to get the skeleton working while waiting.
Any help or insights from the community as well are welcome! :-)

What is the transaction code for see the Web Services available in SAP

Hi
I came to know that SAP has provided its own webservices... I need some information on that... If any one has documentation on that can u please send it to me... My ID is <b>[email protected]</b>.
What is the trasaction code for see the web services available in SAP.... Can any one help.. Please its urgent
Best Regards
Ravi Shankar B
Message was edited by:
RaviShankar B

Hi,
you can find Web Services (Enterprise Services) in the Enterprise Services Workplace (ES Workplace). The ES Workplace allows you to explore, test, and use enterprise services to make enterprise SOA tangible. Here, you will find all of the currently productized enterprise services by SAP.
Best Regards,
Boris Mueller
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/developerareas/esa/esapreview">ES Workplace at SDN</a>
<a href="http://esapreview.sap.com:82/socoview(bD1kZSZjPTgwMCZkPW1pbg==)/flddisplay.asp">ES Workplace</a>

Document or video tutorial for setting LiveCycle Collaboration Service in Flash Professional CS5

Hello,
I want to use Adobe LiveCycle Collaboration Service for my company, but the problem is, I work upon Flash Professional and i dont have grip towards Flex, the documentation that is provided with sdk is of Flex,
so, I want 2 types of help,
1) If i want to setup LiveCycle Collaboration Service , will i get the document for that,
If it is not available please provide me help for customizing skin of toolbar in SharedWhiteboard of LCCS,
Thanks,
Rajiv

(another potential double-post, don't know why my emails to the forum are being ignored...)
Hi Rajiv
For Flash-only projects, check out the 3 sample applications which start
with "Flash" - FlashUserList, FlashWebCamExample, and FlashSimpleChat. These
should get you up and running with CS5.
Unfortunately, if you're not using Flex, you'll find that the
SharedWhiteBoard isn't going to work - it's completely Flex based. You could
use the SharedWhiteBoardModel and write your own, but unfortunately
whiteboards are pretty complicated and require quite a bit of work (this is
why we didn't port it from Flex to Flash - no one has asked for it until
now, and it's a ton of work).
hope that helps
nigel

C3-00 chat : "no service available" + OVI mail won...

Hello all,
Bought a C3-00 goldenwhite 3 weeks ago, though never succeeded to connect to all the OVI applications (OVI chat, OVI mail + communities), which are the two main features that are the reason why i bought this phone
- chosen connection mode : WIFI only (because prepaid card)
- device system version 7.20 (upgraded last week, thought it would resolve the OVI chat/mail issue) : update causes me all audio files downladed from ovi store to be "corrupted file / license expired" whereas it was free content, deleting files and downloading again doensn't bring improvement to the issue
- restored factory settings but no improvement on OVI chat/mail application issues
- called my operator: unlocked access to OVI mail "settings" part but wonce account is created, the "connection" wheels runs for a while but nothing happens / still have the "no services available" problem in ovi chat while communities keeps on "updating profile" but nothing happens as well soI don't have proper access to my profile (because "updating profile still runs)
precision : i have no problem to connect to OVI store or any other website through the navigator, issue of "no service available" (chat) and neverending connection (ovi mail) that prevent access to mail is only with those 2 application + communities
eBuddy works fine
are there any settings to update?
thank you a lot for your help

@Nnova031: hello Well yes, youtube can work if You will make UDP configuration with some ports redirected on router, but this is no slution for me, because i have many wireless connections (few computers, wifi printer, other mobile phones/pda devices, and server with is got all ports redirected on it, rest of devices are using NAT).
The key to make everything work as it should is Nokia. They must fix using TCP/IP over WiFI (with NAT) by their apps. Without them they are just not useful, because all people bought this phones thinking they will use wifi and those really nice apps. Those apps are working well on GPRS/EGPRS for many reasons (like using some proxies by operators in configuration, by using external IP by device so all ports can be opened and waiting for data, while it is sooo insecure like hell, etc.).
I think it should be priority one for all Nokia developers to fix that, because they are selling product, that do not have options. that are reason 90% of all their customers did buy it. It is like buying car, that cannot drive without towing car.
Don't say you want to help - just do it! Happy user of Nokias: 6150 SAT (still work), 6021 (used as backup, still work), 5220 XpressMusic (Drown, screaming for Contact Service), C3-00 (my current phone).

FiOS TV Is the First to Make Pandora Widely Available to Subscribers --- really?

SO I read this posting:
http://forums.verizon.com/t5/Verizon-at-Home/FiOS-TV-Is-the-First-to-Make-Pandora-Widely-Available-t...
Was very excited because I live in Virginia in a FIOS featured community just minutes from Verizon headquarters. But it turns out that the Pandora Widget is not available to everyone in Virginia. I chatted with Technical Support and the response was that it has not been deployed to our "Message Center". Not sure what that means and they could not give me an approximate deployment date.
Would truly appreciate any information regarding this concern.
Regards!

jack mcgann:
you wrote:
... Only issue I have is that when I choose to start a station for an artist or group, sometimes the first song is not even for that artist or group! And usually, even after starting with the correct artist or group, after one, two, or three songs, it then switches to a different artist or group. Is it supposed to workt that way?
That is precisely how it should work. Check out the Pandora help files for a full explanation. Your artist selection is used as a seed to select similar songs, using their secret sauce ... er, algorythm. This gives you songs you didn't know about that share musical qualities with your "seed" songs. You can further refine the selection by "voting up" or "voting down" selected songs.
Justin:
You wrote:
....VHO is Video Hub Office. Here is a link to an explanation:
http://www.dslreports.com/faq/verizonfios/4.0_FiOS_Television#16492
Thanks! I'll check it out.
Also, I got a note from my enquiry direct to Pandora:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Hi Mark,
Thanks for writing. I did a little research and it looks like Verizon FiOS has only launched Pandora support in some states so far. Verizon has stated that this service "will be available in other FiOS TV markets in the coming months". You can find some more information here: http://forums.verizon.com/t5/Verizon-at-Home/FiOS-TV-Is-the-First-to-Make-Pandora-Widely-Available-t...
Hope this helps! And that you can use the FiOS Pandora app soon. Best,
David
Listener Support
PANDORA® internet radio
Need help? http://help.pandora.com
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Mark

Taxonomy feedback service, and all other collaboration services

Although feedback service is enabled in the taxonomy repository, which
is based on a CM repository hosting the files, feedback is not possible
on the taxonomy Iview.
Here some details:
this is the Displayed Properties in the CollectionRenderer for the
layoutset:
rnd:icon,rnd:displayname(contentLink),rnd:action, rnd:command
(command=give_feedback/style=small
button),contentlength,modified,modifiedby,created
this is what i see in my iview:
ICON Name actionhover 24 KB 15.11.06 Plotkowiak, Thomas 15.11.06
17:17:25
I am missing here the feedback function button.
When I apply the same thing, to the CM repository everything works as
it should, but when it is applied to the taxonomy all the collaboration
services do not work.
All the services are enabled on the taxonomy (see below)
Repository Services
Name
comment
feedback
layout
personalnote
properties
rating
subscription
Page 1 / 1
I am using EP6 SP17.
Thank you for your help.

Hi Thomas,
I've got a similar problem in my portal which is EP 7.0 SP9. Giving feedback wasn't enable regardless of setting appropriate command in CollectionListRenderer's property 'displayed properties'. We've created OSS message and they said that this is a bug and there is no workaround available till SP10. You should try to check the latest SP release for your portal version. There could be a solution of your problem.
Regards,
Michal

Apple needs to make auto fill available with privacy browsing.

Apple needs to make auto fill available with privacy browsing.

In no particular order...
You're basically asking for what Mac OS X Server provides. With the server version and a suite of tools including Server Admin, you can configure and manage the capabilities of the server, including the web server, DNS and all of the other available services.
Snow Leopard Server is a US$499 purchase, or can be acquired as part of the Mac Mini Server or Xserve packages.
The Apache web server present within Mac OS X client starts within via the sharing control panel, and various folks have posted directions for [manually starting php within the client package|http://labs.hoffmanlabs.com/node/1462]. The Mac OS X client packaging is "detuned" from what the server version provides.
A Mac Mini Server is more than capable of running dozens of web sites; the typical bottleneck will be the remote network bandwidth needed to serve the sites. The Xserve box is more than you'll need here.
All of the nice GUI stuff aside, you'll (still) want to learn the bash command shell, both for certain advanced configuration tasks and for troubleshooting and maintaining the server, and likely also for establishing your local archival strategy.

Collaboration Services Error

Hi,
We are on EP6.0 SP2.After doing all the configuration steps for Collaboration services like creating the clpType and userType, we are receiving the following error in the message box instead of the list of servies when we click on the Collaboration link in the tool bar:
''Item not found
/alias/<mycontacts>
The item you are attempting to access is not available. Check that the name or link is correct. You might also check whether the associated repository is currently accessible. ''
can anyone help?
Thanks in advance,
E_Portal Developer

Hi,
I' m having an error of the same kind.
item not found
/alias/userhome/<user.id>/favorites.
The item you are attempting to access is not available. Check that the name or link is correct. You might also check whether the associated repository is currently accessible.
Did you allready found a solution.
Kind regards
Kurt

Collaboration Services: How does specify a specific language to use?

Does anyone know how to administer the Leopard server in English, but have the collaboration services (wiki, blog, calendar, etc) run under another language, perhaps even specific to the User and/or Group?
(formerly posted in the wrong forum)

I just stumbled upon the solution.
Checking the collaborative services pages (wiki, blog, etc.) on an English system will show the pages in English. If you use a computer with another system language, that the pages render according to the primary system language. So if you're using a Japanese system, Safari will bring up the collaborative services in Japanese.

What will it take to get Apple to make iOS 6 available again?

As customers, what can we do to persuade Apple to make iOS 6 available again? I am well aware of the fact that no one put a gun to our head and made us download this new operating system. I even watched the Apple dog and pony show in June, so I should have known better! But as a senior user, I had no idea that the thin line fonts would be so hard to read. The phone keypad is a good example. Is anyone out there having similar problems?
Thanks in advance for answers to my questions.

Sadly, Apple codes the new updates in a way so you can't downgrade to the previous update, such as iOS 6.
But you can change the font! Go to:
SETTINGS>>GENERAL>>ACCESSIBILITY and there is a whole new section to customize the iOS 7 font.
[Source] Includes visual presentation if you need help changing the font.
http://www.imore.com/how-bring-bold-fonts-back-ios-7-your-iphone-ipad-and-ipod-t ouch
Hope this helps

How to use a standard service available in SOAP to ABAP proxy scenario?

Hello Experts,
My scenario is SOAP to ABAP proxy wherein I have to send Sales Order from Third party TC to SAP.
Third Party->SOAP Adapter->PI 7.1->ABAP Proxy->ECC.
I have seen a standard service available at the following URL.
http://esworkplace.sap.com/socoview(bD1lbiZjPTAwMSZkPW1pbg==)/render.asp?packageid=DEE98D07DF9FA9F1B3C7001A64D3F462&id=13A904EA0E8711DC5A11000F20FCB6A9.
Can I use the above web service for my current scenario? If yes, please explain how?
Thanks & Regards
Nidhi

Third Party--->SOAP Adapter--->PI 7.1--->ABAP Proxy--->ECC
I am actually looking for using standard webservice that has been provided by SAP in ESWorKSPACE available on sdn.
The WS that you mentioned is inbound and hence wont suit your requirement!
The reverse flow may however be possible.
Create Sales Order_V2
synchronous inbound service operation
Regards,
Abhishek.

Urgent - make collaboration services available in CLP

Similar Messages

Maybe you are looking for