Urgent| Master data activation error

Hi All,
I am getting error in activating the master data. The error is in filling the SID tables.
Actually I have added a new attribute in Master Data, now i want to make it as navigational attribute. But when i try to activate my master data it gives an error.
But if we try to activate master data without making it was navigational (i.e. keeping as only display) the master data gets activated.
Please help me in this as it is very urgent.
Regards,
Kshitij

Hi,
If your attribute characteristic you want to make NAV is brand new, first try to maintain its master manually with a value; activate the master data.
then try to reactivate your NAV in the other characteristic.
If this still doesn't work try the following
1. keep the attr as display for the moment
2. via menu Extra / DB Tables in RSD1, Fill attr SID table
3. reactivate the IOBj
hope this helps...
let us know...
Olivier.

Similar Messages

  • Master Data activation error after transport

    Hi,
    we have a problem in a custom master data. In development system we add 2 navigation attribute to the master data and then we transport in quality system.
    After the transportation of the IO the master data bacame inactive in quality and there is no way to reactivate them.
    The message error is the following:
    Charateristic ZAA_COB: Navigation attribute ZAA_COB__ZCTB00001 switched on (-> N.B long text)
    Characteristic ZAA_COB: Size of X/Y table does not fit P/Q table
    Error when activating InfoObject ZAA_COB
    We tryed with Tx: RSRV but the check produces dump error
    We tryed with a second CR with the only IO involved but the error was the same.
    We cannot delete the master data content.
    Any suggestion?
    Thanks
    Alberto

    we have a problem in a custom master data. In development system we add 2 navigation attribute to the master data and then we transport in quality system.
    After the transportation of the IO the master data bacame inactive in quality and there is no way to reactivate them.
    The message error is the following:
    Charateristic ZAA_COB: Navigation attribute ZAA_COB__ZCTB00001 switched on (-> N.B long text)
    Characteristic ZAA_COB: Size of X/Y table does not fit P/Q table
    Can you look up OSS or SDN on this particular message " Size of X/Y table does not fit P/Q table".
    Error when activating InfoObject ZAA_COB
    We tryed with Tx: RSRV but the check produces dump error
    This obviously means something is wrong. Take help of BASIS folks too to understand the Short-Dump.
    We tryed with a second CR with the only IO involved but the error was the same.
    We cannot delete the master data content.
    Since its Test, could you delete the data in all InfoProviders that use this InofObject, then, Delete Master Data and then re-transport. Later, load all these InfoProviders. Its one option.
    Obviously all the involved attribute are already transported in Test system. I tryed to adjust with se14 the M (view), X (SID) and P table of the master data tables. Now I have the two attribute only in the attribute tab of the IO but in all the tables they disappear.
    Did you do the "S-table too". not that it matters, since you are already there, you can complete it. Also, don;t get tempted to Delete Master Data from SE14 no matter what.
    I tryed to re-transport but i have always the same error.
    I already gave you option-1 above. Here is my thinking.
    Option-2: Go to DEV. Open the main InfoObejct in change mode. Go to the Attributes tab. There, there will be a small box where you can give numbers. Why don't you re-number them from "1" till the end. This is the sequence of how the attributes show up in pop-up boxes.
    ext, run the RSRV test on the InfoObject in DEV.
    After you do this, collect this InfoObject in a new transport and move it to Test.
    I am not sure it wil solve the problem, but its worth a try.
    But look into OSS notes on specific error message that you got. If I think of anything else, I will get back to you.
    Uday-Ram Chamarthy

  • Sap bw 7.3 master data load error

    sap bw 7.3 master data load error
    erroe: Exception in Substep Rules

    Hi Jayram,
    I am assuming that you are getting this error when you are loading data from PSA to IO. If so, the error might be because of
    1. Duplicate records
    PSA might have duplicate records. But you will be able to load only one record to Master data IO. In DTP Update tab, there is an option for "Handle Duplicate Record Keys" . Just enable this & try to load again.
    2. Erroneous records.
    Some special reocrds are allowed in PSA where as thye might not be allowed in Master Data/Data Targets like Lower case letters/ some speacial characters etc. If error is because of this, then you might need to correct the data at PSA level & reload the data to Master data. Else get it corrected in source system itself & fetch the data to BW. Or write some code to take care of these special characters.
    Hope it helps!
    Regards,
    Pavan

  • Attribute Change Run VS Master data activation

    hello guys
    I just want to know whats the difference between 'Attribute Change Run' and Master data Activation...For me,both seem to serve same purpose.......in which scenarios do we use them?
    Thanks and Regards
    S

    Hi S,
        Although they seem to be the same there are differences.
    Master Data activation.: When you load master data, they are loaded as D or M versions. Check the table as /BI0/P<infoobject tech name> , you will see different versions, if you have not activated your master data yet.
    Note : If you are checking for SAP standard objects, drop the 0 eg table for 0MATERIAL would be /BI0/PMATERIAL.
    When you activate master data, all D and M versions of records get transferred into A or active versions. So after activation, you should not find anything other than A versions.
    ACR: The use of an ACR is two fold. 1st use is that it performs the same action as a master data activation automatically.
    The 2nd function, is that it realligns the aggregates for the changed attributes
    let me give you an example.
    You have an aggregate based on material group which is an aggregate of material.
    Consider that you have a material X which initial belonged to group A.
    The aggregate would look like this
    Material Material Group Keyfigure
    X                  A                      100
    Now you change the material group of the same material as B
    The aggregate would not change automatically....ie it would still be X A 100
    To realign the aggregate,you use an ACR. After running an ACR, the aggregate would look like
    X B 100
    Hope this helps.
    Regards.

  • Abt master data activation and attribute change run

    There is any difference between master data activation and attribute change run

    Hi,
    Master data activation is activating the master data once you extract the data from source system the data will be in inactive state, so in order to make the data available we will activate the master data.
    Attribute change run :Its used to update the newly changed master data records to the Hierachies and aggregates.
    If you are already using the available master data in aggregates in InfoCubes, you cannot activate the master data individually. In this case we will use attribute change run.
    For attribute change run we have direct tcode: RSATTR or  In the main menu, choose the path Tools Hierarchy/Attribute Change.
    regards
    KP

  • Master data loading error(urgent)

    hi all,
      when i am loading master data by using 0INFO_REC_ATTR data source i am getting error"Value 'CV14AL1BM ' for characteristic 0MATERIAL is in external format ".AND
    "Record 1 :0MATERIAL : Data record 1 ('5300000000 '): Version 'CV14AL1BM ' is not valid "
    please any one help me.
    Thanks
    sada.k
    Message was edited by: sadasivarao kotaru

    Hi sada,
    if you will put your code in the start routine of the transfer rules, just put this piece of code in there:
    FORM STARTROUTINE
      USING    G_S_MINFO TYPE RSSM_S_MINFO
      CHANGING DATAPAK type TAB_TRANSTRU
               G_T_ERRORLOG TYPE rssm_t_errorlog_int
               ABORT LIKE SY-SUBRC. "set ABORT <> 0 to cancel datapackage
    $$ begin of routine - insert your code only below this line        -
    DATA: l_s_datapak_line type TRANSFER_STRUCTURE,
          l_s_errorlog TYPE rssm_s_errorlog_int.
    call function 'CONVERSION_EXIT_XXXX_INPUT'
    exporting input = datapak-matnr
    importing output = datapak-matnr.
    abort <> 0 means skip whole data package !!!
      ABORT = 0.
    $$ end of routine - insert your code only before this line         -
    ENDFORM.
    This should really solve your issue.You only have to make sure that XXXX is the name of the conversion exit for 0material in the maintenance screen for 0material.
    Siggi

  • Lock NOT set for: Loading master data attributes error

    Hi experts,
    We were encountering this error before when trying to load master data.  When we checked the system we could not find any locks at the time, and activation or kicking off the attribute change run failed again.  We finally solved the problem running FM RSDDS_AGGR_MOD_CLOSE which sets the close flag to 'X' in table RSDDAGGRMODSTATE.  I have read that it is possible this lock error happens when two change runs happen at the same time.
    My question are:
    1. is it possible to find out what process exactly "caused" the lock? the table RSDDAGGRMODSTATE does not have a reference to any object or job. I am curious as we are trying to find ways to avoid this in the future...
    2. in our case, when we could not find any locks, is running this fm the only work around? is this a best practice?
    mark
    Message was edited by:
            Mark Siongco
    Message was edited by:
            Mark Siongco

    Hello Catherine
    I have had this problem in the past (3.0B) --> the reason is that our system was too slow and could not crunch the data fast enough, therefore packets where loacking each other.
    The fix: load the data into the PSA only, and then send it in background from the PSA to the info object. By doing this, only a background process will run, therefore locks cannot happen.
    Fix#2: by a faster server (by faster, I mean more CPU power)
    Now, maybe you have another issue with NW2004s, this was only my 2 cents quick thought
    Good luck!
    Ioan

  • R/3 Master Data Load Error

    Hi Experts
       Our master data load from R/3 to BW was failed today.
    This is the error message on status Tab of failed request
    Diagnosis
    No IDocs could be sent to the SAP BW using RFC.
    System response
    There are IDocs in the source system ALE outbox that did not arrive in the ALE inbox of the SAP BW.
    Further analysis:
    Check the TRFC log.
    You can get to this log using the wizard or the menu path "Environment -> Transact. RFC -> In source system".
    Removing errors:
    If the TRFC is incorrect, check whether the source system is completely connected to the SAP BW. Check especially the authorizations of the background user in the source system.
    I navigated through Environment -> Transact. RFC -> In source system"
    In R/3 i got the following error
    timeout during allocate / CPIC-CALL: 'ThS
    #Timeout during connect                 
    How shall i proceed now.
    Thanks

    Hi,
    Check the RFC connection between R3 and BW. Use transaction SM59 for the same or take help from the BASIS team.
    If that is correct check the EDI partner profiles, if they are active and functioning properly. You can take BASIS help here.
    Cheers,
    Kedar

  • HR Master data serialization error

    Hi,
    I activated serialization on sender and receiver system:
    (Transaction SALE -> Modelling and Implementing Business Processes -> Configure Predefined ALE Business Processes -> Human Resource -> Master Data Distribution - > Serialize HR Master Data)
    After processing, some iDocs have status 51 - Serialization error for object &. Expected counter 000001 < 000002 in IDoc.
    I understand that when I get iDoc with too big serialization counter the iDoc should have status 66 (IDoc is waiting for preceding IDoc (Serialization)) and I should be able to reprocess the iDoc when I get iDocs with missing serialization counter. Am I right?
    So why do they have status 51 and not 66?
    Thanks for answer in advance.

    there is some inconsistency in the receiver system.
    for ex:
    sender system Company code is different from the receiver system. etc...
    Edited by: Ashok Kumar Reddy N on Feb 6, 2008 1:46 PM

  • HR Master Data Export error

    Hi all,
    I'm working at a client where we upgraded from 4.6 to 6.0. This client has never used the master data export program.
    I'm trying to configure the master data IDOCs, but I'm having an error when running the program RPCEMDU0_CALL. It refers  to an OSS note back in 2001, so that really does not apply to this installation. The problem seems to be with function module HR_PU12_UPDATE_T532K_T532L on IT0106. Some sort of data dictionary discrepancies. I haven't been successful in finding any newer notes related to this.
    Has anyone experienced this problem before?
    Thanks in advance for your response.
    Cesar

    Hi Bernd,
    Thanks for your response. I looked at that OSS note but it doesn't seem to be realted to the problem I'm having.
    The error reads:
    "Export program terminated   A009
    Export program obsolete, regeneration required
    Do not regenerate immediately: First make a  $STRUC_P0106 back up of the include
    PERNR N 000008 000000
    (See note 375108) This include is very important if old cluster IF records"
    I've re-activated the program and interface formats, but still getting the same error.
    Thanks again,
    Cesar

  • Master Data Activation

    Hi All,
    I have to activate a Master Data. When i use the path > select MD & right click & Activate MD, it displays a message that:
    " The master data cannot be activated directly since attributes of the characteristic MD are used in aggregates
    Start the change run via Admin. Workbench->Tools->Apply Hierarchy/Attribute Change, to activate the master data "
    When i use the path Admin. Workbench->Tools->Apply Hierarchy/Attribute Change to activate the MD, it again gives me the following message:
    " Hierarchy/Attribute change canceled (protocol/short dump) ".
    I am not able to analyze the problem. Kindly treat it as urgent.
    Best Regards,

    Hi Salil Bhaskar,
              Just De Activate the Aggregates for Some time, create a Process chain for following tasks,
    1) Deactivating the Aggregates.
    2) Schedulling the Master Data Attributes and Master Data.
    3) Activate the master Data.
    4) Schdulling the Transactional Data through Info package.
    5) Activating the Aggregates
    Assign the Points if Helpful.
    Regards,
    Rajdeep.

  • BW master data upload error..

    Hi all.
    Currently, Master data "OCOORDER attribute" was scheduled every morning.
    However, this data hasn't been succeeded for two months.
    After this data is running about 10 hours, I am receiving the following error message:
    1. The attributes for characteristic 0COORDER are locked by a change run.
    2. Error 1 in the update.
    3. Lock NOT set for: Loading master data attributes.
    We are using SAP BW 3.0.
    In the monitor for Change Run program "RSDDS_CHANGERUN_MONITOR", even though this data wasn't successfully loaded,
    it is showing following screen:
    "Characteristics to be activated"
    Did anyone of you have this problem before?

    hi,
    yes realignment run must have been executed after master data loading. you are right, realignment and master data can't be processed in the same time.
    0COORDER master data should not take 8 hours, it's too long, normaly master data should be in mins.
    if you are in bw 3.x, you may try to use process chain,
    here you can arrange realignment after all master data finished upload.
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/b0afcd90-0201-0010-b297-9184845346ca
    hope this helps.

  • Material Master Data Loading Error

    Hi All,
    I am loading master data for material. i got the following error.
    1. 0material_attr :
        Record 1 :0MATERIAL : Data record 1 ('000000000000010220 '): Version '000000000000010220 ' is not   valid
        Process :   If this message appears during a data load, maintain the attribute in
                         the PSA maintenance screens. If this message appears in the master data
                         maintenance screens, leave the transaction and call it again. This
    2.0material_text : Data record 1 ('000000000000010220E '): Version '000000000000010220 ' is not valid
       Process :  Same as above.
    I have applied RSKC tcode in BI with ALL_CAPITAL, ALL_CAPITAL_PLUS_HEX, and one special character string. but still getting the same error.
    Regards,
    Komik Shah

    Hi All,
    Thanks for the reply. i have solved most of errors. but there are some errors like this
    Diagnosis
        Data record 261 & with the key '000000000000132559 &' is invalid in
        value '10x8x5 &' of the attribute/characteristic 0SIZE_DIM &.
    System Response
        The system has recognized that the value mentioned above is invalid, and
        has processed this general error message. A subsequent message may give
        you more information on the error. This message refers to the same
        value, even though it does not state this explicitly.
    Procedure
        If this message appears during a data load, maintain the attribute in
        the PSA maintenance screens. If this message appears in the master data
        maintenance screens, leave the transaction and call it again. This allows to maintain your masterdata
    which string i should have to add in RSKC to remove this error ? i have already added  the ALL_CAPITAL, ALL_CAPITAL_PLUS_HEX.
    I have assigned points.
    Regards,
    Komik Shah

  • Master Data Loading Error

    Hi,
    While loading the master data from R/3 below error message getting.
    Error Message:DUMP:ABAP/4  Processor:ASSIGN_TYPE_CONFLICT.
    Thanks,
    Jayapal.

    hi,
    Check..
    /thread/261418 [original link is broken]
    Data Load Short Dump (ABAP/4 processor: ASSIGN_TYPE_CONFLICT)
    Also, Check..
    OSS note 971584 - ASSIGN_TYPE_CONFLICT in the DTP program
    Regards
    Lavanya

  • Master data table error in PC

    Hi Gurus
    i am trying to run a data transfer process for BPARTNER but when i do it it gives me an error...that master data table is already locked..how to go about resolving it..points not an issue

    Hi,
    Goto tcode SM12, give the user as * and then execute it & in the next screen search BPARTNER
    there it will show you the entries for locks on this infoobject if any....
    It will show you the user who locked, the process (Eg: Change Run or some other data load) which locked & so on....
    & then if needed delete locks....
    And then try starting your load...
    Rgrds,
    Habeeb

Maybe you are looking for