Urgent : Material Changed in a purticular month
hi,
i have to make reoport in whihc i have to diplay the changes made in purticular month along with following deatils:-
1.) Name of d person who made change.
2.) Which Tcode had been used to make the change.
3.) Description of changes made.
Currnetly i am using tcode MM04 in whihc it use to display the changes for 1 purticluar material and also i am using the Tables MSTA and CDHDR.
PLZZ HELP ME OUT IN SOLVING THIS PROBELM AS HELP WILL BE DEFINATELY REWARDED.
Edited by: ric .s on Jan 22, 2008 5:18 AM
Hi ric,
1.) Name of d person who made change.
You will get it in CDHDR-USERNAME
2.) Which Tcode had been used to make the change.
You will get it in CDHDR-TCODE
3.) Description of changes made.
You will get it in CDPOS-VALUE NEW(Changed Value)
You will get it in CDPOS-VALUE OLD (Old Value)
Similar Messages
-
Regarding display of material changes- really urgent
hi,
i had assigned a work in which i have to collect information that in the period from 1.12.2007 to 31.12.2007 the number of materials had been changed and what changes had been made to them.
plzz tell me about it as help will be definately rewarded.Hi,
PAss cdhdr-objectclas = MATERIAL
cdhdr-udate = sel. screen value
get all changenr from cdhdr
pass all to the cdpos-changenr & objectclas = MATERIAL
from cdpos-chngind = 'U' means material changed
and if chngind eq 'I' means material entry created.
else, MSTA is already there to just know which mat. created pass ersda value
and for changed pass laeda value.
Reward points for the helpful answer....
Regards,
Brijesh Patel -
Issue on payroll area which is changing from biweekly to monthly in Mid of
Dear Experts,
I have an issue on payroll area which is changing from biweekly to monthly in Mid of the Month.
One employee was retired on 29th of March, so his payroll area was changed from biweekly to monthly on 29th. For retire we are running the payroll on 8th of every month. When we are running payroll for April he has received only 29th and 30th retire salary, by the time he is not yet retired also.
In this case the main problem is monthly payroll time is early then biweekly. so the employee is getting retire salary then his regular pay.
Can you guide me where we can control that monthly payroll area should not be triggered at this movement.
Thanks
ChandraYou can do that but it is not that easy as it sounds if you have to do that over a period of say 10-20 years...lot of operational work!!
Also say if you load the retiree action one month ahead say on 03/01/2011. And the employee is retiring on 03/29.
Retire payroll is on 04/08
Biweekly is on 04/15
Now you decide to lock the employees after the 1st biweekly check of March...say which was process 14 days before 04/15 would be 04/01. The employee number is locked between 04/01 to 04/15. For 14 days you have locked these employees!!
What happens if there is adjustment pay...you have to manually go and unlock the employee and lock him after the adjustment check.
I will let you decide based on the comfort, SAP effort, Operational effort and system maintenance. -
Macro calculation to change for one particular month of year.
Hi All,
I have a query for change in macro. WE have a macro to calculate Target inventory which has same calculation for all through future months for 18 months. Now my user wants to change this all future months calculation would be same except for September every year. Now What function do I use in condition for calculation to check if month is September than do a different calculation.
Thanks
sivaHi Verma,
As u need to exclude the spetemner month you need to add the code in of clause.
If
new condition
Month(row) = 9
result row
else
result row.
Inthe result row u can do ur calcualtions...
You can do this in a new step for the exception you want to maintain.Hope this will help you.
Let me knw if u have further doubts.
Thanks
karthik -
ALE distribution of planned material changes made using MM12
Greetings,
I have searched and come up empty-handed looking for an answer, perhaps someone in this forum can point me in the right direction. I am trying to find out if there is a tcode and idoc message type that will distribute a planned material change, prior to it's activation, while it is still in it's planned state. While in the source system, I can see these changes in mm14, I do not see the "future" values as part of the MATMAS generated by a BD10, nor as part of the ECMMAS generated by a CC92 transaction. Ideally we could allow material master changes in our source system on a future date using the same ECM number as a BOM change for example, and distribute these changes together to the target system, prior to the ECM effectivity, without further requiring a additional BD10 to be performed after the material change activation date. Does anyone have advice on this? Thank you for any info you can provide.1. Activate change pointers
2. Customize it to check for status before activation and trigger the distribution. (I think it should generate even if the material is not activated so no customization required - but just test and confirm. It's been a while I've looked at this).
3. Maintain this in your distribution model and distribute master data accordingly. -
How to differentaite between material created on & material changed ??
Hi all,
How to differentiate between material created and material changed???
is there any flag or indicator present to differetiate between two....please guide me.
Thanks,
AshuHi Ashu,
I just want to clarify one point from you.
i always prefer to hit MARA with below feilds, if you want track singe change of the material
ERSDA - Creation date
ERNAM - Name of Person who Created the Object
LAEDA - Date of Last Change
AENAM - Name of person who changed object.
some times material may change multiple times, in these cases we need to hit CDPOS and CDHDR
to track the material changes....
or you can create a custom table with the feild time & date of change...and when ever material getting changed
in the ME21n exit update one entry in custom table.
Many Thanks
Raghu -
Tom tom changes: Until about a month ago, one of the selections under "Navigate to" was "contacts". That selection is no longer available. Can I get it back?
contact Tomtom
-
Change quarterly quotas to monthly in SAP Pipeline Manager
Hello
Is it possible to change quarterly quotas to monthly quotas in the SAP Pipeline Performance Management CRM module without using ABAP code? I have been looking for a solution but I can't find anything.
RegardsAlthough the path vary between release - webservices for Solution Manager are usually available in transaction SICF
under the following path
/default_host/sap/bc/solman
/default_host/sap/bc/bsp/sap/solutionmanager
However I am not aware of an webservice/interface from CHARM to 3rd party service desk products
What is provided as of Solman 7 is an interface between SAP Service Desk and other 3rd party service desk products
- so if you setup Solution Manager Service Desk you can have a business process from
Openview ---> SAP Service Desk ---> SAP Charm
Best wishes
Stuart -
How can we change horizone period from Months to days in credit management
Hi SAP SD gurues,
Can anybody tell the procedure "how to change Horizone period from months to days in credit management in "OVA8" . As you may get month is greyed out in horizone period settings. Advance Thanks with warm regards.
KartikDear Sadhu,
Sorry still i am not satisfied with your answer.As you hav told to go through the TC OVBI, there i found it is no where or little related to Horizon period of Credit management of SD module. In OVBI it is meant for "Maintain Billing plan type for Period Billing". Yes there is a combo box called "HORIZON", but i believe the purpose of this Horizon is diffrentthan the "Horizon period in SD Credit management. Pls correct me and explain me how it is related if i am wrong. Hope you'll do so.Thanks for yr valuable reply.Kartik... -
Hi Gurus,
I would like to implement a workflow with a mail which wil be triggered whenever a material is changed.
I have created a workflow using SWDD..How can I link this workflow to Material change transaction(MM02)..
I am new to this workflow...Pls help me...
Thanks in advance...
Regards,
SajHi,
you need to create an event for your change document BOR 1001006 thru SWEC.
create a similar event in your BOR Event and use this event in the Basic Data of your WF.
So whenever a material is changed your event would trigger your WF.
Hope I am clear,
any issues reply back to this thread.
Aditya.
P.S
just a suggestion, could you put in your name instead F1 (as I like referring to names, though I just address all by initials) offcourse no hard n fast rule,
but since its a <b>wonderful Forum</b>, lets know each other .
Well my friend I still have no issues with your Display Name, it was just a thought. -
Hi Experts,
The requirement is to receive a standard Idoc for material change and trigger the material creation process in case the material does not exist.
Secondly, what is the Idoc for material change?
Thanks and Regards,
RaviHi,
Go through the following Steps for Creating IDoc Via ALE
ALE IDOC
Sending System(Outbound ALE Process)
Tcode SALE ? for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 ? Create Model View
Tcode BD82 ? Generate partner Profiles & Create Ports
Tcode BD64 ? Distribute the Model view
Message Type MATMAS
Tcode BD10 ? Send Material Data
Tcode WE05 ? Idoc List for watching any Errors
Receiving System(Inbound ALE )
Tcode SALE ? for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 ? Check for Model view whether it has distributed or not
Tcode BD82 -- Generate partner Profiles & Create Ports
Tcode BD11 Getting Material Data
Tcode WE05 ? Idoc List for inbound status codes
ALE IDOC Steps
Sending System(Outbound ALE Process)
Tcode SALE ?3 for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 !V Create Model View
Tcode BD82 !V Generate partner Profiles & Create Ports
Tcode BD64 !V Distribute the Model view
This is Receiving system Settings
Receiving System(Inbound ALE )
Tcode SALE ?3 for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 !V Check for Model view whether it has distributed or not
Tcode BD82 -- Generate partner Profiles & Create Ports
Tcode BD11 Getting Material Data
Tcode WE05 !V Idoc List for inbound status codes
Message Type MATMAS
Tcode BD10 !V Send Material Data
Tcode WE05 !V Idoc List for watching any Errors
1)a Goto Tcode SALE
Click on Sending & Receiving Systems-->Select Logical Systems
Here Define Logical Systems---> Click on Execute Button
go for new entries
1) System Name : ERP000
Description : Sending System
2) System Name : ERP800
Description : Receiving System
press Enter & Save
it will ask Request
if you want new request create new Request orpress continue for transfering the objects
B) goto Tcode SALE
Select Assign Client to Logical Systems-->Execute
000--> Double click on this
Give the following Information
Client : ERP 000
City :
Logical System
Currency
Client role
Save this Data
Step 2) For RFC Creation
Goto Tcode SM59-->Select R/3 Connects
Click on Create Button
RFC Destination Name should be same as partner's logical system name and case sensitive to create the ports automatically while generating the partner profiles
give the information for required fields
RFC Destination : ERP800
Connection type: 3
Description
Target Host : ERP000
System No:000
lan : EN
Client : 800
User : Login User Name
Password:
save this & Test it & RemortLogin
3)
Goto Tcode BD64 -- click on Change mode button
click on create moduleview
short text : xxxxxxxxxxxxxx
Technical Neme : MODEL_ALV
save this & Press ok
select your just created modelview Name :'MODEL_ALV'.
goto add message type
Model Name : MODEL_ALV
sender : ERP000
Receiver : ERP800
Message type :MATMAS
save & Press Enter
4) Goto Tcode BD82
Give Model View : MODEL_ALV
Partner system : ERP800
execute this by press F8 Button
it will gives you sending system port No :A000000015(Like)
5) Goto Tcode BD64
seelct the modelview
goto >edit>modelview-->distribute
press ok & Press enter
6)goto Tcode : BD10 for Material sending
Material : mat_001
Message Type : MATMAS
Logical System : ERP800
and Execute
7)goto Tcode : BD11 for Material Receiving
Material : mat_001
Message Type : MATMAS
and Execute --> 1 request idoc created for message type Matmas
press enter
Here Master Idoc set for Messge type MATMAS-->press Enter
1 Communication Idoc generated for Message Type
this is your IDOC
Change Pointers
I know how to change the description of a material using ALE Change Pointers.
I will give the following few steps
1) Tcode BD61---> check the change pointers activated check box
save and goback.
2) Tcode BD50---> check the MATMAS check box save and comeback.
3) Tcode BD51---> goto IDOC_INPUT_MATMAS01 select the checkbox save and comeback.
4) Tcode BD52---> give message type : matmas press ok button.
select all what ever you want and delete remaining fields.
save & come back.
5) 5) go to Tcode MM02 select one material and try to change the description and save it
it will effects the target systems material desciption will also changes
6) goto Tcode SE38 give program Name is : RBDMIDOC and Execute
give Message type : MATMAS and Executte
ALE/IDOC Status Codes/Messages
01 Error --> Idoc Added
30 Error --> Idoc ready for dispatch(ALE Service)
then goto SE38 --> Execute the Program RBDMIDOC
29 Error --> ALE Service Layer
then goto SE38 --> Execute the Program RSEOUT00
03 Error --> Data Passed to Port ok
then goto SE38 --> Execute the Program RBDMOIND
12 Error --> Dispatch ok
Inbound Status Codes
50 Error --> It will go for ALE Service Layer
56 Error --> Idoc with Errors added
51 Error --> Application Document not posted
65 Error --> Error in ALE Service Layer
for 51 or 56 Errors do the following steps
goto WE19 > give the IDOC Number and Execute>
Press on Inbound function Module
for 65 Error --> goto SE38 --> Execute the Program RBDAPP01 then your getting 51 Error.
hope this helps you.
plz reward if useful.
thanks,
dhanashri. -
Hi all,
How to check material changes from last year to current year in material master levelHi,
You can check it in the Change or display mode of Material master MM02 / MM03 it self or by transaction MM04.
In MM02 / MM03 transaction, click on the 'Environment' tab from menu bar then select Display changes. A pop up will be displayed with the list of all changes for that material in the system. Select the required line and click on the details (F2). Complete changes will be displayed.
Regards,
Hiren Ramani -
I changed my data plan yesterday. I should have set it to change at the new month which is tomorrow. can i fix this?
I don't know if they'll be able to change it or not, but it's worth calling Customer Service ASAP (since you indicate your billing cycle starts tomorrow, so that would be midnight tonight) and asking.
Customer Service
Dial *611 from a cell phone
(800) 922-0204
Monday - Sunday 6 am - 11 pm -
Logon image needs to change automatically for corresponding month
Hi All,
We have a requirement where in,the logon image needs to change according to the month.If Jan then 'mage A'if Feb then 'mage B' simillarly for dec.We have 12 images.How can i acheive this?Kindly help in this regards.
Thanks in Advance,
Nagaok, then you have to change login module, try using scheduler servlet, which will create time interval. Also you have to copy all images in one folder location in server, but check with image name because it might affect.
Edited by: Yogesh Galphade on Feb 23, 2011 7:41 PM -
Reg: Material change Management.
Dear Friends,
can i get some information about Material change management.
Please let me know..
thanks in advance.Hi,
Pl go through the sap help... will get deatail idea.
[http://help.sap.com/erp2005_ehp_04/helpdata/en/d8/731cab4b7511d1894b0000e8323c4f/frameset.htm]
Maybe you are looking for
-
How is the best way to make a curved line in keynote?
I have the new version of keynote but using the "curved line" in 'shapes' is not easy to make a symmetrical curved line. Can you suggest other simple ways to accomplish this?
-
Add and remove modules in Apache
Is it possible to add and remove modules within Apache (actually compile an relink Apache) with a source download form Apache.org (1.3.28?) and incorporate the necessery modules and configuration from Oracle?. I have looked for some kind of documenta
-
Chrome, Mountain Lion and Full Screen Interactive Mode
I'm running into an issue when entering Full Screen (Interactive) Mode-- long story short, the Message and "Allow" button are over-magnified and don't appear on the screen for me to click, thereby making it impossible to use other keystrokes (and see
-
Time Capsule fast backup, SLOW internet!
I hope someone can help me with this issue...it seems like it only just started a few days ago. So I have a 1TB time capsule and the wireless backup is really fast..like multiple MB/s. However, the internet surfing speed is really slow. YET, download
-
Error - Stack state no roll memory
Hi, We have deployed our BSP application for appraisals. This is a custom application which is a copy of standard BSP application HAP_DOCUMENT. We are facing a problem in the production environment, we are getting a number of abends (error - STACK_ST