URGENT - Migrating from 9i to 10g designer

Hi All,
I have installed new repository for Designer 10g (10.1.2.0.2) and
I have started Migration from Designer 9i (9.0.2.80.10).
I have error message from ckrau61 with cause:
"No Designer Repository has been detected.
Please check connection details and try again".
I have checked TNSNAMES.ORA and haven't found any error. Other
software works with old repository (9i) and i have checked the TNSNAMES.ORA on the server and not on the client ... Oracle is trying to build a db link and it is tested ok.
The Migration from 9i is not supported in 10g?
Help-me!!!!
Any tips would be helpful. Thanks.

You do not have to install a new Repository and "migrate" your data to upgrade from Designer 9i to Designer 10g. You just install the 10g Designer client, connect to your existing 9i Repository and "upgrade" it to 10g.
Please refer to the "Upgrading a Release 6i, 9i, or 10g Repository" section in the Repository Installation Guide for complete details.
- Suresh

Similar Messages

Migrating from 9i to 10g designer

Is there documentation on migrating Designer/Repository from 9i to 10g.
We have a 9i database and 9i designer. What are the specific steps to be done.
I know oracle normally has a migration path for its products.
any tips would be helpful.

Documentation is in the release notes. Actually, it is quite simple.
First backup your Repository with the Repository Administration Utility (RAU).
Install Designer 10g - this can be done in the same ORACLE_HOME as 9i or in a new ORACLE_HOME if you wish. Do this for all Designer users that share your Repository - once you upgrade the repository, old versions of Designer won't be able to use it.
Then start RAU again. You will notice that the Upgrade button, which is normally grayed out, has become active, and some of the other buttons are grayed out. Use the Check System Requirements utility to make sure that your Repository Owner has all of the needed permissions and that other configurations are correct. It is particularly important that the registry settings that point Designer at "imp" and "exp" point to versions that are compatible with your database version. By the way, the latest version of the Repository requires at least Oracle 9iR2.
Finally, press the Upgrade button and start the upgrade. This will take a while but went pretty smoothly for me.

Reports Migration from 6i to 10g

In my Project we are having many reports .and we are trying to Migrate those from 6i to 10g can anyone tell me what are the suggestions i can make during this process .. i am the only person who is going to involve in complete migration solely. Any Ideas and suggestions welcome ..

Hello,
Oracle Reports: Migration from 6i to 10g
http://www.oracle.com/technology/products/reports/migration/index.html
FAQ Migration
http://www.oracle.com/technology/products/reports/htdocs/faq/faq_migration.htm
Regards

Report generation failed after migrated from 6i to 10g.

Hi All,
i have migrated the 6i application to 10g.
There was a report which was generated in .html format and saved to a remote server location.
Now after migration to 10g,when i run the report through the URL ,It is still generated on the same remote server location but the it is not showing in the application interface.
Please help....
Thanks,
DK

Hi, Mike,
user3211655 wrote:
Hi All,
We try to migrate a 8i database to 10g by using the exp and imp. All tables and data are already migrated by imp. During the imp, there are errors said the trigger compile with errors.
When login to the em to check, I found these 2 errors.
Line # = 2 Column # = 1 Error Text = PL/SQL: SQL Statement ignored
Line # = 2 Column # = 60 Error Text = PL/SQL: ORA-00942: table or view does not exist
My trigger is a very simple one:
BEGIN
Select TB_COUNTER_SEQ.NEXTVAL INTO :NEW.INCREMENT_NUM FROM DUAL;
END;
And I'm sure the "TB_COUNER_SEQ" is there.
Do I need to change anything on the trigger when migrating from 8i?
In fact, besides this trigger, all other trigger imp to this schema are having the same error. The schema in the 10g is a newly created one, is there any special right I need to create grant to this new user?Grant the necessary privileges on the tables (and any other objects used, like sequences) directly to the owner of the triggers. Privileges granted to a role don't count in AUTHID OWNER stored procedures; the privileges have to be granted to the owner of the stored procedure (or to PUBLIC).
It the error is occurring at position 60, then it looks like you don't have privileges on dual. Login as SYS and
GRANT SELECT ON dual TO PUBLIC;You may need synonyms (perhaps public synonyms) for the objects, too.

Problem in migrating from 6i to 10g and I need help

I'm trying to change my program from 6i to 10g
I migrated libraries and
every thing is ok but when I try to migrate forms I had this error
ERROR opening D:\10gnkinkos\SHIFTS.fmb :oracle.forms.jdapi.JdapiException: A subclassed module could not be found during loading
Check subclass and library dependencies

With "the browser opening a white page" do you mean that the Forms Java applet won't start at all or is it starting with a Forms with a white canvas without any items on it?
If it is the first (Java not starting) there must be something wrong with your Forms setup. First try to run with the default setup without specifying a form. It should display test.fmx that it is included with the Forms setup. This Forms just tells you the setup succeeded and displays a single OK button

Poor performance on reports that were migrated from 6i to 10g

We are migrating from 6i client server to 10g reports server and getting poor performance on various reports. Reports that work in seconds in 6i are taking much longer to run or even timing out.
Reports Server:
Version 10.1.2.0.2
initEngine = 1
maxEngine = 20
minEngine = 1
engLife = 1
engLife = 1
maxIdle = 30
The reports are being called from 10g forms with the following:
T_repstr := '../reports/rwservlet?server=rep_aporaapp_frhome1'
|| '&report='|| T_prog_name
|| '&userid='|| T_nds_uid;
|| '&destype=cache'
|| '&paramform=yes'
|| '&mode=Default'
|| '&desformat=pdf'
||' orientation=Landscape';
web.show_document(T_repstr,'_blank');

Using these and not hearing much bad
Init Engine 1
Max Engine 6
Min Engine 0
Eng Life 10
MaxIdle 30
Trace Error
Trace Replace
I set my Report Server Parameters
CACHE SIZE - 700
CACHE DIRECTORY = (you have to decide)
IDLE timeout 120
Max Connections 120
Max Queue Size 4000
trace options = trace_err
trace mode trace_replace

Oracle 10G Installation and Migration from 6i to 10G and

I never had the opportunity to Install or Migrate oracle any version.
We are in the process of Installing Oracle 10G and moving Oracle Forms and Reports from 6i to 10G. I am asked by my superiors to conduct the interviews and decide which candidate will be best. These are temporary positions but are very important as a wrong candidate will affect the entire project. Need the right candidate.
I would like some hints or suggestion as to what skills should I test or what questions to ask.
Any sites or any questions will help me.
Thanks to All

See,
to read how we performed the upgrade and see some issues:
http://www.oracle.com/technology/products/forms/index.html
http://www.oracle.com/technology/products/forms/htdocs/upgrade/index.html
http://www.oratransplant.nl/category/oracle/forms/6i-to-10g-upgrade/
Good Luck!!

Trigger compile with after migrated from 8i to 10g

Hi All,
We try to migrate a 8i database to 10g by using the exp and imp. All tables and data are already migrated by imp. During the imp, there are errors said the trigger compile with errors.
When login to the em to check, I found these 2 errors.
Line # = 2 Column # = 1 Error Text = PL/SQL: SQL Statement ignored
Line # = 2 Column # = 60 Error Text = PL/SQL: ORA-00942: table or view does not exist
My trigger is a very simple one:
BEGIN
Select TB_COUNTER_SEQ.NEXTVAL INTO :NEW.INCREMENT_NUM FROM DUAL;
END;
And I'm sure the "TB_COUNER_SEQ" is there.
Do I need to change anything on the trigger when migrating from 8i?
In fact, besides this trigger, all other trigger imp to this schema are having the same error. The schema in the 10g is a newly created one, is there any special right I need to create grant to this new user?
Thanks a lot.
Mike

Hi, Mike,
user3211655 wrote:
Hi All,
We try to migrate a 8i database to 10g by using the exp and imp. All tables and data are already migrated by imp. During the imp, there are errors said the trigger compile with errors.
When login to the em to check, I found these 2 errors.
Line # = 2 Column # = 1 Error Text = PL/SQL: SQL Statement ignored
Line # = 2 Column # = 60 Error Text = PL/SQL: ORA-00942: table or view does not exist
My trigger is a very simple one:
BEGIN
Select TB_COUNTER_SEQ.NEXTVAL INTO :NEW.INCREMENT_NUM FROM DUAL;
END;
And I'm sure the "TB_COUNER_SEQ" is there.
Do I need to change anything on the trigger when migrating from 8i?
In fact, besides this trigger, all other trigger imp to this schema are having the same error. The schema in the 10g is a newly created one, is there any special right I need to create grant to this new user?Grant the necessary privileges on the tables (and any other objects used, like sequences) directly to the owner of the triggers. Privileges granted to a role don't count in AUTHID OWNER stored procedures; the privileges have to be granted to the owner of the stored procedure (or to PUBLIC).
It the error is occurring at position 60, then it looks like you don't have privileges on dual. Login as SYS and
GRANT SELECT ON dual TO PUBLIC;You may need synonyms (perhaps public synonyms) for the objects, too.

What is the right tools to migrate from developer suite 10g to 11g?

Hi all..
Im kinda new here and hope pro can help me in the right direction. I've been developing forms and reports in 10g which is using the developer suite. My company would like to migrate to 11g. However, i see that there are no 11g developer suite. it must have rename it something else or provided to developer in a different name or so.
Could someone clarify this and give me a link to what i need to develop forms and reports in 11g. Im sure im going to need the weblogic as well.
I did find a post where user states that there is no more developer suite in 11g but i find his answer a bit unclear. So i was hoping someone can give a link to what i really need in order to continue with 11g.
Thanks

In brief a migration from 10g to 11g is just a recompile, nothing more. There were some built-ins removed in 11g which were deprecated in 10g (like run_product for example) so if you have some dead code containing this built-ins you will get compile errors. But as those built-ins didn't do anything in 10g you should be able to remove them without a second thought.
As for developer suite: there is no developer suite anymore like there was in 10g; There is only one complete bundle containing the development as well as the deployment components, and you can choose at installation time which components you want to install. You can install the IDEs and omit some of the components you won't need in 11gR1 or install the development version in 11gR2.
You can find the install bundles here.
Before you start installing it is a good idea to review the certified system configurations.
cheers

Portal Migration from 9i to 10G

Hi all
Iam new to Portals, We will be getting a portal migration project from 9i to 10G.
I need to know the upgradation procedures needed to do the same. It will be very helpful if anyone can refer me any good document or white paper for this.
Thnx in advance
Sriram

Hi
I recommend before migrate to a new version, review the export and import, because this a bug in the portal 10G Don´t clone that's why is not function is the 10G version. you cand find documentation about migration and requiriments in the Oracle portal section. Be carefully with the indications in the pdf documentation and do a plan B if you have problems with the migration.
Best regards
deepjavero

Does migration from 6i to 10g affect on Graphs in Forms

Hiiiiii Masters
I am on migration from form 6i to 10g , and i need to migrate the Graphical application too.
Here i came to know that there is no Graphical support in 10g..
What should i do? Can any one give me the steps...
Thanks and Regards
Swap

check this document,
Oracle® Forms Migrating Forms Applications From Forms 6i

Migration from 6i to 10g.

Hi,
1.     Is it possible to migrate forms 6i directly to forms 10g using 10g dev. suite? Or do we have to migrate first to forms 9i first?
2.     What is the latest available forms development environment in production and can we use that for our forms migration from 6i?
3.     Does forms 9i and 10g works with 9i, 10g and 11g databases?

You can Migrate directly from 6i to 10g Release 2, but probably not with Migration Assistant alone. It will take an average of about 1 day per Form to accomplish this with Migration Assistant. There are many things that MA just doesn't take care of, and I have seen alot of complaints with the Formatting of the Forms after. Not to mention Reports.
Edited by: ChrisBaker on Jan 4, 2010 5:36 AM

Stored procedures not working after migrating from 8i to 10g

The Oracle stored procedures are generating an error following upgrading a ColdFusion web application from Oracle8i to 10g release 2.
"Error","jrpp-102","05/28/08","13:35:09","insite","Error Executing Database Query.[Macromedia][Oracle JDBC Driver][Oracle]ORA-06550: line 1, column 7: PLS-00306: wrong number or types of arguments in call to 'S_DEFAULT_LETTER_SETTING' ORA-06550: line 1, column 7: PL/SQL: Statement ignored The specific sequence of files included or processed is: new_letter.cfm, line: 63 "
I've been looking at this for about 3 days with a colleague in the office. We can resolve this be recreating the stored procedure with a new name (e.g. adding the suffix "_v2"). Its not really practical for us to do this throughout the system. Anyone know what the root cause might be?
I'm currently connecting to Oracle10g using SQLTools and Oracle8 client. I've yet to upgrade to Oracle10 client.
I've tried selecting all the stored procedures and re-compiling them but it appeared to make no difference.

The Oracle stored procedures are generating an error following upgrading a ColdFusion web application from Oracle8i to 10g release 2.
"Error","jrpp-102","05/28/08","13:35:09","insite","Error Executing Database Query.[Macromedia][Oracle JDBC Driver][Oracle]ORA-06550: line 1, column 7: PLS-00306: wrong number or types of arguments in call to 'S_DEFAULT_LETTER_SETTING' ORA-06550: line 1, column 7: PL/SQL: Statement ignored The specific sequence of files included or processed is: new_letter.cfm, line: 63 "
I've been looking at this for about 3 days with a colleague in the office. We can resolve this be recreating the stored procedure with a new name (e.g. adding the suffix "_v2"). Its not really practical for us to do this throughout the system. Anyone know what the root cause might be?
I'm currently connecting to Oracle10g using SQLTools and Oracle8 client. I've yet to upgrade to Oracle10 client.
I've tried selecting all the stored procedures and re-compiling them but it appeared to make no difference.

URGENT: Migrating from SQL to Oracle results in very poor performance!

*** IMPORTANT, NEED YOUR HELP ***
Dear, I have a banking business solution from Windows/SQL Server 2000 to Sun Solaris/ORACLE 10g migrated. In the test environment everything was working fine. On the production system we have very poor DB performance. About 100 times slower than SQL Server 2000!
Environment at Customer Server Side:
Hardware: SUN Fire 4 CPU's, OS: Solaris 5.8, DB Oracle 8 and 10
Data Storage: Em2
DB access thru OCCI [Environment:OBJECT, Connection Pool, Create Connection]
Depending from older applications it's necessary to run ORACLE 8 as well on the same Server. Since we have running the new solution, which is using ORACLE 10, the listener for ORACLE 8 is frequently gone (or by someone killed?). The performance of the whole ORACLE 10 Environment is very poor. As a result of my analyse I figured out that the process to create a connection to the connection pool takes up to 14 seconds. Now I am wondering if it a problem to run different ORACLE versions on the same Server? The Customer has installed/created the new ORACLE 10 DB with the same user account (oracle) as the older version. To run the new solution we have to change the ORACLE environment settings manually. All hints/suggestions to solve this problem are welcome. Thanks in advance.
Anton

On the production system we have very poor DB performanceHave you identified the cause of the poor performance is not the queries and their plans being generated by the database?
Do you know if some of the queries appear to take more time than what it used to be on old system? Did you analyze such queries to see what might be the problem?
Are you running RBO or CBO?
if stats are generated, how are they generated and how often?
Did you see what autotrace and tkprof has to tell you about problem queries (if in fact such queries have been identified)?
http://download-west.oracle.com/docs/cd/B14117_01/server.101/b10752/sqltrace.htm#1052

DB migration from 9i to 10g (in a new server) using a cold backup

We have a cold backup of a 9.2.0.5 database,
we would like to migrate this 9i DB to a new server with only 10g software already installed.
1- can we use DBUA to do the migration?
2- should we start the database before running DBUA?
3- if yes then we need to prepare the pfile, and the password file?
we would like to avoid installing 9i in the new server
Thanks for help

I have to Install 10g on Solaris 10 on a new server and then move my old >database which is 9i on Solaris 9 to the new box. I'm not sure how to go about >doing all this right since I'm new in the dba field and this is production.How much down time you have to perform this activity?
How big is your database?
Since you're moving the database from one server to another, You have to proceed with Export/import or datapump export/import(only if you can upgrade your 9i database to 10g).

URGENT - Migrating from 9i to 10g designer

Similar Messages

Maybe you are looking for