Urgent !!! Mission Critical !!! Must help PLZ !!!

Ok, I just couldn't resist it's a whimsical Tuesday. I do have a question though.
What is your favorite mid-afternoon snack? Come on I'm getting hungry here.
PS.

TuringPest wrote:
cotton.m wrote:
TuringPest wrote:
cotton.m wrote:
TuringPest wrote:
cotton, you're like school on sunday.I never went to school on a Sunday so I wouldn't know. I did however attend summer school four straight years if that counts for anything. I kept failing English. Long story.suffice it to say, there's NO CLASS!
Forty nine hundred posts and you still don't know how to set a classpath?!?i see. a duke wh0re with a sense of humor. tell me this, what are you going to do when you get DUKE CRABS!When I get 13 more dukes I will be retiring to a small thatched hut in Bora Bora to live off the interest of my duke riches.

Similar Messages

LASERJET M1217 nfw MFP urgent help plz

HAY GUYS, NEED URGENT HELP!!!!!!!!!
My printer M1217 nfw MFP had a problem with the scanner and it was fixed bu updating the firmware and the scanner works fine and offcourse i printed the config. report befor updating the firmware , the problem is that i lost the report and i cant config. the fax or the wirless connection . any help plz guys

kelsaeed wrote:
HAY GUYS, NEED URGENT HELP!!!!!!!!!
My printer M1217 nfw MFP had a problem with the scanner and it was fixed bu updating the firmware and the scanner works fine and offcourse i printed the config. report befor updating the firmware , the problem is that i lost the report and i cant config. the fax or the wirless connection . any help plz guys

Touchpad cable Installation-Please Help, Mission Critical! Probook 4420s

The small, "L" shaped cable end that connects from the motherboard to the end connected to the touch pad is disconnected. The end is "L" shaped, with vertical portion of the "l" a solid blue plastic piece, labeled MB on one end. The horizontal portion of the "L is smaller, at the bottom, and has a metal connector (not Copper) one one side, blue on the order. I know to insert it into the motherboard port labeled "finger", but I'm unsure how the end connects correctly. This is a mission critical PC, as my office is closed, and need I need to connect to our Citrix environment. Would some please provide me with some instruction, or a video of how this can be installed? This is not a driver or device setting issue, only a hardware install issue.
Thanks,
Josh

Howdy slowpoke43, and a warm welcome to the forums!
Please help! I am just faking it here based on a few message boards I've read. Will this actually work properly?
LOL, if your faking it you're the best!
1. Yes, absolutely... no CCC would be best in my experience/opinion.
2. Yes, the more he better... Free Space is no longer our Free Space, but OSX's.
3. Indeed, & if you have the correct version of DW, do that.
4. Yes, not long, A/C power is great.
How to format your disks...
http://www.kenstone.net/fcphomepage/partitioningtiger.html
(To Install OSX on an IntelMac the Drive it needs the GUID Partitioning scheme mentioned at the bottom.)
Thanks to Pondini, Formatting, Partitioning, Verifying, and Repairing Disks...
http://web.me.com/pondini/AppleTips/DU.html
6. Yes, boot off the 10.6 DVD, & no Snow Leopard does by default what we used to call an Archive & Install, saves & updates all your info, APPs, Music, etc., it may quarantine a few things or not but will tell you.
7. Absolutely, but Panic won't be needed with your great preparation & Bootable Backups!
8. Not quite sure I understand, but run SL for a few days before you do anything.
9. Yeah, but again with you doing everything right from the gitgo, I can't picture that happening.
10. Yes indeed, the hangup with yours is that it only holds 2GB of RAM... a pain in 10.5 & up IME.
Again let me say... GONGRATS, I've never ever seen anybody so well prepared & informed despite your diffidence!

Help Plz.......!!!!its urgent

hi nokia users
flash lite on my 5530 only plays youtube videos,and when tried to play videos on other sites then it says flash player is required............do ui use any software that supports web videos...???
help plz.....
thanks in advance

Falshplayer vedio cant acces in your device?

!!!! Urgent Database Control Not working, Plz help !!!!!

Hi,
I have a webservice and in the same server(weblogic 9.2) a data source(cgAppSource) is configured. the database control is not instanciating properly, it is always remains null despite the calling of webservice. I am getting NullPointerException in the webservice. First time I am using annotation to execute a SQL query. It is urgent.can anyone please help me. what code change I have to do in both the files.
SampleDatabaseControl.java -
package control;
import java.sql.SQLException;
import org.apache.beehive.controls.api.bean.ControlBean;
import org.apache.beehive.controls.system.jdbc.JdbcControl;
@org.apache.beehive.controls.api.bean.ControlExtension
@JdbcControl.ConnectionDataSource(jndiName="java:comp/env/jdbc/cgAppSource")
public interface SampleDatabaseControl extends JdbcControl ,ControlBean{
 static final long serialVersionUID = 1L;
@JdbcControl.SQL(statement="SELECT SYSDATE FROM DUAL")
public String returnSysDate() throws SQLException;
The webservice : ControlWebservice.java
package service;
import javax.jws.WebService;
import javax.jws.WebMethod;
import javax.jws.soap.SOAPBinding;
import weblogic.jws.WLHttpTransport;
import org.apache.beehive.controls.api.bean.Control;
import control.SampleDatabaseControl;
@WebService(name="ControlWebservicePortType", serviceName="ControlWebservice",
 targetNamespace="localhost")
@SOAPBinding(style=SOAPBinding.Style.DOCUMENT,
 use=SOAPBinding.Use.LITERAL,
 parameterStyle=SOAPBinding.ParameterStyle.WRAPPED)
@WLHttpTransport(contextPath="ControlWebserviceProj", serviceUri="ControlWebservice",
 portName="ControlWebservicePort")
public class ControlWebservice {
 @Control
 private SampleDatabaseControl SampleDatabaseControl;
 @WebMethod()
 public String returnDate()
 String returnValue = null;
 try{
 returnValue = "This message sent date :" + SampleDatabaseControl.returnSysDate(); // getting null pointer Exception here.
 catch(Exception e)
 e.printStackTrace();
 return returnValue;
}

Hi james,
In that link it says to 'Create a Beehive-enabled Server Domain' in which On the second page(named Select Domain Source), I need to place a check in the Apache Beehive checkbox . But in my machine when I follow the steps I dont find any such checkbox in the (named Select Domain Source) page. Is this the problem? I can see only two check boxes. The page looks like......
Generate a domain configured automatically to support the following product. // radio select
Weblogic Server (Required) //check box
Workshop for Weblogic Platform // check box
Base this domain on an existing domain. //radio select
Templatelocation .... // a browse option
Do I need to do some other configuration to make beehive check box active in the page? All the beehive jars are present in the instalation. And as far as I remember I did the full instalation of Weblogic 9.2 after downloading from the bea site. and I am giving the beehive related jar

beehive-controls.jar,beehive-jdbc-control.jar,weblogic-jdbc-control.jar in the lib folder wnder WEB-INF and deploying.

Could I use EJB in mission-critical task,like telecom realtime billing?

We will begin a project about telecom billing.The key point of the project is the realtime billing,which is must be processed with high speed and efficiency.We have a plan to use Tuxedo on which to run some services coded by c lanaguage.Other management facilities and interfaces with other system could be built by java(EJB).
Now ,I am wonder why couldn't we using EJB in billing task ? Is there any success story about using EJB model to build mission-citical system? or is EJB good for that?
thanks

Joy Wind,
AFAIK, The answer is NO. Java itself is not "currently" suitable for real time applications.
However, there is a community process going on at http://www.rtj.org/.
There is also a reference implementation available which you can check out.
http://www.timesys.com/prodserv/java/index.cfm
I guess you can use it for proto-types and demos. However, if you want to use it in some mission critical application then you have to wait till it becomes a part of standard java.
hope this helps.
regards,
Abhishek.

How can we create a Collective search help plz tell me with steps

How can we create a Collective search help plz tell me with steps
thanks,
basu

Hi
1) Elementary search helps describe a search path. The elementary search help must define where the data of the hit list should be read from (selection method), how the exchange of values between the screen template and selection method is implemented (interface of the search help) and how the online input help should be defined (online behavior of the search help).
2) Collective search helps combine several elementary search helps. A collective search help thus can offer several alternative search paths.
3)An elementary search help defines the standard flow of an input help.
4) A collective search help combines several elementary search helps. The user can thus choose one of several alternative search paths with a collective search help.
5)A collective search help comprises several elementary search helps. It combines all the search paths that are meaningful for a field.
6)Both elementary search helps and other search helps can be included in a collective search help. If other collective search helps are contained in a collective search help, they are expanded to the level of the elementary search helps when the input help is called.
CREATION:
Go to SE11 Tcode
select search help
give the 'z' search help name and create
select the selection method ur table name eg : 'mara'
dialog module 'display value immediately'.
add the field whatever u want and lpos = 1 and spos = 1 and check import and export parameter.
where left position when displaying and spos = search position
and then save and activate ..
See the links:
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ee38446011d189700000e8322d00/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ee45446011d189700000e8322d00/content.htm
pls go through this for search help creation
http://help.sap.com/saphelp_nw2004s/helpdata/en/41/f6b237fec48c67e10000009b38f8cf/content.htm
Search Help Exits:
Re: dynamic values for search help
Re: Dynamic search help
Reward points for useful Answers
Regards
Anji

Bbm help plz !!

Help plz I just got a bb and want to restore my old pin it says restore via email which is right then open email and says blackberry have to authrouise it have been waiting days no luck??

Please try the below procedure . .
STEP ONE: Registering your email address and creating a backup
Open BlackBerry Messenger
Press the Menu key
Select Options
Select Back Up
Select Back up files remotely
A listing of email addresses that are associated with your BlackBerry smartphone will appear. Highlight the preferred email address, press the Menu key and select Edit Email Status followed by Register
Click OK
After completing these steps, your BlackBerry smartphone will automatically backup your BlackBerry Messenger details over the wireless network!
STEP TWO: Restoring your BlackBerry Messenger information
Since BlackBerry Messenger is now performing remote backups, transferring your BlackBerry Messenger information to a new BlackBerry smartphone is a breeze! The only requirement is that you must associate the same email address you used to register with the BlackBerry Messenger servers in step one, with your new smartphone. For help associating your email address, visit the BlackBerry Internet Service Email Setup and Integration website, which will guide you through associating the email address you registered in step one on your new BlackBerry smartphone.
After you have associated your email address, complete the following steps to restore your BlackBerry Messenger information:
Open BlackBerry Messenger
Press the Menu key
Select Options
Select Restore
Select Restore using email
A listing of email addresses that are associated with your BlackBerry smartphone will appear. Highlight the email address you registered during the backup process, press the Menu key and select Continue
Click Continue
Once these steps are completed, you’ll notice that all of your BlackBerry Messenger information is available on your new BlackBerry smartphone
Please update the result after applied..
Thanks

Im new to the 5g ipod help plz

will the ipod turn off if i leave it on pause? i know i have a really stupid question but help plz thx

Yes.

My Apple TV is not working. On tv display, I'm getting unsupported signal. Check your device output. Can anyone help plz.

My Apple TV is not working. On tv display, I'm getting a message 'unsupported signal. Check your device output. ' Can anyone help plz.

connect it to a tv which support full hd and go into the settings and lower the resolution as much as possible and then connect it with your tv once more

I have just getting a new phone and I have forgot my password an Apple ID what I made new for the new phone now I cannot get on it because asking for id and password what should I do help plz thank u

I have just getting a new phone and I have forgot my password an Apple ID what I made new for the new phone now I cannot get on it because asking for id and password what should I do help plz thank u

Try
https://iforgot.apple.com

I lost my phone and i got an unlocked 4s from my gf she used it before an its still connected to her icloud is there a way i can restore my icloud back up to replace hers without messing up the unlock also my latest backup isnt showing on my pc help plz!!

i lost my phone and i got an unlocked 4s from my gf she used it before an its still connected to her icloud is there a way i can restore my icloud back up to replace hers without messing up the unlock also my latest backup isnt showing on my pc help plz!!

Please please help me, if you know how.

How to implement drop down list in WDP Abap....very urgent...please help me

Hi Gurus,
I wanted to implement the drop down list button in the WDP Abap interactive form. Once the users clicks on the drop down button, an RFC should be called and display the details under the drop down button. Please give me the logic with code. Its very urgent...please help me. Please note that it is in WDP Abap interactive forms. We are using NW2004S, ECC6.0.

Hello,
you have to use ZCI form to use DDLB in WD-ABA. The content of the DDLB has to be present at rendering time, there is no dinamic call when you click the "dropdown".
The attribut you map to the DDLB has to be an element with a value-set, and the value set has to contain the text / value pairs.
>> this will be displayed when you click the dropdown.
Best regards,
Dezso

I cant get voice over to work on my 4G shuffle it clicks off every time help plz

i need help plz it wont work

Hello,
Welcome to Adobe Forums.
Try uninstalling Adobe Flash Player from Flash Player uninstaller : http://helpx.adobe.com/flash-player/kb/uninstall-flash-player-mac-os.html#main_uninstall
Try a clean installation using this KB : http://helpx.adobe.com/content/help/en/flash-player/kb/installation-problems-flash-player- mac.html
Thanks,
Vikram

My iPhone 5s was bought with full price in the USA from Sprint, and I was told that it is a global phone. And I can use it in china. But I can not use it in the USA, so could you mind help me to solve that problem. I think someone of you must help me to

My iPhone 5s was bought with full price in the USA from Sprint, and I was told that it is a global phone. And I can use it in china.
But I can not use it in the USA, so could you mind help me to solve that problem.
I think someone of you must help me to solve this problem !
Details:
SN:F2*****FDR
<Edited by Host>

See the response in your other thread:
https://discussions.apple.com/message/24641427#24641427

Urgent !!! Mission Critical !!! Must help PLZ !!!

Similar Messages

Maybe you are looking for