Urgent mm issues road permit regis. & prod. move.analysis

Hi gurus,
Please help me it's urgent.
1.The client wants report of the road permit register for incomming and outgoing material.
2.Report of production movement analysis.
3. Stock register for finished goods as per excise and conversion material as per service tax rules.
Guru's please help me it's urgent. Full point will be awarded for correct answer.
Thanks N regards,
Siddhartha Chatterjee

SDN is the place to discuss technical problems..
Please avoid such weird post.
G@urav.

Similar Messages

A very urgent deployment issue about DBAdapter

Hello All,
I have a very urgent deployment issue about DBAdapter.
That DBAdapter is connect to DB2 AS400 Database. I have a developing database (jdbc:as400://server01/TEST) and a production database (jdbc:as400://server01/PROD).
During developing, I used DBAdapter wizard to create it, and import some tables, and set the Adapter to use jabc/DB2DS as connection information for easily deployment later.
Then I deploy to Production. I configured Data-source.xml and oc4j-ra.xml rightly; I set DB connection point to production database. But the DBAdapter still write into developing Database.
I checked the DBAdapter, the imported tables are something like this, TEST.table1, TEST.table2. And there are a lot "TEST" located in DB2Writer_toplink_mapping.xml, DB2Writer.xml, TEST.schema, DB2Writer.table1.ClassDescriptor.xml.
This TEST is refrer to the TEST in connect String jdbc:as400://server01/TEST.
I think this might be the reason cause the problem. As to production database, "TEST" should replaced by "PROD". If I changed it manually, I have to change every time when switch between TEST and PROD. And I also don't know if it is safe to do it? (I tried, and bring some toplink mapping problem)
By the way, for Oracle Database, because we use 2 instances for testing and production with same schema name, and do not have this issue.
Anyone could help and many thanks.
Kerr
Message was edited by:
Kerr

Hi Kerr,
The idea is to set up all connections in the BPEL or ESB services with logical names, e.g. typically of the form eis/DB/MyFinancialSystem or eis/DB/MyLogisticsSystem. This way, you do not have to modify code when deploying it onto different environments that serve different purposes.
When moving your services through their lifecyle, on every environment you deploy these to you will have the same logical connections configured on each instance, e.g. for DEV, QA, SIT, UAT and PROD. Only, in case of QA the actual physical connection is configured to point to the QA instance of the systems that your services interact with whereas in case of UAT it points to the UAT instance of the same system.
Maybe your problem is caused by connecting as user "SomeUser" when running the DB Adapter wizard during development and actually selecting objects from a different schema than you used to connect with, e.g. "Test" in your case.
Hth,
Sjoerd

Issues With Permissions With iTunes/iMac

Hey there - I hope someone out there can help me. I have all my media files (music, movies etc) on the MacHD. There are two profiles on the iMac...for myself and my partner. I have over 200 gigs of stuff that we both pull from. Lately, my partner is getting errors saying he does not have enough permissions to purchase from the iTunes store or even add to the library. This had happened before, and Apple support told me to move all files to the MacHD and point iTunes to that folder and all is well. Did that...and here we are again. I was told iTunes has to have the files where it wants them or it will not function and will not allow either profile to add to the library. I want to have both profiles pull from the same library and add files and so on. I also want iTunes to cooperate and do what I tell it to do. Anyone else have this issue with permissions?

I do not think that iTunes usually plays well with this kind of combined user library. But the real iTunes gurus hang out in the iTunes Apple Discussions.
Dah•veed

Road Permit at the time of GR

Hello All,
I want to know,whether in std SAP "the details of Road Permit can be given at the time of GR"..?
Plz revert me back..

Give it as a cdn type in PO , so that u can post the road permit at time of GR.
regards

DPEXP issue. Permissions? Toad version?

So yes, I am a newb here, but am wondering if this problem is a simple issue of permissions.
I have system privs on this database, and am using the following expdp wizard code through Toad10:
DUMPFILE="firsttestdatapump.dmp"
LOGFILE="exp_firsttestdatapump.log"
DIRECTORY=A006_DPEXP
SCHEMAS=('AVD_KEYWORDS', 'CPRC', 'DMAM1')
CONTENT=ALL
JOB_NAME='firstdatapumpexp'
Export: Release 10.2.0.3.0 - Production on Monday, 22 March, 2010 8:50:12
Copyright (c) 2003, 2005, Oracle. All rights reserved.
Connected to: Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production
With the Partitioning, Real Application Clusters, OLAP, Data Mining
and Real Application Testing options
ORA-31626: job does not exist
ORA-31633: unable to create master table "LDAPUSER.FIRSTDATAPUMPEXP"
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 95
ORA-06512: at "SYS.KUPV$FT", line 980
ORA-01950: no privileges on tablespace 'SYSTEM'
Thoughts?
thank you!

It may not be that easy....
I am finding out quickly that this issue I am having is tied to an LDAP aliasing issue. NOTES for those encountering like issues:
1. datapump operates server side, vs. locally like exp/imp (this is one of the reasons we see perf boosts).
2. Since it operates server side, references to storing files (and reading files) locally don't work so well.
SooOOOOooo after granting unlimited on SYSTEM to "LDAPUSER" (the alias to my admin account) I ran into issues reading log files, etc... because what I was trying to do is export directly to an external HDD on my local machine.
So now, I am working on trying to figure out how to export to a local external hard drive.....using datapump.
This is interesting stuff!!
I hope your all doing well!
~dallas

Issue with settlement of prod. order (KO88)

Hi Friends,
We are facing a issue while settlement of prod order using with tcode KO88.
In production Order, the distribution rule is created for account assignment category MAT (material) with settlement type PER (periodic settlement). We have added category CTR (cost center) with type PER to distribute percentages as 50% & 50%.
When we check the distribution rules in Production order system says its OK with-out error but when same is settled with KO88 system shows an error "Settlement type PER: Total percentage in distribution rules <> 100%".
Please help.
Regards,
Rohit

Hi Siva,
I looked into this OSS note and seems to be relevant for this error.
Thanks for the reply and i am closing this thread.
Regards,
Rohit

Move Analysis from test OBIEE server to production

Hi all,
how do I move Analysis from test OBIEE server to production without re-creating it again from the beginning?

Check this link
http://www.rittmanmead.com/2011/02/obiee-11g-migrations/
Look at Catalog manager part.
Navigate to the specific folder/report using Catalog Manger and then select the report(s) and then File Menu archive and specify the folder to save the archive
Move them to Prod box and the Open Catalog Manger and navigate to specific folder and File menu Unarchive select the path for file
http://docs.oracle.com/cd/E23943_01/bi.1111/e10541/prescatadmin.htm#i1044262
If helps mark
Edited by: Srini VEERAVALLI on Feb 19, 2013 12:18 PM

Urgent. Issue with converted .mov files to avi not working in Premiere.

I am trying to import video files that I have converted from .mov to .avi through OjoSoft Total Video Converter and anytime I try to put a file into the work area, the video goes to Video 1, and Audio goes to Audio 4. When I try to play it I get no audio, and the video jumps from frame 1 to frame 2.
Does anyone know a good converter or know the best way to convert and what filetypes to do so? They work converting them as MP4 video files, but I like avi's better.
I have tried converting the .mov to mpeg4 and H.264 (Both with audio as MP3). They will play in Windows Media Player after convert but not in premiere...
I am running Premiere CS4 on Windows7 with no direct codec packs installed. I opened a video/audio file that I worked on before with no issues...video/audio run flawlessly in Premiere.
Please help!

What are the codecs in the original MOV files and what are the codecs after conversion? Use GSpot to identify them.

JSFL reg point move does not save correctly

I have come across an issue in flash pro while using commands written in jsfl.
I have a jsfl command that moves registration points on a selected library instance. A snippit of the command that does the moving is:
fl.getDocumentDOM().enterEditMode('inPlace');
var ele = fl.getDocumentDOM().getTimeline().layers[0].frames[0].elements[0];
ele.x = 0;
ele.y = 0;
ele.x = -ele.left;
ele.y = -ele.top;
ele.x += newRegX;
ele.y += newRegY;
fl.getDocumentDOM().exitEditMode();
After running the command everything looks good. The reg point has been moved to where I want it to be.
However, if I save and reload the fla the registration points show back up where they were before the move command.
It seems like the jsfl move values are not being saved correctly. Is this something others have seen before? Is there a fix to this issue?
Thanks.

Yes I have also found the saving bug when messing with the transform point and jsfl.
I was trying to move the registration point to the current transform point.
First version of the code it all worked fine but after saving and opening again only the first frame had moved.
Second version of the code I went through all the frames and selected then deselected all alements on each frame - this seemed to fixed the issue. - manually doing it did.
However I then noticed I was still haveing some issues - this could be fixed by manually entering the symbol and moving the transform point - saving and opening then worked.
I could not however do that step with code (well I could but it didnt fix the issue)
Am Going to look for other thisng that might help - adding a new layer - or something that will force flash to realise that things have changed.
But this is definately a flash bug - when everything looks and works fine but the reverts to something else after a save and reopen - suggests a much larger bug with saving.

DVD drive issue and permissions repair

Forgive me if I'm combining two issues in this posting. If they are not related I can separate them out.
I don't know if my drive is going, but I have a DVD for a tv show that I wanted to watch on my Macbook Pro running Snow Leopard (latest patches). For a while now I've had to keep reinserting the disc because it's not registering. I put it in, and can hear mechanisms, then it spits it back out.
I watched one disc, ejected it then tried to play another and it just would not load.
I thought of checking disk permissions, thinking maybe the OS had some permissions problems that may be preventing it from reliably reading the disc. The disk utility reported a number of permissions errors and owner errors, so I repaired the permissions and it reported that it was completed successfully. I thought I'd run the verify permissions again, just to make sure the errors had really been repaired, and they're still there - some of them were gone, but there were others reported. I ran the repair and verify a number of times now and nothing's changed.
My questions:
1. Could the problem I'm seeing with my DVD drive be related to permissions of some of the system files?
2. Do I have anything to worry about with the disk permissions not appearing to be repaired?
3. Would I gain anything by booting to install media and running the verify and repair from there?
Thanks much in advance!

Could the problem I'm seeing with my DVD drive be related to permissions of some of the system files?
If you've repaired permissions, and you still have the problem, then the answer is no.
Do I have anything to worry about with the disk permissions not appearing to be repaired?
Mac OS X: Disk Utility's Repair Disk Permissions messages that you can safely ignore
Would I gain anything by booting to install media and running the verify and repair from there?
No.

Posting of Goods Issue for a Delivery (Different movement types)

Hello SD Experts,
We have this process wherein we use Deliveries w/o reference. There's a customization in place for this process, the movement type is determined through the item category of the material.
Given this scenario, my question is if it is possible to process the goods issue of a delivery with multiple item which require different movement types (diffrent items and item categories thus it have different movement types)?
Thank you for your kind consideration.

Hello,
Yes, you can.
As you know LO is std delv doc for delv w/o reference.
And I cat determination for that LO delv doc are
Delv Type __ I Cat Group __ Usage __ High I Cat __ Def I Cat __ Man I Cat __ Man I Cat
LO _____________________TEXT ______________ DLTX
LO ________DIEN____________________________ DLX _______DLX
LO ________LEER___________________________ DLN
LO ________LEER________________DLNG_______DLNZ
LO ________LEIS_____________________________DLX_______DLX
LO________ NLAG____________________________ DLX
LO________NORM____________________________DLN
LO________NORM________CHSP_______________DLN
LO________NORM________CHSP____KLN________KLN
LO________NORM________CHSP____TANN______TANN
LO________NORM________PACK_______________DLN________DLX________DLP
LO________VERP____________________________DLN
LO________VERP_________PACK_______________HUPM______DLN
LO ________VOLL____________________________ DLNG
LO ________ WERT____________________________ DLW
Corresponding maintain movement type in Schedule line cat (Tcode VOV6) & determination that in TCode VOV5.
If you want diff movement type then create your own 'Z' Sch line cat with you desired Movement type (Tcode VOV6) and determine the Sch line Cat accordingly in TCoDe VOV5.
Thanks & Regards
JP

Issue with Return Delivery for movement type 262

Hi,
I have got a strange issue, the user is trying to do a MIGO Return Delivery for a material document using movement type 262, this he claims has been doing it for many materials. However when i go to the MKPF table i see the transaction Code field to be MIGO_GI for all the material documents for which he claims to have done return delivery. But under this transaction code we have only 4 options - Display, Issue, Cancel and Remove from storage.
Now when he tries to do the return delivery for movement type 262 he get an error message "Check table T156N: entry RL 262 does not exist" , but this has been very well maintained in the table.
Can you please let me know -
If it is possible to do a return delivery for a movement type 262?
If yes how to address the above error encountered.
Thanks in advance
Sachin

Hi Sachin,
If you think of return delivery to vendor with or w/o PO reference you can use movement types 161, 122, 124 as default settings.
Movement type 261 means withdrawal against production order and its reverse is MVT 262. The latter can be used e.g. via MB1A (or you can make storno of a confirmation by 261).
Are you sure your user is using the correct terminology ('return delivery')? Please check the material documents he/she claims to have booked as return delivery. (in MB51 you can get a list of all material movements of MVT 261 that belong to 'your user' and after that you can open the material document and check through which transaction the booking was made.)
BR
Csaba

Auto print of Goods Issue/Transfer Posting Documents by Movement type

Hi,
We have created two different output types to print the layout's of Goods Issue/Transfer Posting Documents.
The requirement is to default the message in the document by movement type (key combination)
Meaning if it is 201 it should populate GI output type
If it is 313 it should populate TP output type.
we do not have any standard key combination (NACR) by movement type wise.
Any alternative way of meeting this requirement?
Thanks
Regards
Ram

Hello Kevin,
I donu2019t think it is necessary to use a user exit to keep the Material B (that is transferred from Material A) in the same bin.
This can be controlled in the customizing: indicator Post to same bin, that can be set in the WM Movement type (V_T333-KZUAP) and in the Storage type (V_T3010-KZUAP).
Now I donu2019t know your business process but I am surprised that Material B requires more space than Material A since it is u2018bornu2019 by means of a transfer posting and not a production or packing step that makes it bigger in terms of capacity required.
A workaround for this could be to transfer (LT10) Material A first to a separate Storage type (with the Post to same bin-flag set) that has no Capacity check and after the 309 posting transfer it back into the warehouse with LT10.
Success and thanks beforehand for any credits!
Kind regards,
Bart

Goods Issue Stock To Asset Via Movement Type 241

Hello SAP friends,
I have a requirement that requires the material purchased into the plant storage location as stock qty. Following that the material will be issued out from the storage location to asset via movement type 241 using the moving average price. When doing a reversal, i.e movement type 242, the material will be returned as stock from asset. We will be using the NetBook value to capture the cost. Question is how to clear off the cost in the GL account as by using movement type 242 as it will debit GL Account and credit FA? Appreciate your feedbacks with regards to this.

are you passing batch number to the BAPI?
if not try pass the batch number the rest of the things bapi will take care of.
bi

Java issue with permissions repair

Hello.
I know of the list of issues that I can safely ignore when repairing permissions. However, recently I've had issues with Java on Safari and when I repair permissions, I get this:
Repairing permissions for “Chad's Drive”
Permissions differ on "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Classes/jconsole.ja r", should be lrwxr-xr-x , they are lrw-r--r-- .
Repaired "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Classes/jconsole.ja r".
User differs on "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home/lib", should be 0, user is 95.
Repaired "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home/lib".
User differs on "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Libraries", should be 0, user is 95.
Repaired "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Libraries".
Permissions differ on "System/Library/Java/Support/Deploy.bundle/Contents/Resources/JavaPluginCocoa.b undle/Contents/Resources/Java/deploy.jar", should be lrwxr-xr-x , they are lrw-r--r-- .
Repaired "System/Library/Java/Support/Deploy.bundle/Contents/Resources/JavaPluginCocoa.b undle/Contents/Resources/Java/deploy.jar".
Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Classes/jconsole.jar ", should be -rw-r--r-- , they are lrwxr-xr-x .
Repaired "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Classes/jconsole.jar ".
User differs on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Home/lib", should be 95, user is 0.
Repaired "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Home/lib".
User differs on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Libraries", should be 95, user is 0.
Repaired "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Libraries".
Warning: SUID file "System/Library/PrivateFrameworks/Admin.framework/Versions/A/Resources/readconf ig" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/Admin.framework/Versions/A/Resources/writecon fig" has been modified and will not be repaired.
Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Resources/JavaPlugin Cocoa.bundle/Contents/Resources/Java/deploy.jar", should be -rw-r--r-- , they are lrwxr-xr-x .
Repaired "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Resources/JavaPlugin Cocoa.bundle/Contents/Resources/Java/deploy.jar".
Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Resources/JavaPlugin Cocoa.bundle/Contents/Resources/Java/libdeploy.jnilib", should be -rwxr-xr-x , they are lrwxr-xr-x .
Repaired "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Resources/JavaPlugin Cocoa.bundle/Contents/Resources/Java/libdeploy.jnilib".
Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired.
Permissions repair complete
This is a tad bit more text than I am used to, and am wondering about the console.jar and "Virtual Machines" as I"ve not seen these before. Any ideas? Anything I should worry about?
Oh, Java test site says Java is working fine and is the most recent version.

I´m also for a week now with a big problem in Mail - hundreds of messages got blank and disappeared after "rebuild", now it won´t even synchronize. I put this in a thread in the Mail forum, but solutions only go as far as backups - which I don´t have. It started after installing the last Java patch and it still the same after updating to 10.6.5 and permission repair (which shows:
Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired.
to sum up: Sent mails are lost, received mails before certain dates (few days back in 1 account, years back in another and no trouble in the third one) won´t get downloaded again, even with new setup of the account - and all started after the java patch.
Help is very appreciated (maybe I can restore my sent mails from somewhere?!)
Dani.

Urgent mm issues road permit regis. & prod. move.analysis

Similar Messages

Maybe you are looking for