URGENT MOD HELP
hi can one of the mods please help my infinity has been cancelled when i took out a new contract, what i need help with is my father has a emergency line for his care on the network, i have contacted bt and spent over 3 hours in total trying to get somewhere but no one will help me! i can explain the full story if you could contact me?
mark
Solved!
Go to Solution.
I have asked a moderator to provide assistance, they will post an invite on this thread. As the phone line has been lost, then this board will be more appropiate, as the Infinity should come back, once the phone has been fixed.
Have you reported the phone fault?
They are the only BT employees on this forum.
Once you get a reply, if you click on their name, you will see a screen like this. Click on the link as shown below.
Please do not send them a personal message, as they may not be on duty for a long time, and your message will not be tracked properly.
For your own security, do not post any personal details, on this forum. That includes any tracking number you are give.
They will respond either by phone or e-mail within 5-6 working days.
Please use the tracked e-mail, to reply, not via the forum. Thanks
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.
Similar Messages
-
URGENT Mod Help needed please. Hacked account and ...
Please help. My sons account has been hacked and live porn was sent to all his friends along with files that we don't know what is inside.
We have informed the police because of the porn content but now the hacker is hacking my sons friends and demanding to speak to my son.
Please helpExcellent first response.
Have your son change his account password immediately if not already done.
Also have him change the password of the registered e-mail address on file as a proactive measure.
The police know how to contact Skype directly with an official request for assistance if required.
Hackers typically gain access to peoples' accounts - Skype and otherwise - via password crackers or other password-guessing techniques.
Run security scans and software updates on your son's computer - run your preferred anti-virus/malware/spyware program using the latest virus signature files available in case your son inadvertently downloaded malware which is allowing the hacker access to the computer.
If anything else seems amiss or awary, contact a local computer professional for further assistance.
Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often! -
hi guys urgent please help me ASAP my ipod touch 4g reboots/restarts over and over again and i cant enter DFU mode cause my home button is stuck/broken please help guys i cant enter itunes too cause it said it needs my passcode the problem is i cant even enter my passcode in my ipod touch cause its rebooting over and over again help please guys
- See if this program will place it in recovery mode since that erases the iPod and bypasses the passocode.
RecBoot: Easy Way to Put iPhone into Recovery Mode
- Next try letting the battery fully drain. The try again. -
Date format Problem in OAF R12 Urgent Please help!!!
We have acustom application in OAF which was developed in 11i. Now we migrated the same to R12.
In this there are two date fileds getting dispayed on the page and the query for the same is
SELECT TO_CHAR (SYSDATE, 'dd-mm-yyyy') AS CURRENT_DATE, UPPER (TO_CHAR (SYSDATE - 10, 'mon-yy')) AS g_period, UPPER (TO_CHAR (SYSDATE + 5, 'mon-yy')) AS gnext_period, TO_CHAR (sysdate,'dd-mon-yyyy') as today_date, TO_CHAR (sysdate - 1,'dd-mon-yyyy') as yesterday_date FROM DUAL
In 11i version the output is dispaying correctly but in R12 the current date is dispayed as
Start Date 04-Nov-5242
End Date 04-Nov-5241
As per logic it should be
Start Date 09-Feb-2012
End Date 10-Feb-2012
Please help..Urgent issue.Here are the answers to your problems :
1. Once u restart , the oracle services and the database is not mounting automatically.That is because, when you install the Oracle Oracle8i Standard Edition Release (8.1.7), the two key services namely
OracleOraHome81TNSListner and
OracleService<your SID name>
are configured as manual start ( check the NT --> start>setting>control panel>services. )
For the database to start automatically the next time you start your machine, these two services will have to be put into "Automatic Start" mode.
< for this double click on the respective service, select the "Automatic" radio button and click on ok>.
Now when you restart the machine, your database will be automatically mounted.
2. this as explained above is a corollory to the above problem. you can start or stop your database on NT using the "Services" window....
hope this helps.
bye.
Hi All,
I have installed Oracle Oracle8i Standard Edition Release (8.1.7) from technet site.
I have installed it on windows NT 4.0 .
Installation is fine.
I can access or get into SQL prompt .
I have created a database also.
1st problem
My problem is once I restart the Machine and try to access SQL plus .it gives me an error
ORA-01034: Oracle not available
ORA-27101: shared memory realm does not exist.
2nd problem
I dont know how to start and stop the database , as there is nothing to do that in the start menu of Oracle .
How do i do this .
This is very urgent please help.
regards,
Preeti -
Kernel panics, message saying "You need to restart your computer.Hold down the Power..." I am in the middle of HSC very URGENT please help!! Mac keeps needing to restart!!
I looked in console and its saying that it may be because of Sophos Anti-Virus, i deleted and uninstalled all traces of Sophos but looked in console and this is some of the lines coming up:
26/09/13 10:11:17.945 PM com.apple.launchd: (com.sophos.intercheck[6460]) posix_spawn("/Library/Sophos Anti-Virus/InterCheck.app/Contents/MacOS/InterCheck", ...): No such file or directory
26/09/13 10:11:17.945 PM com.apple.launchd: (com.sophos.autoupdate[6461]) posix_spawn("/Library/Sophos Anti-Virus/SophosAutoUpdate.app/Contents/MacOS/SophosAutoUpdate", ...): No such file or directory
26/09/13 10:11:17.945 PM com.apple.launchd: (com.sophos.notification[6462]) posix_spawn("/Library/Sophos Anti-Virus/SophosAntiVirus.app/Contents/MacOS/SophosAntiVirus", ...): No such file or directory
26/09/13 10:11:17.946 PM com.apple.launchd: (com.sophos.intercheck[6460]) Exited with code: 1
26/09/13 10:11:17.946 PM com.apple.launchd: (com.sophos.intercheck) Throttling respawn: Will start in 10 seconds
26/09/13 10:11:17.946 PM com.apple.launchd: (com.sophos.autoupdate[6461]) Exited with code: 1
26/09/13 10:11:17.946 PM com.apple.launchd: (com.sophos.autoupdate) Throttling respawn: Will start in 10 seconds
26/09/13 10:11:17.946 PM com.apple.launchd: (com.sophos.notification[6462]) Exited with code: 1
26/09/13 10:11:17.946 PM com.apple.launchd: (com.sophos.notification) Throttling respawn: Will start in 10 seconds
26/09/13 10:11:18.291 PM Safari: self <TabContentView: 0x7f8d5dd1aa50>
26/09/13 10:11:22.617 PM Safari: self <TabContentView: 0x7f8d5db7bb00>
26/09/13 10:11:27.866 PM Safari: self <TabContentView: 0x7f8d5c331a70>
26/09/13 10:12:19.939 PM com.apple.launchd.peruser.501: (com.sophos.uiserver[6487]) posix_spawn("/Library/Sophos Anti-Virus/SophosUIServer.app/Contents/MacOS/SophosUIServer", ...): No such file or directory
26/09/13 10:12:19.939 PM com.apple.launchd.peruser.501: (com.sophos.uiserver[6487]) Exited with code: 1
26/09/13 10:12:19.939 PM com.apple.launchd.peruser.501: (com.sophos.uiserver) Throttling respawn: Will start in 10 seconds"
Looked all over computer and cant find anything of Sophos please help very urgent!That was all that there was in the most recent one, how long do you think it could take to fix?
Here is the second most recent:
Wed Sep 25 15:39:39 2013
panic(cpu 0 caller 0xffffff80002c4794): Kernel trap at 0xffffff7f81757965, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0xffffff81acc397fe, CR3: 0x000000001e2b5025, CR4: 0x00000000000606e0
RAX: 0x000000001d31a000, RBX: 0x0000000000000000, RCX: 0x0000000000000000, RDX: 0x0000000000000000
RSP: 0xffffff80b0dbb710, RBP: 0xffffff80b0dbb820, RSI: 0x0000000000000000, RDI: 0x0000000000000001
R8: 0x000000000000000a, R9: 0x0000000000000378, R10: 0x0000000000000128, R11: 0x0000000000000378
R12: 0xffffff800c626400, R13: 0x0000000000000000, R14: 0x0000000000000000, R15: 0xffffff81acc39802
RFL: 0x0000000000010246, RIP: 0xffffff7f81757965, CS: 0x0000000000000008, SS: 0x0000000000000010
CR2: 0xffffff81acc397fe, Error code: 0x0000000000000000, Faulting CPU: 0x0
Backtrace (CPU 0), Frame : Return Address
0xffffff80b0dbb3c0 : 0xffffff8000220792
0xffffff80b0dbb440 : 0xffffff80002c4794
0xffffff80b0dbb5f0 : 0xffffff80002da55d
0xffffff80b0dbb610 : 0xffffff7f81757965
0xffffff80b0dbb820 : 0xffffff7f817667a0
0xffffff80b0dbb840 : 0xffffff7f8173a58e
0xffffff80b0dbb870 : 0xffffff7f8177fb6f
0xffffff80b0dbb8a0 : 0xffffff7f81779632
0xffffff80b0dbb8d0 : 0xffffff7f8177d7d5
0xffffff80b0dbb900 : 0xffffff7f8177c6db
0xffffff80b0dbb9e0 : 0xffffff7f817412b8
0xffffff80b0dbba10 : 0xffffff7f81778684
0xffffff80b0dbba30 : 0xffffff7f817449ce
0xffffff80b0dbbb60 : 0xffffff7f81741a4c
0xffffff80b0dbbbc0 : 0xffffff8000655f3e
0xffffff80b0dbbbe0 : 0xffffff800065681a
0xffffff80b0dbbc40 : 0xffffff8000656fbb
0xffffff80b0dbbd80 : 0xffffff80002a3f08
0xffffff80b0dbbe80 : 0xffffff8000223096
0xffffff80b0dbbeb0 : 0xffffff80002148a9
0xffffff80b0dbbf10 : 0xffffff800021bbd8
0xffffff80b0dbbf70 : 0xffffff80002aef10
0xffffff80b0dbbfb0 : 0xffffff80002daec3
Kernel Extensions in backtrace:
com.apple.driver.AppleIntelHD3000Graphics(7.3.2)[A2328231-E577-32FF-B20F-D08BDC FE9C51]@0xffffff7f81738000->0xffffff7f8179bfff
dependency: com.apple.iokit.IOPCIFamily(2.7)[5C23D598-58B2-3204-BC03-BC3C0F00BD32]@0xffffff 7f80889000
dependency: com.apple.iokit.IONDRVSupport(2.3.4)[7C8672C4-8B0D-3CCF-A79A-23C62E90F895]@0xff ffff7f80d2e000
dependency: com.apple.iokit.IOGraphicsFamily(2.3.4)[D0A1F6BD-E66E-3DD8-9913-A3AB8746F422]@0 xffffff7f80cf5000
BSD process name corresponding to current thread: WindowServer
Mac OS version:
11G63b
Kernel version:
Darwin Kernel Version 11.4.2: Thu Aug 23 16:25:48 PDT 2012; root:xnu-1699.32.7~1/RELEASE_X86_64
Kernel UUID: FF3BB088-60A4-349C-92EA-CA649C698CE5
System model name: MacBookPro8,1 (Mac-94245B3640C91C81)
System uptime in nanoseconds: 1866666823698
last loaded kext at 480357661446: com.apple.filesystems.smbfs 1.7.2 (addr 0xffffff7f80795000, size 241664)
last unloaded kext at 303348424187: com.apple.driver.AppleUSBUHCI 5.1.0 (addr 0xffffff7f80af7000, size 65536)
loaded kexts:
com.sophos.kext.sav 8.0.14
org.virtualbox.kext.VBoxNetAdp 4.2.16
org.virtualbox.kext.VBoxNetFlt 4.2.16
org.virtualbox.kext.VBoxUSB 4.2.16
org.virtualbox.kext.VBoxDrv 4.2.16
com.logmein.driver.LogMeInSoundDriver 1.0.2
com.Greatdy.driver.SystemAudioCapture 1.0.0
com.apple.filesystems.smbfs 1.7.2
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.driver.AppleMikeyHIDDriver 122
com.apple.iokit.IOBluetoothSerialManager 4.0.8f17
com.apple.driver.AudioAUUC 1.59
com.apple.driver.AppleHDA 2.2.5a5
com.apple.driver.AppleMikeyDriver 2.2.5a5
com.apple.driver.AGPM 100.12.75
com.apple.driver.AppleUpstreamUserClient 3.5.9
com.apple.driver.SMCMotionSensor 3.0.2d6
com.apple.driver.AppleSMCPDRC 5.0.0d8
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AudioIPCDriver 1.2.3
com.apple.driver.AppleSMCLMU 2.0.1d2
com.apple.driver.ApplePolicyControl 3.1.33
com.apple.driver.ACPI_SMC_PlatformPlugin 5.0.0d8
com.apple.driver.AppleIntelHD3000Graphics 7.3.2
com.apple.driver.AppleBacklight 170.2.2
com.apple.driver.AppleLPC 1.6.0
com.apple.driver.AppleMCCSControl 1.0.33
com.apple.filesystems.autofs 3.0
com.apple.driver.AppleUSBTCButtons 227.6
com.apple.driver.BroadcomUSBBluetoothHCIController 4.0.8f17
com.apple.driver.AppleUSBTCKeyboard 227.6
com.apple.driver.AppleIRController 312
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 33
com.apple.iokit.SCSITaskUserClient 3.2.1
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCISerialATAPI 2.0.3
com.apple.iokit.IOAHCIBlockStorage 2.1.0
com.apple.driver.AppleUSBHub 5.1.0
com.apple.driver.AppleFWOHCI 4.9.0
com.apple.driver.AirPort.Brcm4331 561.7.22
com.apple.driver.AppleSDXC 1.2.2
com.apple.iokit.AppleBCM5701Ethernet 3.2.4b8
com.apple.driver.AppleEFINVRAM 1.6.1
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleAHCIPort 2.3.1
com.apple.driver.AppleUSBEHCI 5.1.0
com.apple.driver.AppleACPIButtons 1.5
com.apple.driver.AppleRTC 1.5
com.apple.driver.AppleHPET 1.7
com.apple.driver.AppleSMBIOS 1.9
com.apple.driver.AppleACPIEC 1.5
com.apple.driver.AppleAPIC 1.6
com.apple.driver.AppleIntelCPUPowerManagementClient 195.0.0
com.apple.nke.applicationfirewall 3.2.30
com.apple.security.quarantine 1.4
com.apple.security.TMSafetyNet 8
com.apple.driver.AppleIntelCPUPowerManagement 195.0.0
com.apple.iokit.IOSerialFamily 10.0.5
com.apple.driver.DspFuncLib 2.2.5a5
com.apple.iokit.IOSurface 80.0.2
com.apple.iokit.IOFireWireIP 2.2.5
com.apple.driver.AppleHDAController 2.2.5a5
com.apple.iokit.IOHDAFamily 2.2.5a5
com.apple.iokit.IOAudioFamily 1.8.6fc18
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.AppleGraphicsControl 3.1.33
com.apple.driver.AppleSMC 3.1.3d10
com.apple.driver.IOPlatformPluginLegacy 5.0.0d8
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.driver.IOPlatformPluginFamily 5.1.1d6
com.apple.iokit.IONDRVSupport 2.3.4
com.apple.driver.AppleSMBusController 1.0.10d0
com.apple.driver.AppleIntelSNBGraphicsFB 7.3.2
com.apple.iokit.IOGraphicsFamily 2.3.4
com.apple.kext.triggers 1.0
com.apple.driver.AppleUSBBluetoothHCIController 4.0.8f17
com.apple.iokit.IOBluetoothFamily 4.0.8f17
com.apple.driver.AppleThunderboltDPInAdapter 1.8.5
com.apple.driver.AppleThunderboltDPAdapterFamily 1.8.5
com.apple.driver.AppleThunderboltPCIDownAdapter 1.2.5
com.apple.driver.AppleUSBMultitouch 230.5
com.apple.iokit.IOUSBHIDDriver 5.0.0
com.apple.driver.AppleUSBMergeNub 5.1.0
com.apple.driver.AppleUSBComposite 5.0.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.2.1
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOSCSIArchitectureModelFamily 3.2.1
com.apple.driver.AppleThunderboltNHI 1.6.0
com.apple.iokit.IOThunderboltFamily 2.0.3
com.apple.iokit.IOUSBUserClient 5.0.0
com.apple.iokit.IOFireWireFamily 4.4.8
com.apple.iokit.IO80211Family 420.3
com.apple.iokit.IOEthernetAVBController 1.0.1b1
com.apple.iokit.IONetworkingFamily 2.1
com.apple.iokit.IOAHCIFamily 2.0.8
com.apple.iokit.IOUSBFamily 5.1.0
com.apple.driver.AppleEFIRuntime 1.6.1
com.apple.iokit.IOHIDFamily 1.7.1
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 177.11
com.apple.kext.AppleMatch 1.0.0d1
com.apple.driver.DiskImages 331.7
com.apple.iokit.IOStorageFamily 1.7.2
com.apple.driver.AppleKeyStore 28.18
com.apple.driver.AppleACPIPlatform 1.5
com.apple.iokit.IOPCIFamily 2.7
com.apple.iokit.IOACPIFamily 1.4 -
PowerPC G5 iMac only booting up in Safe-mode - Help!
In July of 2005, I purchased my PowerPC G5 20" iMac, 2.0GHz, +260 GB harddrive and 2 GB of DDR SDRAM. It has been running so great that I even upgraded to Leopard OS 10.5.6 in June of 2011.
However in Nov. 2011, the computer would freeze upon start-up, and I would have to hold the power button to shut it down. After waiting a minute I would start it up and the OS came up ok. But each week I had to shut it down and restart a few times before it booted up ok. I ran the OS Disk Utility to repair permissions and it did not seem to make a difference. I also ran MacTuneUp 3.6.0 (purchased it in 2010), and there was also no difference.
Now I can ONLY boot into Safe-mode - Help!!!Discovered something new!
I left my iPhone connected to the iMac, and when starting up the computer the iPhone started charging. When the screen froze (light blue shade, not black screen), the iPhone stopped charging. (no charge?).
BTW....my mouse always moves when in frozen state.
I also tried starting up (c-key) using OS 10.5.6 CD and computer also froze in light-blue screen. The computer tried to access the CD but then gave up. After leaving the computer for awhile the screen power saving mode was on (screen was black). When I moved the mouse the screen changed from black to light-blue screen. Boot CD did not work. No keyboard commands work. Only holding the power button will shut down the computer.
Help!! -
Urgent please help, this program should work
Urgent please help.
I need to solve or I will be in big trouble.
This program works at my home computer which is not networked.
The hard disk was put onto another computer at another location whihc is networked. Here my program worked on Monday 14 october but since for the last two days it is not working without me changing any code. Why do I receive this error message???
Error: 500
Location: /myJSPs/jsp/portal-project2/processviewfiles_dir.jsp
Internal Servlet Error:
javax.servlet.ServletException
at org.apache.jasper.runtime.PageContextImpl.handlePageException(PageContextImpl.java:460)
at jsp.portal_0002dproject2.processviewfiles_dir_1._jspService(processviewfiles_dir_1.java:162)
at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:119)
at javax.servlet.http.HttpServlet.service(HttpServlet.java)
at org.apache.tomcat.facade.ServletHandler.doService(ServletHandler.java:574)
at org.apache.tomcat.core.Handler.invoke(Handler.java:322)
at org.apache.tomcat.core.Handler.service(Handler.java:235)
at org.apache.tomcat.facade.ServletHandler.service(ServletHandler.java:485)
at org.apache.tomcat.core.ContextManager.internalService(ContextManager.java:917)
at org.apache.tomcat.core.ContextManager.service(ContextManager.java:833)
at org.apache.tomcat.modules.server.Http10Interceptor.processConnection(Http10Interceptor.java:176)
at org.apache.tomcat.util.net.TcpWorkerThread.runIt(PoolTcpEndpoint.java:494)
at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:516)
at java.lang.Thread.run(Thread.java:536)
Root cause:
java.lang.NullPointerException
at jsp.portal_0002dproject2.processviewfiles_dir_1._jspService(processviewfiles_dir_1.java:132)
at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:119)
at javax.servlet.http.HttpServlet.service(HttpServlet.java)
at org.apache.tomcat.facade.ServletHandler.doService(ServletHandler.java:574)
at org.apache.tomcat.core.Handler.invoke(Handler.java:322)
at org.apache.tomcat.core.Handler.service(Handler.java:235)
at org.apache.tomcat.facade.ServletHandler.service(ServletHandler.java:485)
at org.apache.tomcat.core.ContextManager.internalService(ContextManager.java:917)
at org.apache.tomcat.core.ContextManager.service(ContextManager.java:833)
at org.apache.tomcat.modules.server.Http10Interceptor.processConnection(Http10Interceptor.java:176)
at org.apache.tomcat.util.net.TcpWorkerThread.runIt(PoolTcpEndpoint.java:494)
at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:516)
at java.lang.Thread.run(Thread.java:536)foolishmatt,
The code is quit large.
to understand the program I think all the code needs to be examined.
I would need to send to you in an email.
Here is my e-mail
[email protected]
if you contact me than I can send the code to you.
Thank you in advance. -
Urgent, Please help me in this problem.I am getting problem while installation
I am using Windows 8 in my system. I am trying to install Sql Server in system . Everything is fine, but finally when i click on install button i am getting the following error .
please help me quickly. I well be thankful to you.Triple post meanwhile:
http://social.msdn.microsoft.com/Forums/en-US/7fafa499-ca1e-42f7-a117-73df924d9847/urgent-please-help-me-in-this-problemi-am-getting-problem-while-installation?forum=sqlsetupandupgrade
http://social.msdn.microsoft.com/Forums/en-US/a1c7978c-2f84-495f-a8b6-9e9fe46654d7/getting-problem-while-installing-sql-server-2012?forum=sqlsetupandupgrade
Olaf Helper
[ Blog] [ Xing] [ MVP] -
How to install adapters in pi 7.0 ex(tibco adapter) its urgent plz help
hi friends
can any one help me how to insatlll the tibco adapter in pi 7.0 its urgent plz help
thanks in advance
bye
rajaHi Raj,
Is your Sender System Tibco If so Use JMS Adapter to get the Data from tibco and Use IDOC Adapter to Post in R3. For this you no need to Install any Adapter in XI System.
Similar discussions ,
XI integration with Tibco
XI Integration with Tibco EMS (Using JMS Adapter)
Regards
Agasthuri Doss -
Hi!!
I urgently need help with this:
When I compile this in Flex Builder 3 it says: The element type 'mx:Application' must be terminated by the matching end-tag '</mx:Application>'.
but I have this end tag in my file, but when I try to switch from source view to desgin view it says, that: >/mx:Script> expected to terminate element at line 71, this is right at the end of the .mxml file. I have actionscript(.as) file for scripting data.
This is the mxml code to terminate apllication tag which I did as you can see:
MXML code:
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml" layout="absolute" backgroundGradientAlphas="[1.0, 1.0]" backgroundGradientColors="[#007200, #000200]" width="1024" height="768" applicationComplete="popolni_vse()">
<mx:HTTPService id="bazaMME" url="lokalnabaza/baza_MME_svn.xml" showBusyCursor="true" resultFormat="e4x"/>
<mx:Script source="dajzaj.as"/>
<mx:states>
<mx:State name="Galerije">
<mx:SetProperty target="{panel1}" name="title" value="Galerije MME"/>
<mx:SetProperty target="{panel2}" name="title" value="opis slik"/>
<mx:SetProperty target="{panel3}" name="title" value="Opis Galerije"/>
<mx:AddChild relativeTo="{panel1}" position="lastChild">
<mx:HorizontalList x="0" y="22" width="713.09863" height="157.39436" id="ListaslikGalerije"></mx:HorizontalList>
</mx:AddChild>
<mx:SetProperty target="{text1}" name="text" value="MME opisi galerij "/>
<mx:AddChild relativeTo="{panel1}" position="lastChild">
<mx:Label x="217" y="346" text="labela za test" id="izbr"/>
</mx:AddChild>
<mx:SetProperty target="{label1}" name="text" value="26. November 2009@08:06"/>
<mx:SetProperty target="{label1}" name="x" value="845"/>
<mx:SetProperty target="{label1}" name="width" value="169"/>
<mx:SetProperty target="{Gale}" name="text" value="plac za Galerije"/>
</mx:State>
<mx:State name="Projekti"/>
</mx:states>
<mx:MenuBar id="MMEMenu" labelField="@label" showRoot="true" fillAlphas="[1.0, 1.0]" fillColors="[#043D01, #000000]" color="#9EE499" x="8" y="24"
itemClick="dajVsebino(event)" width="1006.1268" height="21.90141">
<mx:XMLList id="MMEmenuModel">
<menuitem label="O nas">
<menuitem label="reference podjetja" name="refMME" type="check" groupName="one"/>
<menuitem label="reference direktor" name="refdir" type="check" groupName="one"/>
<menuitem label="Kontakt" name="podatMME" groupName="one" />
<menuitem label="Kje smo" name="lokaMME" type="check" groupName="one" />
</menuitem>
<menuitem type="separator"/>
<menuitem label="Galerija">
<menuitem label="Slovenija" name="galSvn" type="check" groupName="one"/>
<menuitem label="Nemčija" name="galDeu" type="check" groupName="one" />
</menuitem>
<menuitem type="separator"/>
<menuitem label="projekti">
<menuitem label="Slovenija" name="projSvn" type="check" groupName="one"/>
<menuitem label="Nemčija" name="projDeu" type="check" groupName="one" />
<menuitem label="Madžarska" name="projHun" type="check" groupName="one"/>
</menuitem>
</mx:XMLList>
</mx:MenuBar>
<mx:Label x="845" y="10" text="25. November 2009@08:21" color="#FFFFFF" width="169" height="18.02817" id="label1"/>
<mx:Label x="746" y="10" text="zadnja posodobitev:" color="#FFFFFF"/>
<mx:Panel x="9" y="57" width="743.02814" height="688.4507" layout="absolute" title="Plac za Vsebino" id="panel1">
<mx:Text x="0" y="-0.1" text="MME vsebina" width="722.95776" height="648.4507" id="Gale"/>
</mx:Panel>
<mx:Label x="197.25" y="748.45" color="#FFFFFF" text="Copyright © 2009 MME d.o.o." fontSize="12" width="228.73239" height="20"/>
<mx:Label x="463.35" y="748.45" text="izdelava spletnih strani: FACTUM d.o.o." color="#FBFDFD" fontSize="12" width="287.60565" height="20"/>
<mx:Panel x="759" y="53" width="250" height="705.07043" layout="absolute" title="Plac za hitre novice" id="panel3">
<mx:Text x="0" y="0" text="MME novice" width="230" height="665.07043" id="text1"/>
<mx:Panel x="-10" y="325.35" width="250" height="336.61972" layout="absolute" title="začasna panela" color="#000203" themeColor="#4BA247" cornerRadius="10" backgroundColor="#4B9539" id="panel2">
<mx:Label x="145" y="53" text="vrednost" id="spremmen"/>
<mx:Label x="125" y="78" text="Label"/>
<mx:Label x="125" y="103" text="Label"/>
<mx:Label x="0" y="53" text="spremenljivka iz Menuja:"/>
<mx:Label x="45" y="78" text="Label"/>
<mx:Label x="45" y="103" text="Label"/>
</mx:Panel>
</mx:Panel>
<mx:Label x="9.9" y="10" text="plac za naslov MME vsebine" id="MMEnaslov" color="#040000"/>
</mx:states></mx:Application>I know it's been a while but… did you fix this?
It looks to me like you are terminating the <mx:Application> tag at the top. The opening tag should end like this: resultFormat="e4x">, not resultFormat="e4x"/> (Remove the /).
Carlos -
Encrypting and Decrypting Data(Its Very Urgent, Please Help.)
Hi,
Can anyone tell me some idea in the below mentioned details.
Iam creating a Function for Encrypting and Decrypting Data Values using
DBMS_OBFUSCATION_TOOLKIT with UTL_RAW.CAST_TO_RAW by using
Key Value as normal.
But the problem, is it possible to have the key value more than 8.
Its showing me error when i give the key value less than 8 or more than 8.
Can u tell me why it happens, is that the limit of the key value or is any other way to do that.
Its Very Urgent, Please Help.
Thanks,
Murali.VIs this what you're looking for?
Usage Notes
If the input data or key given to the DES3DECRYPT procedure is empty, then the procedure raises the error ORA-28231 "Invalid input to Obfuscation toolkit."
If the input data given to the DES3DECRYPT procedure is not a multiple of 8 bytes, the procedure raises the error ORA-28232 "Invalid input size for Obfuscation toolkit." ORA-28233 is NOT applicable for the DES3DECRYPT function.
If the key length is missing or is less than 8 bytes, then the procedure raises the error ORA-28234 "Key length too short." Note that if larger keys are used, extra bytes are ignored. So a 9-byte key will not generate an exception.
C. -
Sec. Edu Cess not Flowing in MIGO - Urgent Pls help
Dear Friends
We have created a IMPORT PO,
Invoice verification is done with all necessary cess and duties which flown.
with the MIRO document and year, when we do MIGO, i am able to see duty, cess but secondary edu.cess is not flowing.
I tried to enter it manually also, but it is not accepting (field is open).
I have checked the settings.
The similar kind of PO, before it had been done, MIRO done, MIGO also done with proper flow of all values. But for this particular PO only problem existing.
Only difference between the two PO is problematic PO is with account assignment category Q.
Pls treat this urgent and help me in solving the same friends.
regards
PanneerFor Imports, condition type for SECess is <b>J1CV,</b> you have to maintain this condition type in Excise Defaults of CIN Customization.
Note - You cannot use any other condition type for SECess for Imports other than J1CV.
Cheers..
Santosh.D
<i>Reward Points if Helpfull</i> -
Urgent! Help!!! A bug(?) in Dialog.
Now I know why everyone writes urgent and help in the subject. It makes you feel really good.
Anyhow, I searched the forums (honestly!) but found nothing about this particular conundrum.
When I create a Dialog (the awt kind), it doesn't work as expected graphicswise.
If I create just a simple Dialog and setVisible() it, it isn't drawn correctly until I move the mouse pointer over it. I.e. the borders are drawn, but the Dialog isn't filled, so you see what was on the screen under it. When I move the mouse over it it paints it and then works correctly. If I add components to the dialog, some component behaves this way. So if I add a Button to a Panel, and then add the Panel to the Dialog, the button and the frame are drawn correctly, but the Panel is not. Again when I move the mouse over it, it draws OK. The funny thing is, that when I add a whole bunch of stuff to the Dialog, it's the last added Panel that bugs. A workaround is to create a 1x1 Canvas and add that to the Dialog, but this seems to be a bug.
Maybe I'll switch to Swing after I get rid of this bug.And since you don't know the answer or probably just don't care, why not make this an underground off-topic thread? I don't really care about Dialogs anyway.
Man...I have a job interview tomorrow. I'll have to make up some stories tonight.
I wonder if they'd be interested in my Dialog problem? Might be worth a try.
I guess I'll be fine, I'll just act natural...or maybe I shouldn't act natural. It could increase my chances. Well, if I get bored I can always play dead until they get annoyed and leave me alone. -
Set Page "HEIGHT" ---Very Urgent, Please Help me on this issue. Please.
Hi all ,
Very Urgent, Please Help me on this issue.
when_now_form trigger i set set maximize the window and MDI. And my window and canvas is same height (1500). The formsweb.cfg also changed to 1500. But still I can not view full page on web. Where to I change the properties. Please help.
SelvamIs your form running inside the browser window (with SeparateFrame=False)? If the browser is maximized, and your form is maximized, yet you cannot see the entire screen, you can run with SeparateFrame=True. You can do that on the browser line.
-
Urgently need help for parsing IP header
Hi, could anyone tell which class I should use to parsing the IP header of a packet?
Thanks many many times!> Hi, could anyone tell which class I should use to
parsing the IP header of a packet?
DatagramPacket?
> Urgently need help for parsing IP header
Don't flag your question as urgent, even if it is for you.
* We all answer questions here voluntarily, in our leisure time. We do that because doing so is fun for us, because we enjoy helping people and having interesting discussions. Guess what, it is much less fun if it gets stressful. So the last thing you want to do to get us to answer your question is to pass your stress over to us.
* People who are stressed and want a fast answer often don't even find the time to do the necessary research or to formulate their question in an easy to comprehend way. That's even less fun to work with. So you really don't want us to feel your stress. Instead you want to take your time to write a well formulated post that is fun to answer. The less likely it is for us to know that your question is urgent, the more likely you are to get a fast answer!
* The simple notion that you want your post to be answered faster than those of the other members might feel rather unfair to some of us. Doubly so because often "urgent" questions actually are homework questions. Yours might be different, but someone who had bad experiences with this type of question might not read far enough to notice.
Maybe you are looking for
-
When I open Firefox 4 from either the icon or from a link from e-mail or some other place, multiple windows open up. Usually between 15 and 25 of them. I'm running Windows 7 Ultimate on both my laptop and desktop and have the same issue with both. I
-
Pavilion dv7t-4100 CTO Select Edition Entertainment Notebook PC hard disk failure imminent.
Lately this laptop has been running slow and hot. Just yesterday, I recieved an error message on my laptop (HP Pavilion dv7t-4100 CTO), saying "SMART Hard Disk Error" followed by a message telling me that the SMART hard disk check has detected an im
-
HP Photosmart C4480 through Time Capsule
I have a Vista machine and my wife has a Macbook Pro she just got. We both wanted to share a wireless printer so the guy at the apple store suggested we get the Time Capsule and the HP Photosmart (actually we got the 100 off printer deal so we got th
-
Install Windows 7 natively on 2nd MacMini drive?
I have a 2 drive MacMini SL server which is running plain ol' SL. I want to install Windows on the second drive and not through bootcamp. Can I just go into Disk Utility, erase and reformat the 2nd drive at MS-DOS, and then copy all my files that w
-
Dual Monitors with GPU and Motherboard not working
Hey guys, just wondering if anyone else could help me out. So, I decided to hook up an old monitor of mine to my rig today and, lo and behold, the monitor isn't being detected by my computer. I've already got a monitor running through my GPU (NVidia