URGENT : Need changes to Current design

Hi
I am having an issue in the current design which should be changed accordingly.
The objective is to make the current design capable of  taking loads from multiple files for different P’s data.
Current design does not have this capability. The constraint with current design is all the 3 p’s data must be present in one file.  It cannot be distributed over several files (i.e one file containing data for P1, P2. another file for P3 and so on).
The system must be flexible to allow all the data to loaded in one go, or for the file to loaded in different segments (e.g. loading 1of the 3Ps, and then loading the remaining 2 Ps at a later date). This will allow us to cater for data coming from different sources working to a different timetable, but still having the ability to load the data and making this available for reporting.
The new development will require that transfer structure ,transfer rules and update rules be set up for each P for loading from flat file data source
The structure of the pesent design is ODS->ODS->Infocube.
Could any one please give me an idea how to make the issue to be sloved.
Thanks In Advance.
Regards
KKumar

Hi,
Can anyone suggest me an idea.
Regards
KKumar

Similar Messages

  • LOVE Firefox! I have just launched a website. One designer told me it takes 7-10 days for any changes to appear. Why? I have cleared caches and cookies etc. I need to be more responsive than 7-1o days. I need changes to appear within 24hrs.

    LOVE Firefox! I have just launched a website: www.animalhealingandhumans.com. My web designer told me it takes 7-10 days for any changes to appear. Why? I have cleared caches and cookies etc. I need to be more responsive than 7-1o days. I need changes to appear within 24hrs. How can I achieve a much better response time to good feedback?

    Hello binbingogoABC,
    Shopping on BestBuy.com should be easy and fun and not fraught with the kind of trouble that you describe. I regret very much that this has been your experience.
    Using the information you provided when you signed up for Best Buy Unboxed I was able to locate your cancelled orders. I have requested more information from my back-office partners. As soon as I have additional details about your situation, I will reply again to this message. In the interim, I'm sorry that I must impose upon your patience.
    I'm very grateful that you wrote to us with your concerns.
    Sincerely,

  • I need to change my current location in my apple ID but i am asked to finish my balance first .. Just 16 cents and its not enough to purchase any item from the app store .. What should i do ?

    Help .. I need to change my current location in my apple ID but i am asked to finish my balance first .. Just 16 cents and its not enough to purchase any item from the app store .. What should i do ?

    You can try contacting iTunes support via this page and ask if they can remove the balance : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

  • My apple id email address is no longer valid. my current email address is recognised as my rescue email...i need to cancel old, change my current and add a new recue email...cant seem to be able too

    my apple id email address is no longer valid. my current email address is recognised as my rescue email...i need to cancel old, change my current and add a new recue email...cant seem to be able too

    How are you trying to do it ? You can change the rescue email address on your account by, from http://support.apple.com/kb/HT5312 :
    Navigate to appleid.apple.com using your web browser.
    Click "Manage your account"
    When prompted, sign in using your Apple ID and password.
    Click Password & Security
    You'll be asked to answer 2 of your 3 security questions before you can make any modifications. If you are unable to remember your answers, you can choose to send an email to your rescue email to reset your security questions.
    After you've validated your identity by correctly answering your security questions, click Edit to the right of your rescue email address.
    Once you've finished editing your rescue email address, click the Save button directly below the email field.
    You can then try using your current rescue email address as your primary email address - you may need to log out of that page and back in. Or you can then try changing the primary email address via the Store > View Account menu option on your computer's iTunes
    If you have an iPhone, iPad and/or iPod Touch you may then need to log out of your account on them by tapping on it in Settings > iTunes & App Store and log back in for the account to be 'refreshed' on it.

  • HT204406 Cancelation of my active iTunes Match subscription is not working and I urgently need to change my region.

    I have temporary relocated to the USA from the UK and I urgently need to change my region settings.  I have spent my remaining iTunes balance and cancel my auto renew to iTunes Match (as asked to do on my account page) but it isn't allowing me to change region.  The message that I have an active iTunes Match account keeps appearing. WHY?!?!?!

    Yes. They wouldn't say it if it wasn't true. System requirements are stated on the iPhone box and Apple website.
    Other alternative is to activate the phone on someone else's newer Mac OS X, but you'll still need iTunes to sync, backup, install etc.

  • HT4967 "In the ICLOUD section of iCal" - I don't have this on my Mac iCal. How would I get it? I currently have an empty iCal on iCloud. I urgently need to back up my iCal, Could anyone help please? This is SO frustrating.

    Sorry. This is where my question should be....
    "In the ICLOUD section of iCal" - I don't have this on my Mac iCal. How would I get it? I currently have an empty iCal on iCloud. I urgently need to back up my iCal, Could anyone help please? This is SO frustrating.

    Have you enabled iCloud syncing for calendars on your mac, which requires OS X Lion (10.7.2)? See http://www.apple.com/icloud/setup/mac.html.

  • Urgently need to de-fragment entire production DB

    I would like to try something but need to check first if it is going to work.
    We urgently need to reorganize/defrag our production database server but cannot get sufficient down time. The Oracle version we are using is 8.1.7.4, running on HP-UX 11 unix operating system.
    However I had a thought. I currently have a spare machine with sufficient RAM, CPU and disk capacity to restore the Production Database server on to. Then I could simply do a de-frag (ie export/import) of the entire DB on the restored system, leaving the Production DB server operational. Once de-fragged the restored system could be brought up to date by manually applying copies of the archived redo logs off the real Production database server. The final step would involve restoring the de-fragged system back on to the actual Production Database server. Hope this makes sense.
    Can anyone confirm if this is going to work?
    If this will not work can anyone suggest how I could completely de-frag my production database server, without upgrading the Oracle version or buying any additional software, possibly making use of the spare machine I have?
    Many thanks
    Khalil

    If you need to defrag now, then without some kind of plan to change the way that you organize tablesand indexes you're going to have to defrag in the future.
    Avoiding fragmentation is simple -- you assign tables and indexes to tablespaces based on their size, and you ensure that every segment within each tablespace is the same size. You do this by always setting pctincrease to zero, and always setting initial = next.
    In your case you can defragment segment by segment by creating new tablespaces based on extent sizes of 64kb, 1Mb, and 16Mb (for example), and over a number of small downtimes you can ...
    ALTER TABLE MY_TABLE MOVE TABLESPACE MB16_01 INITIAL 1024kb NEXT 1024kB PCTINCREASE 0;
    -- for each index on MY_TABLE ...
    ALTER INDEX MY_INDEX_01 REBUILD TABLESPACE KB64_01 INITIAL 64kb NEXT 64KB PCTINCREASE 0;
    ALTER INDEX MY_INDEX_02 REBUILD TABLESPACE KB64_01 INITIAL 64kb NEXT 64KB PCTINCREASE 0;Thoughts, anyone?

  • How to change default Current Flag values for SCD2?

    I'd be curious to find out how to change default Current Flag values for SCD2 (instead of 0/1 to use N/Y)
    Probably I can change IKM module .... is there another way?
    Thanks

    Hi,
    You need change the IKM. This values are hardcode in the IKM.
    You can create a new IKM and the values used are a options of the IKM.
    Regards
    Edited by: Uthred on May 18, 2009 4:27 PM

  • I downloaded a music software and then deleted it. It changed my homepage designation and I can't get it to change back to Firefox. I do know how to change this but it is not working. Can you help?

    The music software is imesh and I have changed my homepage designation with Firefox, in my internet options for Windows. Every time I close the page, the homepage changes back to imesh search page. I have deleted imesh from my computer including going to windows explorer and deleting all imesh that I can find to no avail.

    Steps to remove iMesh as your homepage:<BR>
    # In the address bar, type '''about:config''' and press Enter.
    # In the '''Filter''' textbox at the top, type: '''keyword.URL'''
    # You will be presented with the entry for keyword.URL
    # Double-click on it, delete the string and press OK.
    # Exit from Firefox.
    Next, you need to set the desired website as your homepage. Open Firefox and follow the instructions given in this article: [[How to set the home page]].

  • How to know and change  the current memory settingf of a libray ?

    Hi
    is anybody know how to change the current quota setting of a library or workspace with content services api.
    and how will we change the same.
    i need to get current wuota settings of a library and need to change that settings..
    Thanks

    To determine existing quota settings, check out Attributes javadoc for
    QUOTA_ALLOCATED Quota allocated to the closest parent folder that has a QuotaConfiguration (could be the item itself, in the case of a Folder item).
    Available on: DOCUMENT , FOLDER
    Constant Field Value: QUOTA_ALLOCATED
    Data Type: Long
    QUOTA_CONSUMED Quota consumed by the subtree of the closest parent folder that has a QuotaConfiguration.
    Available on: DOCUMENT , FOLDER
    Constant Field Value: QUOTA_CONSUMED
    Data Type: Long
    Create an AttributeRequest[] for the above attributes on the appropriate item concerned.
    For example, to determine quota of my personal workspace :-
    FdkSession session = new FdkSession(....);
    SessionManager sM = Managers.getSessionManager(session);
    AttributeRequest ar1 = new AttributeRequest();
    ar1.setAttributeName(Attributes.PERSONAL_WORKSPACE);
    ar1.setRequestedAttributes(new AttributeRequest[]
    new AttributeRequest(Attributes.QUOTA_ALLOCATED,null),
    new AttributeRequest(Attributes.QUOTA_CONSUMED,null)
    AttributeRequest[] requestedAttributes = new AttributeRequest[] { ar1 };
    Item i = sM.getCurrentUser(requestedAttributes);
    log(i);
    In order to update quota of a Workspace (or potentially the domain), call
    QuotaManager.updateQuota method.
    Check out the javadoc for QuotaManager.
    cheers
    Matt.

  • How to change colors of designs

    I would love to be able to change colors of designs I make in Printshop. On my PC I could just highlight an object and choose a color and change it. The Mac is supposed to be the great "artistic" machine, yet it can't seem to do half the stuff my PC does and did for free. I was told to buy Photoshop which is hundreds of dollars. I don't need to do all that it offers, just need to change colors of a logo I've designed. Is there any way to do this on a Mac or do I need to go back to using my PC for graphic design projects?
    Annette

    You can't expect everything to be thrown in there, especially for free. Beyond the basics, pretty much anything else would have a personal preference aspect to it.
    GraphicConverter is one of the few commercial applications I have - definitely worth the money.
    For something free, there is also Gimp.

  • Urgent,need for code in bdc for co02

    hi all,
    im in urgent need of code for developing bdc tcode co02.
    Thanks for your help..

    1. Please record the transaction which you need to change the data in Co02 (Shop Order/Prod. Order)
    2. Create BDC program as normally you do it for normal BDC programs..
    Smaple Code with Recording.
    clear: bdcdata,messtab.
      perform bdc_dynpro using: 'SAPLCOKO1' '0110'.
      perform bdc_field using: 'CAUFVD-AUFNR' t_aufk-aufnr.
      perform bdc_field using: 'R62CLORD-FLG_OVIEW' 'X'.
      perform bdc_field using: 'BDC_OKCODE' '/00'.
      perform bdc_dynpro using: 'SAPLCOKO1' '0115'.
      perform bdc_field using: 'BDC_SUBSCR' 'SAPLCOKO1'.
      perform bdc_field using: 'BDC_OKCODE' '=KOWE'.
      perform bdc_dynpro using: 'SAPLCOKO1' '0115'.
      perform bdc_field using: 'BDC_SUBSCR' 'SAPLCOKO1'.
      perform bdc_field using: 'BDC_CURSOR' 'AFPOD-INSMK'.
       perform bdc_field using: 'AFPOD-INSMK' 'S'.
      perform bdc_field using: 'BDC_OKCODE' '=BU'.
      call transaction 'CO02' using bdcdata mode 'A'
                                            update 'S'
                                            messages into messtab.
    Thanks,

  • Purchase Order - I need change subject E-mail

    Hi All,
    When I create an e-mail trough the transaction code ME23N and I try to send the e-mail trough the transaction code ME9F the e-mail arrives with a default subject (PROGRAM NAME + CURRENT DATE), I need change the subject according the necessity of the project.
    Can someone help me, please ?
    Thanks a lot !!!

    Hi,
    Check out what Dhruba has suggested below first, but if the program has been set up to do this instead try the following
    Go to transaction OMFE and look down the list to see which program has been allocated to the Output type and medium that you are using (probably NEU and 5 or 7? if you are using the standard oputput condition types).
    Then get your ABAP programmer to check and change the code of that program.
    Steve B

  • Change encoding Adobe Designer

    How change the encoding of my form -XDP File-, for default is UTF-8, but I need change for other UTF-7
    Thanks for your help
    Juan Carlos S

    I don't think you can change the encoding of the XDP file itself - it's a standard XML file; why is it that you need it UTF-7 encoded?
    If you need to encode the text on the form, Designer can help you with that.
    SteveX
    Adobe Systems

  • Forms always marked as need update in Sharepoint designer 2010

    Some of the automatically generated task forms in Sharepoint designer are marked 'needs update', when I open them in Infopath I get the dialog that says:
    One or more fields in the workflow form have changed. InfoPath will now update the set of available fields. You may need to modify your form view to add or remove the updated fields.
    Making a change and publishing it gives a 'publish sucessful' confirmation dialog but the modified date on the form in Sharepoint designer doesn't update and is still marked as needing an update even after I refresh it. Closing and reopening it gives an updated
    modification date but the form is still marked as needing an update. What am I missing here?

    Hi ,
    I understand that some task forms in your workflow are marked ‘needs update ’even though you have published the changes in InfoPath designer . Can you have a test like this :Create a new workflow with the ‘Start Approval Process ’ action .Publish the workflow
    .Then open the task form in InfoPath designer to see whether the ‘need update’ message will show up .
    I have met this situation once ,after I restart SharePoint Designer and InfoPath .The problem solves .
    Thanks,
    Entan Ming
    Entan Ming
    TechNet Community Support

Maybe you are looking for