Urgent need for the creation of solution manager key please

Hello
Can i please ask you to create a solution manager key for me ?
i am stuck in my test installation of ECC6.
Here are my details :
       Instance name : sapdb1
       Instance number : 01
       Computer name : ap-hp1
Kind regards
Christophe

Hi Chris,
I understand the urgency. There are only two ways you can get a solution manager key. One by yourself. Otherwise, please create a message with SAP requesting a solution manager key temproarily. Unfortunately, even though we can create a solution manager key, it is not advisable to distribute the key in forums.
Hope this helps.
Thank you.

Similar Messages

I need a Solution Manager Key, please

Hello,
I'm running an HSC and need a solution manager key. Can anyone generate a key for me, please?
Hostname = FUJISAPD
System number = 01
Instance = R3Q
Thanks in advance.
Best Regards,
André Koji Honma
Support Analyst

Those keys MUST NOT be posted here.
Install a solution manager, you will need it because you won´t get any patches without it.
Markus

Needed urgent help for user creation in security manager in ODI 11g

Hi Gurus,
I have an urgent requirement in ODI security manager and i am completely helpless. We need specific steps for the user creation with sufficient priviledges. The detailed requirements are:
1. There is a group of users under the framework team and these users should be able to edit the Knowledge modules only. All other objects (e.g. projects, interface, procedures or development related objects) should only be in read only mode for them.
2. There is a group of users under the development team. The priviledges of these users should be mutually exclusive to that of the framework team users. i.e. the development team should be able to edit or delete all development related objects (e.g. projects, interface, proc etc.) but the knowledge modules should only be in read only mode for them.
Now I will explain what i have tried out:
I am working on ODI 11.1.1.5.
I have created a user with NG DESIGNER and CONNECT profile. Dragged and dropped all the projects on the user and selected all methods in all repositories (check sign). However when i connect with that user i cannot open the KMs (as far as development team is concerned its fine) but i can also not open interfaces as well as procedures (which is not acceptable from development point of view).
Also when i tried creating a user from the framework team point of view i could not see any option related to KMs (To give edit priviledge).
Please help me out guys. I have also searched oracle documentation and believe me the security manager section is not very good. If you guys can help me out with specific steps it would be great (I have tried the hints given in oracle documentation and they dont work, the ODI security manager behaves strangely :-(
Thanks in advance,
SB

Similar requirement here guys. Any pointers. I was able to achieve this by restricting development user from supervisor access. In that case the development user can not edit the interfaces. Any known defefct?

A realistic assessment of your experiences of hardware needed for the type of editing I do please.

Introduction:
I apologise for the length of this post but from experience of reading here, I'm working on the principle of the more I explain about myself now, the less anyone willing to help me will have to ask later.
I have lurked around this forum on and off for a few years, read the various threads in the FAQ section, particularly PPBM5 and What PC to build thread and other related topics around what system to build. I have found them very useful and in particular have enjoyed reading about Harm Millaard's experiences First Ideas for a new system. For about about 12 months I've been delaying upgrading my PC but in Mr Millard's latest updates on his PPBM6 site he talks about new systems and provides a link to Intel's time line which suggests they are in no rush to replace the i739xx series CPU chip - which has I believe amongst other things 2 cores disabled. Normally bitter experience has taught me not to rush out and buy the latest technology but let others "test" it first and then benefit from reduced prices as that model is replaced. However, it now seems like last years technology is going to remain as this years technology and probably the first 2 quarters at least of next year and, if anything, the price of the i739xx series is at best staying at it's existing launch price or even rising. So it's time to take the plunge for me and upgrade.
My current hardware for editing:
I started with Premier 6.5 after I bought it as part of a bundle with a Matrox RTX 10 card - one of the most temperamental pieces of hardware I've had the misfortune to work with. I later upgraded to Premiere Pro 1.5 and edited with that using a Pentium 4 2.6 (overclocked to 3.2), 3 hard drives (no raid) and 4G of memory. The video footage used was avi recorded using a Canon MVX 30i and Panasonic NVGS27 and now I've added the Casio Exilim EX -FC100 (mpeg format) and a Panasonic HDC S90 (AVCHD).
My PC coped with the editing I did with avi footage but couldn't handle AVCHD format and this convinced me to upgrade to Premiere Pro CS5.5. At the same time I switched to editing on a Dell XPS M1530 (Centrino duo chip) - I upped the memory to 4GB, put Windows 7 64 bit home edition on and replaced the existing hard drive with a faster one. In addition I use a SATA Quickport duo attached to my laptop via an eSATA card. However, either the Quickport, eSATA card or XPS is extremely temperamental - I never see two external hard drives, 50% of the time see 1 external drive or none at all - when that happens I edit around it doing things I can with just the one internal drive - but this problem is not my question.
The type of editing i do:
I know people usually say around here not to try editing on laptops and believe me, I understand why, but using this setup I have been able to edit lots of videos - see here for examples of the type of editing I currently do:
http://www.youtube.com/user/PathfinderPro
The equipment test videos place the biggest strain on the hardware when editing. And, to do this editing I have to convert my AVCHD footage in to it's YouTube format before editing and even after I've done that it can be tediously slow to edit and playback even with premiere set to play at 1/4 normal quality. To convert the AVCHD footage to the YouTube format I edit in has to be done over many nights.
Now I am not a professional, I typically edit with up to 4 tracks of video with additional tracks for titles and my target audience is YouTube - which is why I can get away without editing in my prefered option of native AVCHD video format. However, I'm tired of all the waiting, stuttering, and many many days and hours of converting videos into a format I can use so I'm looking to upgrade. My problem is though I'm uncertain what path to take. The PPBM results are dominated by overclocked chips, and whilst the motherboard make and model is listed, the hard disks used, graphic card makes and models and memory modules are not. This is not a criticism of the PPMB tables (big thank you to Bill Gehrke & Harm Millaard for taking the time and effort to pull this much information together) but for me, I am not interested in being in the top 1000 in the world, nor overclocking like mad, and having had horror experiences of using matrox products and compatibility and stability issues with other hardware I'm more interested in compatability and practicality than speed when deciding what to build. I've also read the threads about marvel controllers, dual and quad channel memory support, the pro's and cons of SSD or standard drives, raid setups, the heat problems with overclocking the newer ivy bridge chips and general build advice etc so I'm not coming here without having done some reading first.
The type of system I'm thinking of:
So far based on what I've read here, I've come to the conclusion - but I'm open to suggestion:
- Chip - regrettably due to the cost and unlikely successor anytime soon - a 39xx (with appropriate cooler) because I want to edit in native AVCHD which seems to require the warrior type chip as opposed to the "economical" build regardless of what my target audience is and this suggests
- X79 motherboard (which must have an old PCI slot such as the Asus Sabertooth and which has room for the cooler I'm considering). As I will be carrying over my old terretec DMX 6 fire 24/96 soundcard - all my videos have their audio mastered in Audition using this card - best piece of advice I read was the audience will watch a bad video with good sound editing but not the other way round)
- 4 hard drives plus additional hard drive for operating system using onboard raid controllers (not sure whether the operating system drive will be WD caviar black or SSD and can't justify cost of external raid controller for either my type of use or number of hard drives being used)
- Video card - I can now buy a GTX 580 for less than the 670 - so not sure on the card especially based on Harm Millards observations that memory bandwith seems to be as important as CUDA cores
- Case - I have an Akasa 62 case with room for 5 hard drives - I won't be exceeding that, and if I overclock it will only be by a little so is it really necessary to replace it for a Tower Case - although I would prefer a case with a front connection for esata so I may have to change the case regardless
- Maximum memory 32G - so is it necessary to upgrade to windows 7 professional?
- Power source - I'll work out when I've decided on my components.
Help please:
For me it's video source/dictated software chosen and hardware/audience(youtube) dictates format edited in. As I don't intend to change my camcorders format (AVCHD or mpeg) in the next couple of years and I'm not interested in having the "fastest" system around what I'm really interested in learning is:
what system setups people use now for doing similar editing to me
what make/models of the component parts in your system work well together
and if you do have a bottle neck in terms of hardware, where is it and what hardware would you change to (not a dream model change, just a practical and realistic one)
I have deliberately not given a budget for the changes I'm intending because budget should not be the deciding factor in determining what I "need" to upgrade to for the "type of editing I do" - especially bearing in mind I've got by so far (admitedly at a tortoise pace) with by todays standards a standard spec laptop. Basically I don't want a Rolls Royce to go shopping at Wallmart but I'm tired of walking there and carrying everything back by hand!
Thank you very much for any help / experiences people can share.

Thank you both for your prompt and helpful replies.
Mr Millaard, regarding your excellent article Planning and Building an NLE system, I have read it a couple of times now and it was your article which finally convinced me the time was now to upgrade but within it you said for good reason "Initial choice of CPU: i7-39xx with the intention to overclock to 4.6 - 4.8 GHz", hence my uncertainty about the CPU to use. I have seen a video you posted here - I think it was based on your cats (which I incidently enjoyed) so working on the editing done there (but not remembering if you mentioned what video format you used) and others who have mentioned many pro's for the i7-39xx I was leaning towards that - but I'm financially relieved at least - if the i3770 will do, although now with the possible recommendation by JEShort01 (sorry not sure of the forum etiquette for use of names) of the 2600K overclocked I'm a little bit back in the position of which is more suitable especially with the update to the i3770 being nearer than i7-39xx. This still makes me lean towards the i7-39xx.
Regarding the editing, the match play you can see on the channel is indeed 1 camera basic edits - multiple titles used to provide the score board. However, the coaching videos use mulitple cameras - 3 to 4 sometimes (another reason for upgrading to CS5.5 for the multi cam editing support) and the equipment testing video can use 3 or 4 tracks layered on top of each other other with each track having opacity settings and multiple motion effects and titles with occasional keying video effects added. For example this video at approx 2 mins 50 and 5 mins 10 seconds.
http://www.youtube.com/watch?v=T1E5T7xo57c&list=PL577F7AB5E31FC5E9&index=13&feature=plpp_v ideo
Monitor wise I use dual monitor setup. My laptop screen and I link out to an LG M2394 D for widescreen and I sometimes use an old Neovo F-419 for 3 / 4 editing. I won't be using more monitors than 2. If the 580 drops a bit more I'll probably go for that - although I'll have to make sure it's size isn't an issue for the motherboard combo setup. Interestingly there is a thread shown on the forum home page which discusses the 570 vs the 660ti and the opinion was go with the 660ti which surprised me a bit.
Windows 7 professional it is then - I should have known that too - apologises for asking a question already asked.
"Accepted, your correct criticism of the lacking hardware info on the PPBM5 website. That is the overriding reason that for the new site http://ppbm7.com/ we want to use Piriform Speccy .xml results to gather more, more accurate and more detailed hardware info."
No criticism intended Mr Millaard - more an observation and I really look forward to that evolution with PPBM7. I'm assuming the .xml results will use pre populated drop down lists people can select their hardware from - that way you can control and ensure consistent entries - downside being the work required by you to populate the lists in the first place and maintain them.
Thanks again for your help but I'm still unsure a bit about the CPU and video card though.

Solution Manager Key info for Migration

Hi Guru's,
As we are planning to migrate / system copy all systems like SAP Portal , BI & XI to a new hardware, from P5-P590 to P6-P570 (The OS version, TL level and Patch Level for the both LPAR's remains same, i.e No change on OS versions).
My question here is:
We have generated a solution manager key for all systems while installation, if we migrate any SAP system to a new hardware i.e. P6-P570, will the solution manager keys work in new environment for all systems? Our Solution manager server is also on P5-P590 environment.
As we are planning to migrate solman server also to a new env (P6-P570) from P5-P590, if the solmanger key doesnu2019t work on new env, do we need to migrate the solman server first to a new env and generate a new solman key and assign the key to the migrated systems on new env.
Note: We are doing as is migration, i.e. hostname, SID & IP remains same.
I hope my question is clear and understandable.
Please provide your valuable inputs / suggestions for the migration and also provide any link for the migrations.
Points will be awarded for each valuable answer.
Regards
Sreedhar Gunda

Hi,
If your operating system is Unix ( any flavour ) then you can create the same mount points on new hardware ( except rootvg - operating system ) and copy entire contents from old hardware's mount points to new one. You need to take care of users , groups like ORA<SID>, and <SID>ADM , DBA, SAPSYS etc. In that scenario your hardware key will change so you need to apply new license in marketplase.
Better to migrate rootvg from your existing OS if possible , in that scenartio you need not take care of OS users , groups etc.
Regards
Kulwinder Singh

The need for the option to purchase perpetual license of Production Bundle

My business has used Adobe products for 15 years. I am a big fan. But I wish to continue purchasing the Production Bundle line of products with perpetual licenses. I have no need for the Cloud. I also want to upgrade from my current version of CS6 as I have done in the past, for about $350. Month to month rental does not work for my business. I also dont feel paying $600 for the Cloud is appropriate since my standard yeaarly upgrades are usually $350. If you folks dont give me a choice I will have to end my use of Adobe software. Many other professionals feel the same way. Please give us an option for ownership. Otherwise you may find you have a mass exodus from folks that have happily purchased your product for years.

Hi Todd and 001andrew,
I was going through the discussion we were having in last 4-5 post in this thread and it made me reply to your query and concerns.
I think you are mixing up 2 things here "Adobe Creative Cloud" and "Adobe Marketing cloud". Creative cloud comes under Digital Media whereas Marketing cloud comes under Digital Marketing.
Adobe® Marketing Cloud gives you a complete set of analytics, social, advertising, targeting, and web experience management solutions and a real-time dashboard that brings together everything you need to know about your marketing campaigns. So you can get from data to insights to action, faster and smarter than ever.
You can explore more about Marketing cloud on the following link:
http://www.adobe.com/in/solutions/digital-marketing.html
On the other hand Creative cloud gives you a simple membership which gives you the entire collection of CS6 tools and more. be it print or Interested in websites and iPad apps or Ready to edit video? You can do it all. Plus, Creative Cloud members automatically get access to new products and exclusive updates as soon as they’re released. And, with cloud storage and the ability to sync to any device, your files are always right where you need them.
Adobe Creative Cloud is an ongoing membership that gives your team access to all the Adobe Creative Suite® 6 desktop applications, plus other tools and services including Adobe Muse, Adobe Acrobat XI and Adobe Photoshop Lightroom 4 software, Adobe Edge Tools & Services, and more. Creative Cloud also includes new Internet-based services* and enables the delivery of high-impact content experiences such as interactive websites and stunning digital magazines. By offering connectivity with Adobe Touch Apps†, headlined by Adobe Photoshop Touch, Creative Cloud enables a mobile workflow, from ideation to publishing, to bring the power of Adobe innovation to iPad devices and Android™ tablets. Creative Cloud gives you freedom to create, offering immediate and ongoing access to industry-defining tools and technologies, to serve a vibrant worldwide community of creative talent.
to know more about the creative cloud offering you can visit:
http://www.adobe.com/products/creativecloud/buying-guide.html
Hope this helps you to understand the concept.
Also on the point where you have mentioned that where Adobe's Quarter result indicate that "Deferred revenue grew by $80.5 million to a record $700.0 million. " This Mean that Adobe has invested a lot in new offerings which is a liability as of now and this will turn into regular revenue in the future financial results.
Just to make it easy to understand deferred revenue means that we have advance payments or unearned revenue, recorded on the Adobe's balance sheet as a liability, until the services have been rendered or products have been delivered. Deferred revenue is a liability because it refers to revenue that has not yet been earned, but represents products or services that are owed to the customer. As the product or service is delivered over time, it is recognized as revenue on the income statement.
Companies generally have sizable amounts of deferred revenues on their balance sheets, typically representing license fees and annual maintenance charges. Analysts study trends in deferred revenues of such companies for a better indication of their financial performance.
So yes it is a good indication for Adobe and promise a great results in future. And obvously we can do it only with our esteemed and respected customers coming along in this great journey for Adobe.
Cheers!!
Kapil Malik

How to create Rfc for EP system in Solution manager

Dear experts,
I am doing ChaRM configuration for my EP system ( java only).
I also configured CTS+ successfully but we want to integrate this with Chram in solman.
I have done all configuration according to standard doc for ChaRM.
But when creating project from solar_admin it is giving "   NO RFC for DEP system"
so please suggest me how to create RFC for java system in Solution manager.
thanks in advance
dhiraj

Hello,
You need to setup an ABAP communication client and system, that's done through the TMS settings:
For source system:
- CTC                                              1
- CTS_SYSTEM_TYPE                          JAVA (others for a MDM system)
- NON_ABAP_SYSTEM                          1
- COMMUNICATION_SYSTEM:              (SAPSID of the ABAP communication system (e.g. the domain controller))
- NON_ABAP_WBO_CLIENT                    (Client of the ABAP stack on which the Transport Organizer Web UI (CTS_BROWSER) is activated and will run.)
- WBO_GET_REQ_STRATEGY                 TAGGED
- WBO_REL_REQ_STRATEGY                 MANUAL
For quality and production Java system (target systems):
- CTC                                              1
- CTS_SYSTEM_TYPE                          JAVA (others for a MDM system)
- NON_ABAP_SYSTEM                         1
- COMMUNICATION_SYSTEM:                 (SAPSID of the ABAP communication system (e.g. the domain controller))
- DEPLOY_WEB_SERVICE                       CTSDEPLOY
- DEPLOY_DATA_SHARE:
When this is done correctly, you will see the fields ABAP communication system and client populated in SMSY.
When ChaRM needs to operate on the non ABAP systems, it will take the RFCs for the communication system and client.
Best regards,
Miguel Ariñ

Process for applying for Solution Manager Key?

I have to install a NW2004s system in a AIX Machine.
I understand that i need a solution manager key for installation. We dont have solution Manager installed in our Landscape. But i came to know that i can request for a solution manager key from SAP
Please let me know the website, process for applying for Solution Manager key

Balaji,
This is interesting, SAP is pushing customers to have solution Manager installed with features like Solution Manager Key, Maintainance Optimizer etc. It will get difficult for customers who do not have solution Manager running on their site.
You will have to create support message under the component XX-SER-SMKEY and request for solution manager key, provide them all the details of your system.
Cheers,
Nisch

Solution Manager Key for Java AS

I'm new to SAP Netweaver so maybe this question has been answered before.
I need to install SAP Netweaver AS Java for development/QA purposes. I understand that I need also Solution manager key for installation so I installed another Solution Manager System.
When I enter to Solution Manager http://<server>:50000 I get "System Landscape Directory is not accessible. Only local system can be administered". What does it mean? I remember I chose to create local SLD.
I saw also in couple of threads the following:
Just go to transaction SMSY transaction of solman and locate the system for which you need to generate Solman Key and just right clilck on that system...You will find the option of Generating Solution Manager Key....
I don't have such an option when I enter to Solution Manager.
Any suggestions?
Thanks,
Haim Beyhan

Hi,
For Solman key generation refer the link below, which has the screen shots.
http://www.saptechies.com/step-by-step-procedure-to-generate-solution-manager-key-smsy-solution-manager-40/
Regards,
Ravi

Solution Manager Key for EP '04 - EP 2004s

Well, we just started the upgrade of our EP '04 SP18 to EP 2004s ST11. However, the PREPARE is rejecting the Solution Manager Key (generated in SSM 3.2). We came across OSS Note 811923 which says:
For SAP ERP 2004 (SAP ECC 5.0), you require SAP Solution Manager 3.1 with Support Package 20, or SAP Solution Manager 3.2 with Support Package 4. You can also use SAP Solution Manager 4.0.
For products of SAP Business Suite 2005 (including SAP NetWeaver 2004s), you require at least SAP Solution Manager 4.0 with Support Package 9.
I guess we are hosed up until we upgrade our Sap Solution Manager system to 4.0. Does anyone know a work-around for this?
thanks in advance,
Steven McElwee, Duke University

Hi Steven,
Not sure of any workaround for it but you have a couple of options;
1) Install a new solution manager 4.0 as a temporary work around to get a valid key
2) Raise an OSS message to request support to assist you.
Solution manager is really now a required utility system for your core apps. Even after you have the migration key it is likely that post migration you will have issues that may require patches from the service market place. As of April 2nd this year you need solution manager (4.0) Diagnostics for this.
For these reasons I would urge you to move to Solution Manager 4.0 sooner rather than later.
Cheers
Dan

Required solution manager key For Download SAP-IDES

Hi All
I need a list of items to download and install SAP Solution Manager
Our IDES installation is not yet complete because of the required solution manager key.
Thank you,
Madhu Rao

I'm not sure what you mean with "I need a list" but the installation guide is available at the usual places:
http://service.sap.com/instguides
--> SAP Components
--> SAP Solution Manager
--> Release 7.0
Check the "Master Guide SAP Solution Manager 7.0" for an overview, which CDs/DVDs you need.
The installation guide itself is also available on that site.
SolMan 7.0 SR3 is not available on 32bit platforms.
Markus

Table for solution manager key in ecc

Hi all
can any please tell me "solution manager key" is stored in which table in ecc
Thanks & regards
Chaitanya

HI,
I dont think it will be stored some where, it seems to be just installationpre-requisites.
What is the need of tracking solution manager key ..Its more interesting for me!
Regards

To extract portal activity data from the portal into Solution manager.

HI all,
I need to extract the portal activity data from the portal into Solution Manager BI and then later on into the SAP BW in order to generate BEx reports on the portal activity data. I need to know about the configuartions that are needed to be done on the portal side and the solution manager side so as to get the data into SolMan from portal. Waiting for a response.
Thanks and regards,
Divya.

Hi
In solution manager you can do the analysis of the ADC data files (Portal activity reporting) as as part of the End-to-End Diagnostics (Portal Activity Reporting tab in the End-to-End Workload Analysis).
Will you see the Portal Activity Reporting tab under End-to-End Workload Analysis?
by default PAR in SAP Solution Manager 7.0 EHP1 is deactivated ,since we requires
some manual configuration of the Activity Data Collector.
please follow the attached config guide in the SAP note for configuration.
Jansi

Approval procedure for the creation of a new item

I would like to have an approval procedure for the creation of new items. In that when one gets added, it gets placed on hold immediately and an alert gets sent to a manager.
thx, Richard

The solution would be the combination of SBO_SP_TransactionNotification stored procedure allowing only for some authorized persons to add an item with not On Hold status, and an alert to the authorized persons.

How to check the messages in solution manager?

hai experts !
how to check the messages in solution manager?
in which transaction do we see them?

Hi Kiran,
From what I gather from your brief question, you are perhaps looking for CRM_DNO_MONITOR that would display all queries created from Satellite/SolMan system itself, as support messages.
If you are looking for Notifications underlying those messages, please look for DNOTIFWL.
For more specific answers, please provide more description of what you are looking for.
Trust this helps.
Regards,
Srini

Urgent need for the creation of solution manager key please

Similar Messages

Maybe you are looking for