Urgent need of assistance, MSI Z77A-G45 Thunderbolt Unknown problems

Recently I have built my first computer, a desktop with the MSI Z77A-G45 Thunderbolt motherboard, an Intel core I5 CPU and a NVIDIA Ge-Force GTX 650 TI Video Card, and a 850W PSU (way more than what is needed). The computer worked perfectly fine for about a week, I did not initially order a Disc Drive because I figured I could install windows with a flash drive (which apparently does not work) so I installed ubuntu for a while (irrelevant to the problem) I ordered the Disc Drive and when it came in I plugged it in and the computer would not turn on, so I spent a while trying to figure out why it did not turn on when the day before it worked fine, eventually after basically disconnecting almost everything and putting it back together it worked. But it had no signal to the monitor. I have no means of telling if it is a UEFI/BIOS problem, a video card problem, or a CPU problem. All 4 LED's for the CPU phase are constantly on, when before when the computer worked fine it would only have the first phase LED blink, so I believe it might possibly be a CPU problem, though the video card is what controls the output for monitors so it equally could be the problem. For the motherboard I tried just about everything to reset it, everything, except flashing the BIOS (which I don't want to try unless it is the only solution left) I tried to clear the CMOS, took the BIOS battery out and put it back in again. Please help!

I do not yet have access to another desktop in which to put my graphics card. I just tried reseating everything and still no signal to the monitor. The VGA port on my motherboard does not work, it never has for some reason, I did not get intel integrated graphics with my CPU, I am not sure if that is why the VGA does not work.

Similar Messages

  • Need help troubleshooting resets - Z77A-G45 Thunderbolt

    Mobo: MSI Z77A-G45 Thunderbolt
    BIOS: V10.4 / 20130305
    CPU: Intel Core i5-3570K Quad-Core Processor 3.4 GHz 4 Core LGA 1155 - BX80637I53570K
    Memory:  2x CORSAIR Vengeance 8GB 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) CMZ8GX3M1A1600C10
    Video: HIS HD6770 Radeon
    PSU: OCZ OCZ600MXSP
    Primary Drive: Corsair Force Series GT 90GB (6Gb/s) SSD (CSSD-F90GBGT-BK)
    OS: Windows 8
    Running stock, board is otherwise very stable (memtest and prime95 passed).
    About half the time, this board resets resuming from S3 sleep. I'm at a loss as to why. So far I've replaced the memory, switched PCIe slots, reflashed BIOS, set MB defaults, over/under volted CPU and Memory, and switched memory slots. In my current test, I've pulled the graphics card and am now running on the integrated GPU.
    My questions are:
    - if this holds, how do I determine if it's the card or the draw on the PSU (no other to test) from the card
    - anything else I should try before I purchase 2x the components (as I have already done for the memory)?
    Thanks!

    Quote from: xmad on 13-June-13, 05:05:47
    A4 is the latest full release.
    This is the latest bios.
    I just posted the change list from A4 ==> A53 here: >> BIOSes<<
    Memtest passed 2 cycles, installed BIOS fine. Will let you know if this provides any relief. Thanks.

  • MSI Z77A-G45 Thunderbolt - UNBOXED!!!

     
    Intel’s Thunderbolt Technology is seen usually in high-end motherboard models. But today MSI just released a more budget friendly Z77 motherboard with this feature in it.
    The “Z77A-G45 Thunderbolt” boasts features like Military Class III Components for quality and stability, OC Genie II which automatically boost your computer performance in seconds, Click BIOS II for easier and friendlier to use UEFI BIOS, THX TruStudio PRO which delivers the best audio experience, supports Nvidia SLI and AMD Crossefire multi-graphic configurations and lastly Thunderbolt which delivers 10/GBps of data and display transfers – in each direction, at the same time – using a single cable to connect devices in a daisy chain.
    Military Class III Components are seen around the CPU socket. These are the SFC and Solid Capacitors
    The layout of the board is pretty the same as any MSI Z77 SKU models they have to offer. VRM heatsinks comes with flat heatpipe for better heat dissipation and a larger heatsink for the south. 
    Three PCIEx16 slots for multi-graphic card configurations.  Single video card can run @ Gen3 x16 while if you are about to use two it will be @ Gen3 x8 x8 and lastly for three, it will be Gen3 x8 x4 x4.
    All of the ports are handled by the Intel chipset. Starting from the left, you have USB 3.0 then 4x SATA 3GB/s in black and in white are 2x SATA 6GB/s.
    The rear I/O Ports are pretty standard but with the additional of the Thunderbolt port which is located beneath the VGA port. The board also have SPDIF/Coaxial Ports for Digital Audio Output.
    Then you have the bundles in the package.

    Quote from: Bernhard on 29-October-12, 15:10:10
    Is there any testing report that will follow to show us what was achieved with this board ? i.e. your practical tests on using Thunderbolt vs USB3 ?
    Such a pity there is no PCI slot.
    Or a DVI connection.

  • MSI Z77A-G45 Thunderbolt display

    Hi ,
    I have 2 thunderbolt displays and want to connect them to PC which i dont buy yet. I decided to buy motherboard MSI 7z77a-g45 thunderbolt and processor with integrated video. So i planned to connect 1 monitor to other and from other to MSI motherboard. Will it works ? Or what i should to do?

    The MSI link to your board states: Quote
    At 10 Gbps, Thunderbolt™ technology delivers great responsiveness with data and display transfers—in each direction, at the same time—using a single cable to connect devices in a daisy chain.
    http://www.msi.com/product/mb/Z77AG45_Thunderbolt.html
    So yes, MSI states that the display transfer is possible.
    If you wish to confirm if your specific displays will work, then submit a question here to MSI http://us.msi.com/service/PreSaleForm/

  • MSI Z77A - G45 - CPU multiplier problem

    Hi,
    I recently bought this PC:
    Intel Core i5 3570 k
    MSI Z77A - G45 - with BIOS V 2.5
    Seasonic S12II-620 620W 
    Corsair Vengeance Low Profile White 8GB (2x4GB) DDR3 1600
    Amd HD 7850
    My problem is following:
    If I change CPU Ratio (multiplier), in standart mode to 40x and leave CPU core voltage auto, it cause instability, even if use Cpu core voltage 1.25 V for ratio 40x.
    But that's not all problem. I could understand, why I cant OC my CPU, but this instability is even if I change multiplier to 30x from default 34x and this makes me uncertain.
    Now I will describe you that instability...
    OK so, when I change ratio to 40x or 30x it doesn't matter, it runs to windows successfully but after using windows something about 3-6 hours pc turns off.
    I also  discovered second problem by coincidence. If I hit F11 (Boot menu) , when I am starting pc and I have set ratio 40x or 30x, I can choose what I want to boot only for 10 secs and after that PC restarts by itself....
    But if I set default 34x ratio I can choose what I want to boot forever and pc doesnt restart.
    I know that boot menu is not some test of stability but it is very strange... Why If I change multiplier, it doesnt matter, if it is higher or lower then default settings it just cause instability ? :-/
    Thanks for help.

    Quote from: xmad on 19-August-12, 07:02:15
    I was just saying that the beta caused a vga problem, latest release the f11 problem so try the release prior to that, but if you got it working don't touch it! lol
    Are you still using the beta bios?
    No clue, we are just users like you are, just keep checking the website. You should report the troubles you had with 2.4 to msi too.>>How to contact MSI.<<
    Yeah iťs working now. As I said, I wanted flash older Bios 2.4, so for sure I click on restore defualts in bios (for sure before flashing) in that 2.64 Bios version...
    PC restarts and my graphic card started working =)...
    So now I am running on that the latest Bios as you refered mi (2.64 beta).
    I am running some test of stability on @ 4 GHz with 1.070 V (IBT,Prime,memmaxx,linx,cinebench,occt,super pi, 3d mark) temps are 62 C max...
    So I guess it's ok now =)
    At the end I have one question :
     My Cpu is now running on 40 x ratio all the time, there is no some underoverlocking ratio (16x etc.) when it's in idle. I was thinking the Ivy Bridge overclocking is overclocking of turbo only...
    I know It's detail, because I have good temps even in idle with 40x ration (33-39 C) but i want to be assured if it is ok.
    EDIT:
    And btw I didnť have 2.4 bios flash on, I wanted put them on... But before flashing my 2.64 beta started working right with HD 7850 as is wrote upper.
    I had Bios 2.5 before 2.64

  • MOVED: MSI Z77A - G45 - CPU multiplier problem

    This topic has been moved to Overclocking, Undervolting.
    https://forum-en.msi.com/index.php?topic=161026.0

    Quote from: xmad on 19-August-12, 07:02:15
    I was just saying that the beta caused a vga problem, latest release the f11 problem so try the release prior to that, but if you got it working don't touch it! lol
    Are you still using the beta bios?
    No clue, we are just users like you are, just keep checking the website. You should report the troubles you had with 2.4 to msi too.>>How to contact MSI.<<
    Yeah iťs working now. As I said, I wanted flash older Bios 2.4, so for sure I click on restore defualts in bios (for sure before flashing) in that 2.64 Bios version...
    PC restarts and my graphic card started working =)...
    So now I am running on that the latest Bios as you refered mi (2.64 beta).
    I am running some test of stability on @ 4 GHz with 1.070 V (IBT,Prime,memmaxx,linx,cinebench,occt,super pi, 3d mark) temps are 62 C max...
    So I guess it's ok now =)
    At the end I have one question :
     My Cpu is now running on 40 x ratio all the time, there is no some underoverlocking ratio (16x etc.) when it's in idle. I was thinking the Ivy Bridge overclocking is overclocking of turbo only...
    I know It's detail, because I have good temps even in idle with 40x ration (33-39 C) but i want to be assured if it is ok.
    EDIT:
    And btw I didnť have 2.4 bios flash on, I wanted put them on... But before flashing my 2.64 beta started working right with HD 7850 as is wrote upper.
    I had Bios 2.5 before 2.64

  • MSI Z77A-G45 Boot Loop problem

    Hi,
    I recently built my computer 2-3 months ago. It worked fine until a couple days ago it started boot looping. It doesn't even get to BIOS. I think it's my motherboard gone bad. I switched CPU and memory with another computer and it works fine but when i put it in my computer it boot loops again. before i go through this whole warranty ordeal does anyone have any ideas i could try? Thanks!

    >>Posting Guide<< please list all the components in your system!
    Motherboard?
    CPU?
    RAM?
    GPU (if you have a dedicated graphics card)?
    PSU (Power Supply Unit - please list the +12v rail/s amperage rating/s on its data sheet)?
    what you have described is usually either a Bad Motherboard or a Inadequate/overstressed PSU! so the components list of what you used to build the system is Very important to determine what exactly has gone wrong.

  • Cyclical Reboot After Sleep - Z77A-G45 Thunderbolt

    Often times my computer will restart 3-4 times after resuming from S3 sleep. It is very stable otherwise (passed memtest and prime95). While recent, This is not my first build, but have not seen this particular issue before.
    Was hoping for some suggestions on where to start troubleshooting. I am running stock and nearly all default settings in BIOS. I assume this is a memory or possibly a CPU voltage issue, but not looking to re-invent the wheel if someone can point me in the right direction.
    Mobo: MSI Z77A-G45 Thunderbolt
    BIOS: V10.4 / 20130305
    CPU: Intel Core i5-3570K Quad-Core Processor 3.4 GHz 4 Core LGA 1155 - BX80637I53570K
    Memory:  CORSAIR Vengeance 8GB 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) CMZ8GX3M1A1600C10
    Video: HIS HD6770 Radeon
    PSU: OCZ OCZ600MXSP
    Primary Drive: Corsair Force Series GT 90GB (6Gb/s) SSD (CSSD-F90GBGT-BK)
    OS: Windows 8
    Any advice appreciated!

    Quote from: Froggy Gremlin on 10-June-13, 14:39:37
      This is usually covered in the user manual?
    Power Management Setup
    Sets system Power Management of EuP2013 and AC Power Loss behaviors. Press
    <Enter> to enter the sub-menu.
    EuP 2013 [Disabled]
    Enables or disables the system power consumption according to EuP2013
    regulation.
    [Enabled] Optimize the system power consumption according to EuP 2013
    regulation.
    [Disabled] Disables this function.
    Note: When enabled, the system will not support RTC wake up event functions.
    Oh, I read it, trust me. This did not explain why it was rebooting when coming out of S3 sleep.
    Unfortunately, it did not help -- I had another reset this morning. Going to mess with C1E and Intel C-States next to see if that eliminates it.

  • [Z77A-G45 ThunderBolt] Official and Beta BIos [E7752IMS.Axx]

    E7752IMS.A300
    -- Update CPU Micro Code.
    - Update onboard Realtek LAN PXE ROM.
    - Improved PCI-E display card compatibility.
    - Improved memory compatibility.
    This is the full release bios for this board with additional archive for flashing the ME extension.
    >>Use the MSI HQ Forum USB flasher<<
    Download the compressed archive to your desktop but do not decompress.
    Select option 1 of the forum flash tool and point the tool an the compressed archive then follow the direction. This will flash your bios and ME extension.
    Once complete you will need to download and re-install the latest version of the Intel Management Engine Drivers.
    <<Intel Downloads / Management Engine>>
    Please note that flashing this release occurs entirely at your own risk!

    E7752IMS.A4 ===>  E7752IMS.A52 [BETA BIOS]
       01.Fix WIN7 64 Bit UEFI OS S4 resume fail issue.
       02.Fix select BIOS Setup Discard Changes and Exit item after can't enter os issue.
       03.Add "Long Duration Power Limit","Short Duration Power Limit","Primary Plane Turbo Power Limit",
          "Secondary Plane Turbo Power Limit" range to 4096.
       04.Fix clear cmos after boot option priorities show error issue.
       05.Fixed build-in shell disappear issue when update FixedBootOrder13 module.
       06.Fix it will show error characters in Boot device priority after disable some boot options.
       07.Fixed OA30tool change OEMID & OEMTBLID failed when select boot to UEFI OS.
       08.Disable "Secure Boot"when "Windows 8 feature" set from "Enabled" to "Disabled"
           to patch some NV's graphics card capability issue.
       09.Fix some monitor hang B2 issue.
       10.Change French language error in the option "Load Overclocking Profile x".
            11.Limit Snapshot to be triggled just one time while system with multiple USB keyboards plug.
       12.Improve OC memory(2600Mhz+) capability for Intel 7 series project.
       13.Fix can't detect LSI 9270-8i RAID card.
       14.Fix LSI 9270-8i RAID card can be detected in BIOS when Windows 8 feature enabled,
          but the option has display garbled.   
       15.Fix GetVariable compatibility issue while enable Win 8 feature upon MahoBay codebase.
            16.Patch some memory user mannule set tcl=12 can't boot when dram frequency>2600MHz. 
       17.Update ME 8.1.40.1416.
       18.Modify the PCH Sata Aggressive LPM Support item default value.
       19.Update SMBIOS module ver 34.
    This is the full release bios for this board with additional archive for flashing the ME extension.
    >>Use the MSI HQ Forum USB flasher<<
    Download the compressed archive to your desktop but do not decompress.
    Select option 1 of the forum flash tool and point the tool an the compressed archive then follow the direction. This will flash your bios and ME extension.
    Once complete you will need to download and re-install the latest version of the Intel Management Engine Drivers.
    http://www.msi.com/product/mb/Z77A-G45-Thunderbolt.html#/?div=Driver&os=Win8%2064
    Please note that flashing this release occurs entirely at your own risk!

  • MSI Z77A-G45 and Samsung 840 Series weirdness

    Ok so here's the thing
    about a week ago i decided that it was time to build a new computer with a Z77A-G45 motherboard
    put it together, installed windows 7 64-bit and everything was working just fine - for about 5 days -
    but then one morning when i turned on my computer it decided not to boot and just sat there with fans running with an A2 code at the bottom left of the screen
    i tried taking out the ram leaving just 1 in and moving it to different slots and trying a different ram block boots thinking it might be faulty ram,
    when that didn't work i tried removing the graphics card and boot with just the onboard VGA, reset the CMOS jumper, and even replaced that battery on the motherboard thinking the shop might have shipped an almost dead one, took everything apart and booted it outside the case on a glass surface to make sure it wasn't some sort of short
    but the only time it actually wanted to get past the A2 code was when i booted with only 1 of my hard drives, so  i started changing my drives around using various combinations of SATA cables and ports (luckily had an extra 5 SATA cables lying around)
    eventually i narrowed it down to it wanting to boot with 2 of my 3 drives but the 3rd one (a Samsung 840 series 500 GB SSD, that has no system files or anything fancy other then music, movies and a few games at the moment) getting it stuck on the A2 code
    so i set it up as an external USB drive with a SATA/USB converter i had sitting around but then it would get stuck on B4 instead if i booted with the drive connected
    however everything would work just fine if i connected the drive after the system had booted up (or even just unplugging and replugging it when it got stuck on the B4)
    once back in windows with the drive connected i ran all the diagnostics i could think of but nothing showed anything wrong with it
    (and the only thing i had done with the drive before it stopped wanting to boot was to defrag it)
    eventually i decided to copy all the files from the drive to a different drive and reformat it as sort of a hail-mary
    and to my surprise that actually made it boot up just fine
    so i moved it back inside the case as a normal drive just to make sure it would still work (which it did) and then moved all the files back to see if any of them were the culprit - that turned out not to be the case however
    it booted up without complaint with all the original files on it
    so now my question is why?
    what the heck is going on?
    did defragging cause some sort of data fault that caused the bios to not be able to read the drive properly or did i just buy a haunted computer?
    like i said everything is back in the state it was the day before it didn't want to boot and bios and been defaulted so it's not really an issue at the moment but I'd still like to know what's going on so i can hopefully avoid it in the future
    any answers or comments will be appreciated
    for your reference a full parts list:
    Motherboard: MSI Z77A-G45
    Bios Version: 2.10
    Graphics card: Club3D GeForce GTX 550ti 2GB
    PSU: Corsair TX 950W - 100-240V ~ 12A 50/60Hz
    CPU: Intel Core i7 3770K / 3.5 GHz Processor (Stock boxed fan)
    RAM: Corsair Vengeance - 32 GB (4 x 8 GB) - DIMM 240-pin - DDR3 - 1600 MHz ( PC3-12800 )
    HDD: OCZ-Vertex2 128GB SSD (OS)
             Hitachi HDS722020ALA330 2TB HDD (Media/Backup)
             Samsung 840 Series 500GB SSD (Media/Backup)
    OS: Windows 7 64bit Ultimate

    This is strange
    I have Z77A-G43, and have exactly the same problem with one 1GB sata drive, that works just fine in every other PC.
    In my case PC run into restart loop, but with same code A2 as yours.
    Strangest part was PC was restarting even if I put HDD into PCI Sata/Raid card !?
    So I am guessing here its not a hardware problem, but a software (BIOS) problem.
    Now whole pc with Z77A-G43 is at Service because of faulty DVI output (not working).
    Will try reformating drive, but need first to buy >1gb hdd to backup that one
    Drive is currently working just fine in this 10y old MSI PC =.=
    It seams they have stopped making things as they used to, this old mb is one durrable dog.
    which was the main reason I went to same company when in question was mb...

  • Intel Core i5-3570K + MSI Z77A-G45 turbo OC @ 4.5GHZ Problem

    Hi Guys,
    Maybe you can help me out. I'm currently running turbo OC @ 4.4ghz stable. When I set the Turbo ratio to 45, i always fail the prime95 test or get bsod. Below is my hardware and bios settings:
    CPU: Intel Core i5-3570K
    COOLER: Thermalright Venomous-X
    MOBO: MSI Z77A-G45
    RAM: G.Skill Sniper F3-12800CL9D-8GBSR (4GBx2) CL 9-9-9-24-2N 1.5V XMP
    I followed most of the settings from xmad/Froggy Gremlin on this post - https://forum-en.msi.com/index.php?topic=164847.0. Any other settings I can tweak? Or do I need to go manual and set the vcore voltage to 1.3+?

    Quote from: pogiak on 23-January-13, 03:54:31
    Hi Guys,
    Maybe you can help me out. I'm currently running turbo OC @ 4.4ghz stable. When I set the Turbo ratio to 45, i always fail the prime95 test or get bsod. Below is my hardware and bios settings:
    CPU: Intel Core i5-3570K
    COOLER: Thermalright Venomous-X
    MOBO: MSI Z77A-G45
    RAM: G.Skill Sniper F3-12800CL9D-8GBSR (4GBx2) CL 9-9-9-24-2N 1.5V XMP
    I followed most of the settings from xmad/Froggy Gremlin on this post - https://forum-en.msi.com/index.php?topic=164847.0. Any other settings I can tweak? Or do I need to go manual and set the vcore voltage to 1.3+?
    Can you please send me your stable 4.4GHz OC profile for your Z77a-g45 + 3570K CPU configuration? I find it VERY dificult to go beyond 4.2 GHz stable. Thanks!
    - Noah

  • MSI Z77A-G45 RAID Issue

    Greetings...
    Just got a new MSI MoBo and wanted to RAID1 my two WD Caviar Black HDDs. However, everytime I enable RAID and reboot it goes to a black screen with two "Z"s randomly placed in the middle. Once I get to the "black screen", it will only boot to that screen afterwards and needs a CMOS reset to fix. I have tried everything I can think of, but always get the same results. I have successfully installed Windows 7 on one of the drives with AHCI mode enabled, and have also had IDE mode work fine... but as soon as I enable RAID - black screen.
    Everything else on the board seems to be fine. Anyone have any ideas?
    SYSTEM:
    MSI Z77A-G45 mobo
    Intel i5-3570 CPU
    Coolermaster Hyper 212+ EVO
    8GB Crucial DDR3-1600
    EVGA 560Ti 448 Core Classified (Primary)
    XFX 260GTX XXX Ed. (Physx)
    2 x WD Caviar Black Dual-Proc HDDs
    LG DVD Super-Multi Burner
    Silverstone Decathalon 850W PSU
    Windows 7 Home Premium 64-bit

    FIXED -  Ended up reflashing the BIOS, which restored the RAID utility. BTW, my G15 keyboard would not register the CTRL-I to get into the utility... I had to use a PS/2 keyboard, which required a CMOS reset in order to recognize. Just posting this in case anyone else runs into this.

  • MSI Z77a-G45 graphics driver issue.

    02-june-2013
    MSI Z77a-G45 graphics driver issue.
    Trying to install the graphics drivers for this board from the MSI site, I but every time I do so on loading windows 7 my monitor just goes to sleep and I have to roll back the driver in safe mode. This is the same for the driver found in the windows 7 updates.
    Iv downloaded the files a few times over and reinstalled windows twice and the problem remains. Can anyone suggest anything? Is there something I’m missing or need to set in the UEFI bios for using the onboard graphics? 
    MSI Z77A-G45, i5-3570K, 2x 8GB Corsair memory, Windows 7 64bit.
    Thanks.

    My BIOS is E7752IMS V2.10
    Iv already downloaded  V2.A
    However  I have to say the guide at uk.msi.com/service/biosupdate/ , appears to be putting v2.2 on top of v2.2.
    it also says "Download the BIOS that matches your motherboard and version number to your USB device."
    I'm not entirely sure what is meant by 'version number' but it dose suggest i need to download V2.10 not V2.A ... call me picky but i want to be sure! lol.
    Can anyone confirm ether way? It dose seam rather odd!
    Thanks.
    **edit
    Update on my graphics issue
    With the default driver, just before the windows 7 log in screen appears. I was getting a portion of it appear first on the bottom 1/8 of the screen. Now its appears to be a snowstorm of bad graphics and its the same when I switched to using HDMI instead.
    Not sure if that's a good sign!
    For reff my screen is a HP LP2475w tho I'm rather sure there is nawt wrong with the screen.

  • MSI Z77A G45 boot loop

    Hi everyone!
    I just tried to flash my MSI Z77A G45 today from the bios version 2.1 to 2.A.
    I had blackscreens all the time when i tried to flash it with the M-FLASH utility from my bios.
    Then everything just started normaly (after each blackscreen), but there wasn't any update, i tried to force the update with LiveUpdate.
    And now when i try to start the computer, i just get a blackscreen (no signal for the monitor) and a boot loop.
    It just stops and reboot after 10s.
    My hardware is working perfectly, i think this is from a corrupted bios issue.
    Which things i tried:
    - Doing a clear CMOS (nothing happens)
    - Removing the CMOS battery for 10 minutes (the reboot loop stopped, but there was not any display, i restarted the PC then and the reboot loop started again)
    - Cleaning my PC (from dust and things like that), it was not efficient at all
    - Booting from a USB key with the bios in, and formated as FAT32, nothing happens too. It doesn't recognize the USB key and anything else (keypad etc.) so the blackscreen was there again.
    My Hardware:
    CPU: Intel Core i5 3570 3.4 Ghz
    Motherboard: MSI Z77A G45
    GPU: None (Intel graphics 4000)
    RAM: 2x4Gb Corsair Vengeance
    HDD: Crucial M4 SSD 64Gb
    Power supply: Corsair 850W
    Do you think that i need to send my mother board back to the RMA?
    I hope you will be able to help me, or find a solution 
    Thanks in advance

    You can try the steps found here https://forum-en.msi.com/index.php?topic=119375.0
    Otherwise, it is RMA time.
    Next time use the forum flash tool and archives found on the forums.

  • Z77A-G45 Thunderbolt - Newer BIOS?

    Hi,
    Might be a dumb question, but can someone tell me which is a newer BIOS?
    I'm using this beta BIOS:
    https://forum-en.msi.com/index.php?topic=166102.0
    However, a newer BIOS by date appeared on the support site, but seems to be lower by version (but not beta).
    http://us.msi.com/product/mb/Z77A-G45-Thunderbolt.html#/?div=BIOS
    Which BIOS is newer/should I be using?

    from msi web is the latest one

Maybe you are looking for