Urgent Need of Emagics ZAP (Zeroloss Audio Packer)

I need to unpack files formerly packed with ZAP!
Any Help?
Best Wishes and Thank You
Bernhard

Hi,
I have been searching for ZAP version 1.5 application everywhere. I stumbled across this post & was wondering if you happened to have the De-Zap application version 1.5 or higher. I managed to find online version 1.0.1 but it gives me a header error. A friend of mine just recently passed away & he used to use this program to compress all his audio sessions. I'm trying to re-release his works to help raise money for his children. Any help with this would be greatly appreciated.
Thank You,
Chris
[email protected]

Similar Messages

HELP urgently needed: My Sandberg FireWire for Laptop will not start on my T60

Let me start with information on my T60:
OS information: Microsoft Windows XP
OS version: 5.10.2600 Service Pack 2
Processor: x86 Family 6 Model 14 Stepping 8
Memory: 3.135.856 kb
BIOS version: 2.09 (79ETC9WW)
Machine type-Model: 1951A47
I have just got a new Sandberg FireWire for Laptop, a PC Card with 3 6-pins connectiont. After inserting the card in the PC Card slot, the Windows Device Manager tells me that there are problems with the card. Looking at the 1394 Card Properties the status says:
"This device cannot start. (Code 10) - Click Troubleshoot to start the troubleshooter for this device."
The troubleshooter did not solve my problem. I have tried disconnecting, re-connection, shut down Windows and start again etc.
At Sandberg Help Desk they tell me that I have two slots in my laptop, one with a 16 bits bus and another with a 32 bits slots, and I should use the latter. It seems that I can use the lower slide only in my laptop and I cannot push the card into the upper slide. There is not enough room for it.
Here is what I found on Lenovo's support site on my type & model:
PC Card
Conforms to the PC Card Standard 95
Type II slot
Both the 16-bit Release 2.1 card standard and the 32-bit CardBus card are supported.
Have a look at these screen captures.
What should I do to solve my urgent problem!?
Message Edited by pbl_ibm on 10-09-2008 05:10 AM
Message Edited by pbl_ibm on 10-09-2008 07:27 AM
Message Edited by pbl_ibm on 10-09-2008 07:45 AM
Message Edited by pbl_ibm on 10-09-2008 07:45 AM

garytr23 wrote:
Sounds to me like a driver configuration problem. Maybe something bad happened during driver install. I would recommend uninstalling the device from device manager by right clicking on it and hitting uninstall. Reboot the computer. Have a go at it again. Also, test your pcmcia port functionality by finding and plugging in a different card. See if that works. It might need repair.
Message Edited by garytr23 on 10-09-2008 09:41 AM
The status right now is:
The PC Card reader works on my T60
If I use a Firewire PC Card it will not start - as described above (on T60)
The PC Card work properly on my T61P - and I succeeded importing a video file from a digital camera using the Fireswire PC Card.
So what does a wise man do in this situation??
Please help me as I urgently need to know how to solve this serious issue!!
Have you got an idea? Can I import the video in another way??
Message Edited by perbuch on 10-12-2008 07:55 AM

WaveStudio 7.12 (and/or Audio Pack for MP3 Support) product Help files

WaveStudio 7.2 product Help files (CTWAVE32.CHM) need to be revised to incorporate MP3 support, for those customers (like me) who have purchased the Audio Pack app for MP3 Support.
-OR-
Am I supposed to?just use the old WaveStudio 5.00.2 Help files (CTWave32.hlp)?
Also, there doesn't seem to be any way of uninstalling WaveStudio 5.00.2, unless I uninstall the whole suite of Creative MediaSource software... And that doesn't seem like very much fun at all... ? So, what, should I just leave WaveStudio 5.00.2 on the machine?

JRe: WaveStudio 7.2 (and/or Audio Pack for MP3 Support) product Help files?For anyone else experiencing this issue, the answer is:? Can't do it!? WaveStudio 5.00.20 can not be removed as a "stand-alone" application. The reason is, it's not listed as a separate program in Control Panel's Add or Remove Programs, and WaveStudio 5.00.20 has no Uninstall option.
Furthermore, WaveStudio 7.2 doesn't seem to overwrite the earlier version (it's still there and for some odd reason, it still works).
In order to remove the old version of WaveStudio, you must remove whichever Creative application that version of WaveStudio came bundled with.? Then, when you reinstall that application, WaveStudio 3.0 (or whatever iteration that application contained)?comes right back.
Therefore, the answer seems to be, you have to?li've with two versions of WaveStudio on the 'puter:? 7.2?and whatever earliest version the original bundled software?came with on the Soundblaster disc. Sad, but apparently true!? So, good day!? :smileytongue:

Macbook pro connects to wifi via safari but IE has connection problems. Has always been fine but recently stopped working. Urgently need to sort it out. Please help.

I have been running Rushcliff Private Practice Software (PPS) in a Windows environment using Parallels on a macbook pro for months. Everything has been working well. PPS needs an internet connection to allow synchronisation with colleagues using the same software.
Over the last 2 weeks, I keep losing the IE connection but am still able to connect to Wifi using Safari and other PCs.
Please can someone help? Urgently need to resolve the problem.
Many thanks.

Your issues are with notebook, not a workstation tower, and with Parallels and Windows. Maybe with Lion thrown in.
Hopefully you know where Parallels forums are and also that you installed Windows natively first on its own partition so you can test and run it direction rather than as a VM only as well as that sometimes takes the VM out of the equation.
MacBook Pro
https://discussions.apple.com/community/notebooks/macbook_pro
https://discussions.apple.com/community/mac_os?view=discussions
http://www.apple.com/support/macbookpro

Creative MP3 Audio Pack: activation expired???

Ok, I purchased "Creative MP3 Audio Pack" - from link "Click to learn about MP3 formats" in WaveStudio.
And I payed (more than year ago), and I used (more than year), and I purchased new hard dri've and reinstall new operation system...
...and what now?!
With installation of my "AudPack_PCApp_LB__0_0.exe" - I see new window in my browser "type your Activation Key and reason" - and answer:
[color="#FF0000">Your Activation Key for this software is expired. Please contact Customer Support for assistance.
Why? :smileysurprised:?Why my key is expired?!...
Ah, ok, ok, patience, just contact customer support...
And now I redig this site - to search of Customer Support - and what?!
http://support.creative.com/contact/emailform.aspx- NOT WORKED NOW!!!
500 Internal Server Error (at http://support.creative.com/Errors/GenericErrorPage.aspx?aspxerrorpath=/contact/emailform.aspx)?!
Why don't work my purchased key?! Why don't work your customer support?! Why don't work your site?
WHAT THE HELL IS GOING ON WITH MY LOVELY (at last 20 years) CREATIVE?!
P.S. Seriously: how to contact with Customer Support?

Hi,
Sorry about that, please <a rel="nofollow" href="http://support.creative.com/contact/OnlineSalesForm.aspx]try this link[/url] then click on technical assistance. That should bring you to the support form, let us know if you are still having problems accessing the page.

Creative MP3 Audio Pack not in new produc

Hey.
I have bought a X-Fi Platinum.
I have a question.. Why is it not <span class="mediumcopy">Creative MP3 Audio Pack in the drivers? When i want to record something, the alternati've is only wav and wma formats.
Where is the Mp3?
Grz // Patrick

Hi,
Sorry about that, please <a rel="nofollow" href="http://support.creative.com/contact/OnlineSalesForm.aspx]try this link[/url] then click on technical assistance. That should bring you to the support form, let us know if you are still having problems accessing the page.

HT1296 Help! I failed to back up the data on my iphone 4 16gb using iTunes Version 11.01. The error message read that the back up was corrupt. I am suppose to delete the back up. Can someone help me? I urgently need to back up the data!:\

Hi guys!
I really need help. I tried to back up the data on my iphone 4 on the iTunes version 11.01 but failed.
The error message read : the backup was corrupt or not compatible with iPhone. can anyone advise me on this,
as I urgently need to back up my phone in anticipation for my iPhone 5.
Greatly appreciated!

this usally happens when the backup you tool was from an old ios version. Two options that you can try is
1. Delete the back up by going to edit> preferences> devices & delete back up on itunes & try backing up again
2. Update the ios software of the iphone4 & then take a back up. then try restoring
Taz

HT3775 i need codec format to support audio to play movies?

i need codec format to support audio to play movies

Just download the free, open-source media player VLC. It plays pretty much anything.Get VLC here:
http://www.videolan.org/vlc/download-macosx.html
Also, beware of dodgy internet sites that say you can't play a movie and offer to install a 'codec' for you. They're typically malware or spyware.

I cant use the highlight, underline, or strikethrough function in a specific pdf file. The file isnt locked. I used to highlight texts from that file before the latest update. The problem occurs only with that file. Urgent need. Please help. Thanks!

i cant use the highlight, underline, or strikethrough function in a specific pdf file. The file isnt locked. I used to highlight texts from that file before the latest update. The problem occurs only with that file. Urgent need. Please help. Thanks!

Chester31,
Thank you very much for sharing your file with us! Now that we are able to reproduce the problem at our end, you may stop sharing the file on Acrobat.com.
Do you know when this problem (for not being able to add new highlight/strikeout/underline) has started? Did you update your iOS from 7.x to 8.0 recently?
We will continue investigating the problem and let you know what we find.
Thank you again for your help.

Help urgently needed, I have installed Logic Pro 9, since then my Final Cut Pro X keep freezing. Anyone what is wrong and how to solve it? I desperately need help on this. Thanks

Help urgently needed, I have installed Logic Pro 9, since then my Final Cut Pro X keep freezing. Anyone what is wrong and how to solve it? I desperately need help on this. Apple support says I have to pay £85 for to help me. Thanks

Just a word of advice. Never ever use the word "urgent" on this forum

Need to cancel my Adobe PDF Pack subscription

I just need to cancel my Adobe PDF Pack subscription, as I already bought Adobe Acrobat Pro IX. I have been on chat and on the phone with Customer Support for a couple of times, hours at a time. No response. I am ready to call my credit card to dispute the charge, as I have left with no options. Any suggestions?

asadams19 wrote:
I just need to cancel my Adobe PDF Pack subscription, as I already bought Adobe Acrobat Pro IX. I have been on chat and on the phone with Customer Support for a couple of times, hours at a time. No response. I am ready to call my credit card to dispute the charge, as I have left with no options. Any suggestions?
I see that your Adobe PDF Pack, Annual has already been cancelled.
Thanks!

Dose the HDMI Cable have Audio Support or do I need to use the Optical Audio Port on the ATV?

I recently noticed that the Apple TV has an "Optical Audio" port on the back, next to the HDMI port. Before I buy one, will I need to buy a Optical Audio cable, or will the HDMI cable suply sound to the TV?

HDMI carries both audio and video. The optical port is for connecting to a receiver/external speakers.

Urgently need help with this

Hi!!
I urgently need help with this:
When I compile this in Flex Builder 3 it says: The element type 'mx:Application' must be terminated by the matching end-tag '</mx:Application>'.
but I have this end tag in my file, but when I try to switch from source view to desgin view it says, that: >/mx:Script> expected to terminate element at line 71, this is right at the end of the .mxml file. I have actionscript(.as) file for scripting data.
This is the mxml code to terminate apllication tag which I did as you can see:
MXML code:
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml" layout="absolute" backgroundGradientAlphas="[1.0, 1.0]" backgroundGradientColors="[#007200, #000200]" width="1024" height="768" applicationComplete="popolni_vse()">
<mx:HTTPService id="bazaMME" url="lokalnabaza/baza_MME_svn.xml" showBusyCursor="true" resultFormat="e4x"/>
<mx:Script source="dajzaj.as"/>
<mx:states>
<mx:State name="Galerije">
    <mx:SetProperty target="{panel1}" name="title" value="Galerije MME"/>
    <mx:SetProperty target="{panel2}" name="title" value="opis slik"/>
    <mx:SetProperty target="{panel3}" name="title" value="Opis Galerije"/>
    <mx:AddChild relativeTo="{panel1}" position="lastChild">
    <mx:HorizontalList x="0" y="22" width="713.09863" height="157.39436" id="ListaslikGalerije"></mx:HorizontalList>
            </mx:AddChild>
            <mx:SetProperty target="{text1}" name="text" value="MME opisi galerij "/>
            <mx:AddChild relativeTo="{panel1}" position="lastChild">
                <mx:Label x="217" y="346" text="labela za test" id="izbr"/>
            </mx:AddChild>
            <mx:SetProperty target="{label1}" name="text" value="26. November 2009@08:06"/>
            <mx:SetProperty target="{label1}" name="x" value="845"/>
            <mx:SetProperty target="{label1}" name="width" value="169"/>
            <mx:SetProperty target="{Gale}" name="text" value="plac za Galerije"/>
        </mx:State>
        <mx:State name="Projekti"/>
    </mx:states>
<mx:MenuBar id="MMEMenu" labelField="@label" showRoot="true" fillAlphas="[1.0, 1.0]" fillColors="[#043D01, #000000]" color="#9EE499" x="8" y="24"
         itemClick="dajVsebino(event)" width="1006.1268" height="21.90141">
       <mx:XMLList id="MMEmenuModel">
             <menuitem label="O nas">
                 <menuitem label="reference podjetja" name="refMME" type="check" groupName="one"/>
                 <menuitem label="reference direktor" name="refdir" type="check" groupName="one"/>
              <menuitem label="Kontakt" name="podatMME" groupName="one" />
              <menuitem label="Kje smo" name="lokaMME" type="check" groupName="one" />
             </menuitem>
             <menuitem type="separator"/>
             <menuitem label="Galerija">
                 <menuitem label="Slovenija" name="galSvn" type="check" groupName="one"/>
                 <menuitem label="Nemčija" name="galDeu" type="check" groupName="one" />
             </menuitem>
             <menuitem type="separator"/>
             <menuitem label="projekti">
                 <menuitem label="Slovenija" name="projSvn" type="check" groupName="one"/>
                 <menuitem label="Nemčija" name="projDeu" type="check" groupName="one" />
                 <menuitem label="Madžarska" name="projHun" type="check" groupName="one"/>
             </menuitem>
         </mx:XMLList>
         </mx:MenuBar>
    <mx:Label x="845" y="10" text="25. November 2009@08:21" color="#FFFFFF" width="169" height="18.02817" id="label1"/>
    <mx:Label x="746" y="10" text="zadnja posodobitev:" color="#FFFFFF"/>
    <mx:Panel x="9" y="57" width="743.02814" height="688.4507" layout="absolute" title="Plac za Vsebino" id="panel1">
        <mx:Text x="0" y="-0.1" text="MME vsebina" width="722.95776" height="648.4507" id="Gale"/>
    </mx:Panel>
    <mx:Label x="197.25" y="748.45" color="#FFFFFF" text="Copyright © 2009 MME d.o.o." fontSize="12" width="228.73239" height="20"/>
    <mx:Label x="463.35" y="748.45" text="izdelava spletnih strani: FACTUM d.o.o." color="#FBFDFD" fontSize="12" width="287.60565" height="20"/>
    <mx:Panel x="759" y="53" width="250" height="705.07043" layout="absolute" title="Plac za hitre novice" id="panel3">
        <mx:Text x="0" y="0" text="MME novice" width="230" height="665.07043" id="text1"/>
        <mx:Panel x="-10" y="325.35" width="250" height="336.61972" layout="absolute" title="začasna panela" color="#000203" themeColor="#4BA247" cornerRadius="10" backgroundColor="#4B9539" id="panel2">
            <mx:Label x="145" y="53" text="vrednost" id="spremmen"/>
            <mx:Label x="125" y="78" text="Label"/>
            <mx:Label x="125" y="103" text="Label"/>
            <mx:Label x="0" y="53" text="spremenljivka iz Menuja:"/>
            <mx:Label x="45" y="78" text="Label"/>
            <mx:Label x="45" y="103" text="Label"/>
        </mx:Panel>
    </mx:Panel>
    <mx:Label x="9.9" y="10" text="plac za naslov MME vsebine" id="MMEnaslov" color="#040000"/>
     </mx:states></mx:Application>

I know it's been a while but… did you fix this?
It looks to me like you are terminating the <mx:Application> tag at the top. The opening tag should end like this: resultFormat="e4x">, not resultFormat="e4x"/> (Remove the /).
Carlos

Hello, had to move to mavericks lost quicktime Pro, Need the feature for looping audio sections repeatedly, I have the install Key from my old QT Pro version, any ideas?

Hello, had to move to mavericks lost quicktime Pro, Need the feature for looping audio sections repeatedly, I have the install Key from my old QT Pro version, any ideas?

If QuickTime Player 7 isn't in the Utilities folder automatically, you can install it separately. See:
http://support.apple.com/kb/HT3678
Instructions on how to register your QuickTime Pro key can be found in that same document.
Regards.

Urgent,need for code in bdc for co02

hi all,
im in urgent need of code for developing bdc tcode co02.
Thanks for your help..

1. Please record the transaction which you need to change the data in Co02 (Shop Order/Prod. Order)
2. Create BDC program as normally you do it for normal BDC programs..
Smaple Code with Recording.
clear: bdcdata,messtab.
perform bdc_dynpro using: 'SAPLCOKO1' '0110'.
perform bdc_field using: 'CAUFVD-AUFNR' t_aufk-aufnr.
perform bdc_field using: 'R62CLORD-FLG_OVIEW' 'X'.
perform bdc_field using: 'BDC_OKCODE' '/00'.
perform bdc_dynpro using: 'SAPLCOKO1' '0115'.
perform bdc_field using: 'BDC_SUBSCR' 'SAPLCOKO1'.
perform bdc_field using: 'BDC_OKCODE' '=KOWE'.
perform bdc_dynpro using: 'SAPLCOKO1' '0115'.
perform bdc_field using: 'BDC_SUBSCR' 'SAPLCOKO1'.
perform bdc_field using: 'BDC_CURSOR' 'AFPOD-INSMK'.
   perform bdc_field using: 'AFPOD-INSMK' 'S'.
perform bdc_field using: 'BDC_OKCODE' '=BU'.
call transaction 'CO02' using bdcdata mode 'A'
                                        update 'S'
                                        messages into messtab.
Thanks,

Urgent Need of Emagics ZAP (Zeroloss Audio Packer)

Similar Messages

Maybe you are looking for