Urgent need pls post me the answers immediatley

what is material movements and what r the accounting documents associated with it?
whats meant by open orders that are on hold?
whats material change varience?
waht are delivery blocks?
what is Bom ,what does it contains?

what is material movements and what r the accounting documents associated with it?
Material movement as the name suggests associates with documents created with reference to movement of the documents(with or without reference to a document) out a a location to another. Each movement document usually has a financial impact and hence a corresponding G/L enteries are effected.

Similar Messages

HT1296 Help! I failed to back up the data on my iphone 4 16gb using iTunes Version 11.01. The error message read that the back up was corrupt. I am suppose to delete the back up. Can someone help me? I urgently need to back up the data!:\

Hi guys!
I really need help. I tried to back up the data on my iphone 4 on the iTunes version 11.01 but failed.
The error message read : the backup was corrupt or not compatible with iPhone. can anyone advise me on this,
as I urgently need to back up my phone in anticipation for my iPhone 5.
Greatly appreciated!

this usally happens when the backup you tool was from an old ios version. Two options that you can try is
1. Delete the back up by going to edit> preferences> devices & delete back up on itunes & try backing up again
2. Update the ios software of the iphone4 & then take a back up. then try restoring
Taz

Urgent : Need help to open the contacts / Returns screen from ICWeb Client

Hi Gurus,
I have no much information on PCUI. I need your help to the following:
1--> To open the Contacts / Returns PCUI screen from ICWeb client. (which object to be used)
2--> Pass the confirmed BP to the newly opened window.
Please give me your valuable inputs.
Hoping for the best and the earliest.
Regards,
Raju
Edited by: reg raju on Apr 22, 2008 3:36 PM

Hi Gurus,
I have no much information on PCUI. I need your help to the following:
1--> To open the Contacts / Returns PCUI screen from ICWeb client. (which object to be used)
2--> Pass the confirmed BP to the newly opened window.
Please give me your valuable inputs.
Hoping for the best and the earliest.
Regards,
Raju
Edited by: reg raju on Apr 22, 2008 3:36 PM

HI PLS SEND ME THE ANSWERS

HI friends plz send me the answers
What are the steps to be followed while doing enhancement?
How do you find particular key figure is coming from particular data target?
How to load data duplicate without over writing?
You are running process chains without manually how can you compress cube?
What is reconciliation can you describe it?
What is recording process?
What is the dynamic selection criterion in sapbw? Where they will use it? What is purpose of that?
with regards
sridhar

Hi,
Pls check SAP BW Interview Question !
on BW interview questions.
Eddy
PS. Reward the useful answers and you will get <a href="/people/baris.buyuktanir2/blog/2007/04/04/point-for-points-reward-yourself">one point</a> yourself!

PLS GIVE ME THE ANSWERS

1 ) foreign key where we have to used in report program ?
2) What r the disadvantages of alv report?
3) Is it possible to have a loop inside a sapscript?
4) how do u format the data b4 the write statement
5) how do u send the table with data to the production s/m r any other client
6)diff between alv(function module ) and alv(oo abap).
8)who will take care abt the data while passing to appplication server
9)what r the steps in moving the data or database between servers
10)in creating varient how to give possible values for the field to run in background
11)) Can I know any way we can identify duplicate entries for vendor's
invoice? Is it we able to find this info through sap existing screen?
or need to generate using abap query?
Below is the information need to generate for the duplicate invoice:
- Vendor code
- Invoice No
- Invoice amount & currency
- Invoice Date (from 1st Jan '07 - 31st Dec '07)
- SAP Doc. no.
13). in what way you convert classical report into alv report...
14). in bdc, i develop in va01, with 5 line items, but in onsite server, it shows 8 line items. how u will change or correct to make both the systems to be with 5 line items.
15). in scripts, you are making many changes to a po and how you will make it to take effect...
16) can any one please tell me the method to create a purcahse requisition without giving PLANT number

3) We can use loop inside a script.
4)We can format according write syntax in whatever manner.Check F1 help for write.
5)If table has entries and if you transport the table request with entries then it will be automatically available in destination system.
6)In regular ALV we use function modules for achieving the final report like for ex:- for field catalogue REUSE_ALV_FIELDCATALOGUE
for Events - REUSE_EVENT etc
You can check all these in SLIS.
In object oriented ALV we directly do the interaction with classes. So this will be more performance than regular ALV.We can tune our report more comfortably with the methods available in that.
Reward points if helpful
Regards,
RamaKrishna C

Integrae product key and license : urgent need pls conside this

Hi All,
I am new to java windows based applications.Now i am creating one product.I wants to integrate some license agreement with the customer.once,he is installed his system it will work only valid for months or yearly license agreement.once the date is expired the product is won't be allow to the customer to work with this product.
How to do this????.please help me.Its very urgent,i will except your good reply.pls
thanks
vijay

Let's just skip over the long debate about why this is pointless and just cut to the chase of doing what you want shall we?
Turn your application into a web application, where all the important code is only executed on the server and that server is under your control.
Or. Don't do anything like this.

Urgent - Need to know that the changed roles are saved in which request ?

Hi *,
I was required to include a query in a specified role. I went to T-code PFCG, gave the role name and went into the changed mode. Then in the authorization data, I assigned the query. After that I saved and clicked on Generate button.
Now, I want to know these changes are captured in which request ?
Please guide me the possible ways so that I can assign points for the useful answers.
Regards,
Srinivas

Dear Srinivas D Rao ,
Once the changes are done ,it will be captured in IDOC and you go to bd87 transaction and give message type and press execute...
Check in su53 Authorization check transaction
Also
To see Authorization a User has through
transaction suim.
--> users by complex selection criteria
>by authorization values
> Enter authorization object "F_BKPF_BUK "
>press enter and enter company code
execute ... you will find the users
You need to find roles assigned to the user first then go to table agr_1252 anf give the value $BUKRS along with the role names.
Also check tables UST12 and AGR_1251.
Hope it helps
Regards
Bala

HT1918 i need to find out the answers to my security questions but i don't know how

Please help me.

Welcome to the Apple community.
You might try to see if you can change your security questions. Start here, change your country if necessary and go to manage your account > Password and Security.
I'm able to do this, others say they need to input answers to their current security questions in order to make changes, I'm inclined to think its worth a try, you don't have anything to lose.
If that doesn't help you might try contacting Apple through Express Lane (select your country, navigate to iCloud help and enter the serial number of one of your devices)

WebHelp - What Files Need to be Posted on the Sever

Hello,
can anyone tell me what files & folders I need to post to
the sever to enable my project to run. I have just developed a
small project and in the folder where it is saved there are two
folders and 44 other files inc the .xpj file.
Can you help
Tony

Colum & Leon I fear that I have missed a step in the
process.
What I have done so far is produced my First Topic (the
welcome screen) placed three books (one nested inside the other)
and in the final book added a topic which consists of an Excel
sheet which has been converted to .html format.
To ensure that the changes took effect I clicked on the View
Primary Layout button and I was given the prompt ‘WebHelp
output is out of date. Would you like to compile before
running’ I clicked yes. RoboHelp then generated / compiled
the project and I checked to see that the changes took effect.
I then went to the relevant folder on the sever and delete
the previous version and pasted in all the files and folders from
the ‘development’ folder.
As you can see I have missed out on the Publish function and
have also failed to locate it! So that is my first concern.
When I copied the files I copied ALL the files & folders
(high level) – to be more precise the [!SkinSubFolder!] &
[!SSL!] folders and Files.
Would I be correct in saying that I should have only copied
the files and folders within the [WebHelp] folder (i.e.
\!SSL!\WebHelp\) and have the link from the intranet page point to
my first topic.
Newbie at this end

Can someone answer this post in the Mac forum?

b noir or Pac or anyone?
http://discussions.apple.com/thread.jspa?threadID=696413&tstart=0
M

Good catch, I replied too it. Usually when I see post and it says they have a mac I just reply...
"This is itunes for windows, if your doing this on a mac you need to post in the itunes for mac forum for better help"
I do that because sometimes even tho it says mac there doing it on there PC or a friends PC.

Urgent need lsmw with directinput

hi folks,
i am in urgent need
i am using the program RSADRLSM02 for the uploading of the bisiness address services/regionla structure with lsmw using directinput method
i finished all the steps but at the end i am getting struck it is asking for the logical file i don't have any knowledge about it how to create or choose the corresponding logical file related to this program
please can anyone guide me to solve this
thanks in advanse
naveen

Hai Naveen
I will send you some steps for Transaction Code MM01
Please do the steps and got any error get back to me
Using Tcode MM01 -- Maintain the source fields are
1) mara-amtnr char(18)
2) mara-mbrsh char(1)
3) mara-mtart char(4)
4) makt-maktx char(40)
5) mara-meins char(3)
the flate file format is like this as follows
MAT991,C,COUP,Srinivas material01,Kg
MAT992,C,COUP,Srinivas material02,Kg
AMT993,C,COUP,Srinivas material03,Kg
MAT994,C,COUP,Srinivas material04,Kg
MAT995,C,COUP,Srinivas material05,Kg
goto Tcode LSMW
give Project Name
     Subproject Name
     object Name
Press Enter -
Press Execute Button
It gives 13 radio-Button Options
do the following 13 steps as follows
1) select radio-Button 1 and execute
   Maintain Object Attributes
select Standard Batch/Direct Input
   give Object -- 0020
       Method -- 0000
   save & Come Back
2) select radio-Button 2 and execute
   Maintain Source Structures
   select the source structure and got to click on create button
   give source structure name & Description
   save & Come Back
3) select radio-Button 3 and execute
   Maintain Source Fields
   select the source structure and click on create button
   give
   first field
        field name    matnr
        Field Label   material Number
        Field Length 18
        Field Type    C
   Second field
        field name    mbrsh
        Field Label   Industrial Sector
        Field Length 1
        Field Type    C
   Third field
        field name    mtart
        Field Label   material type
        Field Length 4
        Field Type    C
   fourth field
        field name    maktx
        Field Label   material description
        Field Length 40
        Field Type    C
   fifth field
        field name    meins
        Field Label   base unit of measurement
        Field Length 3
        Field Type    C
save & come back
4) select radio-Button 4 and execute
   Maintain Structure Relations
   go to blue lines
      select first blue line and click on create relationship button
      select Second blue line and click on create relationship button
      select Third blue line and click on create relationship button
save & come back
5) select radio-Button 5 and execute
   Maintain Field Mapping and Conversion Rules
   Select the Tcode and click on Rule button there you will select constant
   and press continue button
   give Transaction Code : MM01 and press Enter
   after that
   1) select MATNR field click on Source filed(this is the field mapping) select MATNR and press Enter
   2) select MBRSH field click on Source filed(this is the field mapping) select MBRSH and press Enter
   3) select MTART field click on Source filed(this is the field mapping) select MTART and press Enter
   4) select MAKTX field click on Source filed(this is the field mapping) select MAKTX and press Enter
   5) select MEINS field click on Source filed(this is the field mapping) select MEINS and press Enter
finally
save & come back
6) select radio-Button 6 and execute
   Maintain Fixed Values, Translations, User-Defined Routines
   give FIXED VALUE Name & Description as MM01
   come back
7) select radio-Button 7 and execute
   Specify Files
   select On the PC (Frontend) -- and click on Create button(f5)
                                  give the path of the file like "c:\material_data.txt"
                                  description : -
                                  separators as select comma radiao- button
   and press enter   save & come back
8) select radio-Button 8 and execute
   Assign Files
   Save & come back
9) select radio-Button 9 and execute
   Read Files
   Execute
   come back
   come back
10) select radio-Button 10 and execute
    Display Imported Data
    Execute and press enter
    come back
    Come back
11) select radio-Button 11 and execute
    Convert Data
    Execute
    come back
    Come back
12) select radio-Button 12 and execute
    Display Converted Data
    Execute & come back
13) select radio-Button 13 and execute
    Start Direct Input Program
   select the Program
   select continue button
go with via physical file
give the lock mode as 'E'
and execute
Thanks & regards
Sreenivasulu P

Depreciation - Post in the Previous Year

Hi,
I am trying to post the depreciation for Jan 2010, but the system is giving the error that I need to post in the preious year first.
However when i am trying to post the depreciation for the previous year, its giving the error that previous year is closed. Can anybody help me how to resolve this issue. Thanks.
Regards,
S.Sumana.

Hello Sumana,
I have encountered similar issue in one of my clients. What you need to do to remedy the situation is that you need to open the Asset fiscal year in OAAQ and then post depreciation month wise till the current year start. For posting depreciation you also need to open the old accounting period but if there were no asset postings in previuos years then you do not have that risk of anything getting posted in books(which are already closed) in those prior fiscal years. This was from books point of view you maintain status quo.
Close the previous asset years and posting years once you are done with depreciation posting for a particular year.
After you come upto date you can run the depreciation normally in current year.
Regards,
Vijay

Installation problem, please help, urgent needs,

I have install the FCP 7 into my MBP, and updated, but in the "add behavior" tap i don't have those new behavior like "text-basic" "text-continuous" "text-energetic" etc..... how can i add it back?
urgent needs, please help

fixed

How to find the answer to my question? it was on downloads.

wheni try to open download and error message comes, such as
"can not find or open home/'named' folder'" or
"can not find source file" or
"an error occurred"

If you posted a question and you want to see if someone replied an answer to your problem= Go to the forum home page and sign into the forum. At the top of the list of posts where it says Show: All | Unsolved | Solved | No Replies | My Contributions, click on my contributions and it'll show the list of your posts and the answers to your questions if anyone has replied to em'.

HT1725 I don't know the answers to the security questions

I need to find out the answers to the security questions

Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

Urgent need pls post me the answers immediatley

Similar Messages

Maybe you are looking for